le and grasshopper timer to simplify simulation control. Double click the main Kangaroo component to open this remote. There are buttons for Stop(reset), Play, Pause, and Step (moves the simulation forward one iteration).
Line-line force - allows interaction between line segments - they are treated as rigid cylinders. As with springs, there are settings for offset and rest distance, so this can be used to simulate colliding rods, and also for keeping cylinders tangent to one another (can be used for reciprocal structures).
Gear simulator - collision between curves in a plane, can be used for various mechanical simulations - cams, gears, rack and pinions etc.
Developablize force - adjusts vertices of a mesh locally, to make angles around each interior vertex sum to 2*Pi, so the mesh can be unfolded to a flat sheet without stretching.
Volume dependent pressure force - allows you to set a rest volume for a mesh instead of just a fixed pressure. When combined with Laplacian smoothing for area minimization, this can be used to optimize for CMC (constant-mean-curvature) surfaces. It will also work on open meshes.
Translation lock - maintains a fixed relationship between a pair of points. This can be used to enforce periodic boundary conditions for TPMS.
Equalize angles force - given a set of angles (defined by 3 points each), this tries to adjust them all to become equal.
Mirror symmetry force - can be used to minimize curvature variation, and optimize for higher order curve continuity. It can also be used for simulating torsional resistance in curved rods.
True minimal surface relaxation - Laplacian smoothing force now includes an option for cotangent weighting, which optimizes for zero mean curvature, unlike spring based methods, or uniform weighted Laplacian smoothing which only roughly approximate this.
Fast sphere collide - allows much faster collision detection between large numbers of spheres. By placing these spheres at the vertices, this can also be used for collision between meshes.
Force-density element - an experimental one, more on this later
Projected-force - adjusts its strength so the component of the force in a given direction stays constant.
New mesh tools:
WarpWeft - sorts the edges of a quad mesh into warp and weft directions. This can be used to assign them different stiffness in fabric form-finding.
Checkerboard - sort the faces of a mesh into 2 lists so that 2 faces of the same colour are never adjacent.
MeshDirection - sorts the vertices of a quad mesh to give it a sort of u-v directionality
Refine Strips - subdivision in one direction only - can be used to generate developable strips
Stripper - separates out the strips of quads from a larger mesh
Unroller - unfolds a quad strip to flat without stretching
MeshMap - maps points from one mesh to another (can be used together with circle-packing to generate conformal mappings)
Reciprocal structure - generates starting geometry for a reciprocal structure from any input mesh (using the Plankton mesh library *Note* If you already have the Plankton components installed, you will need to update to version 0.3.0, which is available from here)
ReMesher - adjusts the connectivity of a mesh by flipping, splitting and collapsing edges to make all edge lengths closer to a target value
Diagonalize - creates a new face for every edge of the original mesh. Can be used on quad meshes to easily convert to a diagrid.
Refine - simple non-smoothing subdivision, splitting quads into 4 quads, and triangles into 4 triangles
QuadDivide - subdivide quads by any number squared, not just powers of 4
Corners - finds the corner vertices of a quad mesh
ByParent - simple quad subdivision, keeping the output grouped by parent face.
User objects:
The download comes with an increased collection of user objects to simplify setting up common simulation types - Including a simple to use origami simulator, a reciprocal structure generator, and a tool to generate compact circle packings from a CP mesh.
General:
Geometry input now accepts polylines and straight curves.
Hinges can now be fold completely flat in both directions.
Various other minor bug fixes and speed improvements (including much faster removeDuplicatePoints/Lines components)
*****
I've not yet updated all the documentation and example files to reflect this new version, but over time I will keep posting here with new demos and explanation of all these new features. I'll try and add a few new examples each week. Vote in the comments below if there is a feature mentioned above that you're particularly keen to hear more about soon.
No doubt there are still some bugs to be discovered. If something isn't working the way you expect or want it to, please post in this forum (ideally with a description or sketch of what you think should be happening, and a clear description of what happens instead and any error messages).
There are also some more new features that weren't quite ready to make it into this release, but are on the way shortly...
Kangaroo remains completely free, for personal, academic, and commercial use. I'm always interested to hear about projects done using it, and suggestions for improvements or additions.
Daniel
…
ger work.
Be aware, this release breaks file-forwards compatibility. You will not be able to open gh and ghx files saved with 0.8.0050 on previous versions, though of course you should be able to open old files without problems. If this is not the case, please yell loudly.
If you're having trouble loading Grasshopper, note that you must have the latest Microsoft C++ Runtimes installed on your machine. They can be downloaded from the microsoft website.
The new release can be downloaded from the usual location.
Here's a list of changes, additions and fixes since 0.8.0013:
File format forwards compatibility has been broken. You will not be able to open files saved with 0.8.0050 on earlier versions.
This release contains many breaking changes and GHA libraries compiled for older version may not work anymore.
Grasshopper Binary files (*.gh) are now saved as compressed data.
Grasshopper Binary files (*.gh) are now the default format.
Support for ancient versions of the Text Panel (still called Post-It from back then) has been removed.
Support for ancient versions of the Path Mapper (still called Path Lexer from back then) has been removed.
Placeholders for ancient versions of the Graph Mapper have been removed.
Gradient input parameters now show state tag icons (Reversed, Flatten etc.).
Geometry Cache name changes are now updated on every key press.
Geometry Cache name changes can now be cancelled with Escape.
Geometry Cache name changes can now be undone.
Mesh|Mesh intersection component now uses a different algorithm. The old behaviour is still available from the component menu.
Warning and Error balloons are now drawn as part of a Canvas Widget and will no longer show up in the Hi-Res image export.
Galapagos now accepts multiple fitness values. The true fitness will be the average of the collection.
Galapagos wires are drawn much fainter when the Galapagos object is unselected.
Medium fast redraw mode in Galapagos now immediately redraws instead of at the end of each generation.
Redesigned all Grasshopper file format icons and added larger size icons for high-dpi explorer views.
Redesigned the Most Recently Used files menu, it should now display much quicker.
Compass widget has been rewritten in an attempt to increase display performance.
Added preferences section for Compass widget.
Added preferences section for Align widget.
Added preferences section for Default Preview colours.
Added preferences section for Document Preview colours.
Added preferences section for the Most Recently Used files menu.
The Area component now accepts Breps, Meshes and Planar Closed Curves.
The Area Centroid component now accepts Breps, Meshes and Planar Closed Curves.
The Volume component now accepts Breps and Meshes.
The Volume Centroid component now accepts Breps and Meshes.
Added Merge Faces component (Surface.Util panel).
Added a Mesh Smooth component (Mesh.Util panel).
Added a Curve Seam component (Curve.Util panel).
Added Interpolate Curve With Tangents component (Curve.Spline dropdown).
Added GrasshopperFolders command to open Settings, Components and UserObject folders without loading the core plugin.
The window that reports on certain Loading Errors now has a Copy button.
Added Simplify post-process filter to parameters (in addition to Reverse, Flatten and Graft).
Parameter post processes (Reverse, Flatten, Graft & Simplify) can now also be assigned to output parameters.
Version History window now has formatting (not happy with this, I'm working on something better).
The Process Info window is gone.
Main menu has been redesigned.
Canvas toolbar has been redesigned.
Canvas context menu has been replaced by a Radial Menu.
Canvas now has a radial menu which will pop up on Middle Mouse Button clicks.
It's possible to switch between Radial and Legacy menus in the Preferences (Interface.Canvas section).
'Save As Copy' feature has been replaced by 'Save Backup' which is a GUI-less save including date+time stamp.
Added a 'Show in Folder' item to the File menu.
AutoSave settings are no longer available from the File menu, you now need to use the Preferences.
Selection shifts now also modify the view so you can use Ctrl+Left and Ctrl+Right to navigate up and downstream.
Mesh Edge display can now be toggled with Ctrl+M.
Preview modes now have shortcuts (Ctrl+1 = no preview, Ctrl+2 = wireframe, Ctrl+3 = shaded).
Solution States now have a default name.
Data Viewer window now responds to all required events.
Data Viewer window can now handle input and output parameters as well.
Canvas Navigation pane can now be dragged using the icon in the upper left corner.
The Persistent Data Editor has been redesigned.
It's now possible to select multiple items in the Persistent Data Editor list and edit their properties.
It's now possible to drag multiple items at the same time in the Persistent Data Editor list.
Item addition to the Persistent Data Editor is much improved.
The Persistent Data Editor is now non-modal.
The Canvas would remain black upon maximizing the Rhino window, this is fixed.
Sliders would cause multiple updates under certain conditions, this is fixed.
Digit Scrollers would cause multiple updates under certain conditions, this is fixed.
Pipes were inside out. This is fixed.
The curve component would not adjust invalid nurbs degrees, this is fixed.
Curves referencing Brep edges failed to load, this is fixed.
Points referencing Brep edges failed to load, this is fixed.
Referenced dlls in the VB/C# components sometimes resulted in invalid imports statements, this is fixed.
Pasting geometry in Rhino would cause a recompute of the Grasshopper solution, this is fixed.
Importing a file into the Rhino document would cause a recompute of the Grasshopper solution, this is fixed.
Galapagos would trigger superfluous solutions, this is fixed.
Mesh Solid Difference had a wrong name and description, this is fixed.
Several menu items were not greyed out despite not being usable, this is fixed.
The position and size of the Grasshopper window failed to get stored on Rhino shutdown, this is fixed.
The Persistent Data Editor would crash on parameters that did not support data proxies, this is fixed.
I'll add some additional information regarding some of the new UI features in subsequent posts.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
curve or locus] of a segment AB, in English. The set of all the points from which a segment, AB, is seen under a fixed given angle.
When you construct l'arc capable —by using compass— you obviously need to find the centre of this arc. This can be easily done in GH in many ways by using some trigonometry (e.g. see previous —great— solutions). Whole circles instead of arcs provide supplementary isoptics —β-isoptic and (180º-β)-isoptic—. Coherent normals let you work in any plane.
Or you could just construct β-isoptics of AB by using tangent at A (or B). I mean [Arc SED] component.
If you want the true β-isoptic —the set of all the points— you should use {+β, -β} degrees (2 sides; 2 solutions; 2 arcs), but slider in [-180, +180] degrees provides full range of signed solutions. Orthoptic is provided by ±90º. Notice that ±180º isoptic is just AB segment itself, and 0º isoptic should be the segment outside AB —(-∞, A] U [B, +∞)—. [Radians] component is avoidable.
More compact versions can be achieved by using [F3] component. You can choose among different expressions the one you like the most as long as performs counter clockwise rotation of vector AB, by 180-β degrees, around A; or equivalent. [Panel] is totally avoidable.
Solutions in XY plane —projection; z = 0—, no matter A or B, are easy too. Just be sure about the curve you want to find the intersection with —Curve; your wall— being contained in XY plane.
A few self-explanatory examples showing features.
1 & 5 1st ver. (Supplementary isoptics) (ArcCapableTrigNormals_def_Bel.png)
2 & 6 2nd ver. (SED) (ArcCapableSED_def_Bel.png)
3 & 7 3rd ver. (SED + F3) (ArcCapableSEDF3_def_Bel.png)
4 & 8 4th ver. (SED + F3, Projection) (ArcCapableSEDProjInt_def_Bel.png)
If you want to be compact, 7 could be your best choice. If you prefer orientation robustness, 5. Etcetera.
I hope these versions will help you to compact/visualize; let me know any feedback.
Calculate where 2 points [A & B] meet at a specific angle is just find the geometrical locus called arco capaz in Spanish, arc capable in French (l'isoptique d'un segment de droite) or isoptic [curve or locus]
of a segment AB, in English. The set of all the points from which a segment,
AB, is seen under a fixed given angle.…
the data structure of the input.
I'll create a component that aims to write all the GH_Paths inside the input data structure into separate output parameters. I'll add a menu item to the component that allows users to synch the number of outputs with the current data.
Note that there are some bugs I found related to Undo here, but I'll attempt to fix those asap. The mechanisms employed in this example are correct.
Let's start with the Component class definition and the constructor:
Public Class GH_ExampleComponent_VarOutput
Inherits GH_Component
Public Sub New()
MyBase.New("Extract Paths", "ExPath", "Extract all the paths from a tree", "Sets", "Tree")
End Sub
End Class
Now, the RegisterXXXXParams methods:
Protected Overrides Sub RegisterInputParams(ByVal pManager As GH_Component.GH_InputParamManager)
pManager.Register_GenericParam("Tree", "T", "Data tree to examine", GH_ParamAccess.tree)
End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As GH_Component.GH_OutputParamManager)
'We'll add one output parameter, just to not have a jagged output.
pManager.Register_PathParam("Path 1", "1", "1st path in tree")
End Sub
SolveInstance() is somewhat special, but not very complicated:
Protected Overrides Sub SolveInstance(ByVal DA As IGH_DataAccess)
'We have only one input parameter and it is set to Tree,
'so SolveInstance will only be called once for every solution.
'We don't actually need the data inside the input, we're only interested in the paths.
'So we don't actually need to call DA.GetDataTree, we can just go in and extract the
'paths directly:
Dim paths As IList(Of GH_Path) = Params.Input(0).VolatileData.Paths
'Abort if there is no tree.
If (paths.Count = 0) Then Return
'Post a warning if the number of output parameters does not
'equal the number of paths in the tree.
If (paths.Count < Params.Output.Count) Then
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "There are more outputs than paths in the tree.")
ElseIf (paths.Count > Params.Output.Count) Then
AddRuntimeMessage(GH_RuntimeMessageLevel.Warning, "There are fewer outputs than paths in the tree.")
End If
'Iterate over all paths and assign to output parameters.
For i As Int32 = 0 To Math.Min(Params.Output.Count, paths.Count) - 1
DA.SetData(i, paths(i))
Next
End Sub
Adding a menu item to the component menu is relatively straightforward, however handling the menu command requires a fair bit of logic:
Protected Overrides Sub Menu_AppendCustomComponentItems(ByVal iMenu As System.Windows.Forms.ToolStripDropDown)
'Add a single item to the component menu.
Menu_AppendGenericMenuItem(iMenu, "Synch outputs", AddressOf Menu_SynchOutputClicked)
End Sub
Private Sub Menu_SynchOutputClicked(ByVal sender As Object, ByVal e As EventArgs)
'Here we have to synch the number of output parameters with the number
'of paths in the volatile data tree in the input parameter.
'This requires a few steps:
'1. Determine whether something needs to happen at all.
'2. Record an undo event.
'3. Remove excess outputs or add missing outputs.
Dim paths As IList(Of GH_Path) = Params.Input(0).VolatileData.Paths
If (paths.Count = Params.Output.Count) Then Return 'yay, nothing needs to be done.
'Something needs to be done, record an undo state.
RecordUndoEvent("Synch output")
'We either have too few or too many outputs, determine which is the case.
If (paths.Count > Params.Output.Count) Then
'Add the missing outputs
For i As Int32 = Params.Output.Count + 1 To paths.Count
Dim param As New Grasshopper.Kernel.Parameters.Param_GenericObject()
param.Name = "Path " & i.ToString()
param.NickName = i.ToString()
If (i.ToString.EndsWith("1")) Then
param.Description = i.ToString() & "st path in tree"
ElseIf (i.ToString.EndsWith("2")) Then
param.Description = i.ToString() & "nd path in tree"
ElseIf (i.ToString.EndsWith("3")) Then
param.Description = i.ToString() & "rd path in tree"
Else
param.Description = i.ToString() & "th path in tree"
End If
Params.RegisterOutputParam(param)
Next
Else
'Remove excessive outputs
Do
If (Params.Output.Count <= paths.Count) Then Exit Do
Dim param As IGH_Param = Params.Output(Params.Output.Count - 1)
Params.UnregisterOutputParameter(param)
Loop
End If
Params.OnParametersChanged()
ExpireSolution(True)
End Sub
Finally, we must make sure that the component properly (de)serializes. This means we have to override the Write and Read methods and add additional information to the GHX archive:
Public Overrides Function Write(ByVal writer As GH_IO.Serialization.GH_IWriter) As Boolean
'We must make sure that the number of output parameters is correctly stored.
'We'll use a special function on the GH_ComponentParamServer to accompish this
'without too much sweat.
Params.WriteParameterTypeData(writer)
Return MyBase.Write(writer)
End Function
Public Overrides Function Read(ByVal reader As GH_IO.Serialization.GH_IReader) As Boolean
'Very important, we must make sure all parameters exist before we
'start with the main deserialization.
Params.Clear()
Params.ReadParameterTypeData(reader)
Return MyBase.Read(reader)
End Function
I attached a VB file that contains the code outlined above.
--
David Rutten
david@mcneel.com
Seattle, WA…
Added by David Rutten at 11:43pm on October 27, 2010
me of course!So I'll try to be as clear as possible.I have two problems.The form we have is a shade. I would like to close the shape of the top so she cancling to a bulb socket. For this, I want to keep a planar surface (the same surface asthe top of the basic shape without distortion but reduced (scale)), then connect themodified form (with the attractors points) to this surface. However, it must be dividethis surface on triangle to succeed have flat surface (because the shade is made of paper and then cut out of planar sheets).I managed to do it but very complicated and non-automatic by taking each point oneby one through lists items.Do you know a way to do it automatically and it still works even if we increase the number of facets of the form?I also have a problem with attractors points to 2 different places, to distort the basic shape and create the holes.
I could wish to create as many attractors points what I want in my program but it is limited.Do you think it is possible to group all attractors points in only component (point) to make this automatic?In my program, I have managed to use several (3) points attractors to distort the basic shape using dispatch order if I want attractors for example 24 points, I wouldcreate 24 pieces of program which is quite disturb!For holes, the problem IS exactly the same.Do you have any ideas? (If you have time).
Thanks a lot.Ines
…
n common tasks like updating GH definitions, viewing images on the GH canvass, and augmenting existing study-types. Most of the improvements to Honeybee have been in the making for a while and are just getting into the spotlight with this release. Notably, a number of improvements have been made to support large-scale full building energy models, including fixes to memory issues with large models, better components for splitting building masses into zones, and the ability to store HBZones in external files. Additionally, the THERM workflows have gotten a boost and these simulations can now be run directly from the Grasshopper canvass.
As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee before you do so and update your scripts. So, without further adieu, here is the list of the new capabilities added with this release:
LADYBUG
Better Method for Updating Old Grasshopper Files - As many of you have come to realize, Ladybug + Honeybee is updated on a fairly regular basis, with a stable release roughly every 6 months and a github version that never ceases to improve itself on a weekly basis. For this reason, we realize that updating old Grasshopper definitions to use recent components is a challenge for many of us. While we’ve had some methods for this in the past, there were always hiccups, particularly when it came to components that had new inputs/outputs since the previous version. Accordingly, Mostapha has added a new “Ladybug_Update File” component that will automatically update any Grasshopper Definition to be synchronized with the version of Ladybug+Honeybee that is currently in your toolbar (aka. the components in your userobjects folder). If there is a component that has new inputs/outputs since the time you built the definition, it will be automatically circled in red in your GH definition and a newer version of the component will be automatically added right next to this component:
While you still have to do some manual connecting of inputs to the newer component in this case, it should be much faster than our older methods and will hopefully help your old definitions survive long into the future!
EPWmap Now includes OneBuilding Files - Mostapha has added a number of new features to the EPWmap web interface that the “Download Ladybug” component connects to. Among the improvements are a color wheel that quickly shows you how hot, cold, and comfortable a given climate is and, perhaps more importantly, there is now support for EPW files sourced from OneBuilding. With the addition of many more weather files, you should now be able to use Ladybug with ease for more locations across the planet. We should also note that the “Open EPW and STAT” component that downloads/unzips files from a URL now supports OneBuilding URLs.
New Image Viewer Component - Mingbo Peng has graced Ladybug with a fantastic new “Image Viewer” component that takes a given image file on one’s machine and displays it on the Grasshopper canvas. It also enables one to pull color data off of the image with ease by simply clicking on the pixel of the image one is interested in. This new component is useful for a wide variety of cases, including the viewing of screenshots after they have been taken with the “Ladybug_Capture View” or “Ladybug_Render View” components. However, many of you will likely recognize it as most immediately useful in workflows involving image-based Honeybee Daylight (Radiance) simulations. This is particularly true as Migbo has built-in the capability to read many image file types, including PNG, JPEG, GIF, TIFF and the High Dynamic Range (.HDR) image files that Radiance Outputs:
The following video gives a quick overview of the Image Viewer’s capabilities:
The new component can be found under the Ladybug_Extra tab and I think I speak for us all in saying thank you Mingbo for this great component!
New Sun Shades Calculator Released Under WIP - After over a year of software development and nearly a career's worth of geometric math development, a joint effort between Abraham Yezioro and Antonello Di Nunzio has produced a new sun shade design component that can be described as nothing short of “magical.” Based on a similar principle to the current “Ladybug_Shading Designer,” the new component takes an input of sun vectors and produces shade geometries that can block the vectors. However, in comparison to the shading designer, the range of shade options that are available in this new component is truly staggering, ranging from classic overhangs, louvers and fins to pergolas and custom shade surfaces. Perhaps more importantly, the calculation methods used by this new component are faster and more reliable. It can currently can be found under the WIP section of Ladybug and it will continue to evolve in new versions of Ladybug.
Renewable Component Now Support Sandia and CEC Photovoltaics Modules - Polishing off his many contributions to the “Renewables” section of Ladybug, Djordje Spasic has added support for a couple more ways of defining Photovoltaic modules for renewables estimation. Specifically, the Ladybug WIP section now includes components to import modules defined with the California Energy Commission (CEC) and Sandia Labs.
HONEYBEE
Support for OpenStudio 2.x - A few months ago, the National Renewable Energy Lab (NREL) released a stable version of OpenStudio version 2, which included a number of improvements in stability and available features. This stable release of Honeybee is built to work with the new version of OpenStudio and, in the coming months, Honeybee will be adding a few more capabilities to its OpenStudio workflows to support v2.x’s new capabilities. Most notable among these will be support for OpenStudio measures. Measures are short scripts written in Ruby using OpenStudio’s SDK to quickly edit and change OpenStudio models. They are fundamental to visions of OpenStudio as a flexible energy modeling interface and to Honeybee’s goals of being a collaborative interface between the architectural and engineering industries. Stay tuned for the next release for many of these new capabilities!
Critical Memory Issue Fixed for Large Energy Models - A number of you wonderful members of our community have been aware of computer memory issues with large Honeybee models for some time (examples: 1, 2, 3, 4). Namely, a model that is larger than 50 zones could quickly eat up 16 GBs of memory and change Honeybee from a fast-flying insect to something more reminiscent of a snail. We are happy to say that, after a much longer time than it should have taken us, we finally identified and fixed the issue. In this version of Honeybee, such large models can now be created using less than 2% of the memory and time previously. Thanks to all of you who made us aware of this and hopefully you will now reap the rewards of your struggle.
Split Building Mass Component Getting a Makeover - Many of you veteran Ladybug users will recognize Saeran Vasathakumar as one of the original contributors of Ladybug who added components for solar fans and envelopes years ago. Now he’s back with new components to split a building mass into zones that are truly revolutionary in their speed and methodology. Saeran has divided the new capabilities into two components (one for floor-by-floor subdivision and another for core-perimeter subdivision) and they both can be found under the WIP section of this release. In this WIP version, core-perimeter thermal zones can only be generated for all convex and very simple concave geometries. Most concave geometries and geometries with holes (or courtyards) in them will fail. However it can handle even very complex convex geometries with speed and ease. You can expect the component to start accommodating concave/courtyard geometries very soon.
Load / Dump HB Objects to File - Keeping in line with the support of large, full building energy models, this release includes full support for two components that can dump and load any HBObjects to a standalone file. All information about HBzones can go into this file including custom constructions, schedules, loads, natural ventilation, shading devices, etc. You can then send the resulting .HB file to someone else and they can load up the same exact zones in another definition. This also makes it possible to have one Grasshopper file for generating the zones and running the simulation and another GH definition to import results and color zones/surfaces with those results, make energy balance graphics, etc.
Write ViewFactorInfo to File - After many of you asked for it, the _viewFactorInfo that is output from the “Honeybee_View Factor” component can now be written out to an external file using the same Load / Dump HB Objects components cited above. For those of you who have worked with the comfort map workflows, you probably already know that calculating these view factors is one of the most time consuming portions of building a microclimate map. Having to re-run this calculation each time you want to open up the Grasshopper script is a nuisance and, thanks to this new capability, you should only have to run it once and then store your results in an external .HB file.
Transform Honeybee Components Modified for Large Model Creation - Many large buildings today are made up of copies of the same rooms repeated over and over again across multiple floors, or along a street, etc. Accordingly, one can imagine that the fastest way to create a full building energy model of such buildings is to simply move and copy the same zones several times. This is what a new set of edits to the Honeybee Transform components is aimed at supporting by allowing one to build a custom set of zones, translate them several times with a Honeybee_Transform component, then solve adjacencies on all zones to make a complete energy model.
Central Plants Available on HVAC Systems - While Honeybee has historically supported the assigning of separate HVAC systems to different groups of zones, each HVAC was always an entirely new system from the ground up. So a building with separate VAV systems for each floor would be modeled with a different chiller and boiler for each floor. While this can be the case sometimes, it is more common to have only one chiller and boiler per building but separate air systems for each floor. The new ‘centralPlant_’ options on the Honeybee coolingDetails and heatingDetails enable you to create this HVAC structure by making a single boiler and chiller for any HVAC systems that have this option toggled on. Furthermore, in the case of VRF systems, you can also centralize the ventilation system, using the grouping of zones around a given HVAC to assign which zone terminals are connected to a given heat pump.
More HVAC Templates Added - As the profession continues to push the industry standard towards lower-energy HVAC systems, Honeybee intends to keep up. In this release, we have included a few more templates for modeling advanced HVAC systems including Radiant Ceilings, Radiant Heated Floors + VAV Cooling, and Two Ground Source Heat Pump (GSHP) systems. Variable Refrigerant Flow (VRF) systems have also gotten a large boost as it is now possible to model these systems with more efficient water-source loops. The next release will include the ability to model central ground source systems that use hydronics for heating cooling delivery.
Run THERM Simulations Directly from Grasshopper - Anyone who has used the THERM workflow in the past likely realized that, while Honeybee can write the THERM file, you would still have to open model in THERM yourself and hit “simulate” to get results. Now that LBNL has started a transition to becoming more open, they have graciously allowed free access for everyone to run THERM from a command line. What this means for Honeybee is that you no longer need to open THERM at all in order to get results and you can now work entirely in Rhino/Grasshopper. This also opens up the possibility of long parametric runs with THERM models since you can now automatically run simulations and collect results as you animate sliders, use galapagos, etc. A special thanks is due to the LBNL team for exposing this feature, including Setphen Selkowitz, Christian Kohler, Charlie Curcija, Eleanor Lee, and Robin Mitchell.
All Options Exposed for THERM Boundary Conditions - To finish off the full implementation of THERM in Honeybee, a final component has been added called “Honeybee_Custom Radiant Environment.” This component completes the access to all boundary condition options that THERM offers, including separate radiant and air temperatures, different view factor models, and the specification of additional heat flux (which is typically used to account for solar radiation).
Improvements to Schedule-Generating Components - Many of you who have watched the Honeybee energy modeling video tutorials have likely gotten in the habit of using CSV schedules for everything. While this is definitely one valid way to work, it is not always the most efficient since simple schedules can be specified much more cleanly to EnergyPlus/OpenStudio and the use of CSVs can also make it difficult to share your energy models (since you have to send CSV files along with the schedules themselves). This release adds two new schedule components that should take care of a lot of cases where CSV schedules were unnecessary. The new “Constant Schedule” component allow you to quickly make a schedule that is set at a single value or a set of constantly repeating 24-hour values. The second component allows you to create “Seasonal Schedules” by connecting “week schedules” from the other schedule components along with analysis periods in which these seek schedules operate. Together, these will hopefully make our schedule-generating habit a bit better as a community.
Lastly, many of you may know Mingbo Peng as the current maintainer of the Design Explorer web interface and the Colibri components under TTToolbox. Both of these tools have been revolutionary in enabling “brute force” studies of design spaces (aka. Grasshopper scripts where one runs all combinations of a set of sliders). Now, Mingbo has graced Ladybug with the aforementioned image viewer component and it is with pride that we welcome Mingbo Peng to the development team!
As always let us know your comments and suggestions.Cheers!
The Ladybug Tools Development Team
…
is the name of an existing layer and if so figures out the suffix 3
and creates a new layer Green4.
In order to do this I have been reading up on the sample pages and the Rhinocommon
SDK but I seem to be not grasping how to access certain members. I have written
below how I think I would access the members. Can someone please explain why my
logic is incorrect. I have a feeling I am not grasping the Structure of the classes.
This is the sample code from the LayerTables find method page in the RhinocommonSDK
Public Shared Function AddLayer(ByVal doc As Rhino.RhinoDoc) As Rhino.Commands.Result
'Does a layer with the same name already exist?
Dim layer_index As Integer = doc.Layers.Find(layer_name, True)
Since the find method is part of the LayerTables class which is part of the
Rhino.DocObjects.Tables namespace I would have thought the above would have been
Rhino.DocObjects.Tables.LayerTables.Find(layer_name,True)
thanks.…
Added by jon kontuly at 2:32pm on February 27, 2012