and export the geometry out to VVVV to render it LIVE! RawRRRR. In this case, a digital audio workstation Ableton Live, a leading industrial standard in contemporary music production.
the good news is that VVVV and ableton live lite is both free.
https://www.ableton.com/en/products/live-lite/
i am not trying to use ipad as a controller for grasshoppper. I wanted to work with a timeline (similar to MAYA or Ableton or any other DAW(digital audio workstation)) inside grasshopper in an intuitive way. Currently there is no way of SEQUENCING your definition the way you want to see that i know of.
no more combersome export import workflows... i dont need hyperrealistic renderings most of the time. so much time invested in googling the right way to import, export ... mesh settings...this workflow works for some, for some not ...that workflow works if ... and still you cannot render it live nor change sequence of instruction WHILE THE VIDEO is played. and I think no one wants to present rhinoceros viewport. BUT vvvv veiwport is different. it is used for VJing and many custom audio visual installation for events, done professionally. you can see an example of how sound and visuals come together from this post, using only VVVV and ableton. http://vvvv.org/documentation/meso-amstel-pulse
I propose a NEW method. make a definition, wire it to ableton, draw in some midi notes, and see it thru VVVV LIVE while you sequence the animation the WAY YOU WANT TO BE SEEN DURING YOUR PRESENTATION FROM THE BEGINNING, make a whole set of sequences in ableton, go back change some notes in ableton and the whole sequence will change RIGHT INFRONT of you. yes, you can just add some sound anywhere in the process. or take the sound waves (sqaure, saw, whateve) or take the audio and influence geometric parameters using custom patches via vvvv. I cannot even begin to tell you how sophisticated digital audio sound design technology got last ten year.. this is just one example which isn't even that advanced in todays standard in sound design ( and the famous producers would say its not about the tools at all.) http://www.youtube.com/watch?v=Iwz32bEgV8o
I just want to point out that grasshopper shares the same interface with VVVV (1998) and maxforlive, a plug in inside ableton. audio mulch is yet another one that shares this interface of plugging components to each other and allows users to create their own sound instruments. vvvv is built based on vb, i believe.
so current wish list is ...
1) grasshopper recieves a sequence of commands from ableton DONE
thanks to sebastian's OSCglue vvvv patch and this one http://vvvv.org/contribution/vvvv-and-grasshopper-demo-with-ghowl-udp
after this is done, its a matter of trimming and splitting the incoming string.
2) translate numeric oscillation from ableton to change GH values
video below shows what the controll interface of both values (numbers) and the midi notes look like.
https://vimeo.com/19743303
3) midi note in = toggle GH component (this one could be tricky)
for this... i am thinking it would be great if ...it is possible to make "midi learn" function in grasshopper where one can DROP IN A COMPONENT LIKE GALAPAGOS OR TIMER and assign the component to a signal in, in this case a midi note. there are total 128 midi notes (http://www.midimountain.com/midi/midi_note_numbers.html) and this is only for one channel. there are infinite channels in ableton. I usually use 16.
I have already figured out a way to send string into grasshopper from ableton live. but problem is, how for grasshopper to listen, not just take it in, and interpret midi and cc value changes ( usually runs from 0 to 128) and perform certain actions.
Basically what I am trying to achieve is this : some time passes then a parameter is set to change from value 0 to 50, for example. then some time passes again, then another parameter becomes "previewed", then baked. I have seen some examples of hoopsnake but I couldn't tell that you can really control the values in a clear x and y graph where x is time and y is the value. but this woud be considered a basic feature of modulation and automation in music production. NVM, its been DONE by Mr Heumann. https://vimeo.com/39730831
4) send points, lines, surfaces and meshes back out to VVVV
5) render it using VVVV and play with enormous collection of components in VVVV..its been around since 1998 for the sake of awesomeness.
this kind of a digital operation-hardware connection is usually whats done in digital music production solutions. I did look into midi controller - grasshopper work, and I know its been done, but that has obvious limitations of not being precise. and it only takes 0 o 128. I am thinking that midi can be useful for this because then I can program very precise and complex sequence with ease from music production software like ableton live.
This is an ongoing design research for a performative exhibition due in Bochum, Germany, this January. I will post definition if I get somewhere. A good place to start for me is the nesting sliders by Monique . http://www.grasshopper3d.com/forum/topics/nesting-sliders
…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
ing the maps to the broader community.
At the moment, there are just a few known issues left that I have to fix for complex geometric cases but they should run smoothly for most energy models that you generate with Honeybee. Within the next month, I will be clearing up these last issues and, by the end of the month, there will be an updated youtube tutorial playlist on the comfort tools and how to use them.
In the meantime, there's an updated example file (http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map) and I wanted to get you all excited with some images and animations coming out of the design part of my thesis. I also wanted to post some documentation of all of the previous research that has made these climate maps possible and give out some much deserved thanks. To begin, this image gives you a sense of how the thermal maps are made by integrating several streams of data for EnergyPlus:
(https://drive.google.com/file/d/0Bz2PwDvkjovJaTMtWDRHMExvLUk/view?usp=sharing)
To get you excited, this youtube playlist has a whole bunch of time-lapse thermal animations that a lot of you should enjoy:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A
To give a brief summary of what you are looking at in the playlist, there are two proposed designs for completely passive co-habitation spaces in New York and Los Angeles.
These diagrams explain the Los Angeles design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJM0JkM0tLZ1kxUmc/view?usp=sharing)
And this video gives you and idea of how it thermally performs:
These diagrams explain the New York design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJS1BZVVZiTWF4MXM/view?usp=sharing)
And this video shows you the thermal performance:
Now to credit all of the awesome people that have made the creation of these thermal maps possible:
1) As any HB user knows, the open source engines and libraries under the hood of HB are EnergyPlus and OpenStudio and the incredible thermal richness of these maps would not have been possible without these DoE teams creating such a robust modeler so a big credit is definitely due to them.
2) Many of the initial ideas for these thermal maps come from an MIT Masters thesis that was completed a few years ago by Amanda Webb called "cMap". Even though these cMaps were only taking into account surface temperature from E+, it was the viewing of her radiant temperature maps that initially touched-off the series of events that led to my thesis so a great credit is due to her. You can find her thesis here (http://dspace.mit.edu/handle/1721.1/72870).
3) Since the thesis of A. Webb, there were two key developments that made the high resolution of the current maps believable as a good approximation of the actual thermal environment of a building. The first is a PhD thesis by Alejandra Menchaca (also conducted here at MIT) that developed a computationally fast way of estimating sub-zone air temperature stratification. The method, which works simply by weighing the heat gain in a room against the incoming airflow was validated by many CFD simulations over the course of Alejandra's thesis. You can find here final thesis document here (http://dspace.mit.edu/handle/1721.1/74907).
4) The other main development since the A. Webb thesis that made the radiant map much more accurate is a fast means of estimating the radiant temperature increase felt by an occupant sitting in the sun. This method was developed by some awesome scientists at the UC Berkeley Center for the Built Environment (CBE) Including Tyler Hoyt, who has been particularly helpful to me by supporting the CBE's Github page. The original paper on this fast means of estimating the solar temperature delta can be found here (http://escholarship.org/uc/item/89m1h2dg) although they should have an official publication in a journal soon.
5) The ASHRAE comfort models under the hood of LB+HB all are derived from the javascript of the CBE comfort tool (http://smap.cbe.berkeley.edu/comforttool). A huge chunk of credit definitely goes to this group and I encourage any other researchers who are getting deep into comfort to check the code resources on their github page (https://github.com/CenterForTheBuiltEnvironment/comfort_tool).
6) And, last but not least, a huge share of credit is due to Mostapha and all members of the LB+HB community. It is because of resources and help that Mostapha initially gave me that I learned how to code in the first place and the knowledge of a community that would use the things that I developed was, by fa,r the biggest motivation throughout this thesis and all of my LB efforts.
Thank you all and stay awesome,
-Chris…
ve Intermediate Insight of Computational Design Strategies While Exploring Rangoli Art form in 2 Dimension and 3Dimesion in which Participants will not only be trained to Digitally Design using Parametric software's but they will also be trained to Fabricate them in reality.
This Course will be explored in manner where Participants will understand inter-dependency of Rhinoceros3D & Grasshoper3D through a unique Hybrid Teaching Method While Exploring Rangoli Geometry .
The course will also take participants through Topics such as - Computational Thinking, - Computational / Parametric Design, - Computational Rangoli Exploration, - Digital Fabrication, - 3D Visualization ( Rhino3D 6), - Making Info-graphics & Design Diagrams ( Rhino3d 6 ).
Participants will also be doing a Project at the last Leg of Workshop in which they will implement the skill they gained in first Few Weeks.
{ Tutor } Nitant Pixelkar (Computational Artist / Designer, Mumbai)
Nitant Hirlekar A.k.a. Pixelkar, is a Computational Artist. He graduated from Rachana Sansad school of Interior Design 2011, Mumbai. In Academics He Bagged Two Gold and One Silver Medal on National Level.
In his post academic days, he came across the Emerging Computational Techniques in Design industry in which Algorithm serves as a main Functional part. He uses Algorithms to Deconstruct the Captured images in Pixelated form using the Grid of the Desired Indian Art Forms.
He Heads Collective Group Named "Mutation Lab” which is a multidisciplinary Design & Art Cell. Where they Explore Computational Approach while Designing Various Scales Spatial Installation, Digital Fabrication, Interactive Installations and Computational Consultancy for Various Architects.
He has exhibited his first artwork in Kalaghoda Arts Festival for in 2014 And further in 2016 and 2017.In 2015 he exhibited in Dharavi Biennale” organized by Wellcome Trust,London & Sneha Organisation, Mumbai Which was internationally acclaimed. In 2016 he got Featured on a TV show - The Creative Indian's as an Absolut Creative Indian of the Week.
Academically he is been involved in Many Computational Design Workshops / Elective Studios for School of Interior Design (Rachna Sansad), LS Raheja College of Architecture & Rat-Lab (Delhi).
{ Participants } The Course is aimed at Architecture, Interior Design, Product Design,Furniture Design & Fashion Design Students and Professionals. However we would be thrilled to have any Interdisciplinary Artist / Creator/ Maker to join the Course as well.
{ Level }
Intermediate
{ Timing } Monday To Friday - 6:00 PM to 9:00 PM (15 Hours/ Week = 5 Week X 15 Hours = 75 Hours )
{ Dates } Registration Ends - 24th April 2020 **Subejct to Availablity
{ Workshop Dates } 4th May 2020 To 5th June 2020
{ Venue } Lower Parel,Mumbai ( Details To Be Announced )
{ Schedule }
{Registration Form}…
stributes structural supports for a uniformly loaded domain using e.g. the internal energy of the loaded domain as fitness. Here the uniformly loaded domain is represented by the trimmed surface. My genomes are the support positions (green crosses), which are restricted to a set of predefined grid points. I’m currently using an (i,j)-coordinate indexing for these grid points (illustrated in the viewport just below) as opposed to a sequential , “one-dimensional” numbering (illustrated in the viewport further down).
(i,j)-indexing systemAltenative, sequential indexing system
The support positions are computed by two gene pools; one governing the i-index, Gene List {i}, and one governing the j-index, Gene List {j}, of each support. The value of slider 0 in Gene List {i} is paired with the value of slider 0 in Gene List {j} etc. and the amount of sliders corresponds to the amount of supports. The screen shot below depicts the slider constellation corresponding to the support distribution depicted above. Unfortunately the j-index represented in the sliders needs remapping as the number of j-indices vary for each i-index (horizontal row of grid points). With the current setup I have 12^6 x 9^6 = 1,6 x 10^12 different genomes. If I were to use the sequential, “one-dimensional” numbering, I would only use one gene pool with sliders ranging from 0 to 76 meaning that remapping could be avoided and thereby having only 76^6 = 1,9 x 10^11 different genomes.
So, my current genome setup causes a bunch of issues related to the Evolutionary Solver: Remapping Changing one of the j-index sliders, will not necessarily change the related support position but it will still facilitate another genome to be calculated by the solver. (This problem could be eliminated by using the sequential, “one-dimensional” numbering)
Switching slider values around If the values of e.g. slider 0 were to be switched around with the values of slider 5, this again would yield a new genome but an identical solution. (This problem cannot be eliminated by using the sequential, “one-dimensional” numbering)
Coincident support positions Two or more supports may be located in the same position. (This problem cannot be eliminated by using the sequential, “one-dimensional” numbering)
I find it impossible to imagine the fictive “fitness landscape” of this problem and not only because of the multidimensional genome characteristic but just as much because of these listed, intertwined peculiarities. I’ve tried running the Simulated Annealing Solver as well, but my experience is that the Evolutionary Solver yields better results. To my awareness, the solver uses some kind of topographical proximity searcher. This is why, I think that the solving process itself benefits more from analysing the (i,j)-index system, in which neighbouring grid points hold more uniform topographical information than the sequential, “one-dimensional” numbering, which might have big ID-numbering gaps between neighbours. Have I understood this correctly?
Cheers…
inner As Curve() = section.ToNurbsCurve().Offset(normal, pc, -plate, 1e-3, 1e-4, Rhino.Geometry.CurveOffsetCornerStyle.Sharp)
the error message is:
"
{0}0. Error: Het oplossen van de overbelasting is mislukt omdat dit aantal argumenten door geen enkele toegankelijke Offset wordt geaccepteerd. (line 104)
"
this is the VBA script:
"Option Strict OffOption Explicit On'Import SDK and Framework namespacesImports RhinoImports Rhino.GeometryImports Rhino.CollectionsImports GrasshopperImports Grasshopper.KernelImports Grasshopper.Kernel.DataImports Grasshopper.Kernel.TypesImports GH_IOImports GH_IO.SerializationImports SystemImports System.IOImports System.XmlImports System.DataImports System.DrawingImports System.ReflectionImports System.CollectionsImports System.Windows.FormsImports Microsoft.VisualBasicImports System.Collections.GenericImports System.Runtime.InteropServices'Code generated by Grasshopper(R) (except for RunScript() content and Additional content)'Copyright (C) 2011 - Robert McNeel & Associates<System.Runtime.CompilerServices.CompilerGenerated()> _Public Class Script_Instance Implements IGH_ScriptInstance#Region "Members" ''' <summary>List of error messages. Do not modify this list directly.</summary> Private __err As New List(Of String) ''' <summary>List of print messages. Do not modify this list directly, use the Print() and Reflect() functions instead.</summary> Private __out As New List(Of String) ''' <summary>Represents the current Rhino document.</summary> Private doc As RhinoDoc = RhinoDoc.ActiveDoc ''' <summary>Represents the Script component which maintains this script.</summary> Public owner As Grasshopper.Kernel.IGH_ActiveObject#End Region#Region "Utility functions" ''' <summary>Print a String to the [Out] Parameter of the Script component.</summary> ''' <param name="text">String to print.</param> Private Sub Print(ByVal text As String) __out.Add(text) End Sub ''' <summary>Print a formatted String to the [Out] Parameter of the Script component.</summary> ''' <param name="format">String format.</param> ''' <param name="args">Formatting parameters.</param> Private Sub Print(ByVal format As String, ByVal ParamArray args As Object()) __out.Add(String.Format(format, args)) End Sub ''' <summary>Print useful information about an object instance to the [Out] Parameter of the Script component. </summary> ''' <param name="obj">Object instance to parse.</param> Private Sub Reflect(ByVal obj As Object) __out.Add(GH_ScriptComponentUtilities.ReflectType_VB(obj)) End Sub ''' <summary>Print the signatures of all the overloads of a specific method to the [Out] Parameter of the Script component. </summary> ''' <param name="obj">Object instance to parse.</param> Private Sub Reflect(ByVal obj As Object, ByVal method_name As String) __out.Add(GH_ScriptComponentUtilities.ReflectType_VB(obj, method_name)) End Sub#End Region ''' <summary> ''' This procedure contains the user code. Input parameters are provided as ByVal arguments, ''' Output parameter are ByRef arguments. You don't have to assign output parameters, ''' they will be null by default. ''' </summary> Private Sub RunScript(ByVal p0 As Point3d, ByVal p1 As Point3d, ByVal p2 As Point3d, ByVal pc As Point3d, ByVal plate As Double, ByVal itt As Integer, ByVal dev As Double, ByRef crvout As Object, ByRef crvin As Object, ByRef sec As Object, ByRef opp As Object, ByRef div As Object, ByRef pt4 As Object) 'your code goes here… opp = "test01" Dim section As New Polyline(5) section.Add(p0) section.Add(p1) section.Add(p2) section.Add(pc) section.Add(p0) Dim normal As Vector3d = vector3d.CrossProduct((p1 - p0), (p2 - p0)) Dim area As Double Dim chicken_int As Int32 = 0 Dim XX As Double Dim YY As Double Do chicken_int += 1 If (chicken_int > itt) Then Exit Do 'Compute the section offset Dim inner As Curve() = section.ToNurbsCurve().Offset(normal, pc, -plate, 1e-3, 1e-4, Rhino.Geometry.CurveOffsetCornerStyle.Sharp) Dim edges As New CurveList(inner) edges.Add(section.ToNurbsCurve()) crvin = edges Dim sections As Brep() = Brep.CreatePlanarBreps(edges) If (sections Is Nothing) Then Exit Do opp = "test02" 'Compute the centroid of the current section Dim am As AreaMassProperties = AreaMassProperties.Compute(sections(0)) Dim ct As Point3d = am.Centroid XX = am.CentroidCoordinatesMomentsOfInertia.X YY = am.CentroidCoordinatesMomentsOfInertia.Y area = am.Area Dim dx As Vector3d = pc - ct 'Compute the error of the current centroid Dim dl As Double = dx.Length div = dl 'Update output values crvout = section crvin = inner sec = sections(0) opp = area If (dl < dev) Then Exit Do 'Adjust outline with a boosting factor. section(3) += dx * 4 Loop pt4 = section(3) crvout = section End Sub '<Custom additional code> '</Custom additional code> End Class
"…
to incorporating math and geometry in computational design education, Paneling Tools
Marlo Ransdell, PhD Creative Director, at FSU , Digital Fabrication in Design Research and Education
Andy Payne, LIFT architects | Harvard GSD | FireFly
Jay H Song, Chair, Jewelry School of Design, Jewelry as Personal Expression, Extra+Ordinary@Jewelry.com
Pei- Jung (P.J.) Chen, Professor of Jewelry, SCAD
Gustavo Fontana, designer/co-founder nimbistand, Diseñar, desarrollar y comercializar productos por tu cuenta.
Joe Anand, CEO MecSoft Corporation, RhinoCAM
Julian Ossa, Chair, Industrial Design Director, Diseño – Una opción de vida a todo vapor!, UPB
Minche Mena, SHINE Architecture, Principal
J. Alstan Jakubiec, Daylighting and Environmental Performance in Architectural Design Solemma, LLC
Carlos Garnier R&D Director / Jaime Cadena – General Director, Plug Design, www.plugdesign.com.mx
Mario Nakov, www.chaosgroup.com [ V-Ray ]
Andres Gonzalez, RhinoFabStudio
Workshops:
o) Paneling Tools
o) RhinoCAM
o) Rhinology in Design, for Jewelry
o) Footwear
o) V-Ray: Jewelry Design
o) V-Ray: Architects and Industrial Designers
o) FireFly
o) J. Alstan Jakubiec, DIVA
The cost for each workshop or the Lectures is 95.0 US$
To register:
WORK-SHOPS April 2 - RHINO DAY
WORK-SHOPS April 3 - RHINO DAY
REGISTRATION RHINO DAY
NOTE: All students and faculty members that register to this event, will receive a Rhino 5 Educational License at the event.
…
I live on my computer and I even sleep with it, so learning all this is probably within my reach but I'm a complete beginner as of now.
I'm downloading the 32 bit version of rhino 5 since the 64 bit doesn't seem to work with your downloads Jon.
I haven't grasped everything you have made yet Jon I can't even begin to understand what your IFC stuff is actually capable of, but just to be clear I'm not interested in solely being able to tell that something is colliding as there are already software that can do that beautifully. What I want to do is bypass that step altogether by never having collision-checking back and forth go on, even collisions which aren't physical collisions, but rather just violations by code. The simplest way to do this would be to simply make the geometry of the beams 2 feet wider than they are in real life, so that way you could put a light right next to the 'over-sized' beam and it would still be within the rules. But that would be extremely primitive and I'm sure there's a way to do it mathematically.
Just to clarify, I'm the fire sprinkler designer in the architectural circus. The sprinkler designer (me) doesn't really get the luxury of telling the other trades that they're colliding with my stuff and they should move. Rather, I get their drawings, find out I'm colliding with them, and move around them. So it would be of great use to me to have this be automatic - that is, to automatically space my sprinklers the neccesary distance away from all obstructions. There are different spacing rules for different obstructions - walls, beams, open web steel, unit heaters, hvac ducts depending on how wide the ducts are, lights, fans, high rack storage, basically anything that would obstruct the water spray from a sprinkler needs to be taken into account and spaced away from.
It's therefore a very attractive idea to be able to just draw a rectangle (representing the walls of a simple room) for instance, have the sprinklers automatically spaced as far apart as possible within the rectangle according to the rulebooks (to minimize the amount of sprinklers needed which minimizes the material cost of the job).
Then add obstructions inside the rectangle, such as a beam, and have the sprinklers relocate themselves or add new sprinklers to accommodate for the new obstruction.. Keep adding obstructions until you have the realistic 3d model of the room, with the sprinklers spaced accordingly, and you have an up-to-code sprinkler system.
There is one example where sprinklers actually need to be spaced really close to, rather than away from, an object.. and that is the ceiling (sprinklers must be within 12 in of ceiling typically).
If the HVAC guy decides to reroute his ducts right through my sprinklers, then I could draw 3D HVAC ducts (I usually get 2D drawings coming in) going right through the room and the sprinklers would relocate and auto-space away from the ducts, without actually having to tell the HVAC guy he is colliding with me because all that will do is require me to do a redesign anyway.
And presto, the HVAC guy loves me because I didn't complain to him at all and seemingly did all this work by moving around him when all I really did was use the computer to do it, the job gets done much faster and I don't have to worry that I'm going to lose my job in court because I made a silly human error when I was patching my system manually because some HVAC guy made me redesign 12 times in different places.
From what I have been reading from you guys, doing this is possible although (I realize) ambitious. The end result would be vastly increased productivity, less error making, cheaper design cost, etc. Using programs like Rhino, architects are getting more and more funny-shaped buildings and making it difficult for guys like me to make sprinkler systems within the rules, and I see it as an inevitability that computers will be making almost all of the typical design decisions in the future when it comes to life safety systems, I'm just trying to see if it's possible to start implementing this extra aid today.
…
h, and using the BScale and BDistance are creating havoc somehow too. I've simplified first, and used the Kangaroo Frames component along with setting internal iterations, to make MeshMachine act like a normal component, along with releasing the FixC and FixV. The FixV didn't make any sense anyway. I've also set Pull to 0 to speed it up during testing, since much less calculation is involved to just let the meshes collapse, prevented from disappearing altogether by using a mere 15 iterations.
Also, your breps are open so that allows much more chaos and then collapse, though they did manage to close themselves too at times. Here is closed breps with a full 45 iterations:
So now that it's working, lets re-Fix the curves, and the problem arises that there is an extra seam line that is getting fixed too, running along the cylinder, stopping the mesh from pulling tight under tension wherever a vertex happens to be near that line:
So lets grab only the naked edge curves instead:
And what happens if we lose the end caps, now that we don't have an extra line skewing the result?:
There is no real curvature differences since it's not a curvy brep so the Adapt at full 1 setting has little to do. Now what does the BScale and BDist do? Nothing! Why? Your scale is out of whack, 99 mm high cylinders but only a falloff maximum of about 5, so let's make the falloff be 25 instead, but I must restore the end caps or the meshes collapse away for some reason and freezes Rhino for a minute or so the first time I try it:
It's a start.
If I intersect the cylinders, nothing changes, since they are being treated as separate runs. MeshMachine outputs a sequence of two outputs though, due to Frames being set to a bare minimum of 2 needed to get it to work, so I filter out the original run, which is just the unmodified initial mesh it creates.
The lesson so far is that closed meshes are much less prone to collapse and glitches leading to screw ups.
A Boolean union of the cylinders is when it gets funner, here show with and without the fixed curves that seem to define boundaries too where really there are just polysurface edges:
…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…