nd improvements. Many of the new features and components announced in the last release have become stable and have emerged from their WIP section. Additionally, after two years of work, we are happy to announce that we finally have full support of an OpenStudio connection within Honeybee, which has ushered in a whole host of new features, notably the modelling of detailed HVAC systems. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
LADYBUG
1 - Solar Hot Water Components Out of WIP
After much beta-testing, bug-fixing, and general development, all of the Photovoltaic and Solar Hot Water components are now fully out of WIP! The main component is based on a Chengchu Yan's publication. Components have been added to Ladybug thanks to the efforts of Chengchu Yan and Djordje Spasic.. See Djorje’s original release post of the solar hot water components for more information on the components that just made it out of WIP.
2 - New Terrain Shading Mask Released in WIP
In addition to Djordje’s prolific addition of renewable energy components, he has also contributed a widely-useful component to generate terrain shading masks, which account for the shading of surrounding mountains/terrain in simulations. While initially added to assist the solar radiation radiation and renewable energy components, the component will undergo development to optimize it for energy and daylight simulations over the next few months. Another new component called Horizon Angles can be used to visualize and export horizon angles. You can test them out now by accessing them in the WIP section. For more information, see Djordje’s release post on the GH forum here.
3 - New Mesh Selector Component
After realizing that the Optimal Shade Creator component has applications to a whole range of analyses, it has now been re-branded as the Mesh Selector and has been optimized to work easily with these many analyses. Specifically, the component selects out the portion of a mesh that meets a given threshold. This can be the portion of a shade benefit analysis meeting a certain level of shade desirability, the portion of a radiation study meeting a certain level of fulx, the portion of a daylight analysis meeting a certain lux threshold, and much more!
4 - Solar Adjusted Temperature Now Includes Long Wave Radiation
Thanks to a question asked by Aymeric and a number of clarifications made by Djordje Spasic, the Solar Adjusted Temperature component now includes the ability to account for long-wave radiative loss to the sky in addition to it original capability to account for short wave radiation from the sun. As such, the component now includes all capabilities of similar outdoor comfort tools such as RayMan. The addition of this capability is also paralleled by the addition of a new horizontalInfraredRadiation output on the ImportEPW component. See the updated solar adjusted example file hereto see how to use the component properly.
5 - Support for both Log and Power Law Wind Profiles
In preparation for the future release of the Butterfly CFD-modelling insect, the Ladybug Wind Profile component now includes the option of either power law or log law wind profiles, which are both used extensively in CFD studies. Thanks goes to Theodoros Galanos for providing the formulas!
6 - New Radiant Asymmetry Comfort Components
Prompted by a suggestion from Christian Kongsgaard, Ladybug now includes components to calculate radiant asymmetry discomfort! For examples of how to use the components see this example file for spatial analysis of radiant asymmetry discomfort and this example for temporal analysis.
7 - Pedestrian Wind Comfort Component Released in WIP
In preparation for the impending release of the butterfly CFD-modelling insect, Djordje Spasic with assistance from Liam Harrington has contributed a component to evaluate outdoor discomfort and pedestrian safety. The component identifies if certain areas around the building are suitable for sitting, building entrances-exits, window shopping... based on its wind microclimate. Dangerous areas due to high wind speeds are also identified.You can check it out now in the WIP section.
HONEYBEE
1 - New HVAC Systems and Full OpenStudio Support
After a significant amount of development on the part of the OpenStudio team and two years of effort on the part of LB+HB developers, we (finally!) have full support for an OpenStudio connection within Honeybee. By this, we mean that any energy simulation property that can be assigned to a HBZone will be taken into account in the simulation run by the OpenStudio component. The connection to OpenStudio has brought with it several new capabilities. Most notably, you can now assign full HVAC systems and receive energy results in units of electricity and fuel instead of simple heating and cooling loads. This Honeybee release includes 14 built-in HVAC template systems that can be assigned to the zones, each of which can be customized:
0. Ideal Air Loads 1. PTAC | Residential 2. PTHP | Residential 3. Packaged Single Zone - AC 4. Packaged Single Zone - HP 5. Packaged VAV w/ Reheat 6. Packaged VAV w/ PFP Boxes 7. VAV w/ Reheat 8. VAV w/ PFP Boxes 9. Warm Air Furnace - Gas Fired 10.Warm Air Furnace - Electric 11.Fan Coil Units + DOAS 12.Active Chilled Beams + DOAS 13.Radiant Floors + DOAS 14.VRF + DOAS
Systems 1-10 are ASHRAE Baseline systems that represent much of what has been added to building stock over the last few decades while systems 11-14 are systems that are commonly being installed today to reduce energy use. Here is an example file showing how to assign these systems in Honeybee and interpret the results and here is an example showing how to customize the HVAC system specifications to a wide variety of cases. To run the file, you will need to have OpenStudio installed and you can download and install OpenStudio from here.
In addition to these template systems within Honeybee, the OpenStudio interface includes hundreds of HVAC components to build your own custom HVAC systems. OpenStudio also has a growing number of user-contributed HVAC system templates that have been integrated into a set of scripts called "Measures" that you can apply to your OpenStudio model within the OpenStudio interface. You can find these system templates by searching for them in the building components library. Here is a good tutorial video on how to apply measures to your model within the OpenStudio interface. Honeybee includes a component that runs these measures from Grasshopper (without having to use the OpenStudio interface), which you can see a demo video of here. However, this component is currently in WIP as OpenStudio team is still tweaking the file structure of measures and it is fairly safe to estimate that, by the next stable release of Honeybee, we will have full support of OpenStudio measures within GH.
2 - Phasing Out IDF Exporter
With the connection to OpenStudio now fully established, this release marks the start of a transition away from exporting directly to EnergyPlus and the beginning of Honeybee development that capitalizes on OpenStudio’s development. As such THIS WILL BE THE LAST STABLE RELEASE THAT INCLUDES THE HONEYBEE_RUN ENERGY SIMULATION COMPONENT.
The Export to OpenStudio component currently does everything that the Run Energy Simulation component does and, as such, it is intended that all GH definitions using the Run Energy Simulation component should replace it with the OpenStudio component. You can use the same Read EP Result components to import the results from the OpenStudio component and you can also use the same Energy Sim Par/Generate EP Output components to customize the parameters of the simulation. The only effective difference between the two components is that the OpenStudio component enables the modeling of HVAC and exports the HBZones to an .osm file before converting it to an EnergyPlus .idf.
For the sake of complete clarity, we should state that OpenStudio is simply an interface for EnergyPlus and, as such, the same calculation engine is under the hood of both the Export to OpenStudio component and the Run Energy Simulation component. At present, you should get matching energy simulation results between the Run Energy Simulation component and a run of the same zones with the OpenStudio component (using an ideal air system HVAC).
All of this is to say that you should convert your GH definitions that use the Run Energy Simulation component to have the OpenStudio component and this release is the best time to do it (while the two components are supported equally). Additionally, with this version of Honeybee you will no longer need to install EnergyPlus before using Honeybee and you will only need to install OpenStudio (which includes EnergyPlus in the install).
3 - New Schedule Generation Components
Thanks to the efforts of Antonello Di Nunzio, we now have 2 new components that ease the creation of schedule-generation in Honeybee. The new components make use of the native Grasshopper “Gener Pool” component to give a set of sliders for each hour of the day. Additionally, Antonello has included an annual schedule component that contains a dictionary of all holidays of every nearly every nation (phew!). Finally, this annual schedule component can output schedules in the text format recognized by EnergyPlus, which allows them to be written directly into the IDF instead of a separate CSV file. This will significantly reduce the size of files needed to run simulations and can even reduce the number of components on your canvas that are needed to add custom schedules. For more information, see Antonello’s explanatory images here and Antonello's example file here. You can also see a full example file of how to apply the schedules to energy simulations here.
4 - EnergyPlus Lookup Folder, Re-run OSM/IDF, and Read Result Dictionary
With the new capabilities of OpenStudio, we have also added a number of components to assist with managing all of the files that you get from the simulation. In particular, Abraham Yezioro has added a Lookup EnergyPlus Folder component that functions very similarly to the Lookup Daylight Folder component. This way, you can run an Energy simulation once and explore the results separately. Furthermore, we have added components to Re-Run OpenStudio .osm files or EnergyPlus .idf files within Grasshopper. These components are particularly useful if you edit these .osm or .idf files outside of Honeybee and want to re-run them to analyze their results in Grasshopper. Lastly, a component has been added to parse the .rdd (or Result Data Dictionary) file that EnergyPlus produces, enabling you to see all of the possible outputs that you can request from a given simulation.
5 - Electric Lighting Components Out of WIP
After Sarith Subramaniam’s initial components to model electric lights with Radiance in the last release, we are happy to report that they have been fully tested and are out of WIP. Improvements include support for all types of light fixture geometries and the ability to use the components in a more “Grasshoppery” list-like fashion. See Sarith’s original release post for more information and several example files showing how to use the components can be found here. 1 , 2 , 3 .
6 - Improvements to THERM Components
A number of bug fixes and improvements have been made to the THERM components in order to make their application more flexible and smooth. Special thanks is due to Derin Yilmaz , Mel King , Farnaz , Ben (@benmo1) , and Abraham Yezioro for all of the great feedback in the process of improving these components.
7 - HBObject Transform Components
After some demand for components that can ease the generation of buildings with modular zone types, two components to transform HBObjects with all of their properties have been added to the 00 | Honeybee section. The components allow you to produce copies of zones that are translated or rotated from the original position.
8 - Comfort Maps Supports PET and Integration of CFD Results
Thanks to the addition of the ‘Physiological Equivalent Temperature’ (PET) component by Djordje Spasic in the last stable release, it is now possible to make comfort maps of PET with Honeybee. PET is particularly helpful for evaluating OUTDOOR comfort with detailed wind fields at a high spatial resolution. As such, the new PET recipe has also been optimized for integration with CFD results. The windSpeed_ input can now accept the file path to a .csv file that is organized with 8760 values in each column and a number of columns that correspond to the number of test points. Components to generate this csv from Butterfly CFD results will be coming in later releases. Stay tuned!
As always let us know your comments and suggestions.
Enjoy!Ladybug Analysis Tools Development Team
…
nts for Ladybug too. They are based on PVWatts v1 online calculator, supporting crystalline silicon fixed tilt photovoltaics.
You can download them from here, or use the Update Ladbybug component instead. If you take the first option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock").
You can download the example files from here.
Video tutorials will follow in the coming period.
In the very essence these components help you answer the question: "How much energy can my roof, building facade, solar parking... generate if I would populate them with PV panels"?
They allow definition of different types of losses (snow, age, shading...) which may affect your PV system:
And can find its optimal tilt and orientation:
Or analyse its performance, energy value, consumption, emissions...
By Djordje Spasic and Jason Sensibaugh, with invaluable support of Dr. Frank Vignola, Dr. Jason M. Keith, Paul Gilman, Chris Mackey, Mostapha Sadeghipour Roudsari, Niraj Palsule, Joseph Cunningham and Christopher Weiss.
Thank you for reading, and hope you will enjoy using the components!
EDIT: From march 27 2017, Ladybug Photovoltaics components support thin-film modules as well.
References:
1) System losses:
PVWatts v5 Manual, Dobos, NREL, 2014
2) Sun postion equations by Michalsky (1988):
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
edited by Jason Sensibaugh
3) Angle of incidence for fixed arrays:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
4) Plane-of-Array diffuse irradiance by Perez 1990 algorithm:
PVPMC Sandia National Laboratories
SAM Photovoltaic Model Technical Reference, Gilman, NREL, 2014
5) Sandia PV Array Performance Module Cover:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
6) Sandia Thermal Model, Module Temperature and Cell Temperature Models:
Photovoltaic Array Performance Model, King, Boys, Kratochvill, Sandia National Laboratories, 2004
7) CEC Module Model: Maximum power voltage and Maximum power current from:
Exact analytical solutions of the parameters of real solar cells using Lambert W-function, Jain, Kapoor, Solar Energy Materials and Solar Cells, V81 2004, P269–277
8) PVFORM version 3.3 adapted Module and Inverter Models:
PVWatts Version 1 Technical Reference, Dobos, NREL, 2013
9) Sunpath diagram shading:
Using sun path charts to estimate the effects of shading on PV arrays, Frank Vignola, University of Oregon, 2004
Instruction manual for the Solar Pathfinder, Solar Pathfinder TM, 2008
10) Tilt and orientation factor:
Application for Purchased Systems Oregon Department of Energy
solmetric.com
11) Photovoltaics performance metrics:
Solar PV system performance assessment guideline, Honda, Lechner, Raju, Tolich, Mokri, San Jose state university, 2012
CACHE Modules on Energy in the Curriculum Solar Energy, Keith, Palsule, Mississippi State University
Inventory of Carbon & Energy (ICE) Version 2.0, Hammond, Jones, SERT University of Bath, 2011
The Energy Return on Energy Investment (EROI) of Photovoltaics: Methodology and Comparisons with Fossil Fuel Life Cycles, Raugei, Fullana-i-Palmer, Fthenakis, Elsevier Vol 45, Jun 2012
12) Calculating albedo: Metenorm 6 Handbook part II: Theory, Meteotest 2007
13) Magnetic declination:
Geomag 0.9.2015, Christopher Weiss…
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
,with OpenfoamV1612+ in Windows 10 64bit.The blockmesh worked good.And the snappyhexmesh crashed in the process.My computer memory is not enough? Or some settings wrong?Could you help me solve this question?/---------------------------------------------------------------------------| ========= | || \ / F ield | OpenFOAM: The Open Source CFD Toolbox || \ / O peration | Version: v1612+ || \ / A nd | Web: www.OpenFOAM.com || \/ M anipulation | |*---------------------------------------------------------------------------*/Build : v1612+Exec : snappyHexMeshDate : Aug 27 2017Time : 09:39:54Host : "default"PID : 13443Case : /home/ofuser/workingDir/butterfly/outdoor_airflownProcs : 1sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //Create time
Create mesh for time = 0
Read mesh in = 2.14 s
Overall mesh bounding box : (-241.5472 -241.4418 0) (496.4376 536.2438 144.8633)Relative tolerance : 1e-06Absolute matching distance : 0.001081851
Reading refinement surfaces.Read refinement surfaces in = 0.01 s
Reading refinement shells.Refinement level 3 for all cells inside around_buildings_area.stlRead refinement shells in = 0 s
Setting refinement level of surface to be consistent with shells.For geometry outdoor_airflow.stl detected 0 uncached triangles out of 120Checked shell refinement in = 0 s
Reading features.Read features in = 0 s
Determining initial surface intersections
Edge intersection testing:Number of edges : 1684728Number of edges to retest : 1684728Number of intersected edges : 5583Calculated surface intersections in = 1.68 s
Initial mesh : cells:554112 faces:1684728 points:576779Cells per refinement level:0 554112
Adding patches for surface regions
Patch Type Region
outdoor_airflow:
6 wall buildings
Added patches in = 0.03 s
Edge intersection testing:Number of edges : 1684728Number of edges to retest : 0Number of intersected edges : 5583Selecting decompositionMethod none
Refinement phase
Found point (127.4452 147.401 72.43167) in cell 402042 on processor 0
Surface refinement iteration 0
Marked for refinement due to surface intersection : 8820 cells.Determined cells to refine in = 3.87 sSelected for refinement : 8820 cells (out of 554112)Edge intersection testing:Number of edges : 1883850Number of edges to retest : 250376Number of intersected edges : 21198Refined mesh in = 1.77 sAfter refinement surface refinement iteration 0 : cells:615852 faces:1883850 points:652499Cells per refinement level:0 5452921 70560
Surface refinement iteration 1
Marked for refinement due to surface intersection : 38502 cells.Determined cells to refine in = 0.04 sSelected for refinement : 40392 cells (out of 615852)Edge intersection testing:Number of edges : 2787132Number of edges to retest : 1118049Number of intersected edges : 85655Refined mesh in = 3.17 sAfter refinement surface refinement iteration 1 : cells:898596 faces:2787132 points:990317Cells per refinement level:0 5432351 486812 306680
Surface refinement iteration 2
Marked for refinement due to surface intersection : 159213 cells.Determined cells to refine in = 0.1 sSelected for refinement : 168471 cells (out of 898596)Edge intersection testing:Number of edges : 6576117Number of edges to retest : 4737635Rhino Model and GH files is in t'he zip file.Please help me solve this question!~~…
eration!
See an example work flow for designing, simulating and analysing a Photovoltaic system below.
Download a Grasshopper and Rhino example file:
https://www.dropbox.com/s/krbszlplj5i40dz/017_HBgeneration%20Rhino%20model.3dm?dl=0
https://www.dropbox.com/s/lxneuzal3mipd2q/017_HBgeneration.gh?dl=0
See a quick introduction and tutorial videos here: https://www.youtube.com/playlist?list=PLrx2KnyhaJ5YXo5hpk8Q9q4Vy99O5IegK
1. Select a building to mount a photovoltaic generator on (seen in Rhino in green).
2. Select a surface within that building to mount a photovoltaic generator on (seen in Rhino in green).
3. Create a Honeybee context surface from that surface.
4. Place a photovoltaic generator on that Honeybee context surface by using the Honeybee generation component. Honeybee_Generator_PV and connecting the context surface to it's input _HBSurfaces. Then you can specify both the performance and the financial data of the photovoltaic generator.
5. Create a Honeybee generation system which consists of the photovoltaic generator in 4. By using the component Honeybee_generationsystem and connecting 4 to its input PVHBSurfaces_. Then you can specify the annual maintenance cost of this system.
6. Run the simulation in Energy Plus by connecting 5. to the input HBGenerators_.
7. Read the results of the simulation:
- The electricity produced by the Honeybee generation system in 5.
- The net purchased electricity of the facility (the Honeybee zone) to which the Honeybee generation system is attached to. This is the electricity consumed by the facility less the electricity generated by the Honeybee generation system.
- The financial costs of the Honeybee generation system; capital, maintenance and replacement costs.
8. Calculate the net present cost of the Honeybee generation system in 5 assuming a 25 year lifetime.
9. Visualise the net present cost.
…
or a couple of thingies.
Pattern.gh
I defined parametrically a triangle which I then smoothed out to become more like a blob shape. After that I created a pretty simple pattern that I had in my mind (costed me a lot of time to make this in GH) and finally wanted to rotate each element as it goes higher . The dispatching part seems to be working pretty slow, so it might need an optimization, but I’m still happy with the result as it shows exactly what I wanted, so this is a minor issue in my case.
I then decided to try tessellating my extrusions. You’ll see the voronoi script which is a blob-group in the same Pattern.gh:
I had an idea of something and started the code from scratch, then decided to watch tutorials and implement the code shown there. I somehow coped to combine my code with this in the tutorials, but since my knowledge of Grasshopper is zero to basic my code seems to be very unoptimized and lagging.. When dragging the sliders, it takes a lot of time to compute the changes, although, I’m working on a 24gigs 6th gen i7 machine. It might also need optimization.
Here comes the first tricky part that I couldn’t sort out in an elegant way neither in Grasshopper nor in Rhino. I want a smooth transition between the wall and the ceiling, so that the voronoi tessellation doesn’t get interrupted. If I was to do it in Rhino I’d make a curve with a filleted edge which I’d then revolve/sweep along a rail.
Pattern.gh:
Second thing is – I’ve defined a shape which I want to rotate at a certain degree as it goes higher, however, I don’t have the knowledge to make this happen automatically and just copy the script over and over again. Is there a chance to somehow “loop” the code and parametrically define the degree of rotation and amount of units in the loop?
Next thing is I want to somehow be able to rotate each “6-storey-building” dependently on its surrounding buildings, so that their “terraces” never overlap. I’m using quotes, since they’re still some silly shapes that have nothing to do with buildings and terraces. The principle has to be something like gear wheels or the so-called rack wheels . There has to be some pace which I could set parametrically, but I’m still unsure how to do that in Grasshopper.
The pre-last thing is that I want to control the height of each “building” based on let’s say a topography. I presume this could be done somehow with height maps or some gradient mapper connected to curvature analysis. Not really sure how something like this would work, but I’ve seen such codes that control height depending on a variable.
The last one is more or less similar to the previous. I want to be able to “dissolve” the pattern that I initially created and make it irregular. I suppose this could be done with attractor curve, but again this is just a guess. Please note that this is a top view and the shapes on the upper-left corner have got more "wings" which means there is more floors in the according building. Let's say the buildings in the upper-left corner are 6-7 floors high, in the middle are 4-5 and to the right they're only 3 floors high.
Sorry for that many questions in a single thread. Please let me know if I have to split them in separate threads. All this information is needed for learning purposes. I’m now preparing myself for my bachelor thesis and try as much things as I could, so that I’ll be ready for the final stage of my bachelor’s degree.
Many thanks in advance! Cheers!…
option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock"). Then paste them in File->Special Folders->User Object Folder. You can download the example files from here. They act in similar way, Ladybug Photovoltaics components do: we pick a surface, and get an answer to a question: "How much thermal energy, for a certain number of persons can my roof, building facade... generate if I would populate them with Solar Water Heating collectors"? This information can then be used to cover domestic hot water, space heating or space cooling loads:
Components enable setting specific details of the system, or using simplified ones. They cover analysis of domestic hot water load, final performance of the SWH system, its embodied energy, energy value, consumption, emissions... And finding optimal system and storage size. By Dr. Chengchu Yan and Djordje Spasic, with invaluable support of Dr. Willian Beckman, Dr. Jason M. Keith, Jeff Maguire, Nicolas DiOrio, Niraj Palsule, Sargon George Ishaya and Craig Christensen. Hope you will enjoy using the components! References: 1) Calculation of delivered energy: Solar Engineering of Thermal Processes, John Wiley and Sons, J. Duffie, W. Beckman, 4th ed., 2013. Technical Manual for the SAM Solar Water Heating Model, NREL, N. DiOrio, C. Christensen, J. Burch, A. Dobos, 2014. A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015
2) Domestic hot water load: Modeling patterns of hot water use in households, Ernest Orlando Lawrence Berkeley National Laboratory; Lutz, Liu, McMahon, Dunham, Shown, McGrue; Nov 1996. ASHRAE 2003 Applications Handbook (SI), Chapter 49, Service water heating
3) Mains water temperature Residential alternative calculation method reference manual, California energy commission, June 2013. Development of an Energy Savings Benchmark for All Residential End-Uses, NREL, August 2004. Solar water heating project analysis chapter, Minister of Natural Resources Canada, 2004.
4) Pipe diameters and pump power: Planning & Installing Solar Thermal Systems, Earthscan, 2nd edition
5) Sun postion and POA irradiance, the same as for Ladybug Photovoltaics (Michalsky (1988), diffuse irradiance by Perez (1990), ground reflected irradiance by Liu, Jordan (1963))
6) Optimal system and storage tank size: A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015.…
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
peuvent se diviser une surface avec ne importe quel motif imaginable. 3. Ici, je fournir un moyen de le faire via Lunchbox ... cela fonctionne mais il est fixe et donc nous avons besoin de jouer avec des arbres de données afin de créer le motif approprié par cas. 4. L'autre composante est un joint C # qui fait beaucoup de choses autres que de diviser ne importe quelle collection de points avec de nombreux modèles (voir le modèle ANDRE que je ai fait pour vous). 5. Vous devez décomposer une polysurface en morceaux afin de travailler sur les subdivisions. 6. Je donne une autre définition ainsi que pourrait agir comme un tutoriel sur la façon de traiter des ensembles de points via des composants de GH standards et des méthodes classiques.
Avertissez si tous ceux-ci apparaissent floue pour vous: Si oui, je pourrais écrire une définition utilisant des composants de GH classiques - mais vous perdrez les variations de motifs de division.
mieux, Peter
…