user to understand. RhinoScript is a generally more straightforward and easy to use. You can think of it as a translation of RhinoCommon so that you don't have to write all the technical stuff.
In your first line you've said "import rhinoscriptsyntax as rs". To see the methods you can call from this library you can go to the help menu and choose 'Help for Rhinoscript'. It will show you a searchable window of all the the options you have. This is much easier for new users to learn than looking at the RhinoCommon SDK.
If you search the help file for 'BoundingBox' you'll get the screen capture below:
At the bottom you can see an example of how to use it. In your case you would replace the following lines:
2/ boxA=brepA.GetBoundingBox((0,0,0,)) --> boxA = rs.BoundingBox(brepA)
3/ boxB=brepB.GetBoundingBox((0,0,0,)) --> boxB = rs.BoundingBox(brepB)
The script you have written uses elements of both RhinoScript and RhinoCommonSDK. I would suggest you might start just using RhinoScript. See below, I have re-written the first 8 lines of your script using just RhinoScript:
import rhinoscriptsyntax as rs
#Get BoundingBox from breps.BoundingBoxA = rs.BoundingBox(brepA) #Returns list of eight corner points.BoundingBoxB = rs.BoundingBox(brepB)
#Get centre point of RhinoScript BoundingBox (which is a list of eight points).boxA = rs.AddBox(BoundingBoxA) #Generate box from corner pointsptA = rs.SurfaceVolumeCentroid(boxA) #Get Volumetric Centroid of boxboxB = rs.AddBox(BoundingBoxB) ptB = rs.SurfaceVolumeCentroid(boxB)
For reference the following will achieve the same thing using RhinoCommon, fewer lines, but more technical. There are a few other quirks as well, for example you have to explictly tell the python component what kind of object 'brepA' is. See below for example of same script in RhinoCommon:
import Rhino as rh
centerPtA = brepA.GetBoundingBox(rh.Geometry.Plane.WorldXY).CentercenterPtB = brepB.GetBoundingBox(rh.Geometry.Plane.WorldXY).Center
I'm not sure what you are trying to achieve overall and your loop doesn't make a lot of sense to me but I hope that clarifies some of the differences between the two libraries you can use.
Regards,
M…
l design.
2/ Optimization
2.1/ in prefabrication
2.2/ combinatorial
2.3/ approach comparisons (i.e. deterministic vs stochastic)
2.4/ share your research
2.5/ ... etc. the list goes on and on
3/ Share you design rationale and how computation fits in
4/ Need help with this problem...
5/ Challenges and workshops announcements
6/ CD News
7/ Share computational design projects under construction or built (akin to skyscrapercity)
8/ and so many other categories and sub-categories...
Just my first thoughts. That breakdown in optimization is just an example. Maybe 'sections' is an old-school way of seeing things, I just wanted to share some thoughts on the kind of content I look forward to seeing. It can be pragmatic topics, but also theoretical, and allow folks to share their projects and research. Some categories are specific, others broad. I suppose I'm interested in community building with regards to computational design. I think SmartGeometry attempted to accomplish this at some point in the past, to some degree. However their focus appears to be in the workshops and challenges.
I recall the silly flame wars that the CG industry had 20 years ago (lame). I'd avoid that, even if it meant forbidding the mention of any specific software in certain areas or in the entire forum. Which would be tricky, but the endless flame wars and silly comparisons were such a waste of everyone's time in CG.
Without dwelling on this too much yet, I think that the software specific questions belong in software specific forums. If we already had a common language for computational design, you'd just need to add the right description as a meta-tag to any Dynamo or Grasshopper forum post, and you'd be able to find analogous solutions in either forum effortlessly, right?
The Dynamo and Grasshopper forums lack design-centric content. The emphasis is generally on the tools and workflow. Computational design is hybrid in essence, it involves both design and computer programming (be it visual or textual). We could really use a forum for knowledge exchange where the expectation is that both are discussed with equal status.
I disagree that such a forum ought to exclude professional programmers. It should include professional programmers whom have an interest in design, and also include professional designers whom have an interest in computer programming, and everyone in between, and enthusiasts, and artists whom are curious about algorithms as a creative medium, and academics, and students, and etc etc. As long as there is rich content and activity on design as well, not only the computational bit, then the crowd will be diverse and we'll all have more to learn from one another.…
you post a screenshot of what the message coming from its readMe! output looks like?2) Close your Grasshopper and Rhino.3) Download "Revo Uninstaller Pro" from here. It is free for first 30 days, which is what we need.4) Right click on the RevoUninProSetup.exe and check if the file is blocked. If it is, unblock it.5) Run the RevoUninProSetup.exe file and install "Revo Uninstaller Pro".6) Uninstall "MapWinGIS" with "Revo Uninstaller Pro". It is important that "Revo Uninstaller Pro" deletes not only files from MapWinGIS installation folder, but also all other leftovers (as registry inputs). Here is a small tutorial on how to do that. Watch it from 6:10 till the end.7) Restart your PC8) When your Windows boots up, make sure that you are logged in as Administrator!9) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".10) Turn off your Windows Firewall.11) Then turn off your custom Firewall (in case you have another one, besides standard Windows Firewall).12) Completely turn off your Antivirus.13) Download again the MapWinGIS-only-v4.9.4.2-x64.exe.exe file from here.14) Right click on the MapWinGIS-only-v4.9.4.2-x64.exe file and see if it is blocked. If it is, unblock it.15) Right click on MapWinGIS-only-v4.9.4.2-x64.exe file and choose: "Run as"... Administrator.16) One the installation preparation steps start, choose "Full installation". Wait for the MapWinGIS installation to finish.17) Right-click on "Rhino 5" icon and then choose: "Run as administrator".18) Open the the ironpython_admin.gh file again, and again post a screenshot of the message coming from its readMe! output.19) Drop the "Gismo Gismo" component to Grasshopper canvas. Post a screenshot of the message coming out from its readMe! output.
So we will need in total three screenshots of the readMe! output messages.
Thank you once again for being patient, and sorry for the large number of steps.…
Added by djordje to Gismo at 1:52am on April 9, 2017
own use and added the command line port LPT1 port dump.
I found a couple of strange things in your code:
# Changes the model units to inches, but does not scale model.rs.UnitSystem(unit_system=8, scale=False)
Why did you change the model units here? HPGL units are 40 per mm (which is also 1016 per inch) staying in mm units in your model will be fine if your step scaling in right.
And doing this seems strange for a cutting program:
allCurves = rs.ObjectsByType(4)for curve in allCurves: if (rs.CurveDegree(curve) == 2 or rs.CurveDegree(curve) == 3) and rs.IsPolyCurve(curve): rs.ExplodeCurves(curve, True)allCurves = rs.ObjectsByType(4)
Cutting usually needs a closed curve to produce a nice clean removable piece from the material. Your approach results in a bunch of line/curve segments instead of closed polycurves/polylines. As this simulation shows the 'O's and 'R' are cut as a collection of curve segments - not closed polycurves:
I just removed this step from the code.
As this simulation shows every part of the font is cut in one cut action - exactly what I needed:
I saw your RVB code on the RhinoScript site too - was way more detailed than I needed - my vinyl cutter only has one 'pen' - the cutting blade. I just needed a really basic way of getting polycurves into HPGL format and firing it out to a printer port.
Thanks for your help on this little project - I'm very stoked at the result! Let me know if I can help with your cutter project.
Cheers
DK…
this was about some boring building I wouldn't respond ... but here we are talking sardines.
Here's my take on that matter:
1. The 4 C# first create/use a nurbs, then define some random planes (and transformations) and then (a) either they place some humble stripes or ... er ... (b) sardines as instance definitions (NOTE: Load Rhino file first).
2. All important decisions are the ones in yellow groups.
3. You control what you get via this (priority on stripes or sardines? that's the 1M Q):
4. If you decide for sardines (the right thing to do) then you must ENABLE the Sardiniser(C)(tm)(US patent pending) as follows:
5. The vodkaFactor on that Sardiniser C# adds some spice in the sardine placement (it does that by altering the priority on the "composite" transformation in use: first randomly rotate then planeToPlane .... or the other thing?).
6. Only the finest Da Morgada sardines are used in this definition:
7. Spot the WARNING in the filter related with what sardine to choose > do it wrong and no hard disk on your workstation > no risk no fun > sorry Amigos, he he.
8. 1M question for you all: why placing sardines (it's real-time you know) is WAY faster than creating these humble stripes?
9. Although the sardines are placed in real time as regards your CPU ... the critical factor is your GPU (display mode: rendered).
10.Still WIP (dancing sardines in the next update).
have some sardine fun, best, Lord of SardineLand…
t ''Morph'' turns Red saying ''Cannot morph from a degenerate box'' (image 2),
that's because every curve generates a box (image 3).
After what i check the Option ''Union'' box to make only one box for all the curves (image 4).
However, the result is aleatory and not accurate at all ... :/ (see image 6).I know you are developing Pufferfish and not ''Morph'' component, but recently you publish on instagram a video where i believe you could morph and Twist with success a collection of curves (please see image 7 and 8)...If you could give me a hint how that can be achieved, it would be awesome.(Piping/Meshing the curves with very small diameter will perhaps work and help for visualisation purposes, but i actually just need morphing Raw curves for fabrication purposes).Hope to read you very soon...Ghali,…
h is attached below. it`s an arch, let`s say out of bricks with loads, represented with point loads which are taken from user-defined surfaces (to represent self-wight e.g).
goal of the study is to find a supporting arch which is inside the arch then (provided the strength of the bricks is high enough) the arch is ok -otherwise one have to change the geometry of the arch (make it thicker, or change the rise of the crown).
therefore i used kangaroo in combination with galapagos to find a catenary which fulfill the boundary conditions. it works very well. so the solution galapagos found is very satisfying.
it`s simple to prove the resulting forces in the arch if one knows the rise of the arch.
according to the formula N~ q*l^2/(8*f)
with q= 21 kn/m, l= 10.00 m and f= 0.965
one get N= 272 kn, which is very near on the solution which kangaroo founds in the middle of the arch (271 kn). due to the point loads this force have to get slightly higher the nearer one comes to the anchor points. this works perfect too.
but there is one irritating thing.
at the end of the catenary, near the anchor points, kangaroo gets two very different arch-forces. 281 kn in the next to last part. and 581 kn in the very last part. this is not possible and i am sure that the value of 581 kn is wrong. i calculated the example with a commercial fea-program too. it validates the kangaroo results except the first and the last one.
i think there is a problem with the calculated end length of the first (and last) element. they are twice too long as they have to be. or do i something wrong?
thank you for any reply and again for your work.
best peter
…
Added by pb to Kangaroo at 10:25am on October 22, 2011
as one element.
Thank you
Comment by karamba on October 7, 2014 at 11:27pm
Hello Patricio, divide the beams in such a way that each boundary vertex of the shell becomes an endpoint of a beam segment.
Best, Clemens
Comment by Llordella Patricio on October 8, 2014 at 8:30amDelete Comment
Hi Clemens,
I did what you suggested but now assemble element doesn´t work properly. Could you please tell me how to fix it? Thanks in advance, Patricio
8-10-14losa%20cadena.gh
Comment by karamba on October 8, 2014 at 11:59am
Hi Patricio, if you flatten the 'Elem'-input at the 'Assemble'-component the definition works. The triangular shell elements have linear displacement interpolations whereas the beam deflections are exact. In order to get correct results you should refine the shell mesh.
Best, Clemens
Comment by Llordella Patricio on October 9, 2014 at 8:35amDelete Comment
Hello, succeeds in creating the mesh to the slab, and built the beam segment, but when I see the deformations are not expected because the beam is deformed as the slab.
Thanks for the help
PS: maybe I'm using the program for a type of structure that is not the most appropriate, as I saw in the examples of other structures. But this type of structure is that students taught
best regards
Patricio
9-10-14%20Example%201.gh
Comment by karamba on October 9, 2014 at 10:46am
You could use the 'Mesh Edges'-component to retrieve the naked edges and turn them into beams - see attached file:91014Example1_cp.gh
Best regards,
Clemens
Comment by Llordella Patricio on October 15, 2014 at 3:41pmDelete Comment
Dear clemens
I was doing a rough estimate of the deformation, and I can not achieve the same result with Karamba. When I make a rough estimate of the result with Karamba beams and mine are very similar, I think the problem is when I connect the shell, because there are no similar results.
I sent the GH file, and an image of the calculation
The structure is concrete The result I get is 0.58cm
thank youPatricio
15-10-14%20Example.gh
Comment by karamba yesterday
Dear Patricio,
try to increase the number of shell elements. As mentioned in the manual they are linear elements. A mesh that is too coarse leads to a response which is stiffer than the real structure.
Best,
Clemens
…
s, the participants will focus on the key advantages of Grasshopper’s capabilities through a range of design challenges in order to aid designers in both their drafting tasks and modelling capabilities.
The workshop covers many concepts such as Object Attributes/Parameters, Data Types, Data Structures, and Designing with Algorithms. Specifically, this course will focus on understanding both Lists and Data Trees, as well as the best practices for integrating Grasshopper into your Professional Design Workflow. The workshop offers guided curriculum and continuous support, based on in-depth and professional learning experiences.
Workshop outcomes:Teach the participants how to:-
+ be proficient in parametric logics learning the key benefits of parametric techniques in architecture design workflow (when to use it & how to use it)+ Correctly communicate with different 3D and BIM packages in order to keep the geometry clean and light while preserving all NURBS information.+ Develop architecture design based on mathematical equations to create non-standard free form building skin.+ Create a pattern that changes dynamically based on specific inputs which can be applied over the building façade, interior walls or ceiling or even floor pattern.+ Automate and Optimize design variables to achieve the optimum solution for the design problem.
Program Outline:
DAY 1:-Introduction to Parametric Design -Introduction to Grasshopper & Rhino (technical tools).
DAY 2:-Exploring the parametric workflow. -Setup the design algorithm & generating a list of data.
DAY 3:-Introducing the new ways of generating parametric curves and surfaces.-Parametric form generation in-dept
DAY 4:-Introducing Data Tree logic and parametric transformations.-Creating Associative techniques – Attractors (points, curves and vectors).
DAY 5:-Working with advanced form generation with dynamic pattern.-Parametric optimization based on environmental analysis -featuring the Performance-Driven Design possibilities
DURATION:6 – 8 hours per day [50 - 60 hours Total]Every Saturday [9.00 Am : 1.00 Pm & 2.30 Pm : 6.00 Pm]
PREREQUISITES:No need of any specific knowledge of Rhinoceros or Grasshopper.
REGISTRATION:In order to register, you will need to fill the Registration Form .https://docs.google.com/forms/d/1PckdW1hrWs9fJAHWBZlVsuhH8K0PfDuMWIpXHT_4FYw/viewform
REGISTRATION DEADLINE:23th October 2014.…
Added by ayman wagdy at 7:48am on October 19, 2014