o 'curves'. In the script, it still expects 'x'. I have to add another input before it will refresh and call the input 'curves'.
2/ Upon loading gh, it gives the following error message. This has only happened since upgrading from version 9.0075 to 9.0076
Priority: PreLoad
{
Method not found: 'System.String Grasshopper.Kernel.GH_ComponentServer.CopyFileToRoamingFolder(System.String, Boolean)'.
MissingMethodException
}
3/ I also posted a few bugs here a while ago, just wanted to bump that up:
http://www.grasshopper3d.com/forum/topics/some-gh-bugs?commentId=2985220%3AComment%3A1068289&xg_source=msg_com_forum
Thanks!
Steven…
the "port" input. I would really appreciate any help!
For example, my Arduino board is connected to COM 3. The "ports available" component correctly identifies this port, and I know there is nothing wrong with the port itself since the Arduino communicates through COM 3 without problem when using an Arduino sketch.
The runtime error produced by the Firefly open/close port component:
1. Solution exception:Could not load type 'Grasshopper.Instances' from assembly 'Grasshopper, Version=1.0.0.20, Culture=neutral, PulicKeyToken=null'.
System specs:
Windows 7 64-bit
Rhinoceros 4.0 SR 9
Grasshopper Build 0.8.006
Firefly Build 1.0067
Arduino Uno R3
These error messages appear when Grasshopper is loaded from Rhino. They first appeared when Firefly was installed:
Object: Mega_Write (level 1){ Exception has been thrown by the target of an invocation. TargetInvocationException}
Object: Mega_Write (level 2){ Method not found: 'Void Grasshopper.Kernel.GH_PersistentParam`1.SetPersistentData(System.Object[])'. MissingMethodException}
Object: Uno_Write (level 1){ Exception has been thrown by the target of an invocation. TargetInvocationException}
Object: Uno_Write (level 2){ Method not found: 'Void Grasshopper.Kernel.GH_PersistentParam`1.SetPersistentData(System.Object[])'. MissingMethodException}
Object: ArduinoBake (level 1){ Exception has been thrown by the target of an invocation. TargetInvocationException}
Object: ArduinoBake (level 2){ Method not found: 'Void Grasshopper.Kernel.GH_PersistentParam`1.SetPersistentData(System.Object[])'. MissingMethodException}
Thank you for your help!
Colin…
that data via serial to an external program to play as MIDI.
The problem is, I am using a third-party (Spikenzie Labs) serial-to-midi converter that cannot speak to the COM port while Firefly also does. Bear with me, as I am just starting to figure this out, but I imagine the following possibilities:
1. Hardwire an actual MIDI-out into my prototype and code it so that the signal is sent this way. Get a MIDI-to-USB cable and go into a different COM port.
2. Set up a virtual serial port? No idea if this is a thing.
3. Internalize the serial-to-midi conversion/TX to my Grasshopper/Firefly setup. I don't really know what this entails.
Any thoughts?Thanks as always for all of your digital trailblazing...
Josh…
Added by Joshua Jordan at 12:47pm on November 4, 2013
picture:
... and on a PC without anything attached to the serial port. When you open the port, start the read component and its timer, do you then get a stream of <empty> values in the log output? (hmmm... I suppose that's only reasonable - but still, you are also seeing this?)
I suppose that, because of the mutually exclusive behavior of both the spider and grasshopper (i.e. only one at a time can access the COM port), we can deduce that we are listening on the correct port.
Am I listening on the correct pin (if such a notion makes sense at all)? If I look back to the spider software, I see that 9 channels are listed and that it's only the measured value on channel 0 that changes when I press the load cell. Channels 1, 2, and 3 report OVERFLOW; 4, 5, 6, and 7 are pretty much constant at 0.000 to 0.005 V; and channel 8 says FFFF. I do not know how things like that work so I do not know if they reflect reading from the 9 pins on the D-sub 9 connector.
As for your BTW question: no, I don't need to record all of the sensor values. I suppose that the Out value on the Read component will always reflect the most current value and that's all that I need to get on with life. In the end, the idea is that we have 4 load cells in the 4 corners of a plate onto which a vertical pipe is fixed. Loads are then put on the top end of the pipe and we'll have to visualize both direction and magnitude of the bending moment that is calculated from the compression - tension readings from the load cells... We've done this on a scaled model and streamed load cell information into MatLab. Now we'll have to use a different datalogger and I was hoping to be able to do the post processing in Rhino.
wim…
nt%3A1077447&xg_source=msg_com_forum
Now my file is like this
quite complicated. So I wonder whether I can do it with Hoopsnake, repeating process 1 for 4 times.
But the process involves 3 different starting input (in Circle 2), which is like this
Input a is the origin of the first rod (O1), Input b is to determine the direction of A1-O2, and Input c is the direction of the first rod (vector O1-A1).
I wonder how these 3 starting data can be calculated respectively in the iterations? Perhaps this involves some manipulation of data tree?
Can anyone give some suggestions? Thank you in advance for any help!
…
ceros.
Public concerné /
Architectes et designers, utilisateurs de Rhino souhaitant paramétrer Rhinocéros à l’aide de Grasshopper, programme
associant des composants et une structure de graphe interagissants avec le modèle Rhino.
Une bonne connaissance de Rhinocéros est nécessaire. La langue de la formation est le français.
Structure et Objectif de la formation /
La formation se déroule sur 3 jours : les 2 premières journées sont consacrées aux « fondamentaux » de Grasshopper
avec en préambule une introduction au design et à l’architecture paramétrique et leurs impacts dans la conception, la
création et la construction.
La troisième journée sous forme d’atelier est dédiée à l’étude de cas concrets proposés par les stagiaires, qui, quelques
jours avant la formation, pourront envoyer leurs projets par mail à info AT rhinoforyou DOT com
Les stagiaires, après la formation, pourront rester en contact avec les formateurs de HDA par le biais du blog
complexitys.com et le twitter @HDA_Paris. La durée de cette formation permettra d’atteindre une autonomie et une
bonne compréhension basée sur des exemples concrets.
3 Formules possibles /
3 jours ( Initiation+Atelier ) : du lundi 20 septembre au mercredi 22 septembre
2 jours ( Initiation ) : lundi 20 et mardi 21 septembre
1 jour ( Atelier ) : mercredi 22 septembre
Programme ind icatif des notions traitéES pendan t la formation /
Introduction à la conception Paramétrique . Rhinoscript, Grasshopper: différences et similarités . Interface
graphique de Grasshopper . Objets, Données, Listes . Opérateurs scalaires : La mathématique de
Grasshopper . Gestions des données : la logique de Grasshopper . Vecteurs, Points, Lignes, Surfaces : La
géométrie de Grasshopper . Listes, Arbres, Branches . Le dessin paramétrique: exercices divers et exemples
. Références, Bibliographie, Support de cours . Ateliers d’architecture et design paramétrique (3ème jour) .
Moda lité de la formation /
Venir avec un PC portable équipé de Rhinocéros version 4.0 SR 7 et de la dernière version du plug-in
Grasshopper (téléchargeable sur www.grasshopper3d.com).
Le coût du stage est de 350 € HT/jour par personne.
Réserver votre place dès que possible car les places sont limitées à 10 participants maximum.
Inscriptions et renseignements: Jacques Hababou, info AT rhinoforyou DOT com
Pour en savoir plus sur l’architecture paramétrique: www.complexitys.com…
o sensor Shield V5.0 - 2 standard servos (plugged into pins 9 and 10 in the sensor shield) - 7.5V wall power supply - USB cable to computer
I'm running Rhino SR 8 on a 32 bit Windows Vista machine I have Version 0.9.0014 of grasshopper (the latest) and Firefly_Build_1.0067 I have flashed my Arduino board with the latest firefly firmata (updated September 10th, 2012)
I have checked that I am using the "MEGA write" box I have got the right bits going to the right pins and I have checked that they all have "servo" ticked instead of "digital" or "pwm"
My servos and board work perfectly well with the normal Arduino software, but just not any longer with firefly since my computer was switched off.
The port shows correctly as COM 4 and opens fine.
When I move the slider to control the servos, the TX light is on and the RX light flashes, but no servos move... (everything works with the sweep example in arduino though, so I have eliminated power and wiring issues)...
Any ideas what might be the problem?
I've tried re-installing, switching off and on many times, changing cables, trying a different board (also doesn't work any more with the duemilanove), trying all pins on the shield, trying one servo without the shield, trying one servo with the shield, lots of googling, lots of searching forums, unblocking the firefly installation files in explorer, lots of things... I'm all out of ideas... And very confused as it was working just a few days ago... Am I just missing something really obvious or could there be an issue with the software at my end?…
imilar topic with a Windows 10 user, which successfully fixed this issue.If you are tiny little patient, I think we can try the same steps in your Windows 7 case.For start, try these three steps:1) Close Rhino. Restart your PC. 2) Once the PC boots up, double click on the "regMapWinGIS.cmd" file in "MapWinGIS" installation folder.3) When it closes the Command Prompt window it opened, try running Rhino, Grasshopper and drop the "Gismo Gismo" component on the canvas (Grasshopper working area).If this does not help (you get the same COM class factory CLSID error message coming out from the "Gismo Gismo" component), then try the following steps, one by one:
1) Close Grasshopper and Rhino2) Run the Revo Uninstaller Pro and uninstall your MapWinGIS application along with removing all the leftovers from the registry. You can download 30 days trial version of it from here. Here is a youtube example of a bit older Revo Uninstaller. But the important part is that is shows how registry leftovers are removed.3) Restart your PC, and once it boots again, make sure that you are logged in as an Adminstrator!4) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".5) Turn off your Antivirus, which ever it is.6) Download the 64 bit version of v4.9.4.2 MapWinGIS.7) Right click on downloaded MapWinGIS-only-v4.9.4.2-x64.exe file, and choose "Properties". If there is "Unblock" button click on it, and then click on "OK". If there is no "Unblock" button, just click on "OK".8) Left double click on MapWinGIS-only-v4.9.4.2-x64.exe file and install it to "C:\dev\MapWinGIS" folder. Choose "Full installation" during installation process!9) In your Start menu's search box type: "CMD". Once the "Command prompt" appears do not left click on it! Instead right click on it, and choose "Run as Administrator".10) A command prompt window will open. Type the following command:
"your_regsvr32_folder_path\regsvr32.exe" /u /s c:\dev\mapwingis\mapwingis.ocx
If command does not result in an error message, then type this one afterwards:
"your_regsvr32_folder_path\regsvr32.exe" /s c:\dev\mapwingis\mapwingis.ocx
11) If no error appeared again, then open your Rhino and Grasshopper and check what "Gismo Gismo" component prints from its "readMe!" output.If errors appeared, please post their screenshots. Thank you in advance.
Please accept my apologies for the large number of steps. Some of them are quite simple actually (click on this, download that...).…
Added by djordje to Gismo at 12:58pm on November 28, 2017
both my plotter/cutter and wide format printer. I had been running the plotter from my main work laptop - a Win10 machine via the plotters USB port. As it turns out you can't get Win XP drivers for this USB connection so I needed another solution.
I tried to use the plotters DB25 serial port connection using an old DB9 to DB25 modem cable I had in my collection = no luck the plotter wouldn't talk. A bit more research and it turns out these plotters need a 'null modem' cross over cable to operate. I found a pic of the correct wiring online and made up my own with some cable and connectors from the local electronics hobby shop.
With this hooked up and using Hyperterminal I was able to fire some codes to the plotter directly and get a response back - winning!
At this point I got my original code working with the 'net use' redirect from LPT1 to COM1.
HOWEVER - being that the plotter was now on a COM port there are a few more interesting things you can do with it - one is being able to read the paper size/cut area from the printer.
So what I needed to to was find a way to send and receive data to/from the plotter using the serial port.
A bit of research into .NET's serial port interface and using a bunch of small pieces of test code I have manged to completely re-jig this driver.
Upgrades include:
- Direct Serial Port comms using Null Modem cable (a USB to serial adaptor + null modem should also work)
- Plot area read from the plotter - a rectangle the size of the plot area is placed on a separate layer and coloured red
- Testing to see if selected plotting curves are both closed and inside of the cutting area - with errors shown and exiting if they are not right.
- After plot 'parking' of the plot head at the end of the cut items + an adjustable offset (currently requires manual resetting of origin on the plotter before for next cut)
Great thing is it is now 100% running within Rhino Python - no DOS command line calls = no flashing up of the CMD wind. Also no temp files needed on the HDD and no limit to number of curves that can be plotted - tested with 200 or so with no issues.
Overall very happy with whole project - have learnt a LOT about Python and .NET interfacing AND ended up with a very handy/useful tool.
Cheers
DK
# This code is a WIP # It plots directly to a DGI Plotter# via the serial port
import System.IO.Ports as Portsimport rhinoscriptsyntax as rsimport time
#Some setup valuescom_port = 'COM1' #change to match plotter port baud_rate = 9600 #change to match plotter settingplotter_step = .025 #mmfinsh_offset = 10 #mm
#Delete old cutting area and cut objectsif rs.IsLayer('Cutting Area'): rs.PurgeLayer('Cutting Area')if rs.IsLayer('Cutting Objects'): rs.PurgeLayer('Cut Objects')
#Setup Serial PortMyport = Ports.SerialPort(com_port)Port_Write = Ports.SerialPort.WriteMyport.BaudRate = baud_rateMyport.ReadTimeout=5000 #5 secsMyport.Close()Myport.Open()
#Setup PlotterPort_Write(Myport, 'PU;PA0,0;IN;\n')Port_Write(Myport, 'SP1;\n')Port_Write(Myport, 'PA;\n')time.sleep(2)
#Read the Paper size from PlotterPort_Write(Myport, 'OH;') #HPGL read limits codetime.sleep(2)
return1 = ''papersize = ''count = 0char_in_buffer = 0chars_in_buffer = Ports.SerialPort.BytesToRead.GetValue(Myport)
if chars_in_buffer == 0: print 'Plotter not ready' Myport.Close() exit()
while (count < chars_in_buffer): return1 = Myport.ReadChar() papersize = papersize + chr(return1) count = count + 1
papersize = papersize.split(",")rect1 = (float(papersize[2])*plotter_step)rect2 = (float(papersize[3])*plotter_step)
print 'Cutting area = ' + str(rect1) + 'x' + str(rect2)
#place cutting area curve on its own layer, make it red and lock itplane = rs.WorldXYPlane()cutting_area = rs.AddRectangle( plane, (rect1), (rect2))rs.AddLayer (name='Cutting Area', color=(255,0,0), visible=True, locked=True, parent=None)rs.ObjectLayer(cutting_area, 'Cutting Area')
#get plotting objects
allCurves = rs.GetObjects("Select curves to plot", rs.filter.curve)
#test to see if these are closed curves - exit if not
for curve in allCurves: test_closed = rs.IsCurveClosed(curve) if test_closed == 0: print "One or move of these curves are not closed" Myport.Close() exit()
#test to see if these are inside cutting area - exit if not
for curve in allCurves: test_inside = rs.PlanarClosedCurveContainment(curve, cutting_area)
if test_inside==0 or test_inside==1: print "One or more of these curves are outside of cut area" Myport.Close() exit()
#All ok - convert to points and send data to printer
rs.AddLayer (name='Cut Objects', color=(0,255,0), visible=False, locked=True, parent=None)
for curve in allCurves: Port_Write(Myport, 'PU;PA;SP1;\n') polyline = rs.ConvertCurveToPolyline(curve,angle_tolerance=5.0, tolerance=0.025, delete_input=False, min_edge_length=0, max_edge_length=0) points = rs.CurveEditPoints(polyline) rs.ObjectLayer(polyline, 'Cut Objects')
# PU to the first point x = points[0][0] y = points[0][1] Port_Write(Myport, 'PU' + str(int(x / plotter_step)) + ',' + str(int(y / plotter_step)) + ';\n') # PD to every subsequent point i = 1 while i < len(points): x = points[i][0] y = points[i][1] Port_Write(Myport, 'PD' + str(int(x / plotter_step)) + ',' + str(int(y / plotter_step)) + ';\n') i += 1
Port_Write(Myport,'PU;\n')
#find the far end of the cutbox = rs.BoundingBox(allCurves)far_end = str(box[1])far_end = far_end.split(",")far_end = far_end[0]far_end = float(far_end)/plotter_stepfar_end = (int(far_end))+ finsh_offsetfar_end = str(far_end)print (far_end)
#return plotter home and close portPort_Write(Myport, 'PU;PA' + far_end + ',0;IN;\n')Port_Write(Myport, 'SP1;\n')Port_Write(Myport, 'PA;\n')Myport.Close()time.sleep(10)…