as one element.
Thank you
Comment by karamba on October 7, 2014 at 11:27pm
Hello Patricio, divide the beams in such a way that each boundary vertex of the shell becomes an endpoint of a beam segment.
Best, Clemens
Comment by Llordella Patricio on October 8, 2014 at 8:30amDelete Comment
Hi Clemens,
I did what you suggested but now assemble element doesn´t work properly. Could you please tell me how to fix it? Thanks in advance, Patricio
8-10-14losa%20cadena.gh
Comment by karamba on October 8, 2014 at 11:59am
Hi Patricio, if you flatten the 'Elem'-input at the 'Assemble'-component the definition works. The triangular shell elements have linear displacement interpolations whereas the beam deflections are exact. In order to get correct results you should refine the shell mesh.
Best, Clemens
Comment by Llordella Patricio on October 9, 2014 at 8:35amDelete Comment
Hello, succeeds in creating the mesh to the slab, and built the beam segment, but when I see the deformations are not expected because the beam is deformed as the slab.
Thanks for the help
PS: maybe I'm using the program for a type of structure that is not the most appropriate, as I saw in the examples of other structures. But this type of structure is that students taught
best regards
Patricio
9-10-14%20Example%201.gh
Comment by karamba on October 9, 2014 at 10:46am
You could use the 'Mesh Edges'-component to retrieve the naked edges and turn them into beams - see attached file:91014Example1_cp.gh
Best regards,
Clemens
Comment by Llordella Patricio on October 15, 2014 at 3:41pmDelete Comment
Dear clemens
I was doing a rough estimate of the deformation, and I can not achieve the same result with Karamba. When I make a rough estimate of the result with Karamba beams and mine are very similar, I think the problem is when I connect the shell, because there are no similar results.
I sent the GH file, and an image of the calculation
The structure is concrete The result I get is 0.58cm
thank youPatricio
15-10-14%20Example.gh
Comment by karamba yesterday
Dear Patricio,
try to increase the number of shell elements. As mentioned in the manual they are linear elements. A mesh that is too coarse leads to a response which is stiffer than the real structure.
Best,
Clemens
…
complicated than it seems as I have an event and a subscriber method receiving data from a serial port.
In the code below, the strings received within myReceivedLines appear when connecting with the serial port (when connecttodevice is true). However they disapear when I launch another command (when homeallis true).
As you recommended in your reply, I have added the field called myReceivedLineswithin the class so that I could use the method String.Add() to all the feedback received and commands sent.
Why does the feedback dispear when a command is sent? Is the string going to myReceivedLine disappearing because they happen within a subscriber method or is it related to the DA.SetDataList() method used to assign myReceivedLinesto the output?
Many thanks!
public class SendToPrintComponent : GH_Component { //Fields List<string> myReceivedLines = new List<string>(); SerialPort port; //subscriber method for the port.DataReceived Event private void DataReceivedHandler(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { SerialPort sp = (SerialPort)sender; while (sp.BytesToRead > 0) { try { myReceivedLines.Add(sp.ReadLine()); } catch (TimeoutException) { break; } } } protected override void SolveInstance(IGH_DataAccess DA) { //Opening the port if (port == null) { string selectedportname = default(string); DA.GetData(1, ref selectedportname); int selectedbaudrate = default(int); DA.GetData(2, ref selectedbaudrate); //Assigning an object to the field within the SolveInstance method() port = new SerialPort(selectedportname, selectedbaudrate, Parity.None, 8, StopBits.One); //Enables the data terminal ready (dtr) signal during serial communication (handshaking) port.DtrEnable = true; port.WriteTimeout = 500; port.ReadTimeout = 500; } //Event Handling Method bool connecttodevice = default(bool); DA.GetData(3, ref connecttodevice); if (connecttodevice == true) { if (!port.IsOpen) { port.DataReceived += new SerialDataReceivedEventHandler(DataReceivedHandler); DA.SetDataList(0, myReceivedLines); port.Open(); } } else if (port.IsOpen) { port.DataReceived -= new SerialDataReceivedEventHandler(DataReceivedHandler); port.Close(); } if (port.IsOpen) { DA.SetData(1, "Port Open"); } //If the port is open do all the rest if (port.IsOpen) { bool homeall = default(bool); DA.GetData(5, ref homeall); //Home all sends all the axis to the origin if (homeall == true) { port.Write("G28" + "\n"); myReceivedLines.Add("G28" + "\n"); DA.SetDataList(2, myReceivedLines); } } else { DA.SetData(1, "Port Closed"); } }}…
curve or locus] of a segment AB, in English. The set of all the points from which a segment, AB, is seen under a fixed given angle.
When you construct l'arc capable —by using compass— you obviously need to find the centre of this arc. This can be easily done in GH in many ways by using some trigonometry (e.g. see previous —great— solutions). Whole circles instead of arcs provide supplementary isoptics —β-isoptic and (180º-β)-isoptic—. Coherent normals let you work in any plane.
Or you could just construct β-isoptics of AB by using tangent at A (or B). I mean [Arc SED] component.
If you want the true β-isoptic —the set of all the points— you should use {+β, -β} degrees (2 sides; 2 solutions; 2 arcs), but slider in [-180, +180] degrees provides full range of signed solutions. Orthoptic is provided by ±90º. Notice that ±180º isoptic is just AB segment itself, and 0º isoptic should be the segment outside AB —(-∞, A] U [B, +∞)—. [Radians] component is avoidable.
More compact versions can be achieved by using [F3] component. You can choose among different expressions the one you like the most as long as performs counter clockwise rotation of vector AB, by 180-β degrees, around A; or equivalent. [Panel] is totally avoidable.
Solutions in XY plane —projection; z = 0—, no matter A or B, are easy too. Just be sure about the curve you want to find the intersection with —Curve; your wall— being contained in XY plane.
A few self-explanatory examples showing features.
1 & 5 1st ver. (Supplementary isoptics) (ArcCapableTrigNormals_def_Bel.png)
2 & 6 2nd ver. (SED) (ArcCapableSED_def_Bel.png)
3 & 7 3rd ver. (SED + F3) (ArcCapableSEDF3_def_Bel.png)
4 & 8 4th ver. (SED + F3, Projection) (ArcCapableSEDProjInt_def_Bel.png)
If you want to be compact, 7 could be your best choice. If you prefer orientation robustness, 5. Etcetera.
I hope these versions will help you to compact/visualize; let me know any feedback.
Calculate where 2 points [A & B] meet at a specific angle is just find the geometrical locus called arco capaz in Spanish, arc capable in French (l'isoptique d'un segment de droite) or isoptic [curve or locus]
of a segment AB, in English. The set of all the points from which a segment,
AB, is seen under a fixed given angle.…
l coarse mesh
Subdividing this mesh into strips of thin quads
Relaxing/Planarizing this mesh
Splitting and Unrolling
In this post I deal with the first 2 of these stages.
You can download the example definition here:
developable_strips_tutorial.gh
Drawing the initial mesh
To begin with we need a simple quad mesh. This can be modelled manually in Rhino, and only needs to use enough quads to give the topology and very rough form. No need to worry too much about the exact geometry or dimensions at this point, as we will refine and alter it as we go.
One very important thing that we do need to bear in mind though is that all internal vertices must have even valence (I covered this a bit in the earlier post here).
So for example, this is bad:
(because the highlighted vertex is surrounded by 5 faces)
While this is good (and can still be relaxed to the same shape):
(the top and bottom vertices have valence 8, and the vertices between the arms have valence 4)
With a little practice it should be possible to convert any mesh into one that meets this condition.
The reasons why we need this condition should become more clear in the later steps.
First subdivision
This is where we choose how many strips we want our final model to have, by applying a few rounds of subdivision using the Refine component (you could also use Weaverbird here):
Sorting the face directions
While quad meshes do not carry the same information about u/v directions as a NURBS surface, the individual faces do have a sort of direction given by their vertex ordering. However, these face directions are usually not consistently arranged, especially after subdivision.
The Kangaroo MeshDirection component attempts* to orient all the faces in a mesh so that they match with their neighbours.
For example, before sorting, if we draw a line from the midpoint of the first edge of each face to the midpt of its opposite edge, we might get something like this:
Whereas after sorting, we should get something like this:
*note that I say it attempts to orient the faces consistently. In some cases no valid solution exists, for instance if 3 or 5 faces meet around a vertex, hence the requirement mentioned at the start for even valence vertices.
Directional Subdivision
Now that we have consistent face directions across the mesh, we can apply further subdivision, but this time in one direction only. So we go from roughly square quads to thin rectangles. The idea is that as we apply higher levels of this directional subdivision, the final relaxed result goes towards something semi-discrete. A NURBS surface is fully continuous, and a mesh is fully discrete (made up of separate facets), while this strip model will be smooth in one direction and faceted in the other.
Go to part 2 for the next step of the process
…
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
eration!
See an example work flow for designing, simulating and analysing a Photovoltaic system below.
Download a Grasshopper and Rhino example file:
https://www.dropbox.com/s/krbszlplj5i40dz/017_HBgeneration%20Rhino%20model.3dm?dl=0
https://www.dropbox.com/s/lxneuzal3mipd2q/017_HBgeneration.gh?dl=0
See a quick introduction and tutorial videos here: https://www.youtube.com/playlist?list=PLrx2KnyhaJ5YXo5hpk8Q9q4Vy99O5IegK
1. Select a building to mount a photovoltaic generator on (seen in Rhino in green).
2. Select a surface within that building to mount a photovoltaic generator on (seen in Rhino in green).
3. Create a Honeybee context surface from that surface.
4. Place a photovoltaic generator on that Honeybee context surface by using the Honeybee generation component. Honeybee_Generator_PV and connecting the context surface to it's input _HBSurfaces. Then you can specify both the performance and the financial data of the photovoltaic generator.
5. Create a Honeybee generation system which consists of the photovoltaic generator in 4. By using the component Honeybee_generationsystem and connecting 4 to its input PVHBSurfaces_. Then you can specify the annual maintenance cost of this system.
6. Run the simulation in Energy Plus by connecting 5. to the input HBGenerators_.
7. Read the results of the simulation:
- The electricity produced by the Honeybee generation system in 5.
- The net purchased electricity of the facility (the Honeybee zone) to which the Honeybee generation system is attached to. This is the electricity consumed by the facility less the electricity generated by the Honeybee generation system.
- The financial costs of the Honeybee generation system; capital, maintenance and replacement costs.
8. Calculate the net present cost of the Honeybee generation system in 5 assuming a 25 year lifetime.
9. Visualise the net present cost.
…
rring to the above image)
Area
effective
effective
Second
Elastic
Elastic
Plastic
Radius
Second
Elastic
Plastic
Radius
of
Vy shear
Vz shear
Moment
Modulus
Modulus
Modulus
of
Moment
Modulus
Modulus
of
Section
Area
Area
of Area
upper
lower
Gyration
of Area
Gyration
(strong axis)
(strong axis)
(strong axis)
(strong axis)
(strong axis)
(weak axis)
(weak axis)
(weak axis)
(weak axis)
A
Ay
Az
Iy
Wy
Wy
Wply
i_y
Iz
Wz
Wplz
i_z
cm2
cm2
cm2
cm4
cm3
cm3
cm3
cm
cm4
cm3
cm3
cm
I have a very similar table which I could import to the Karamba table. But I have i_v or i_u values as well as radius of inertia for instance.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
dimensjon
Masse
Areal
akse
Ix
Wpx
ix
akse
Iy
Wpy
iy
akse
Iv
Wpv
iv
Width
Thickness
Radius R
[kg/m]
[mm2]
[mm4]
[mm3]
[mm]
[mm4]
[mm3]
[mm]
[mm4]
[mm3]
[mm]
[mm]
[mm]
[mm]
L 20x3
0.89
113
x-x
4,000
290
5.9
y-y
4,000
290
5.9
v-v
1,700
200
3.9
20
3
4
L 20x4
1.15
146
x-x
5,000
360
5.8
y-y
5,000
360
5.8
v-v
2,200
240
3.8
20
4
4
L 25x3
1.12
143
x-x
8,200
460
7.6
y-y
8,200
460
7.6
v-v
3,400
330
4.9
25
3
4
L 25x4
1.46
186
x-x
10,300
590
7.4
y-y
10,300
590
7.4
v-v
4,300
400
4.8
25
4
4
L 30x3
1.37
175
x-x
14,600
680
9.1
y-y
14,600
680
9.1
v-v
6,100
510
5.9
30
3
5
L 30x4
1.79
228
x-x
18,400
870
9.0
y-y
18,400
870
9.0
v-v
7,700
620
5.8
30
4
5
L 36x3
1.66
211
x-x
25,800
990
11.1
y-y
25,800
990
11.1
v-v
10,700
760
7.1
36
3
5
L 36x4
2.16
276
x-x
32,900
1,280
10.9
y-y
32,900
1,280
10.9
v-v
13,700
930
7.0
36
4
5
L 36x5
2.65
338
x-x
39,500
1,560
10.8
y-y
39,500
1,560
10.8
v-v
16,500
1,090
7.0
36
5
5
I have diagonals (bracings) which can buckle in these "non-regular" directions too, and they do. If I could add those values then in the Karamba model I could assign specific buckling scenarios..... I can see another challenge which will be at the ModifyElement component, I will not be able to choose these buckling lengths, in these directions.
Do you think this functionality can be added within short, or should I try to find another way to model these members?
Br, Balazs
…
r." I'm sorry to hear that, I take the interface and ease-of-use rather seriously so this sounds like a fundamental failure on my part. On the other hand, Grasshopper isn't supposed to be on a par with most other 3D programs. It is emphatically not meant for manual/direct modelling. If you would normally tackle a problem by drawing geometry by hand, Grasshopper is not (and should never be advertised as) a good alternative."What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design."Grasshopper ships with about 1000 components (rounded to the nearest power of ten). I'm adding more all the time, either because new functionality has been exposed in the Rhino SDK or because a certain component makes a lot of sense to a lot of people. Adding pre-canned components that do the same as '8 or 10 components strung together' for the heck of it will balloon the total number of components everyone has to deal with. If you find yourself using the same 8 to 10 components together all the time, then please mention it on this forum. A lot of the currently existing components have been added because someone asked for it."[...] has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others."Again, GH was not designed to be an alternative to these sort of modellers. I don't like referring to GH as 'parameteric' as that term has been co-opted by relational modellers. I prefer to use 'algorithmic' instead. The idea behind parameteric seems to be that one models by hand, but every click exists within a context, and when the context changes the software figures out where to move the click to. The idea behind algorithmic is that you don't model by hand.This is not to say there is no value in the parametric approach. Obviously it is a winning strategy and many people love to use it. We have considered adding some features to GH that would make manual modelling less of a chore and we would still very much like to do so. However this is such a large chunk of work that we have to be very careful about investing the time. Before I start down this road I want to make sure that the choice I'm making is not 'lame-ass algorithmic modeller with some lame-ass parametrics tacked on' vs. 'kick-ass algorithmic modeller with no parametrics tacked on'.
Visual Programming.I'm not exactly sure I understand your grievance here, but I suspect I agree. The visual part is front and centre at the moment and it should remain there. However we need to improve upon it and at the same time give programmers more tools to achieve what they want.
Context sensitivity."There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them."Unfortunately it's not as simple as that. Whether or not a conversion between two data types makes sense is often dependent on the actual values. If you plug a list of curves into a Line component, none of them may be convertible. Should I therefore not allow this connection to be made? What if there is a single curve that could be converted to a line? What if you want to make the connection now, but only later plan to add some convertible curves to the data? What you made the connection back when it was valid, but now it's no longer valid, wouldn't it be weird if there was a connection you couldn't make again?I've started work on GH2 and one of the first things I'm writing now is the new data-conversion logic. The goal this time around is to not just try and convert type A into type B, but include information about what sort of conversion was needed (straightforward, exotic, far-fetched. etc.) and information regarding why that type was assigned.You are right that under some conditions, we can be sure that a conversion will always fail. For example connecting a Boolean output with a Curve input. But even there my preferred solution is to tell people why that doesn't make sense rather than not allowing it in the first place.
Sliders."I think they should be optional."They are optional."The “N” should turn into the number if set."What if you assign more than one integer? I think I'd rather see a component with inputs 'N', 'P' and 'X' rather than '5', '8' and '35.7', but I concede that is a personal preference."But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly."Agreed.
Components."Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings."I was thinking of just zooming in on a component would eventually provide easier ways to access settings and data."Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?"It's almost impossible for me to know whether these things are 'unlikely' in any given situation. There are probably some cases where a suggestion along the lines of "Hey, this component is about to run 40,524 times. It seems like it would make sense to Graft the 'P' input." would be useful.
Integration."Why isn't it just live geometry?"This is an unfortunate side-effect of the way the Rhino SDK was designed. Pumping all my geometry through the Rhino document would severely impact performance and memory usage. It also complicates the matter to an almost impossible degree as any command and plugin running in Rhino now has access to 'my' geometry."Maybe add more Rhino functionality to GH. GH has no 3D offset."That's the plan moving forward. A lot of algorithms in Rhino (Make2D, FilletEdge, Shelling, BlendSrf, the list goes on) are not available as part of the public SDK. The Rhino development team is going to try and rectify this for Rhino6 and beyond. As soon as these functions become available I'll start adding them to GH (provided they make sense of course).On the whole I agree that integration needs a lot of work, and it's work that has to happen on both sides of the isle.
Documentation.Absolutely. Development for GH1 has slowed because I'm now working on GH2. We decided that GH1 is 'feature complete', basically to avoid feature creep. GH2 is a ground-up rewrite so it will take a long time until something is ready for testing. During this time, minor additions and of course bug fixes will be available for GH1, but on a much lower frequency.Documentation is woefully inadequate at present. The primer is being updated (and the new version looks great), but for GH2 we're planning a completely new help system. People have been hired to provide the content. With a bit of luck and a lot of work this will be one of the main selling points of GH2.
2D-ness."I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen?"I don't fully disagree. A lot of geometry is either flat or happens inside surfaces. The reason there's no shelling (I'm assuming that's what you meant, there are two Offset Surface components in GH) is because (a) it's a very new feature in Rhino and doesn't work too well yet and (b) as a result of that isn't available to plugins.
Organisation.Agreed. We need to come up with better ways to organise, document, version, share and simplify GH files. GH1 UI is ok for small projects (<100 components) but can't handle more complexity.
Don't get me wrong, I appreciate the feedback, I really do, but I want to be honest and open about my own plans and where they might conflict with your wishes. Grasshopper is being used far beyond the boundaries of what we expected and it's clear that there are major shortcomings that must be addressed before too long. We didn't get it right with the first version, I don't expect we'll get it completely right with the second version but if we can improve upon the -say- five biggest drawbacks (performance, documentation, organisation, plugin management and no mac version) I'll be a happy puppy.
--
David Rutten
david@mcneel.com…
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…