e openings with the simple calculation of room air and IES.
I am testing a shoebox of 15x5m, 3m height, 2 windows of 1sqm, only 1 person of internal gains, no heating, no cooling, basically nothing.
The tests were running fine with the "Wind pressure coefficient type" as Input on the AFN simulation control. But, as the number of ach that I was obtaining was tiny (approx. 1/6 of the ach of room air) I thought that the problem could be the Input and my wind pressure coefficient calculations. Therefore, I changed the WPCoefficient type to "Average surface calculation" and I deleted all the wind pressure elements.
As soon as I change this (and only this) the simulation crashes because of the error "DualSetPointWithDeadBand: Unanticipated combination of heating and cooling loads - report to EnergyPlus Development Team" And also, my heating set point changes from -100 degrees to 12
I've look for this in the bigladder manual for energy plus and looks like if I had set a thermostatic zone control on dual set point with dead band, what I haven't, because, to be honest, I didn't even know it existed.
I hope any of you can help me, because I've been trying hard, but I don't find which is the problem.
I have to say that all the AFN data is internalised (beside the run simulation) and will be a bit difficult to read. I'm sorry for this but, as they are about 20 user objects, I thought it was too much to upload.
Thanks a lot…
alidated the entire RhinoCivil Engineering solution and migrate to a purely Rhinoceros solution.
85 components for Grasshopper among other analysis of a field study of linear project or study platform. Dedicated to the construction and engineering firms using topographic data.
FoodForRhino
Look to YouTube
Blogger
Support email: rhinodeveloppements@gmail.com…
and 3d rapid prototyping using state of the art material simulation and optimisation. Participants will be guided through methods of advanced structural analysis and evolutionary algorithms implemented in Grasshopper, Karamba and Octopus in a 5 day workshop taught by Robert Vierlinger and Matthew Tam within the premises of the Academy of Fine Arts & Design in Bratislava, Slovakia. The workshop will cover the basics of setting up a karamba definition and more advanced form finding techniques with beams and shells through to preparing files for 3d printing and 2d documentation. For the Grasshopper newcomers there is a preparatory crash course on 20 July 2015 taught by Ján Pernecký. The workshop will be held entirely in English. VENUE Academy of Fine Arts and Design in Bratislava: VŠVU / AFAD, Hviezdoslavovo námestie 18, Bratislava, Slovakia ROOM 135 PRICING Early bird Student (until Jun 30, 2015) €320 Early bird Professional (until Jun 30, 2015) €380 Regular Student (from Jun 30, 2015) €400 Regular Professional (from Jun 30, 2015) €475 The fee covers only the tuition. Travel expenses, accommodation and food is to be covered by the participants. SCHEDULE Day 1 Lecture - Karamba in Projects from Competition to Construction Introduction to karamba - Setting up a basic karamba model Shells & Beams - Understanding the impact of load on geometries. Beams - Cross Section Optimization, Load Path Emergence Day 2 Extraction and Visualization of data from Karamba Complex Geometry - Processing of Free Forms for Karamba Force Flow - Understanding and Visualizing results on shells 3d Printing - Preparing geometries for rapid prototyping Day 3 Lecture - Form Finding in Karamba Isler Shells - Hanging Forms with karamba Shells - Shape Optimisation with Galapagos Trusses - Topology Optimization with Galapagos Columns - Positioning with Galapagos Multiobjective optimisation strategies with Octopus Day 4 Frequency Analysis & Non-Linear Analysis with Karamba Extraction and Visualization Part 2 BIS - Building Information Systems with karamba Day 5 Participant’s Examples and Topics Reviewing 3d Print Studies Large Complex Models Reviewing learn techniques and strategies Concluding lecture - public PARTNERS rese arch Academy of fine arts and design…
ght on why this is, and some ideas I have for how to improve things going forward.
MeshMachine grew out of some scripts I started developing over 3 years ago (described here), originally just with the aim of achieving approximately equal edge lengths on a smooth closed triangulated mesh.
As time went on, I kept adding things, such as ways of keeping boundaries and sharp edges fixed, different ways of controlling edge lengths that vary across the surface, and different ways of pulling to surfaces.
I was also still experimenting with different rules for the core remeshing operations, such as valence driven vs angle driven edge flips.
All of these things meant many variables in the script. I wanted to share the work so others could play with it, but not really knowing exactly what people might use it for made it difficult to simplify the interface, so I just exposed most of these variables I was using (actually there were originally even more, but I felt a component with 20+ inputs was excessive, and combined some of them and fixed others to default values).
I've never been happy with that component, but some people want a component that you can just feed a surface and get a mesh with 'nice' triangles, without too much fuss or needing to know anything about how it works, while other people want to be able to vary the density based on proximity to the border, and curvature, and attractor points and see the intermediate results, and model minimal surfaces without pulling to any underlying surface, and...
Since then I did the rewrite from Kangaroo to Kangaroo2, and through that process, and associated conversations with Steve Baer, David Rutten and Will Pearson, my ideas about how to structure libraries and make cleaner more flexible Grasshopper components changed. Much of this centres around using interfaces (in the specific programming sense, not to be confused with UI), because they allow separating code into multiple components, while still allowing to edit parts of it within Grasshopper, and other parts in a proper IDE (because I find the GH code editor is not conducive to writing large amounts of well structured object oriented code).
Towards the end of last year, Dave Stasiuk and Anders Deleuran invited me and Will Pearson over to CITA for a few days of mesh and physics coding and beer drinking. During this time I made the first steps to restructuring MeshMachine to be more modular and interface based like Kangaroo2, instead of one giant script. One of the main motivations for doing this was to make it easier to combine the K2 physics library with the remeshing. However, at the time I hadn't yet released K2, so it didn't make sense to post examples that used those libraries. After the launch of K2, this restructured MeshMachine development has been a bit on the back-burner, but this discussion and Dave Stasiuk's work with Cocoon is inspiring me to pick it up again.
Seeing how you are combining the Cocoon and MeshMachine, and how Dave is also using interfaces in his recent work suggests to me it might be possible to integrate them more smoothly...
…
ly 26-27-28-29 (digital fabrication)
The third edition of digitalMed Workshop is structured as a design laboratory. Participants will learn the challenging process of producing ideas, projects and research analysis that are to be developed through specific software and concepts that emerge through the use of mapping, parametric design and digital fabrication.
The workshop will take place in the city of Salerno (Italy) and it will last 11 days structured into 3 intensive weekends: July 13-14-15 (mapping); July 19-20-21-22 (parametric design); July 26-27-28-29 (digital fabrication).
Goals and Objectives:
We aim to make clear the theoretical and technical knowledge in the approach to parametric and generative design and digital fabrication. (From collection and data management, to the manner in which these inform the geometries, to the fabrication of prototypes.)
Participants will also have the opportunity to practice the new knowledge gained in the design laboratory through project work.
Project Theme:
"Urban Field" Identify, study and analyze the system of public spaces in the urban area of the city of Salerno.
Connection, mutation, generation and evolution are the themes to be followed in project work.
Brief Description of Topics:
- Mapping. Our reality, in all its forms, has studied through concepts of the theory of Complex Systems. The techniques that will be used to study events and places of reality, will work for the management, manipulation and visualization of data and information. These will form the basis for project management and driven geometry, conducted during the second phase of the workshop.
- Parametric Design. Introduction to Rhino* and Grasshopper. Specifically, we will explain the concepts with which to work with the software of parametric design and how they function. Through these tools, we will arrive at the definition of systems of mathematical and / or geometrical relationships that are able to generate and govern patterns, shapes and objects that will inform the final design.
- Digital Fabrication. In this phase, participants of the workshop are organized into working groups. Participants have access to materials and conceptual apparatus that will take them directly to the fabrication of the geometries of the project, with the use of software CAD / CAM interface and the use of machines for the digital fabrication.
The DigitalMed workshop is organized by Nomad AREA (Academy of Research & Training in topics of Contemporary Architecture), in collaboration with the City of Salerno, the Order of Architects Province of Salerno and the National Institute of Architecture In / Arch - Campania.
Interested parties may download the Notice of Competition at the address www.digitalmedworkshop.com and fill the pre-registration no later than July 10th 2012.
PRESS OFFICE
Dr. Francesca Luciano
328 61 20 830
fra_luciano@libero.it
For information or subscriptions:
e-mail: info@digitalmedworkshop.com - tel: 089 463126 - 3391542980 …
of the new challenges presented to the society and architecture in Portugal. With technological developments, tools once limited to not creative areas begin to be part of the everyday life of students in University Architecture Laboratories and change its design processes. The architecture design methods are changing rapidly with the introduction of CAD-CAM software’s. In recent years, new software’s have been available for 3D representation and digital fabrication, which have allowed creating new ways of interacting with the computer and architecture. Contemporary architecture in its various scales, seeks greater flexibility, adaptability and interactivity taking into account both the means and goals of kinetic systems. Thus, it is essential to the creative industry players to acquire new knowledge about the latest technological innovations and how they can solve some of the problems and challenges of today’s society.
The workshop will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in all the design process, to simulation and prototype 3D interactive architecture solutions.
The theoretical and practical workshop (64 hours) taught in English and Portuguese, will be composed of two modules: (1) LS_01: Firefly +Grasshopper + Arduino and Scale Model Fabrication; (2) LS_02: Design Studio – Discursive Wall.
This workshop is intended for students and professionals from different areas of knowledge, (architecture, design, fine arts, engineering, music and programming) who are interested in the process of design: from ideation to prototyping. The participants will generate scale models.
Registration is limited to 20 participants with or without software knowledge. Participants will work individually and in group. Participants must take their own laptops to the workshop. Registrants should complete the form by 28 February 2012. Once registered, you will receive an email confirming your acceptance.
Questions or doubts contact us:
alivingsystem@gmail.com
…
Added by Brimet Silva at 7:07pm on January 16, 2012
rendo posizioni lavorative fino a qualche tempo fa impensabili. Questo nuovo approccio ha infatti la caratteristica di avvicinarsi alla programmazione informatica, ma con un approccio facilitato grazie ai componenti visuali.Hai bisogno di un motivo in più per usare Grasshopper? Eccolo! Trattandosi di uno strumento ancora in fase di testing (anche se perfettamente funzionante) l’applicativo è completamente gratuitoScarica la tua versione e inizia subito ad usarlo!Corsi certificatiLe lezioni sono tenute da Antoni(n)o Marsala, docente certicato McNeel, con alle spalle oltre 5 anni di esperienza nell’insegnamento di Rhinoceros. Negli ultimi anni abbiamo tenuto in grande considerazione l’evolversi di questo plugin e abbiamo deciso di investire sulle sue potenzialità.Nel Febbraio del 2011, grazie ad Antoni(n)o Marsala, è uscito Algoritmi Generativi, edizione italiana del libro di Zubin Khabazi Generative Algorithms with Grasshopper. Entrami sono scaricabili gratuitamente e rappresentano dei validi strumenti per capire il mondo di Grasshopper.Da diversi mesi inoltre, il Mandarino BLU, ha attivato una collaborazione con La Bottega di Galileo di Pisa, officina del libero scambio di idee, presentando dei progetti formativi post universitari, per coloro che vogliono entrare nel mondo della progettazione di nuova generazione.Dalla collaborazione con Multiverso, nasce invece un progetto formativo più ampio sviluppato a Firenze in via Campo d’Arrigo 40rLeggi il nostro programma didattico o scarica la versione in pdf…
2:
-Developing the winning design into a working application -Testing -Beers and BBQ
Details:
-Tutors: Gregory Epps, RoboFold founder, Florent Michel RoboFold software developer. -See previous workshops here. -Download Poster here.
-Please install Rhino5 and Grasshopper and Godzilla before this event.
-No previous experience with Grasshopper necessary. -Hours: 10am-6pm. -Location details: here.
***COMPETITION: THE BEST USE OF GODZILLA GETS A FREE PLACE***
Judged on creativity and practicality. Submit your name, association and a link to your video to robots@robofold.com We add an additional place for the winner. Flights, accommodation etc are not free...
Join us for the first Godzilla robot workshop - experiment with the easiest robot software on the Grasshopper platform.
More details and resources on: http://www.grasshopper3d.com/group/godzilla
Workshop Fee:
Student: £ 399
Professional: £ 599…