mp; fabrication and construction into a new era of architecture.
Register HERE
We follow three lines of thought to translate structural design in material fabrication. The first ultra lightweight, rethinking shape and material, the second dealing with same single material components, aggregated within a network, working with directionality of the elements and their connections to perform stability and for the third we will rethink definition of the brick.
Our Translations will be designed, analysed and presented in both digital and physical prototypes; from table top models, to 2m high structures.
The use of Grasshopper, Karamba and Digital Fabrication tools drive our evolutions of design. Structural design allows us to play with the type of forces in elements, orientation, force flow, geometry, restraints and connection. We use this structural behaviour to inform the search for new links between materiality, form and construction, progressing towards a unique relationship of structure, construction and fabrication.
Our Translations will be presented, through digital and physical prototyping showcasing the process of linking digital and physical inputs as a continuous feedback loop, rethinking structural design and material fabrication.
…
. From the Thermal Comfort Indices component, Comfort Index 11 (TCI-11):MRT = f(Ta, Tground, Rprim, e)
with:- Ta = DryBulbTemperature coming from ImportEPW component- Tground = f(Ta, N) where N comes from totalSkyCover input. Tground influences the long-wave radiation emitted by the ground in the MRT calculation.- Rprim defined as solar radiation absorbed by nude man = f(Kglob, hS1, ac)- ac is the clothingAlbedo in % (bodyCharacteristics input)- I can't find any definition in the code of Kglob and hS1. Could you tell me please what are those values referencered to? --> probably the globalHorizontalRadiation but how?- e = vapour pressure calculated from Ta and Relative Humidity input
Do you agree that in this case the MRT does not depend on these inputs: location, meanRadiantTemperature, dewPointTemperature and wind speed?It does not depend neither on the other bodyCharacteristics like bodyPosture, age, sex, met, activityDuration...?
MRT calculated by the TCI-11 method is the mean radiant temperature of a vector pointing vertically with a sky view factor of 100%?For ParisOrly epw,
2. From the SolarAdjustedTemperature component (that seems to be more used for the UTCI calculation examples on Hydra compared to TCI-11).
In contrast to the TCI-11, this component distinguishes diffuse and direct radiation and contextualizes the calculation thanks to _ContextShading input, right? It can also be applied to a mannequin thanks to the CumSkyMatrix and thus evaluate the dishomogeneity of radiation exposure.This component seems not to consider the influence of vapour pressure on the result --> is it then more precise to put the MRT output (from the TCI) as an input of meanRadTemperature for SolarAdjustedTemperature?The default groundReflectivity is set to 0.25 --> is GroundReflectivity taken into account in the Tground or MRT calculation in the TCI component? If yes, what is the hypothesised groundReflectivity?The default clothing albedo of 37% (TCI-11 bodyCharacteristics) corresponds to Clothing Absorptivity of 63%?
If the CumSkyMatrix input is not supplied, I get 9 results for the mannequin --> where are those points/results coming from?
If the CumSkyMatrix input is supplied,I suppose the calculation of the 482 results correspond to a calculation method similar to the radiation analysis component that is averaged over the analysis period. Right?But I don't understand why the mannequin is composed of 481 faces and meshFaceResult gives 482 results.
Finally, what is the link between the MESH results, the solarAdjustedMRT and the Effective Radiant field ? Is there a paper to have a detailed explanation of the method?
3. Here are some results for the ParisOrly energyplus weather data. You can find here attached the grasshopper definition.There is no shading in this simulation and the result coming from the ThermalComfort indices for MRT is very different compared to the solar adjusted MRT.Why such a big difference and which of the result should be plugged into the UTCI calculation component?
Results for ParisOrly.epwM,D,H:1,1,12
Ta : 6.5°Crh: 100%globalHorizontalRadiation: 54 Wh/m2totalSkyCover: 10MRT (TCI-11): 1.2°C
_CumSkyMtxOrDirNormRad = directNormalRadiation : 0 Wh/m2diffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.64°CMRTDelta: 4.14°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.47°CMRTDelta: 3.97°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = MRT (TCI-11)solarAdjustedMRT: 5.17°CMRTDelta: 3.97°C
Thanks a lot for your helpRegards,
Aymeric
…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
azione tramite interfaccia grafica 6 ore
Interfaccia Grasshopper
Parametri e Componenti
Operazione di Logica e Matematica
Vettori
Case study: concetto base di attrattore
Gestione data matching
Primi approcci alla modellazione parametrica – 4 ore
Trasformazioni di base (sposta ruota scala orienta)
Strumenti di Morphing
Utilizzo di Sweep e Loft e di altri strumenti di creazione superfici già noti da Rhinoceros
Esercitazione pratica: creazione del modello concettuale della Serpentine Gallery - B.I.G.
Focus sulla gestione dei dati - 4 ore
Creazione e gestione delle liste
Studio del data tree
Esercitazione pratica: creazione di un soffitto cassettonato
Creazione di geometrie tramite mesh – 6 ore
Utilizzo degli algoritmi di Delaunay
Utilizzo del Facet Dome
Utilizzo del Substrate
Utilizzo degli algoritmi di Voronoi
Esercitazione pratica: creazione di un gazebo attraverso l’uso di pattern
Creazione di ‘paneling’ di superfici curve – 6 ore
Discretizzazione di una superficie a doppia curvatura tramite pannelli piani
Strumenti analisi superfici
Visualizzazione superfici tramite falsi colori
Esercitazione pratica: creazione di una facciata interattiva
Digital Fabrication e messa in tavola – 6 ore
Interoperabilità tra Grasshopper e altri applicativi
Creazione di Truss parametrica
Gestione dell’abaco dei pezzi
Esercitazione pratica: la Facciata dello Stadio Friuli di Udine - Ipotesi di costruzione e gestione tramita fabbricazione digitale
Requisiti di accesso
Conoscenza delle tematiche CAD di base e dei comandi principali e interfaccia Rhinoceros 5.
Certificazioni
Alla fine del corso verranno rilasciate le certificazioni ufficiali da ART (Authorized Rhinoceros Trainer)
Numero partecipanti
Il corso parte al raggiungimento di un minimo di 4 persone ad un massimo di 8. Ogni partecipante dovrà essere munito di proprio computer con Rhinoceros.
Costo del corso
Il costo del corso è di 600 € + IVA
Sconto di 50,00 € per i giovani che hanno meno di 26 anni.
Ulteriore sconto di 50,00 € Early Bird per tutti coloro che si iscriveranno entro il 5 Settembre 2016
Nel prezzo è compresa l’iscrizione al FabLab Toscana – maggiori informazioni qui
FabLab Toscana
Il FabLab Toscana presenta un insieme di per i propri associati: sarà possibile l’accesso ai laboratori del FabLab (durante i normali orari di apertura), partecipare ai workshops gratuitamente o a prezzi calmierati, l’utilizzo della macchine (seguendo il regolamento interno), …
o it would cause troubles with unfolding and fabricating... that's why I used Extrude point component- it will give you similar result, but all surfaces are planar.. you can control extrusion direction with a tip point in rhino...
2)I changed tagging so every tube has 8 points form list A and 8 points from list B... first number of tag is a number of point within one tube... last number of the tag is order of tubes (I draw a little picture in GH, hope you'll understand)...I think original way of tagging wasn't really usefull.. but you can change tagging by yourself...
3) the definition is really messy, sorry about that, but it's just quite complicated task...
4)if you find some incorrect order of tagging, use the slider that controls Shift List component ... it will shift tagging..
5) if you won't be using this definition or find some better way, pleeeease don't tell me - I'll jump out the window :D ... it took me whole day to make it work :D
6)I can't guarantee you anything- I hope it works, but if not - at least I tried... so check everything (especially order of tags and points) twice before you fabricate it.. or print few tubes and make them paper first..
7)there is a part of original definition, that is not useful anymore.. I left it there, but you can delete it (I called it "UNUSED PARTS OF ORIGINAL FILE")
..good luck
Dimitri…
or create a form through code.
2) Add a public function to your component that displays this form, I recommend you use form.ShowDialog() for now to avoid weird conditions with non-modal forms.
3) Override the method Menu_AppendCustomComponentItems() on your Component and add an extra menu item that will show the form (i.e. when clicked, it will call the function defined in step [2].
4) Create a new class and derive it from Grasshopper.Kernel.Attributes.GH_ComponentAttributes. (if you don't want to offer double-click functionality, you can skip steps 4 to 6)
5) Override the RespondToMouseDoubleClick() method on the new attributes and also call the function defined in step [2]
6) Override the CreateAttributes() method on your Component class and construct an instance of the custom attributes defined in step [4] instead.
7) Once you've shown the form and the user has clicked OK, you need to assign values and invalidate the Component, then start a new Solution.
Here's some code:
Public Class MySpecialComponentAttributes
Inherits GH_ComponentAttributes
Public Sub New(ByVal comp As MySpecialComponent)
MyBase.New(comp)
End Sub
Public Overrides Function RespondToMouseDoubleClick( _
ByVal sender As GH_Canvas, _
ByVal e As GH_CanvasMouseEvent) As GH_ObjectResponse
DirectCast(Me.Owner, MySpecialComponent).DisplayForm()
Return Canvas.GH_ObjectResponse.Handled
End Function
End Class
Public Class MySpecialComponent
Inherits GH_Component
.....
.....
Protected Overrides Sub Menu_AppendCustomComponentItems( _
ByVal iMenu As ToolStripDropDown)
Menu_AppendGenericMenuItem(iMenu, "Set Values", AddressOf Menu_SetValues)
End Sub
Private Sub Menu_SetValues(ByVal sender As Object, ByVal e As EventArgs)
DisplayForm()
End Sub
Public Sub DisplayForm()
Dim frm As New MySpecialForm()
Grasshopper.GUI.GH_WindowsFormUtil.CenterFormOnCursor(frm, True)
If (frm.ShowDialog() = DialogResult.OK) Then
'Harvest values from form and assign them to local variables
Me.ExpireSolution(True)
End If
End Sub
End Class
--
David Rutten
david@mcneel.com
Turku, Finland…
sophy though, I have a rudimentary grasp of the Ancient Greeks and modern schools of thought such as Existentialism and Pragmatism, but there is certainly no depth in my understanding. However here the same rule applies. You can quote philosophy all you want, but unless you understand that which you're channelling you can be -at best- accidentally correct.
According to you, these are all vital characteristics:
Aesthetic judgement
Intuition about spatial effectiveness
Knowledge of construction materials & assembly systems
Consideration of performance-driven design properties
Mad synthesizing skillz
[1] and [2] are pretty much worthless, especially when we're dealing with students. Aesthetic judgement is not something that can be wrong or right. You can hone your aesthetic skills but you cannot cultivate better tastes. Intuition is also problematic. It's basically a stand-in for argumentation. Instead of saying "these buildings have to have 20 meters apart because of wind/sound/human perception/human psychology/light/shadow/etc. etc" is a far stronger statement than "these buildings have to have 20 meters apart because of my feelings". Who are you to be trusted? If you have a long and distinguished career backing you up, maybe your opinions carry some weight, but until that point you'd better be prepared to justify your decisions with cold hard logic and data.
[3] is certainly important for certain jobs in construction, but it can be argued that implementation details are not necessarily central to a design. One can design a good computer interface without having to be able to program, and certainly without being familiar with all the idiosyncrasies of a particular programming language. Conversely, one can design an excellent space without knowing exactly how strong certain atomic bonds are. If what you design is physically impossible, then obviously something has to change, but it doesn't mean that the design as an abstract idea was bad. Of course on the other hand one can argue that designing impossible things is not doing anyone any favours. I'm not exactly certain where I stand on this issue, probably comfortably in the middle; YES, students need to learn about what can be build in the physical world, but NO that is not part of design training.
I'm not quite sure what [4] means.
[5] is true for a lot of professions, not just Architects. I would concede that architects probably have more to take into account than most designers and that it is indeed an important skill to have.
I would say that -especially for students, who have little experience- an incredibly important skill to be able to ask yourself "why am I doing this?" about pretty much every decision you make. Basically you need to get very comfortable applying the Socratic method to everything you do.
--
David Rutten
david@mcneel.com
Tirol, Austria…
Added by David Rutten at 11:03am on August 14, 2013
ctor. I do not dispose of any IGH_Goo instances, mostly because I have no idea when an instance is truly no longer needed. If any of your fields need to be disposed, you may have to implement a destructor, but I have no experience with this.
2) should I pass those classes to other parameters by DA(0, MotherClass.Duplicate?) or it is already there by GH_Goo ?
IGH_Goo is not duplicated by default. If you use DA.GetData() and ask for IGH_Goo types, you'll get a reference to the same instance as exists. Thus, if you take in an instance of your type, modify and output it, you should duplicate it yourself. But you only need to do this if you change the state of an instance.
MyGooType data = null;
if (!DA.GetData(0, ref data)) return;
data = data.Duplicate() as MyGooType;
data.Property = newValue;
DA.SetData(0, data);
3) should I create ChildClass and MotherClass in SolveInstance, or create it once as a component's field and then change theirs properties and pass it to DA (as duplicate ?)....
It's almost always better to use variables with the lowest possible scope. So method variables are preferred to class variables, class variables are preferred to static variables.
4) if I create those classes in SolveInstance, is it necessary to Dispose them there ?
NO! Do not dispose of instances that are passed on to output parameters. Disposing objects typically makes them invalid, so if you share instances with anyone else, you should not dispose them or the other code may well crash. However I don't think your types need to be disposable so this is a moot point now.
In general, if you're dealing with disposable types, and the instances aren't shared, then you dispose them as quickly as possible. But if they are shared it's a lot more complicated.
5) finally - maybe it would be better if MotherClass inherits the ChildClass ?
Maybe. Not necessarily. Depends on the classes. …
Added by David Rutten at 12:08pm on December 31, 2014
On the other hand ... well ... we can pretend that this could be some sort of add-on dedicated for broken pieces, (and nerves if loops = a big number) he he.
Anyway:
1. If you enable the history (the yellow things) you can watch the recursion working: get a donor box and "slice" it in 2 (either via an "orthogonal" plane [the fast boxes] or a random one [the slow breps]). Then get each one and repeat until the desired "depth" of "slices" is achieved (the loops, that is). Pure recursion in terms of programming (a function does something, yields results and then calls itself to further process each result).
Double click on the C# to see the code (but don't change anything). For the record this is the function that does the main job (spot the fact that if it's not terminated it calls itself [last line]):
2. The x, xy, xyz options restrict the random plane (actually in the boxes case there's another technique used (Intervals) but never mind). For instance (case random breps) the slicing plane is defined at the brep center and using a random direction:
Vector3d dir = new Vector3d(rand.NextDouble(-1,1), rand.NextDouble(-1,1), rand.NextDouble(-1,1));
If the 3rd value is 0 then the plane's YAxis is parallel to Plane.WorldXY.ZAxis.
3. Now if the "slicing" thing was a random polyline at a random plane the pieces could be far more "elaborated" (and/or "naturally looking") ... but the thing with programming is to know(?) where/when to stop.
4. This approach could use any donor Brep (a blob for instance) or a Brep List. Notify if you want to add such an option.
5. Added some lines more for an option that allows to sample the pieces (due to the last loop) in an automated flat "layout" (it's a bit more complex than it appears on first sight).
6. The x,y restriction mode now affects the random slices as well. See what I mean:
and the same restriction using boxes:
Truth is that all that freaky stuff could be helpful for you if you had serious plans to learn C# (not something achievable without pain and tears aplenty).
best…