meaning that the C# does all the work as a standalone "app"):
Plan B: Sweep1 > it doesn't work > "Karma" without doubt, he he.
Plan Z: use C# as a stand alone ring maker (Lot's of information is provided in case of failure(s) [for instance: outwards offset + sharp corners + fitOffsetCurve false]). If you opt for that, delete all the rest. To allow the C# to do the rings you just toggle createBreps true:
Plan A: toggle createBreps false and use gates to redirect flow to Plan A components.
Plan C: by pass C#, make your sections via components and connect the resulting List to the (top) Gate that controls the sections List. Not recommended for a variety of reasons ... but if you insist ...
best, Peter…
if you can't resolve the details ... well ... they do that as well. For Europe contact my good friend Peter Stevens. (BirdAir).
In general: PRIOR designing ANYTHING (at all) you must formulate some kind of collaboration with a specialized manufacturer. Problem is that ... er ... if they don't know you they don't give much attention (this is a rather "closed" AEC sector).
On the other hand if your membrane is bespoke designing the components (anchor plates, masts, tensioners etc etc) and/or using bespoke ones available in the market (not many around. mind)... well ... this IS the core of the matter. Rhino is NOT suitable for that kind of stuff by any means.
Kangaroo 1/2 is the way to go when inside GH. Other apps especially the "pro" ones are very expensive. BirdAir has the best software for that matter but is mostly an internal product available as well only for few "strategic" partners as they call Architects who can design that kind of stuff.
Other than that have some fun:
Tensile Membranes test3 - Grasshopper
And this ... well ...is about NOT doing it:
Need help about using Kangaroo for form finding
…
can work in any node of a given hierarchy tree (loaded in your work session) by making the node "active". "Nodes" can be other things as well (like workplane, clip definitions etc).
Why to do that weird thing? Well, think any design being "flat" > meaning that all objects are placed in a single file (and in a single layer). Not that good > although the items are present you barely can handle them (because power is nothing without control, he he).
Let's go one step further: we can start classifying objects in "groups" (like a directories/files organization in any O/S). This means, in MCAD speak, creating assemblies (a void thing kinda like a directory) that contain components/entities (kinda like files).
Several steps further we end up with severely nested "arrangements" of entities (an assembly could be parent of something and child of something else).
For instance, it could be rather obvious the logical classification of a "geodetic" (so to speak) structure like this : a 40000m2 "hangar" defining some thematic park.
I mean : a void master that owns 4 equal void segment sets that own 4 "legs" that own various geodesic structural members + cables + membranes + you name it etc etc.
Each "leg" owns the concrete base (Shared) and a rather complex set of objects.
Notice that some tensile membrane "fixture" combos (see above)...act as perimeter light fixtures as well...meaning that the membrane tension plate may could be a child of a void "light" parent...or may could be a "stand alone" assembly etc etc.
These arrangements can be internal (belonging in, say, a x node within the current active file) or external (belonging in a y node within another file). If they deal with the same (topologically speaking) object they define clusters of Shared entities (or variations)- where only the view transformation matrix changes (in the simple scenario, he he). For instance the disk shown above is a Shared Assembly that owns the bolts, the plates, the tension member etc etc. Selective Instancing allows modifying some attributes without affecting the topology (i.e. the geometry).
The whole (terrible) mess is controlled by some tree like "dialog" (in Catia is "transparent") that is called Structure Browser. By controlled I mean (1) display/display mode with regard any tree member combo/selection set (assembly and/or component) in any View (2) clip state control (3) active status (for modifications/variations) (4) workplane control (5) drag and drop ownership control (6) ....
Now...what if I would chan…
e like this. If you push a little plus mark the column will unfold and expand.
I am volunteering currently for this project when I have time https://github.com/CityOfNewYork/CROL-PDF
and there is a discussion of standardizing information extracted from pdfs into csv, then eventually to a json schema so that a large amount of information can be shared easily online and also visualized to allow filtering and making operations on a data set. The closest thing I know is http://openrefine.org/ but it is not an online app and not really a collaborative platform.
anyhow, columns with nested columns showing imgs with tables that corresponds to a set of paramters might be a good suppliment to parallel coordinates. since honeybee and ladybug now has a quite a large collection of analysis so if there is a way to create a pipeline from grasshopper to, yeah, something like github.io like you have it here, with a well designed JSON schema with fold-expand columns it might be a great way to keep track. just an idea, dont know how this could be achieved yet.
…
mations we use a STANDARD thingy (Plane.WorldXY) VS any other plane (that's what the Orient does). This applies for blocks/cats/dogs/anything: meaning that if anyone in the present or the future uses such a "component" he knows the origin (especially if other CAD apps are used in parallel).
2. NEVER EVER make a thing (i.e. the profile) to be oriented "off center" (in the occasion domain start/end values for x/y). If you want to do that treat the destination plane accordingly. That way you build up a mentality were the "source" is standard - so to speak.
3. RHS (but HEB/HEA/IPN/IPE blah, blah) fillets are related with thickness (in real-life) ... therefore when you offset (always inwards: meaning neg values for counter clock wise closed curves) ... take into consideration that simple fact.
…
ou mean by 'Activate Direct Rhino Modifying'. Perhaps you could expand?
I like the idea of mixing and matching script and 'direct' modeling. There seems to be a lot of potential platforms for this:
1. Implict History: Is there a way for GH to read the direct modifications (with History activated) and translate this as a component (or cluster of components?)? IH seems to record the UI events and the associated elements. GH would need to write as well as read the IH info, in order to preserve as much flexibility downstream as possible. You mentioned Houdini. H seems to record all 'implicit' or direct mods, done via the CAD mouse-based UI, in its network graph. Maybe, this should be captured in the IH cluster/component mentioned above.
2. RhinoParametrics: RP has done a lot of work to intercept and translate Rhino commands into its version of Implicit History. Seems to be centred on points, which makes sense as so much of the traditional 'dumb' way of inputing CAD info is based on mouse clicks on screen (points) predicated by commands, active locks, workplanes etc.
3. Gumball: Rubberduck's use of the new Gumball tool to capture 'direct' modeling inputs thru the Gumball points to a good source for capturing this kind or input, that is related to the 'macro recorder' approach taken by RP and IH.
4. The new Geom Cache component seems to be able to preserve a lot of info about the baked object. There may be even a way to read tagged info generated both GH baked with the "reference" object, and external to GH (by IH, the gumball or even third party apps like RP).
Would be interesting to know what kind of info is 'preserved'. Houdini seems to have a pretty consistent approach to geometric data, that seems to allow parallel NURBS/subD/mesh versions of the geometry. It also seems to have a coherent heirarchical approach to vertices/edges/loops/faces etc that allows the subelements to be arbitarily grouped for 'direct' modeling, and still be part of a procedural script.
I guess the polygon / mesh approach to geometry lends itself to this. If all the procedural commands/components all understand mesh geometry in either vertex, edge, face format, then combining direct and script modeling is doable in transparent way?
In your example above, the Geo Cache node 'flattens' the object to dumb geometry which is manipulated using Rhino, then used as a Reference object, in the next section of the graph. I guess there is nothing to stop the follow on components reading the precedenting graph for parameters, for additional intelligence?
Does GH 'get' or 'put' parameter data?
…
file. A TSpline made thing in fact.
2. This atroci ... er ... hmm ... I mean unspeakable beauty uses an exo-skeletal load bearing structure hence is THAT big (BTW: Apparently nobody knows what thermal bridge is nor thermal expansion nor vapor condensation ... but these are "minor" details these holly blob days, he he).
3. 2 means that some nodes of that "grid" MUST "meet" floors in order to support them and (hopefully) withstand some seismic forces. BTW: A Richter scale 9 (for an hour) is all what this building actually needs (that's acid "humor").
4. The "smarter" way to do this is to spread "some" (i.e a lot) random points (Note: David's algo yields "evenly-spaced-points" within the limits of the possible) on the guide blob (a polysurface in fact).
5. Then ... you need some algo that tests proximity AND "adjusts" the Z in order to have some node points "co-planar" (Z) with the floors.
6. Then you triangulate all that stuff (the points, that is) using some decent Ball Pivot Algorithm (NOT Delauney) and you get a triangulated mesh that "engulfs" the guide blob. If you want some quads (as shown) this is also possible.
7. So you have edges ... i.e poly lines (per mesh face) and if you offset them ... you have "drilling" profiles that you must use against a second guide "thickened" blob for creating a continuously smooth exo-skeletal LBS (as shown). Of course Rhino (being a surface modeller) could require years to do this solid difference opp (or an eternity).
8. Rounding the "lips" of that LBS Brep is out of question with Rhino or GH (but it can been done very easily using other apps). Then you must "split" the Brep (in modules? in nodes + "rodes"? you tell me) in order to make it in real-life (what about forgetting all that?, he he).
9. Then, there's the glazing thingy that is made via quads meaning planarity. This is achievable with Kangaroo2 but is a bit tricky.
Moral: WHAT a gigantic pile of worms is this thread of yours...
more soon.
…
r.
Jon has already done some very interesting stuff with regard decomposing matters using IFC schema (I'm not a strong admirer of any schema policy mind - for a variety of reasons).
Now the chaotic case:
1. This is deliberately fuzzy, faulty and chaotic in order to indicate the need (at least IMHO) for a next step with regard handling and visualizing (on a per individual data item basis, not on a per branch basis) data trees.
2. Why this Tree Manager future thing could boost GH up to an unseen level? Exploit the PDF attached - use Saved views and/or the Model Tree "decomposer" (file is greatly reduced in detail - only 1 out of 5 floors shown, no envelope stuff, stripped out of everything actually etc etc etc). Among a variety of things observe that there's transformations that are "selectively" applied whilst various components remain intact (in other words: invite existed "static" objects into the smart chaos) - this means that we need a far better control VS the series (of various type of data) that outline the solution of similar things.
3. What could/should do such a "visual" Tree Manager? Could he function within the existed "one Canvas for all things" environment? Do we need N "sub-canvas" (kinda the Views in any CAD app these days) to handle and visualize complex tree operations? Do we need control on a per data item basis? Do we need a re-mapper of a totally different kind? Do we need a Bake Manager? Do we need a Scenario (parameter combos stored etc) Manager?
Let's the debate begin
Best, Peter
…
next level.
This Parametric Design course will provide the participants with the necessary knowledge and ability to use Grasshopper, a free visual programming plugin in Rhinoceros; you will be guided through a series of hands-on exercises that highlight NURBS modeling and its concepts. We will introduce Grasshopper as a graphical algorithm editor tightly integrated with Rhino’s 3D modeling tools. You will also learn how Rhino is used to render models for visualization, translate 3D models for prototyping, and export 3D models into 2D CAD or graphics programs.
English is the course main language.
Location: Düsseldorf city center
Registration and buying Tickets
www.digitalparametrics.eventbrite.de
Course Calendar:
4 Days 6 hours each
Total duration 24h
2 weekends
Date:
Sat. 17 - Sun. 18 June
Sat. 24 - Sun. 25 June
10:00 - 17:00
Getting Started in Rhino. 2 days (17 - 18 June)
Getting Started in Grasshopper. 2 days (24 - 25 June)
-----------------------------------------------------------------------
Participants will be given a certificate of participation at the end of the course.
-----------------------------------------------------------------------
Course fees:
Professionals: 600€ (excl. MwSt.) Students: 500€ (excl. MwSt.) Students need to provide: Copy of current student ID or proof of student enrollment at University/School.
Group discounts:
Group of 3 professionals: 3x500 = 1500€ (excl. MwSt.)
Group of 3 Students: 3x400 = 1200€ (excl. MwSt.)
Participants are kindly asked to bring their own laptops and have pre-installed Rhino + Grasshopper.
Useful Resources:
Rhinoceros Installation (90 days full version trial available): http://www.rhino3d.com/download
Rhinoceros for Mac (includes Grasshopper) http://www.rhino3d.com/download/rhino-for-mac/5/wip
Grasshopper Free Installation: http://www.grasshopper3d.com/page/download-1
Grasshopper Free Plugins: http://www.food4rhino.com/app/lunchbox http://www.giuliopiacentino.com/weaverbird
Main Tutor:
Rihan
M.A. Dipl.Ing. Architect
Architect at RKW Architektur + Düsseldorf
For any questions about the course, please email: info@immersive-studio.com…
to carry out without them. We will go through these plugins learning how they work, main features and advantages playing with practical exercises.
We will highlight key concepts in advanced design, architecture and engineering: topology, form-finding, structural optimization, fractals, loops, genetic and repetitive algorithms...
Also, we will see how to capture nice views and designs from your scripting, with a correct export option, animations...
This course is On-line live sessions (18hours), using our platform online.controlmad.com
STRUCTURE:
- Interactive flexible geometry
- Generative design
- Reaction diffusion
- Geometry from DNA parameters
- Generative path visualization
- Growth simulation by sub-D
- Generating and genetic algorithms
- Visualization techniques
Main plug-ins shown:
> Kangaroo: The most famous and downloaded app for Grasshopper (it is built in the current Grasshopper for Rhino 6). It is a live physics engine interactive simulation, optimization and form-finding directly within Grasshopper
> Galapagos: available in the current Grasshopper build, it is a platform for the application of Evolutionary Algorithms to be used on a wide variety of problems by non-programmers
> Biomorpher: Interactive Evolutionary Algorithms (IEAs) helping designers to explore the wide combinatorial space of parametric models without always knowing where you are headed.
> Anemone: works using repetitive algorithms to create loops or sequencial structures like those ones seen in fractals.
Dates: July 10,11,17 and 18 (total 4 days)
Registration deadline: Monday, July 5th
Timetable: Saturday and Sunday 9,30 - 2pm (Madrid Time Zone CEST)…
Added by Diego Cuevas at 3:40am on September 11, 2018