ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
ing the maps to the broader community.
At the moment, there are just a few known issues left that I have to fix for complex geometric cases but they should run smoothly for most energy models that you generate with Honeybee. Within the next month, I will be clearing up these last issues and, by the end of the month, there will be an updated youtube tutorial playlist on the comfort tools and how to use them.
In the meantime, there's an updated example file (http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map) and I wanted to get you all excited with some images and animations coming out of the design part of my thesis. I also wanted to post some documentation of all of the previous research that has made these climate maps possible and give out some much deserved thanks. To begin, this image gives you a sense of how the thermal maps are made by integrating several streams of data for EnergyPlus:
(https://drive.google.com/file/d/0Bz2PwDvkjovJaTMtWDRHMExvLUk/view?usp=sharing)
To get you excited, this youtube playlist has a whole bunch of time-lapse thermal animations that a lot of you should enjoy:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A
To give a brief summary of what you are looking at in the playlist, there are two proposed designs for completely passive co-habitation spaces in New York and Los Angeles.
These diagrams explain the Los Angeles design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJM0JkM0tLZ1kxUmc/view?usp=sharing)
And this video gives you and idea of how it thermally performs:
These diagrams explain the New York design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJS1BZVVZiTWF4MXM/view?usp=sharing)
And this video shows you the thermal performance:
Now to credit all of the awesome people that have made the creation of these thermal maps possible:
1) As any HB user knows, the open source engines and libraries under the hood of HB are EnergyPlus and OpenStudio and the incredible thermal richness of these maps would not have been possible without these DoE teams creating such a robust modeler so a big credit is definitely due to them.
2) Many of the initial ideas for these thermal maps come from an MIT Masters thesis that was completed a few years ago by Amanda Webb called "cMap". Even though these cMaps were only taking into account surface temperature from E+, it was the viewing of her radiant temperature maps that initially touched-off the series of events that led to my thesis so a great credit is due to her. You can find her thesis here (http://dspace.mit.edu/handle/1721.1/72870).
3) Since the thesis of A. Webb, there were two key developments that made the high resolution of the current maps believable as a good approximation of the actual thermal environment of a building. The first is a PhD thesis by Alejandra Menchaca (also conducted here at MIT) that developed a computationally fast way of estimating sub-zone air temperature stratification. The method, which works simply by weighing the heat gain in a room against the incoming airflow was validated by many CFD simulations over the course of Alejandra's thesis. You can find here final thesis document here (http://dspace.mit.edu/handle/1721.1/74907).
4) The other main development since the A. Webb thesis that made the radiant map much more accurate is a fast means of estimating the radiant temperature increase felt by an occupant sitting in the sun. This method was developed by some awesome scientists at the UC Berkeley Center for the Built Environment (CBE) Including Tyler Hoyt, who has been particularly helpful to me by supporting the CBE's Github page. The original paper on this fast means of estimating the solar temperature delta can be found here (http://escholarship.org/uc/item/89m1h2dg) although they should have an official publication in a journal soon.
5) The ASHRAE comfort models under the hood of LB+HB all are derived from the javascript of the CBE comfort tool (http://smap.cbe.berkeley.edu/comforttool). A huge chunk of credit definitely goes to this group and I encourage any other researchers who are getting deep into comfort to check the code resources on their github page (https://github.com/CenterForTheBuiltEnvironment/comfort_tool).
6) And, last but not least, a huge share of credit is due to Mostapha and all members of the LB+HB community. It is because of resources and help that Mostapha initially gave me that I learned how to code in the first place and the knowledge of a community that would use the things that I developed was, by fa,r the biggest motivation throughout this thesis and all of my LB efforts.
Thank you all and stay awesome,
-Chris…
/www.grasshopper3d.com/forum/topics/vb-vs-c-vs-python
http://www.grasshopper3d.com/forum/topics/which-programming-language-should-i-focus-on-vb-or-python
VB.Net and C#
VB.Net and C# both belong to the ".Net" family of languages, and the things you can do with them in Rhino/Grasshopper are nearly 100% equivalent. Grasshopper itself was written in a combination of VB.Net and C#. Some advantages/comments, in no particular order:
Performance - VB.Net and C# scripts tend to execute faster because they are "Just-in-time" compiled as opposed to interpreted.
Autocomplete - both VB.Net and C# have rich autocomplete functionality in their respective script editor components - significantly more so than the python editor. This can be helpful for beginners since you can "hunt" for methods and properties by just typing a "." after an object name and looking at the list of available methods/properties.
Native Component development - If you eventually want to develop GHA assemblies/plug-ins for grasshopper, as of Rhino 5 you will have to use one of these two languages. However, there are plans to introduce python-based plugins in Rhino 6. Even so, the resources around plug-in development are very rich in the C# and VB.Net environments (with c# seeming to be the more popular of the two).
"Strong Typing" - VB.net to some degree, and C# especially, are less "forgiving" languages than python - they require you to know about the data type of the objects you're operating on. This can sometimes result in more verbose code - as you explicitly convert from type to type - but it also promotes good programming practice and helps make errors more understandable.
.Net ecosystem - using a .Net language means you have access to the thousands of libraries publicly available, and the process of referencing these libraries and making use of them is comparatively straightforward relative to python. More on this in the following section.
Resources/Support - At least as of 2012, VB and C# turned up more results on this forum than python, and I think you'll find slightly more expert-level coders in those languages able to help you here.
Which one between the two? C# or VB.Net? - Personally, I greatly prefer C# - I find it to be cleaner and clearer to use. I also have some programming background in C++/Java/Processing so I found the "C family" approach to be more familiar. As David and Damian point out in some of the posts linked above, C# is more popular than either python or VB.net in the rest of the coding world. However, if you are learning without any prior programming experience you may find VB.net to be a bit easier to learn.
Python
Python is, without a doubt, a beautiful and elegant language, which is probably more than can be said for VB.Net/C#. It is very popular with beginner coders, and its syntax is more readily understandable.
Syntax - Python is beautiful to read and write. Its syntax is very clear and free of extraneous punctuation (for example the ";" line endings in c#). It has many very nice language features that make common tasks more concise, like its loop syntax, list comprehensions, list "map" and "filter."
Multiple ways to talk to Rhino/Grasshopper - Python enables two general approaches to interacting with the Rhino/Grasshopper environment: RhinoCommon and RhinoScriptSyntax. If you have prior experience with Rhinoscript, you may find RhinoScriptSyntax to be preferable - it adapts many of the methods you're familiar with to the python language, and simplifies some tasks. A word of caution though - working with Rhinoscriptsyntax can introduce a performance hit relative to RhinoCommon operations. C# and VB.net by contrast can only work with RhinoCommon.
"Goodies" - The Python environment in Grasshopper has some "special features" that the other languages lack. In particular, the "GHPythonLib" library enables the ability to call most Grasshopper components from within your code, and the ability to easily enable parallel processing to improve performance. (A word of caution though - these two features do not seem to "play well" with each other, there may be bugs causing memory leaks that result in increasingly worse performance with each execution).
Cross-Platform - Unlike C#/VB.net, Python can be used natively in Rhino for Windows and Rhino for Mac.
Direct scripting in Rhino - You can also use Python directly in the Rhino environment without the need for Grasshopper if you desire, using the Rhino Python editor.
IronPython / Ecosystem issues - one frustration / potential downside to working with Python for Rhino/GH is that though there is a vast, amazing ecosystem of external libraries for Python, getting these to install/work properly in the Rhino/GH environment can be a real pain - largely because the language is actually "IronPython," a version of python designed to work closely with the .Net ecosystem. Many popular libraries like numpy and scipy are very challenging to get working in Rhino/GH.
Scripting in other programs - Especially in the AEC industry, Python is a popular scripting language for other applications. Tools like Revit, Dynamo, Blender, and ArcGIS all offer their own Python scripting interface - so learning Python in Rhino/GH can give you a leg up in eventually scripting in these other programs.
Python's Stock is Rising - there are currently a number of efforts to improve the "status" of python within the Rhino/GH ecosystem. The python editor in Rhino 6 has a number of improvements, not least of which is the ability to "compile" add-ons for Grasshopper written in python. I'm sure Giulio can speak to other upcoming improvements.
I hope this summary helps you find the right option for you. Ultimately you can't go wrong; concepts from any of the available scripting languages will make it much easier to learn the next one. In my day to day work I use a combination of both C# and python, where appropriate, and I love them both.
I hope others will feel welcome to chime in on this FAQ and add their own thoughts about advantages/disadvantages of these various options! If you have time, read through some of the other posts linked to at the beginning - there's lots of additional great information there. …
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
,with OpenfoamV1612+ in Windows 10 64bit.The blockmesh worked good.And the snappyhexmesh crashed in the process.My computer memory is not enough? Or some settings wrong?Could you help me solve this question?/---------------------------------------------------------------------------| ========= | || \ / F ield | OpenFOAM: The Open Source CFD Toolbox || \ / O peration | Version: v1612+ || \ / A nd | Web: www.OpenFOAM.com || \/ M anipulation | |*---------------------------------------------------------------------------*/Build : v1612+Exec : snappyHexMeshDate : Aug 27 2017Time : 09:39:54Host : "default"PID : 13443Case : /home/ofuser/workingDir/butterfly/outdoor_airflownProcs : 1sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //Create time
Create mesh for time = 0
Read mesh in = 2.14 s
Overall mesh bounding box : (-241.5472 -241.4418 0) (496.4376 536.2438 144.8633)Relative tolerance : 1e-06Absolute matching distance : 0.001081851
Reading refinement surfaces.Read refinement surfaces in = 0.01 s
Reading refinement shells.Refinement level 3 for all cells inside around_buildings_area.stlRead refinement shells in = 0 s
Setting refinement level of surface to be consistent with shells.For geometry outdoor_airflow.stl detected 0 uncached triangles out of 120Checked shell refinement in = 0 s
Reading features.Read features in = 0 s
Determining initial surface intersections
Edge intersection testing:Number of edges : 1684728Number of edges to retest : 1684728Number of intersected edges : 5583Calculated surface intersections in = 1.68 s
Initial mesh : cells:554112 faces:1684728 points:576779Cells per refinement level:0 554112
Adding patches for surface regions
Patch Type Region
outdoor_airflow:
6 wall buildings
Added patches in = 0.03 s
Edge intersection testing:Number of edges : 1684728Number of edges to retest : 0Number of intersected edges : 5583Selecting decompositionMethod none
Refinement phase
Found point (127.4452 147.401 72.43167) in cell 402042 on processor 0
Surface refinement iteration 0
Marked for refinement due to surface intersection : 8820 cells.Determined cells to refine in = 3.87 sSelected for refinement : 8820 cells (out of 554112)Edge intersection testing:Number of edges : 1883850Number of edges to retest : 250376Number of intersected edges : 21198Refined mesh in = 1.77 sAfter refinement surface refinement iteration 0 : cells:615852 faces:1883850 points:652499Cells per refinement level:0 5452921 70560
Surface refinement iteration 1
Marked for refinement due to surface intersection : 38502 cells.Determined cells to refine in = 0.04 sSelected for refinement : 40392 cells (out of 615852)Edge intersection testing:Number of edges : 2787132Number of edges to retest : 1118049Number of intersected edges : 85655Refined mesh in = 3.17 sAfter refinement surface refinement iteration 1 : cells:898596 faces:2787132 points:990317Cells per refinement level:0 5432351 486812 306680
Surface refinement iteration 2
Marked for refinement due to surface intersection : 159213 cells.Determined cells to refine in = 0.1 sSelected for refinement : 168471 cells (out of 898596)Edge intersection testing:Number of edges : 6576117Number of edges to retest : 4737635Rhino Model and GH files is in t'he zip file.Please help me solve this question!~~…
or a couple of thingies.
Pattern.gh
I defined parametrically a triangle which I then smoothed out to become more like a blob shape. After that I created a pretty simple pattern that I had in my mind (costed me a lot of time to make this in GH) and finally wanted to rotate each element as it goes higher . The dispatching part seems to be working pretty slow, so it might need an optimization, but I’m still happy with the result as it shows exactly what I wanted, so this is a minor issue in my case.
I then decided to try tessellating my extrusions. You’ll see the voronoi script which is a blob-group in the same Pattern.gh:
I had an idea of something and started the code from scratch, then decided to watch tutorials and implement the code shown there. I somehow coped to combine my code with this in the tutorials, but since my knowledge of Grasshopper is zero to basic my code seems to be very unoptimized and lagging.. When dragging the sliders, it takes a lot of time to compute the changes, although, I’m working on a 24gigs 6th gen i7 machine. It might also need optimization.
Here comes the first tricky part that I couldn’t sort out in an elegant way neither in Grasshopper nor in Rhino. I want a smooth transition between the wall and the ceiling, so that the voronoi tessellation doesn’t get interrupted. If I was to do it in Rhino I’d make a curve with a filleted edge which I’d then revolve/sweep along a rail.
Pattern.gh:
Second thing is – I’ve defined a shape which I want to rotate at a certain degree as it goes higher, however, I don’t have the knowledge to make this happen automatically and just copy the script over and over again. Is there a chance to somehow “loop” the code and parametrically define the degree of rotation and amount of units in the loop?
Next thing is I want to somehow be able to rotate each “6-storey-building” dependently on its surrounding buildings, so that their “terraces” never overlap. I’m using quotes, since they’re still some silly shapes that have nothing to do with buildings and terraces. The principle has to be something like gear wheels or the so-called rack wheels . There has to be some pace which I could set parametrically, but I’m still unsure how to do that in Grasshopper.
The pre-last thing is that I want to control the height of each “building” based on let’s say a topography. I presume this could be done somehow with height maps or some gradient mapper connected to curvature analysis. Not really sure how something like this would work, but I’ve seen such codes that control height depending on a variable.
The last one is more or less similar to the previous. I want to be able to “dissolve” the pattern that I initially created and make it irregular. I suppose this could be done with attractor curve, but again this is just a guess. Please note that this is a top view and the shapes on the upper-left corner have got more "wings" which means there is more floors in the according building. Let's say the buildings in the upper-left corner are 6-7 floors high, in the middle are 4-5 and to the right they're only 3 floors high.
Sorry for that many questions in a single thread. Please let me know if I have to split them in separate threads. All this information is needed for learning purposes. I’m now preparing myself for my bachelor thesis and try as much things as I could, so that I’ll be ready for the final stage of my bachelor’s degree.
Many thanks in advance! Cheers!…
ome work to create a ZScript macro for custom routines, but you can record those in ZBrush and then merely need to edit them into my script, inline, as bulk multiple-lines you just paste in, no problem as long as you strip the ZBrush button definition at the beginning.
ZBrush has a very high initial learning curve because of its non-standard interface. However, it has the world's most powerful quad remeshing and now mesh Booleans too. I needed a replacement for slow and especially non-robust marching cubes (Cocoon/Monolith/Dodo/Aether etc. on Grasshopper) that tended to bog down or blow up. IntraLattice was a step in a good direction but it can't merge fattened lines that merely cross each other with no breaks or that physically overlap on purpose to have many curve on in to a hub. But with $800 ZBrush 4R8, the latest version, that I can create English language ZScripts for, I suddenly have, often in the blink of an eye, or at worst a few seconds, right back into Rhino Grasshopper, a perfectly joined, airtight and smoothed mesh blending of upwards of thousands of input mesh pieces that overlap in ways Rhino will never Boolean union.
There is no complicated installation of anything since it's all done in Python.
The ZBrush program itself pops up while it works, and is then automatically backgrounded to bring you back to Grasshopper. It keeps running though, for fast iterations with no program startup time.
This is a general toolkit to expose myriad very advanced features of ZBrush into being just another Grasshopper plug-in like the rest.
It works by accepting a Grasshopper mesh and writing it to disk as an OBJ file, then incorporates ZBrush settings for a given command into a text format ZScript file, also written to disk from Python based on Grasshopper inputs, then ZBrush is told to run the script via Windows command line, and the exported OBJ output is read back from disk back into a Rhino Grasshopper mesh, in about a hundred lines of code.
Despite a change in mesh definition in Rhinocommon from version 5 to 6, I made it work on both versions.
So far this is only one command, the newly improved mesh Boolean union. It gives quad meshes, but they still look healthy when quickly triangulated in Rhino (as seen on top, above).
The ZBrush ZRemesher is utterly astounding in ability to transform any mesh into a direction following, error free quad mesh that can be converted to NURBS actually, via T-Splines smooth mode. That will be the next port to Grasshopper. I hope architects pick up on this more orderly manner of patterning surfaces than the alien slime of random point Voronoi.
Commercial software has the best code, not open source stuff, so far, so this is serious work to bring world class tools into Grasshopper where we can rapidly prototype computational strategies.
Here is a thread with several examples of ZBrush Boolean union remeshing applied to 3D trusses, compared to both IntraLattice and marching cubes:
http://www.grasshopper3d.com/forum/topics/custom-unit-cell-bug-in-intralattice-plug-in?commentId=2985220%3AComment%3A1828609
The same strategy of generating script files I used to port OpenFlipper, here, for triangle remeshing, which can now be combined with ZBrush Boolean unions of arbitrary assemblies of mesh units:
http://www.grasshopper3d.com/forum/topics/best-uniform-remesher-for-patterning-organic-suraces
UPDATE: I revamped the workflow so now components feed raw ZScript into a sequencer. Then only a single ZScript is assembled and sent to ZBrush so Python never gets ahead of ZBrush (!):
It is easy to DIY roll your own now:
…
Added by Nik Willmore at 6:48am on October 12, 2017
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…