e2) Dim plane3 As New Plane(ap, dp, ep)
planeList.Add(plane3) Dim plane4 As New Plane(ap, ep, bp)
planeList.Add(plane4) Dim plane5 As New Plane(fp, cp, bp)
planeList.Add(plane5) Dim plane6 As New Plane(fp, dp, cp)
planeList.Add(plane6) Dim plane7 As New Plane(fp, ep, dp)
planeList.Add(plane7) Dim plane8 As New Plane(fp, bp, ep)
planeList.Add(plane8)
For i As Integer = 0 To planeList.Count - 1 Step 1
Dim transf As New transform()
transf = transform.ChangeBasis(planeList.item(0), planeList.item(i))
Dim newmesh As New mesh
newmesh = oldMesh
newmesh.Transform(transf)
meshList.Add(newmesh)
Next
================================
So why it doesnt want to work ?
I obtain 8 meshes all in the same place as mesh based on plane1
rhino4, grasshopper 0.8.0050
…
ALISTICO. Ciascun modulo si svolgerà nell’arco di due giornate e si potrà scegliere se partecipare ad entrambi i moduli o altrimenti solo all’uno o all’altro.
In questo corso si insegneranno nuove tecniche di modellazione parametrica attraverso l'utilizzo di Grasshopper, rivoluzionaria plug-in di Rhinoceros. Grasshopper permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs, abbandonando in parte l'interfaccia classica di Rhinoceros. Quest'ultimo infatti viene sostituito da un menù a tendine nel quale vengono collezionati nodi utili alla composizione di algoritmi risolutivi.
La plug-in Grasshopper, dimostra come il linguaggio del computer stia diventando un reale strumento progettuale.GRASSHOPPER-BASE - 8 oreil giorno 09/05/2013 dalle 10.00 alle 19.00
Nella prima parte del corso si insegneranno i metodi di esplicitazione degli algoritmi, applicati ad esercizi base utili alla comprensione del software. In queste ore si illustreranno, attraverso fasi operative, i seguenti argomenti:
Suddivisione degli algoritmi in parametri e componenti;
Tipologie di dati compatibili con Grasshopper e loro combinazione creando definizioni minime;
Funzioni matematiche e logiche
Data flow, liste e filtri di esclusione.
Costruzione di curve e superfici e loro trasformazione.
Scadenza preiscrizione per Grasshopper - BASE : 06/05GRASSHOPPER-SPECIALISTICO - 8 oreil giorno 10/05/2013 dalle 10.00 alle 19.00
Nella seconda parte del corso lo strumento viene specializzato affrontando editing e trasformazioni complesse sulle superfici:
Elaborazione delle superficie di suddivisione;
Tassellazione spaziale di superfici a doppia curvatura;
Gestione di parametri variabili per la progettazione di definizioni finalizzate al controllo del movimento;
Ideazione di algoritmi per il passaggio dal modello digitale al modello reale attraverso la tecnica dello sliceing.
Scadenza preiscrizione per Grasshopper - SPECIALISTICO : 07/05
Destinatari
Il corso è rivolto a tutti gli studenti universitari e professionisti che hanno una buona conoscenza delle tecniche di modellazione NURBS.
Prerequisiti
I partecipanti dovranno venire al corso muniti di proprio laptop e con software Rhinoceros perfettamente funzionanti.Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Docente del corso
Il corso sarà tenuto da un docente qualificato, esperto in disegno e rappresentazione dell' architettura e del design:
Michele Calvano| _architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART (Autorized Rhino Trainer) - [vedi CV]
…
2013 | mayo 30, 31 y 1 de junio. 15 Hrs.
Horario: 18:00 – 22.00 Jueves, Viernes y Sábado de 8:00 a 16:00 Hrs. Instructor_ Arch. David Hernández Melgarejo.
http://bioarchitecturestudio.wordpress.com
Objetivos:
El curso está dirigido a cada diseñador, ingeniero o arquitecto que quiere obtener una sólida base en modelado generativo y paramétrico dentro del flujo de trabajo en Rhinoceros.
En el curso se explorarán y construirán estructuras en el espacio paramétrico, incorporando entidades geométricas (Curvas, Superficies, Puntos, etc…) y usando patrones algorítmicos.
Cada paso será soportado con ejercicios que gradualmente incrementarán su complejidad.
El alumno aprenderá cómo trabajar con asociación geométrica y parámetros. Para perfeccionar asociación geométrica – asociación entre partes, asociación dinámica – las formas geométricas son generadas al seguir la conexión lógica entre la parte geométrica y su restricción, dimensión paramétrica y él proceso dinámico del diseño: en pocas palabras estimulamos el pensamiento relacional.
Resultados:
Los participantes con éste entrenamiento obtendrán las siguientes fundamentos.
· Construir, modificar, depurar y correr aplicaciones de Grasshopper.
· Comprender el editor gráfico algorítmico y sus patrones usando grupos y cables conectores.
· Trabajar con dimensiones dinámicas, parámetros y listas.
· Generar aplicaciones orientadas a la documentación del diseño y la fabricación.
Palabras clave:
Diseño Computacional, Scripting, Rhinoceros 5.0 + Grasshopper, Parametrización, Análisis, Fabricación Digital.
Para mayor información:
MArch. Kathrin Schröter. E-mail: kschroter@itesm.mx
Dirección de Arquitectura. Oficinas de Aulas 1, segundo piso.…
y anyway ;))
Since 2014 i begun to get back into the construction biz for some dozen main reasons, one of them being the highly increased availability of this kind of software "power", and robotics.
first project ended by 1stQ 2015 was focused on the development of a parametric block for construction. (almost sure the first parametric product designed in Uruguay, and probably one of the few first of this kind globally...)
Far from being a complicated model. In fact the standard model is extremely simple, key thing is that is fully parametric...
dimensions, materials, textures, colors... and so on
second key thing is that the main common component of the blocks (an EPS core) is robotically machined...
the blocks are the base of a construction system (oriented mainly - though not restricted only - to residential buildings) that
- is based on digital models, tendentially to be used in parametric models of buidings
- lab tested to prove to be 1.5 times as compression resistant than traditional bricks and blocks. (autoportability up to two stories buildings)
- has recently proved (due to size) to be 300% more efficient than the classic and 200% more efficient than steel frame in (our country official figures)
check it out here
--
https://drive.google.com/file/d/0B1TRxxgF_sEnQnZrTkZGbUx3cmM/view
--
- and it's aimed to be mass produced and handled by robots...
this project ended on 1H 2016
and i filed 4 patents in the process.
3 of them of mechanical devices designed as extensions for a cnc machine i own
and the fourth (
the patent related specifically with the blocks ) included a dozen of innovations (believe me...i have almost 15 yrs in the biz, and are coool stuff...)
along the project I've been working with inventor, even knowing in advance it will lack the kind of features I wanted to program many things... (lisp, VB, etc.... all same species of -prehistoric - animals) to leverage the tool to the sky - and far beyond... -
but was an alternative valid by that time because it allows the implementation of some form of parametric models, had a local representative and some supposedly skilled guys in the neibourhood....
but life is hard... and none of the latter two rendered me any significant help
so I had to take the tour myself...
- mind i never regret to do things that others cant -
and finish what i start
this one was a great project for many figures... and ended with more results than the ones commited to accomplish...
... some more history here ....
then because of a customer who brought a ZHA project ! to quote..., I crossed with rhino, and then met GH again to notice to my great joy and pleasure, in what kind of animal it had developed...
since money talks I'm investing hard on getting up to the expectations, and beyond as i usually do...
and thats how we met..
2017-2018 it's the time frame to build two robots. first one is a prototype to handle the k-nano blocks in the production process, delivery AND at the construction site ( a "smart crane" we nicknamed...)
the other one is the first prototype of robot to assist in the fabrication (smart blocker we called it to be creative ! ;))
then by 2018-2019 i'll be making a "kinda contour crafter" machine to complete the pie :) (you'll be interested on this..)
i guess you already know what all this has to do with GH...
i already have all the components i can imagine to do almost all i ever wanted to do in relation to this set of projects
but in almost a single tool !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i can design, animate, render, optimize, simulate and even robotic simulate..
so, i have to ask...
is there a chance you might be interested in helping us in some projects we are starting on march and june 2017 (8 and no more than 18 months of duration respectively) ?
sent you a friend request, for the case you might be interested to continue by e-mail...
in any case many thanks for your help and inspiration !
best regards !
long happy marriage, and large figures bank account !
…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
hours/day (40 hours) Future University in Egypt (FUE) Department of Continuing Education(DCE) ________________________________________ The aim of this workshop is to teach participants how to create a parametric housing model which can be associated with day lighting and thermal analysis. Moreover, participant will get the opportunity to develop passively design envelope. The workshop is highly interactive giving different examples that develop a strong understanding of Grasshopper Workflow & different passive strategies using the performance simulation tool (DIVA). The participants are divided into groups to study the different orientations and the final outcomes of each group are presented thus concluding the recommendation strategies for each orientation. At the end of the workshop, each participant will receive a Certificate of Attendance from Future University in Egypt. Target Participants: ‐Professional architects. ‐Master and PhD students. ‐ Last year of undergraduate students (ONLY). Prerequisite: -None, however, a basic Grasshopper & Rhinoceros knowledge is preferred. Used Software:(will be provided by the instructor). ‐Rhino 5 SR 3 ‐Grasshopper 0.90066 ‐DIVA Version 2.1.0.3 ________________________________________ Workshop Outline: 1st DAY (Wednesday 29 Jan): 1.Introduction to passive design strategies (efficient envelope) 2.Introduction to parametric design logic 2nd DAY (Thursday 30 Jan) : 1.Developing technical tools based on reverse engineering technology. 2.Examples for parametric facade design 3rd DAY (Saturday 1 Feb): 1.Enforcing the parametric logics with Grasshopper 2.Introducing the performance simulation tool (DIVA) 4th DAY (Sunday 2 Feb): 1.Facade design using grasshopper ‐Studio work. 2.Associative techniques – Day lighting and thermal simulation 5th DAY (Monday 3 Feb): 1.Final optimization and final results 2.Group work presentation ________________________________________ Participants are required to bring their own laptops. To register: 1.Fill in the application form found in this link: https://docs.google.com/forms/d/18OrcwwDks5-vd0irZITC430bjMVb8I8pdw0i5OefyMg/viewform 2.Kindly pay the workshop fees at FUE DCE Admission or in the Bank account Number of participants is a minimum of 20 and a maximum of 24 ________________________________________ Workshop Trainers: Ayman Wagdy Mohamed Ibrahim Researcher at Sustainable Design research group | AUC Lecturer at Parametric design | AUC M.Sc. Architecture – Architecture and Building Technology| Politecnico Di Milano Haitham Salah Ali Mahmoud Teaching Assistant of Design course | AASTMT Head of design team | YBA Architect Principal and cofounder | Arkan Architect ________________________________________ For any questions or info please do not hesitate to contact us at : Mob. : 01003220017 - 01008551772 Email : Fue_ppd@outlook.com…
Added by ayman wagdy at 12:12pm on January 17, 2014
hit Commit.
I'm wondering how hard it would be to have an edit box which shows the
number the user could click inside of then type in a new number, then
hit enter. :)
2) How would I go about using one line from a table and assign each
field to a variable? Then, move a slider or something and use the values
from the next row?
background: I'm recreating elbows, Tees, and other fittings using
paramatric scripts, then baking and exporting them. Here's one source
table, http://www.wardfittings.com/Assets/PDFs/0902CatalogColorOld.pdf
page 5, the uniform elbows.
Current Setup: the attached ghx file. Create a point at 0,5,0 in a blank
document with units set to inches, then assign that point to the top
left 'Center Pnt' in the ghx file.
Current workflow:
a) Modify variables A, B, H, and Nominal Dia to match one line from the
table in the linked PDF file, page 5, table of regular elbows.
b) Select the 'Nodes' and 'Surfaces' with a drag box
c) Click 'Bake'
d) Switch to Rhino window, do the 'sellast' command.
e) Drag baked objects along Y axis so the center point is at 0,0,0
f) Run 'Join'
g) Run 'Cap'
h) set the 'node' points to a layer called 'nodes'
i) set the surface to a layer called 'fit-3d'.
j) select the surfaces and nodes
k) export selected
This elbow that I'm doing only has 12 rows, so doing it the above method
doesn't take THAT long. I'm also going to be doing a couple with larger
tables like the Tee on page 8, and in other spec files. As you can
imagine, entering in EACH value into a slider is a bit tedious.
I'd love to take the pdf table, run it through an OCR program to convert
to excel, modify the headers so the ghx script knows what they are, then
paste it into grasshopper, or save it and have grasshopper read it, and
I be able to move a slider or something to to select one line at a time.
Has anyone done something similar? ie: assigned one row in a table to a
predefined set of variables, each variable coming from one field in the row?
Thanks for taking the time to read this message. :)
I'm making a rhino script to do steps d-k, so that part will be much faster.
-Suthern…
curve or locus] of a segment AB, in English. The set of all the points from which a segment, AB, is seen under a fixed given angle.
When you construct l'arc capable —by using compass— you obviously need to find the centre of this arc. This can be easily done in GH in many ways by using some trigonometry (e.g. see previous —great— solutions). Whole circles instead of arcs provide supplementary isoptics —β-isoptic and (180º-β)-isoptic—. Coherent normals let you work in any plane.
Or you could just construct β-isoptics of AB by using tangent at A (or B). I mean [Arc SED] component.
If you want the true β-isoptic —the set of all the points— you should use {+β, -β} degrees (2 sides; 2 solutions; 2 arcs), but slider in [-180, +180] degrees provides full range of signed solutions. Orthoptic is provided by ±90º. Notice that ±180º isoptic is just AB segment itself, and 0º isoptic should be the segment outside AB —(-∞, A] U [B, +∞)—. [Radians] component is avoidable.
More compact versions can be achieved by using [F3] component. You can choose among different expressions the one you like the most as long as performs counter clockwise rotation of vector AB, by 180-β degrees, around A; or equivalent. [Panel] is totally avoidable.
Solutions in XY plane —projection; z = 0—, no matter A or B, are easy too. Just be sure about the curve you want to find the intersection with —Curve; your wall— being contained in XY plane.
A few self-explanatory examples showing features.
1 & 5 1st ver. (Supplementary isoptics) (ArcCapableTrigNormals_def_Bel.png)
2 & 6 2nd ver. (SED) (ArcCapableSED_def_Bel.png)
3 & 7 3rd ver. (SED + F3) (ArcCapableSEDF3_def_Bel.png)
4 & 8 4th ver. (SED + F3, Projection) (ArcCapableSEDProjInt_def_Bel.png)
If you want to be compact, 7 could be your best choice. If you prefer orientation robustness, 5. Etcetera.
I hope these versions will help you to compact/visualize; let me know any feedback.
Calculate where 2 points [A & B] meet at a specific angle is just find the geometrical locus called arco capaz in Spanish, arc capable in French (l'isoptique d'un segment de droite) or isoptic [curve or locus]
of a segment AB, in English. The set of all the points from which a segment,
AB, is seen under a fixed given angle.…
termedio a avanzado.
2013 | mayo 22, 23, 24 y 25. 20 Hrs.
Horario: 18:00 – 22.00 Jueves, Viernes y Sábado de 8:00 a 15:00 Hrs. Instructor_ Arch. David Hernández Melgarejo.
http://bioarchitecturestudio.wordpress.com
Objetivos:
El curso está dirigido a cada diseñador, ingeniero o arquitecto que quiere obtener una sólida base en modelado generativo y paramétrico dentro del flujo de trabajo en Rhinoceros.
En el curso se explorarán y construirán estructuras en el espacio paramétrico, incorporando entidades geométricas (Curvas, Superficies, Puntos, etc…) y usando patrones algorítmicos para la generación de estructuras con metabolismos contextualizados.
Cada paso será soportado con ejercicios que gradualmente incrementarán su complejidad.
El alumno aprenderá cómo trabajar con asociación geométrica y parámetros. Para perfeccionar asociación geométrica – asociación entre partes, asociación dinámica – las formas geométricas son generadas al seguir la conexión lógica entre la parte geométrica y sus restricciones, dimensión paramétrica y él proceso dinámico del diseño: Estimulamos el pensamiento relacional para la construcción de Diseño y Arquitectura de alto desempeño.
Resultados:
Los participantes con éste entrenamiento obtendrán las siguientes fundamentos.
· Generar aplicaciones orientadas al análisis, la optimización, documentación del diseño y fabricación.
Palabras clave:
Diseño Computacional, Scripting, Rhinoceros 5.0 + Grasshopper, Parametrización, Análisis, Galapagos, Genetic Solver, Optimización, Fabricación Digital.
Para mayor información:
MArch. Kathrin Schröter. E-mail: kschroter@itesm.mx
Dirección de Arquitectura. Oficinas de Aulas 1, segundo piso.…