, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…
e a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative.
I get that. That’s why that 3D shape I’m trying to apply the voronoi to was done in NX. I do wonder where the GUI metaphor GH uses comes from. It reminds me of LabVIEW.
"What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."
Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it.
It’s not the primary components that catalyzed this thought but rather the secondary components. I was toying with a component today (twist from jackalope) that made use of three toggle components. The things they controlled are checkboxes in other apps.
Take a look at this jpg. Ignore differences; I did 'em quickly. GH required 19 components to do what SW did with 4 commands. Note the difference in screen real estate.
As an aside, I really hate SolidWorks (SW). But going forward, I’ll use it as an example because it’s what most people are familiar with.
"[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."
Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.
I agree, and disagree. I believe parametric applies equally to GH AND SW, NX, and so forth, while algorithmic is unique to GH (and GC and Dynamo I think). Thus I understand why you prefer the term. I too tend to not like referring to GH as a parametric modeler for the same reason.
But I think it oversimplifies it to say parametric modelers move the clicks. SW tracks clicks the same way GH does; GH holds that information in geometry components while SW holds it in a feature in the feature tree. In both GH and SW edits to the base geometry will drive a recalculation, but more commonly, it’s an edit to input data, beit equations or just plain numbers, that drive a recalculation.
I understand the difference in these programs. What brought me to GH is that it can create a visual dialog that standard modelers can’t. But as I've grown more comfortable with it I’ve come to realize that the GUI of GH and the GUI of other parametric modelers, while looking completely different, are surprisingly interchangeable. Do not misconstrue that I’m suggesting that GH should replace it’s GUI with SW’s. I’m not. I refrain from suggesting anything specific. I only suggest that you allow yourself to think radically.
This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Given a choice, I'd pick kick-ass algorithmic modeller with no parametrics tacked on.
2. Visual Programming.
I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
I'll admit, this is a bit tough to explain. As I've re-read my own comment, I think it was partly a precursor to the context sensitivity point and touched upon other stated points.
This now touches upon my own ignorance about GH’s target market. Are you moving toward a highly specialized tool for programmers and/or mathematicians, or is the intent to create a tool that most designers can master? If it’s the former, rock on. You’re doing great. If it’s the latter, I’m one of the more technically sophisticated designers I know and I’m lost most of the time when using GH.
GH allows the same freedom as a command line editor. You can do whatever you like, and it’ll work or not. And you won’t know why it works or doesn't until you start becoming a bit of an expert and can actually decipher the gibberish in a panel component. I often feel GH has the ease of use of DOS with a badass video card in front.
Please indulge my bit of storytelling. Early 3D modelers, CATIA, Unigraphics, and Pro-Engineer, were unbelievably difficult to use. Yet no one ever complained. The pain of entry was immense. But once you made it past the pain threshold, the salary you could command was very well worth it. And the fewer the people who knew how to use it, the more money you could demand. So in a sense, their lack of usability was a desirable feature among those who’d figured it out.
Then SolidWorks came along. It could only do a fraction of what the others did, but it was a fraction of the cost, it did most of what you needed, and anyone could figure it out. There was even a manual on how to use it. (Craziness!) Within a few short years, the big three all had to change their names (V5, NX, and Wildfire (now Creo)) and change the way they do things. All are now significantly easier to use.
I can tell that the amount of development time that’s gone into GH is immense and I believe the functionality is genius. I also believe it’s ease of use could be greatly improved.
Having re-read my original comments, I think it sounded a bit snotty. For that I apologize.
3. Context sensitivity.
"There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."
Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?
I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal [...] is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.
You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
You bring up both interesting points and limits to my understanding of coding. I’ve reached the point in my learning of GH where I’m just getting into figuring out the sets tab (and so far I’m not doing too well). I often find myself wondering “Is all of this manual conditioning of the data really necessary? Doesn’t most software perform this kind of stuff invisibly?” I’d love to be right and see it go away, but I could easily be wrong. I’ve been wrong before.
5. Components.
"Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."
I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data.
I kinda like this. It’s a continuation of what you’re currently doing with things like the panel component.
"Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"
It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
6. Integration.
"Why isn't it just live geometry?"
This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry.
"Maybe add more Rhino functionality to GH. GH has no 3D offset."
That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).
On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
You work for McNeel yet you seem to speak of them as a separate entity. Is this to say that there are technical reasons GH can only access things through the Rhino SDK? I’d think you would have complete access to all Rhino API’s. I hope it’s not a fiefdom issue, but it happens.
7. Documentation.
Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.
Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
It begs the question that I have to ask. When is GH1.0 scheduled to launch? And if you need another person to proofread the current draft of new primer.
patrick@girgen.com
I can’t believe wikipedia has an entry for feature creep. And I can’t believe you included it. It made me giggle. Thanks.
8. 2D-ness.
"I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"
I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
I believe it’s been helpful for me to have figured this out. I recently completed a GH course at a local Community College and have done a bunch of online tutorials. The first real project I decided to tackle has turned out to be one of the more difficult things to try. It’s the source of the questions I posted. (Thanks for pointing out that they were posted in the wrong spot. I re-posted to the discussions board.)
I just can't seem to figure out how to turn the voronoi into legitimate geometry. I've seen this exact question posted a few times, but it’s never been successfully answered. What I'm showing here is far more angular than I’m hoping for. The mesh is too fine for weaverbird to have much of an effect. And I haven't cracked re-meshing. Btw, in product design, meshes are to be avoided like the plague. Embracing them remains difficult.
As for offsetsurf, in Rhino, if you do an offsetsurf to a solid body, it executes it on all sides creating another neatly trimmed body thats either larger or smaller than the original. This is how every other app I know of works. GH’s offsetsurf creates a bunch of unjoined faces spaced away from the original brep. A common technique for 3D voronois (Yes, I hit the voronoi overuse easter egg) is to find the center of each cell and scale them by this center. If you think about it, this creates a different distance from the face of the scaled cell to the face of the original cell for every face. As I've mentioned, this project is giving me serious headaches.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
Thank you for taking the time to reply David. Often we feel that posting such things is send it into the empty ether. I’m very glad that this was not the case.
And thank you for all of the work you've put into GH. If you found any of my input overly harsh or ill-mannered, I apologise. It was not my intent. I'm generally not the ranting sort. If I hadn't intended to provide possibly useful input, I wouldn't have written.
Cheers
Patrick Girgen
Ps. Any pointers on how to get a bit further on the above project would be greatly appreciated.
…
But not just any gum tree. The angophora, no less:
Why? Because I like nature, that's why. Every time I see new designs –especially architectural designs– it worries me that the natural environment is being taken over. Not just that, but even the new materials used in all product designs has to come from nature as well [read: mines].
So. People are forgetting that we still need trees and I believe that if someone sees a beautiful [read: established] tree in their architectural plans, they are going to be much more likely to build around it and not cut it down. That alone would no doubt increase the value of the house.
My thinking is that current tree models suck. They look unnatural and I think I know why. They're not random or organic enough. They're not detailed enough. That's basically my 'rationale' for this project. Just look at how different all of these tree trunks are!
So I am not being paid for this project. It's a personal project of mine. I'm just worried about the trunk shape for now — I'll worry about all the leaves... when I get to that.
I am a grasshopper beginner. Please keep that in mind. I am also fairly hopeless at traditional programming, but I find the visual approach of grasshopper much easier to grasp. So unfortunately I have gotten stuck and need some help, even just a clue, as to how to proceed.
That said, here is my current progress:
About a year ago, I started modelling with straight trunks using pipe sections, to see if I could get a very basic "tree" shape. And to see if I could join the segments together. Yes it works but it looks hopeless as you can imagine. Then I stopped for a long while. Now I'm back at it, hoping to improve a lot more.
I have already made one basic vertical nurbs curve with tangents at either end as the main "trunk".
I tried creating two ellipses at each end of the main trunk/curve and lofting between them but it omitted the main curve/rail. So it ended up being an elliptical trunk with straight sides which of course still didn't look right.
Then I divided the first main curve up into a number of segments. I think that is a better approach.
I have taken the parameters of the curve at each segment (probably the tangent, but I am unsure what the exact parameter is) and used that to form a basic angled plane at each segment/division.
I have been able to draw ellipses at each segment and rotate them onto the plane.
I was going to loft it together later on. A Curved loft with elliptical cross-sections looks much better than straight a pipe does, but still looks too unnatural.
I quickly realised that tree trunks are not elliptical, but rather, shaped more like 'kidneys'.
The next step was to create >3 points on each of those planes (spaced fairly evenly around the ellipse so as not to create a really funky/unwanted shape).
Maybe it would be better to model with a triangle or other polygon instead of an ellipse. I haven't got that far yet... because here is where I am getting stuck.
I managed to find a way of getting three roughly 'triangular' points along each that ellipse.
I also managed to create three nurbs cuves in the Z direction which intersected those three points, a bit like three seams down the side of the tree trunk, but couldn't figure out how to loft it all together.
I think it was the wrong approach anyway... I'd rather try to create a bunch of nurbs curves at each of the XY planes so as to get more control of the shape.
What I am trying to do now is create three roughly triangular-spaced points on a basic ellipse through which I can then draw a simple nurbs curve (think like a cross section of the trunk).
I would then like to add some XY-only randomness to the positions of those points. Not Z randomness, otherwise the trunk is going to get messed/kinked up. That's probably very important.
Then I would like to loft those nurbs curvs at each XY plane together forming the basic tree trunk, which also tapers based on some other variable (a non-linear factor, not simply distance from ground plane, perhaps something else?).
I have attached the GH file.
I am also open to suggestions if you have a better way of solving a problem. I would like to retain control over a lot of factor such as number of branches, spacing, average branch length, etc. My main contrsaints are that the entire thing has to be somewhat random and non-linear.
…
3. receiver gets data from sender via input (0) < the data here may be changed in the meantime, for instance if its a double then I would like to add 1 to it.
4. receiver sends data to sender's input(2)
5. go to 1.
VS 2013 studio project folder
SENDER
Public Class loopStart Inherits GH_Component
Dim cnt As Integer
Friend Property counter() As Integer Get Return cnt End Get Set(value As Integer) cnt = value End Set End Property
Dim iData As New GH_Structure(Of IGH_Goo)
Friend Property startData() As GH_Structure(Of IGH_Goo) Get Return iData End Get Set(value As GH_Structure(Of IGH_Goo)) iData = value End Set End Property
Public Sub New() MyBase.New("loopStart", "loopStart", "Start the loop with this one.", "Extra", "Extra") End Sub
Public Overrides ReadOnly Property ComponentGuid() As System.Guid Get Return New Guid("bdf1b60d-6757-422b-9d2d-08257996a88c") End Get End Property
Protected Overrides Sub RegisterInputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager) pManager.AddGenericParameter("Data", "dIn", "Data to loop", GH_ParamAccess.tree) pManager.AddIntegerParameter("Steps", "S", "Number of loops", GH_ParamAccess.item) pManager.AddGenericParameter("<X>", "<X>", "Please leave this one alone, don't input anything.", GH_ParamAccess.tree) pManager.Param(2).Optional = True End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager) pManager.AddGenericParameter("Data", "dOut", "Data to loop", GH_ParamAccess.tree) End Sub
Public Overrides Sub CreateAttributes() m_attributes = New loopStartAttributes(Me) End Sub
Protected Overrides Sub SolveInstance(ByVal DA As Grasshopper.Kernel.IGH_DataAccess)
Dim numLoop As Integer DA.GetData(1, numLoop)
Dim loopDt As New Grasshopper.Kernel.Data.GH_Structure(Of IGH_Goo)
If cnt = 0 Then Me.startData.Clear() DA.GetDataTree(0, Me.startData) loopDt = startData.Duplicate DA.SetDataTree(0, loopDt) End If
If cnt < numLoop - 1 And cnt > 0 Then DA.GetDataTree(2, loopDt) DA.SetDataTree(0, loopDt) Me.ExpireSolution(True) Else DA.GetDataTree(2, loopDt) DA.SetDataTree(0, loopDt) End If
cnt += 1
End Sub
End Class
RECEIVER
Public Class loopEnd Inherits GH_Component
Dim aData As New GH_Structure(Of IGH_Goo)
Friend Property anyData() As GH_Structure(Of IGH_Goo) Get Return aData End Get Set(value As GH_Structure(Of IGH_Goo)) aData = value End Set End Property
Public Sub New() MyBase.New("loopEnd", "loopEnd", "End the loop with this one.", "Extra", "Extra") End Sub
Public Overrides ReadOnly Property ComponentGuid() As System.Guid Get Return New Guid("3ffa3b66-8160-4ab3-87c9-356b2c17aadd") End Get End Property
Protected Overrides Sub RegisterInputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager) pManager.AddGenericParameter("Data", "dIn", "Data to loop", GH_ParamAccess.tree) End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager) pManager.AddGenericParameter("Data", "dOut", "Data after the loop", GH_ParamAccess.tree) End Sub
Protected Overrides Sub SolveInstance(ByVal DA As Grasshopper.Kernel.IGH_DataAccess) Me.aData.Clear() DA.GetDataTree(0, Me.aData) runner()
DA.SetDataTree(0, Me.aData) End Sub
Sub runner()
Dim doc As GH_document = Grasshopper.Instances.ActiveCanvas.Document Dim docl As list(Of iGH_DocumentObject) = (doc.Objects)
For i As Integer = 0 To docl.count - 1 Step 1 Dim comp As Object = docl(i) If comp.NickName = "loopStart" Then Dim compp As IGH_Param = comp.Params.input(2) compp.VolatileData.Clear() compp.AddVolatileDataTree(anyData) Exit For End If Next End Sub
End Class
…
option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock"). Then paste them in File->Special Folders->User Object Folder. You can download the example files from here. They act in similar way, Ladybug Photovoltaics components do: we pick a surface, and get an answer to a question: "How much thermal energy, for a certain number of persons can my roof, building facade... generate if I would populate them with Solar Water Heating collectors"? This information can then be used to cover domestic hot water, space heating or space cooling loads:
Components enable setting specific details of the system, or using simplified ones. They cover analysis of domestic hot water load, final performance of the SWH system, its embodied energy, energy value, consumption, emissions... And finding optimal system and storage size. By Dr. Chengchu Yan and Djordje Spasic, with invaluable support of Dr. Willian Beckman, Dr. Jason M. Keith, Jeff Maguire, Nicolas DiOrio, Niraj Palsule, Sargon George Ishaya and Craig Christensen. Hope you will enjoy using the components! References: 1) Calculation of delivered energy: Solar Engineering of Thermal Processes, John Wiley and Sons, J. Duffie, W. Beckman, 4th ed., 2013. Technical Manual for the SAM Solar Water Heating Model, NREL, N. DiOrio, C. Christensen, J. Burch, A. Dobos, 2014. A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015
2) Domestic hot water load: Modeling patterns of hot water use in households, Ernest Orlando Lawrence Berkeley National Laboratory; Lutz, Liu, McMahon, Dunham, Shown, McGrue; Nov 1996. ASHRAE 2003 Applications Handbook (SI), Chapter 49, Service water heating
3) Mains water temperature Residential alternative calculation method reference manual, California energy commission, June 2013. Development of an Energy Savings Benchmark for All Residential End-Uses, NREL, August 2004. Solar water heating project analysis chapter, Minister of Natural Resources Canada, 2004.
4) Pipe diameters and pump power: Planning & Installing Solar Thermal Systems, Earthscan, 2nd edition
5) Sun postion and POA irradiance, the same as for Ladybug Photovoltaics (Michalsky (1988), diffuse irradiance by Perez (1990), ground reflected irradiance by Liu, Jordan (1963))
6) Optimal system and storage tank size: A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015.…
then passed to the file3dm.Write() Method when it's used? Turns out it will work in the Visual Studio IDE perfectly well like this, Now I'm just sorting out the best way to create a surface.
If I can ask one more question, what does file.Polish() do?
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using Rhino.Geometry;
using Rhino.FileIO;
using Rhino.Collections;
using Rhino;
namespace NurbsExample
{
class Program
{
static void Main(string[] args)
{
string output = "C:/WorkingFileExample.3dm";
RunScript(output);
}
private static void RunScript(string path)
{
File3dm file = new File3dm();
file.Polish();
for (int j = 0; j<=10; j++)
{
file.Objects.AddLine(new Line(j, 0, 5 - j, 5 + j, 0, j));
}
File3dmWriteOptions options = new File3dmWriteOptions();
options.SaveAnalysisMeshes = false;
options.SaveRenderMeshes = false;
options.SaveUserData = true;
file.Write(path, options);
}
}
}…
Added by Henry Jarvis at 6:33am on October 7, 2015
peuvent se diviser une surface avec ne importe quel motif imaginable. 3. Ici, je fournir un moyen de le faire via Lunchbox ... cela fonctionne mais il est fixe et donc nous avons besoin de jouer avec des arbres de données afin de créer le motif approprié par cas. 4. L'autre composante est un joint C # qui fait beaucoup de choses autres que de diviser ne importe quelle collection de points avec de nombreux modèles (voir le modèle ANDRE que je ai fait pour vous). 5. Vous devez décomposer une polysurface en morceaux afin de travailler sur les subdivisions. 6. Je donne une autre définition ainsi que pourrait agir comme un tutoriel sur la façon de traiter des ensembles de points via des composants de GH standards et des méthodes classiques.
Avertissez si tous ceux-ci apparaissent floue pour vous: Si oui, je pourrais écrire une définition utilisant des composants de GH classiques - mais vous perdrez les variations de motifs de division.
mieux, Peter
…