geode. The faceting system also references the original use of triangulation for mapping three dimensional landscapes.
My question responds to the need to control the edges lengths and angles within the triangles to make the process of construction possible. We are hoping to keep the edges under 28 inches and the minimum angle more than 15 degrees. What would be your suggestion in grasshopper?
Our process for getting the facet was also... the long way.
1. draw curves based on three dimension measurements of interior
2. networks surface the four curves
3. mesh surface
4. triangulate mesh
5. reduce polygons
6. splitmeshedge where necessary to make quadrilaterals triangles once more
Any suggestions?…
Added by Amanda Gann at 8:57pm on December 4, 2013
of the new challenges presented to the society and architecture in Portugal. With technological developments, tools once limited to not creative areas begin to be part of the everyday life of students in University Architecture Laboratories and change its design processes. The architecture design methods are changing rapidly with the introduction of CAD-CAM software’s. In recent years, new software’s have been available for 3D representation and digital fabrication, which have allowed creating new ways of interacting with the computer and architecture. Contemporary architecture in its various scales, seeks greater flexibility, adaptability and interactivity taking into account both the means and goals of kinetic systems. Thus, it is essential to the creative industry players to acquire new knowledge about the latest technological innovations and how they can solve some of the problems and challenges of today’s society.
The workshop will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in all the design process, to simulation and prototype 3D interactive architecture solutions.
The theoretical and practical workshop (64 hours) taught in English and Portuguese, will be composed of two modules: (1) LS_01: Firefly +Grasshopper + Arduino and Scale Model Fabrication; (2) LS_02: Design Studio – Discursive Wall.
This workshop is intended for students and professionals from different areas of knowledge, (architecture, design, fine arts, engineering, music and programming) who are interested in the process of design: from ideation to prototyping. The participants will generate scale models.
Registration is limited to 20 participants with or without software knowledge. Participants will work individually and in group. Participants must take their own laptops to the workshop. Registrants should complete the form by 28 February 2012. Once registered, you will receive an email confirming your acceptance.
Questions or doubts contact us:
alivingsystem@gmail.com
…
Added by Brimet Silva at 7:07pm on January 16, 2012
ll-Facade using Rhino and Grasshopper Participants will learn; Rhinoceros Grasshopper Advanced Parametric Design Brick Formations and Explorations Shadow-Design Relationship
Session 2: Advanced Digital Modeling for Additive Manufacturing (3D Printing) Participants will learn; How to prepare a 3D design to 3D Printing process in Rhinoceros Advanced Methods for 3D Print optimisation for time and cost effective production 3D Printing software education Cura
INFO
Date Saturday, 28 September 2019 Schedule 9:30am – 2:30pm (Session 1) | 2:45pm – 7:00pm (Session2) Venue (TBC) Pada Labs, Istanbul Language English/Turkish Softwares Rhinoceros Grasshopper 3D Cura Participants will need to bring their own laptops with software installed; other plugins will be distributed at the workshop. Prerequisites All tutorials are open to beginner level. No previous knowledge of Cura and Grasshopper needed. Basic knowledge of Rhinoceros recommended. Participation The workshop is limited to the first 20 applicants. Each student will receive a certificate of participation. Prices for each session: (You can pick one and attend one) Special Early registration (Deadline 1 August ) Students 310 TL Professionals 400 TL Regular registration Students 390 TL Professionals 480 TL Prices for Session 1&2 Combined: (Full Day) Special Early registration (Deadline 1 August ) Students 540 TL Professionals 690 TL Regular registration Students 620 TL Professionals 790 TL DISCOUNTS Group registration of 3 or more people will get a 15% discount. * Previous Pada workshop students will get a 10% discount. DIRECTOR Begum Aydinoglu, M.Arch AA DRL will be instructing and directing the following workshops. REGISTRATION: Email to pada.workshops@gmail.com for registration instructions. Please note that we have limited seats and there won't be any exceptions. …
, presso la sede Manens-Tifs, nei giorni 26,27 e 28 maggio 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 12 maggio 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Pellinindustrie.…
lysing and assessing sustainable performance of buildings and structures, called sustainability-open. Yes, open-source: that means everybody can use it as much as they want. We hope that this will give designers and engineers to make more sustainable buildings and structures in the future. And you can take a look at our code - to learn or improve it if you like! The framework is still in early stage and doesn't do a lot yet at the moment, so this is your chance to become an early-adopter.(By the way, very soon new components will come out that will early let you do more.)
The framework is linked to Grasshopper and Rhino - as soon as we have a little bit more, we will add some links on this site too.
At the Design Modelling Symposium Berlin (September 28 - October 3)we will host a workshop over the weekend which will show you everything about the framework and its components, our future plans, etc. We will also teach you how to develop your own components. Not everything will be purely related to the framework as we will be doing a lot of .net development related to Rhino/Grasshopper and other parametric applications. If you would like to know more about the framework, take a look at: http://www.sustainability-open.com or follow us on Twitter: @sustainableopenIf you would like to sign up for the workshop in Berlin or would like to know more, go here:https://www.design-modelling-symposium.de/frontend/index.php?folder...Regards,Jeroen…
lysing and assessing sustainable performance of buildings and structures, called sustainability-open. Yes, open-source: that means everybody can use it as much as they want. We hope that this will give designers and engineers to make more sustainable buildings and structures in the future. And you can take a look at our code - to learn or improve it if you like! The framework is still in early stage and doesn't do a lot yet at the moment, so this is your chance to become an early-adopter.(By the way, very soon new components will come out that will early let you do more.)
The framework is linked to Grasshopper and Rhino - as soon as we have a little bit more, we will add some links on this site too.
At the Design Modelling Symposium Berlin (September 28 - October 3)we will host a workshop over the weekend which will show you everything about the framework and its components, our future plans, etc. We will also teach you how to develop your own components. Not everything will be purely related to the framework as we will be doing a lot of .net development related to Rhino/Grasshopper and other parametric applications. If you would like to know more about the framework, take a look at: http://www.sustainability-open.com or follow us on Twitter: @sustainableopenIf you would like to sign up for the workshop in Berlin or would like to know more, go here:https://www.design-modelling-symposium.de/frontend/index.php?folder_id=180Regards,Jeroen…
.0004. [1 of 7] Writing simulation parameters...5. [2 of 6] No context surfaces...6. [3 of 6] Writing geometry...7. [4 of 6] Writing materials and constructions...8. [5 of 7] Writing schedules...9. [6 of 7] Writing loads and ideal air system...10. [7 of 7] Writing outputs...11. ...... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf12. 13. Analysis is running!...14. c:\ladybug\unnamed\EnergyPlus\eplusout.csv15. ......
Done! Read below for errors and warnings:
16. 17. Program Version,EnergyPlus, Version 8.2.7-777c1f8d79, YMD=2015.02.28 16:09,IDD_Version 8.2.718. 19. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.20. 21. ** Warning ** Version: in IDF="'8.2.7'" not the same as expected="8.2"22. 23. ** Warning ** ManageSizing: For a zone sizing run, there must be at least 1 Sizing:Zone input object. SimulationControl Zone Sizing option ignored.24. 25. ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.26. 27. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_1228. 29. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_12_GLZ_1230. 31. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2532. 33. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_25_GLZ_2534. 35. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2836. 37. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_28_GLZ_2838. 39. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_940. 41. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_9_GLZ_942. 43. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1044. 45. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_10_GLZ_1046. 47. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1148. 49. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_11_GLZ_1150. 51. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1552. 53. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_15_GLZ_1554. 55. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2456. 57. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_24_GLZ_2458. 59. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2560. 61. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_25_GLZ_2562. 63. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3064. 65. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_30_GLZ_3066. 67. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3268. 69. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_32_GLZ_3270. 71. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3472. 73. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_34_GLZ_3474. 75. ** Warning ** GetSurfaceData: Very small surface area[2.94495E-004], Surface=F73533B3C6894C67936B_GLZP_076. 77. ** Warning ** GetSurfaceData: Very small surface area[3.84753E-004], Surface=F73533B3C6894C67936B_GLZP_178. 79. ** Warning ** GetSurfaceData: Very small surface area[9.16905E-004], Surface=F73533B3C6894C67936B_GLZP_380. 81. ** Warning ** GetSurfaceData: Very small surface area[4.96186E-004], Surface=F73533B3C6894C67936B_GLZP_482. 83. ** Warning ** GetSurfaceData: Very small surface area[2.37373E-005], Surface=F73533B3C6894C67936B_GLZP_684. 85. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_786. 87. ** Warning ** GetSurfaceData: Very small surface area[5.86549E-004], Surface=F73533B3C6894C67936B_GLZP_888. 89. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_1090. 91. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.09566E-004], Surface=F73533B3C6894C67936B_GLZP_1292. 93. ** Warning ** GetSurfaceData: Very small surface area[1.51701E-004], Surface=F73533B3C6894C67936B_GLZP_1394. 95. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_1596. 97. ** Warning ** GetSurfaceData: Very small surface area[2.94451E-004], Surface=F73533B3C6894C67936B_GLZP_1698. 99. ** Warning ** GetSurfaceData: Very small surface area[8.03294E-004], Surface=F73533B3C6894C67936B_GLZP_17100. 101. ** Warning ** GetSurfaceData: Very small surface area[6.83026E-004], Surface=F73533B3C6894C67936B_GLZP_18102. 103. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_20104. 105. ** Warning ** GetSurfaceData: Very small surface area[3.19851E-005], Surface=F73533B3C6894C67936B_GLZP_21106. 107. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_23108. 109. ** Severe ** GetSurfaceData: Zero or negative surface area[-4.05899E-004], Surface=F73533B3C6894C67936B_GLZP_25110. 111. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_27112. 113. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.91146E-004], Surface=F73533B3C6894C67936B_GLZP_28114. 115. ** Warning ** GetSurfaceData: Very small surface area[2.70158E-004], Surface=F73533B3C6894C67936B_GLZP_29116. 117. ** Warning ** GetSurfaceData: Very small surface area[3.22781E-004], Surface=F73533B3C6894C67936B_GLZP_30118. 119. ** Warning ** GetSurfaceData: Very small surface area[4.67821E-004], Surface=F73533B3C6894C67936B_GLZP_33120. 121. ** Warning ** GetSurfaceData: Very small surface area[3.22737E-004], Surface=F73533B3C6894C67936B_GLZP_34122. 123. ** Warning ** GetSurfaceData: Very small surface area[2.65634E-004], Surface=4BDFD67E6D0E486796CC_GLZP_0124. 125. ** Warning ** GetSurfaceData: Very small surface area[4.70736E-004], Surface=4BDFD67E6D0E486796CC_GLZP_1126. 127. ** Warning ** GetSurfaceData: Very small surface area[3.42507E-004], Surface=4BDFD67E6D0E486796CC_GLZP_3128. 129. ** Warning ** GetSurfaceData: Very small surface area[5.89276E-004], Surface=4BDFD67E6D0E486796CC_GLZP_4130. 131. ** Warning ** GetSurfaceData: Very small surface area[1.91146E-004], Surface=4BDFD67E6D0E486796CC_GLZP_6132. 133. ** Warning ** GetSurfaceData: Very small surface area[9.71205E-004], Surface=4BDFD67E6D0E486796CC_GLZP_7134. 135. ** Warning ** GetSurfaceData: Very small surface area[4.34494E-004], Surface=4BDFD67E6D0E486796CC_GLZP_8136. 137. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.60159E-004], Surface=4BDFD67E6D0E486796CC_GLZP_9138. 139. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.11946E-004], Surface=4BDFD67E6D0E486796CC_GLZP_10140. 141. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.41257E-004], Surface=4BDFD67E6D0E486796CC_GLZP_11142. 143. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.21483E-005], Surface=4BDFD67E6D0E486796CC_GLZP_15144. 145. ** Warning ** GetSurfaceData: Very small surface area[2.65716E-004], Surface=4BDFD67E6D0E486796CC_GLZP_16146. 147. ** Warning ** GetSurfaceData: Very small surface area[4.84044E-004], Surface=4BDFD67E6D0E486796CC_GLZP_17148. 149. ** Warning ** GetSurfaceData: Very small surface area[7.12297E-004], Surface=4BDFD67E6D0E486796CC_GLZP_19150. 151. ** Warning ** GetSurfaceData: Very small surface area[6.14324E-004], Surface=4BDFD67E6D0E486796CC_GLZP_22152. 153. ** Warning ** GetSurfaceData: Very small surface area[8.88887E-004], Surface=4BDFD67E6D0E486796CC_GLZP_23154. 155. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.89060E-004], Surface=4BDFD67E6D0E486796CC_GLZP_24156. 157. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.14849E-003], Surface=4BDFD67E6D0E486796CC_GLZP_25158. 159. ** Warning ** GetSurfaceData: Very small surface area[4.00479E-004], Surface=4BDFD67E6D0E486796CC_GLZP_27160. 161. ** Warning ** GetSurfaceData: Very small surface area[6.63061E-005], Surface=4BDFD67E6D0E486796CC_GLZP_28162. 163. ** Warning ** GetSurfaceData: Very small surface area[1.09018E-004], Surface=4BDFD67E6D0E486796CC_GLZP_29164. 165. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.49326E-005], Surface=4BDFD67E6D0E486796CC_GLZP_30166. 167. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.17446E-004], Surface=4BDFD67E6D0E486796CC_GLZP_32168. 169. ** Warning ** GetSurfaceData: Very small surface area[8.60686E-004], Surface=4BDFD67E6D0E486796CC_GLZP_33170. 171. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34172. 173. ** Fatal ** GetSurfaceData: Errors discovered, program terminates.174. 175. ...Summary of Errors that led to program termination:176. 177. ..... Reference severe error count=24178. 179. ..... Last severe error=GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34180. 181. ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).182. 183. ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.184. 185. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.186. 187. ************* EnergyPlus Sizing Error Summary. During Sizing: 2 Warning; 0 Severe Errors.188. 189. ************* EnergyPlus Terminated--Fatal Error Detected. 41 Warning; 24 Severe Errors; Elapsed Time=00hr 00min 1.51sec190.…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……