e chosen to dive into Grasshopper. I’m about 6 months in. If some of my comments are completely off, please take that to mean that a feature is too inaccessible to a newish user rather that it’s just missing, as I may have stated.
One of my primary pain points is this. Things that can be done in other programs are invariably easier in other programs. This is a big enough issue that I doubt there’s an easy solution that an armchair qb like myself can offer up.
The interface:
I’ve used a lot of 3D programs. I’ve never encountered one as difficult as grasshopper. What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design. Yet PTC (Parametric Technology Corp.) has been doing parametric design software since 1985 and has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others.
In the early 2000's, when parametric design software was all the rage, McNeel stated quite strongly the Rhino would remain a direct modeler and would not become a parametric modeler. Trends come. Trends go. And the industry has been swinging back to direct modeling. So McNeel’s decision was probably ok. But I have to wonder if part of McNeel’s reluctance to incorporate some of the tried and proven ideas of other parametric packages doesn't have roots in their earlier declaration to not incorporate parametrics.
A Visual Programming Language:
I read a lot about the awesomeness and flexibility of Grasshopper being a visual programming language. Let’s be clear, this is DOS era speak. I believe GH should continue to have the ability to be extended and massaged with code, as most design programs do. But as long as this is front and center, GH will remain out of reach to the average designer.
Context sensitivity:
There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them.
Sliders:
I hate sliders. I understand them, but I hate ‘em. I think they should be optional. Ya, I know I can r-click on the N of a component and set the integer. It’s a pain, and it gives no feedback. The “N” should turn into the number if set. AAAnd, sliders should be context sensitive. I like that the name of a slider changes when I plug it into something. But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly. I shouldn't be able to plug in a “50” and have everything after turn red.
Components:
Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings.
And this item I’m guessing on. I’m not yet good enough at GH to know if this may have adverse effects. Reverse, Flatten, Graft, etc.; could these be context sensitive? Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?
Tighter integration with Rhino:
I'm not entirely certain what this would look like. Currently my work flow entails baking, making a few Rhino edits, and reinserting into GH. I question the whole baking thing, btw. Why isn't it just live geometry? That’s how other parametric apps work. Maybe add more Rhino functionality to GH. GH has no 3D offset. I have to bake, offsetserf, and reinsert the geometry. I’m currently looking at the “Geometry Cache” and “Geometry Pipeline” components to see if they help. But I haven't been able to figure it out. Which leads me to:
Update all of the documentation:
I'm guessing this is an in process thing and you're working toward rolling GH from 0.9.00075 to 1.0. GH was being updated nearly weekly earlier this year. Then it suddenly stopped. If we're talking weeks before a full release, so be it. But if we're looking at something longer, a documentation update would help a lot. Geometry Cache and Geometry Pipeline’s help still read “This is the autogenerated help topic for this object. Developers: override the HtmlHelp_Source() function in the base class to provide custom help.” This does not help. And the Grasshopper Primer 2nd Ed. was written for GH 0.60007.
Grasshopper is fundamentally a 2D program:
I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen? Pretty much every 3D program in existence has this. I’m sure I can probably figure out how to deconstruct the breps, join the curves, loft, trim, and so forth. But does writing an algorithm to do what all other 3D programs do with a dialog box seem reasonable? I'm sure if you go command by command you'll find a ton on such things.
If you look at the vast majority of things done in GH, you'll note that they're mostly either flat or a fundamentally 2D pattern on a warped surface.
I've been working on a part that is a 3D voronoi trimmed to a 3D model. I've been trying to turn the trimmed voronoi into legitimate geometry for over a month without success.
http://www.grasshopper3d.com/profiles/blogs/question-voronoi-3d-continued
I’ve researched it enough to have found many others have had the exact same problem and have not solved it. It’s really not that conceptually difficult. But GH lacks the tools.
Make screen organization easier:
I have a touch of OCD, and I like my GH layout to flow neatly. Allow input/output nodes to be re-ordered. This will allow a reduction in crossed wires. Make the wire positions a bit more editable. I sometimes use a geometry component as a wire anchor to clean things up. Being able to grab a wire and pull it out of the way would be kinda nice.
I think GH has some awesome abilities. I also think accessing those abilities could be significantly easier.
~p…
re are major changes and enhancements.
HONEYBEE
More Flexible Workflow - Many small modifications were made to support a more flexible workflow, such as the ability to separate a zone created with masses2Zones into editable HBSrfs that can be recombined. For the energy components, it is now possible to plug custom constructions directly into the components that set the zone constructions without writing them first into the library. For the daylighting components it is now possible to change all of the materials of specific surface types at once.
Support for Complex Geometry - Many small bugs for complex geometry have been fixed including the ability to import energy results correctly for curved NURBS surfaces as well as unconventional window configurations. Also, the intersectMasses component now almost always succeeds in splitting all of the surfaces of adjacent zones, no matter how complex the intersection is.
Automatic Download Issues Fixed - Many users who faced issues with not having “gendaymtx.exe” or who had trouble syncing with our github know that we faced an issue with automatic background downloads.
Air Walls - Honeybee EnergyPlus models now officially support air walls (or virtual partitions) in a basic implementation. Now, any time that you use the air wall construction or set a surface type to “air wall,” the air between adjacent zones will be automatically mixed. At present, this mixing is just a constant flow based on the surface area between zones connected by air walls multiplied by an adjustable “flow factor.” It is important to stress that this basic air mixing is not with the EnergyPlus Airflow Network, although the groundwork laid in this release will eventually allow for the implementation of the Airflow Network in future releases. As such, this present air mixing is only suitable for multi-zone conditions where there is not significant buoyancy-driven flow between zones.
Natural Ventilation - To go along with the new potential introduced by air walls, there has been a basic implementation of EnergyPlus’s natural ventilation objects in a new component called “Set EP Airflow”. The current setup allows for three possible types of natural ventilation: 1) natural ventilation through windows (with auto-calculated flow based on window area, outdoor wind speed/direction, and stack effects), 2) custom wind and stack objects that can be used to model things such as chimneys off of single zones, and 3) constant, fan-driven natural ventilation.
Additional Thermal Mass - The capability to add additional thermal mass to zones has been added. This is useful for factoring in the mass of indoor furniture or heavy interior objects such as chimneys.
New Utility Components - Abraham has added a couple of useful components to help calculate lighting loads based on bulb types and target lighting levels as well as a converter from ACH to the m3/s-m2 that the other HB components accept. Along this vein, there is also a component for adding in the resistance of Air Films to HB constructions.
Improved and Editable Ideal Air Loads System - The EnergyPlus Ideal Air System now goes through an automatic sizing period at the start of the simulation based on the extreme weeks of the weather file. Furthermore, the ability to adjust many of the parameters of the ideal air loads system have been added with a new “Set Ideal Air Loads Parameters” component. The component allows you to add in heat recovery, air side economizers and demand-controlled ventilation.
OpenStudio Export Update - The OpenStudio workflow is still largely under development but this release includes a version with a working VAV and PTHP system template for those curious with experimenting. Note that not all of the new features available for the basic “Run Energy Simulation” component are available for the OpenStudio component (such as air walls, natural ventilation, or additional thermal mass).
Microclimate/Indoor Comfort Maps - Blossoming from initial experiments with the radiant temperature map, a workflow for looking into sub-zone microclimate and indoor comfort has been initiated. All components for this are presently under the Honeybee WIP tab but, over the next month, they will be completing their development phase and moving into the rest of the tabs. If you are interested in testing when they are ready, please let Chris know. For a teaser video of the intended capabilities, see this video: (https://www.youtube.com/watch?v=fNylb42FPIc&list=UUc6HWbF4UtdKdjbZ2tvwiCQ)
LADYBUG
Monthly Bar Chart - After much demand from multiple parties, a new component to create monthly bar and line charts has been added. The component is particularly useful for plotting the outputs of the “Average Data” component like monthly EPW data or averaged monthly-per hour data. It also supports daily data and any type of Energy simulation results.
Wind Profile - To go along with the new capabilities of natural ventilation in Honeybee, Ladybug now has a fully fleshed-out Wind Profile component that allows you to visualize how wind speed changes with height in relation to your building geometry. The component is geared to understanding the conditions of prevailing wind and will be useful in the future for setting up CFD models. Credit goes to Djordje Spasic for adding in all of the new capabilities. In a similar vein, the appearance of the wind rose has also been improved thanks to suggestions from Alejandra Menchaca.
Faster Solar Adjusted Temperature - Thanks to the SolarCal method from the Center for the Built Environment at UC Berkeley (http://escholarship.org/uc/item/89m1h2dg), the solar adjusted temperature component now includes an option for a much faster calculation that produces results that are very close to those originally obtained with the genCumSky component. Instead of using the cumulative sky, the component can now accept the direct and diffuse radiation from the ImportEPW component. Over a whole year, this essentially takes a calculation that used to be a half-hour and shrinks it down to 10 seconds. Thanks again to those at UC Berkeley for keeping their work open source!
Instructions - Last but not the least, [It took me almost two years to understand this but finally] we have a text file that describes the installation step by step and is way easier to modify than a video. You can find it in the zip file. Credit goes to Chris!
We also want to welcome Anton, Patrick and Sandeep to the team. Anton has kicked off his development by working on a component to import and visualize epw ground temperature data and he will be continuing to develop components to bring in reliable precipitation data to Ladybug. With this basis, he will continue to implement Honeybee components for ground heat storage, earth tubes, rain collection and hot water systems. Patrick and Sandeep are working on integration of Honeybee to Energy Performance Calculator.
As always let us know your comments and suggestions.
Enjoy!…
but rather than keep everyone waiting, I've decided to share some as they become ready.
This also has the advantage that questions about components can be more easily grouped under the relevant post - so please do add any questions / comments / bugs / suggestions about these examples below.
So today I am posting some examples of the mesh utilities that come with the new release.
While these are not directly physics based, many of the forces and types of relaxation in Kangaroo are designed to work with meshes, and in the process of development I've ended up adding a number of simple utilities to make working with them a little easier.
I recommend also installing Weaverbird which has many more subdivision functions and other useful tools for working with meshes in Grasshopper. Also Plankton, Turtle, MeshEdit and Starling extend these possibilities still further.
Diagonalize
This component replaces every edge of a mesh with a new face. The new faces will always be quads, except for along the boundaries, where they will be triangles. It can be used to easily create diagrids. The input mesh can contain any mix of triangles and quads.
When treating the edges of a quad mesh as springs, diagonalizing it will often significantly change its physical behaviour. If you are trying to planarize a quad mesh, diagonalizing may sometimes allow you to stay closer to a target shape if it matches the curvature directions better.
diagonalize.gh
Checkerboard
This component assigns the faces of a mesh into a checkerboard pattern. The output is a list of 1s and 0s (which could represent black/white or true/false) which can be used to dispatch the faces into 2 lists, where no pair of adjacent faces have the same colour.
One nice application I found for this is applying alternating clockwise and counter-clockwise rotations as shown below. Also, on occasion you may want to planarize a quad mesh, but have some constraints on the shape and grid that prevent this, and triangulating only alternating quads to give a hybrid quad/tri mesh can sometimes be a good compromise, allowing a bit more freedom.
Note - Not all meshes can be assigned a checkerboard pattern!
As a simple example, take a mesh with 3 quads around one vertex - If we assign one black face, then both the neighbouring faces should be white, but then we have 2 white faces adjacent to one another, which violates the checkerboard condition.
Generally, we can say that if a mesh has any internal vertex with an odd number of faces around it, then we cannot apply a consistent checkerboard pattern to it (although not having any odd valence vertices is not in itself an absolute guarantee that a mesh is 'checkerboardable').
checkerboard.gh
WarpWeft
This sorts the edges of a quad mesh into 2 lists of line segments, which are like the warp and weft directions of a fabric. They can also be seen as a sort of mesh equivalent to the u and v isocurves on a NURBS surface.
This can be useful if you want to control the shape of a tension structure, because it allows you to assign different stiffnesses in the 2 directions.
As with the checkerboard component, not all meshes can be consistently assigned warp/weft directions. It follows a similar rule - all internal vertices should have an even number of adjacent faces. With a bit of care, it is usually possible to model the initial mesh in such a way as to allow this.
This component also has an output telling us whether or not each line is on a boundary of the mesh, as we will often want to treat these differently.
Same mesh relaxed with different warp/weft stiffness:
warpweft.gh
MeshCorners
This one is hopefully fairly self explanatory. In many simulations we want to anchor the corner points of a mesh. This saves us having to pick them manually in Rhino.
It works on quad meshes, and looks around the boundary vertices for any which do not have exactly 3 connected edges.
corners.gh
That's all for now. Coming soon - a "mesh tools 2" post explaining more of the components.…
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
guages I'd recommend all use the RhinoCommon SDK and thus all have access to the same functionality.
How long would it take me to understand and write my own code?
If you already know how to program, it probably won't take too long. If you're past the hurdle of what it means to declare and assign variables, how conditionals and loops work and what scope is, you've already rounded the hardest corner.
Is it even worth it?
That really depends. "Learn programming" is clearly not blanket good advice. Most people out there do not have to learn programming to be happy with their lives and successful in their careers. For some people it can make a small difference, and for a few people it can make a huge difference. If you feel you're in the 'some' category then this is indeed a question you have to answer. Note that the investment for learning programming is a continuous process. Unless you keep up your skills and learn about new stuff that becomes available, you'll lose the ability to write successful code over time.
Where do I start?
Step 1 is to answer the previous question. It is unlikely that anyone besides yourself can answer it, but you can start by making a list of things you do manually now that may be programmable. Then make a list of the things you are unable to do now but which you might be able to do with programming. If while looking at these lists your reaction is: "meh", the answer is probably no.
Step 2 is to pick a language. This is again a very personal thing; there's no wrong answer, because there's no right answer.
Step 3 is to start learning this language. My experience is that the best way to learn a programming language is to try and solve a real problem that you understand very well. If the problem statement is nebulous or poorly understood, you'll be learning two things and that's a recipe for unnecessary frustration.
Here are my thoughts on language:
Python: I don't use Python myself, I can sort of read it while moving my lips. I don't particularly like Python though. The indentation sensitiveness stresses me out, and I find the lack of type-safety disturbing. However it is a good language for mathematical/scientific programs. There are lots of additional code libraries you can easily import that will ease the development of mathematically intense algorithms.
C#: I like C# very much, but it does suffer from geekerosis. A lot of the keywords used in the language are not self-explanatory (abstract, sealed, virtual). For me this is no longer a problem as I've memorised what they all mean. C# is designed to be an efficient language to write, rather than an easy one to learn.
The great thing about C# though is that there's a huge amount of material out there for learning it. It is one of the most popular, mature and modern languages you can hope to pick.
VB: I learned VBScript as my first language, and then moved on to VB5, VB6 and VB.NET. It is somewhat more friendly than C#, and functionally it is almost identical. The switch from VB to C# is reasonably low-threshold and there are excellent tools for translating VB code to C# and vice versa.
Since you already know some Python, it probably makes the most sense to continue on that path. If you want to switch, C# is more like Python than VB, so C# would be my next suggestion.
As for where to get information... you have 4 major options when developing code for Rhino.
If it's a question about the language itself, StackOverflow is a great resource. It can be a pretty hostile place for beginner questions, but I find that mostly the questions I'm asking have been asked already and the answers on SO tend to be good. In fact usually when I google my questions, the first few hits are always SO posts.
If it's a question about the Rhino SDK or Grasshopper, you can ask it either on the GH forums (where we are now), or on Discourse. We're not as quick on the draw as SO, but we do know about Rhino.
If you're looking for a basic explanation of what a keyword or a type is for, perhaps with an example, MSDN is the best first choice. In fact if you google the name a of a .NET type, the first hit is almost always an MSDN page.…
Added by David Rutten at 2:03pm on December 3, 2014
umbrella of Urban Heat Island (UHI) and I am going to try to separate them out in order to give you a sense of the current capabilities in LB+HB.
1) UHI as defined as a recorded elevated air temperature in an urban area:
If you have access to epw files for both an urban area and a rural area, you can use Ladybug to visualize and deeply explore the differences between the two weather files. Ladybug is primarily a tool for weather file visualization and analysis and it can be very helpful for understanding the consequences of UHI on strategies for buildings or on comfort. This said, if you do not have both rural and urban recorded weather data or you want to generate your own weather files based on criteria about urban areas (as it sounds like you want to do), this definition might not be so helpful.
2) UHI defined by air elevated air temperature but viewed as a computer model-able phenomenon resulting primarily from urban canyon geometry, building materials, and (to a lesser degree) anthropogenic heat:
This definition seems to fit more with they type of thing that you are looking for but it is unfortunately very difficult and computationally intensive such that we do not currently have anything within Ladybug to do this right now. I can say that the state-of-the art for this type of modeling is an application called Town Energy Budget (TEB) and this is what all of the advanced UHI researches that I know use (http://www.cnrm.meteo.fr/surfex/spip.php?article7). Unfortunately for those trying to use it in professional practice, it can take a while to get comfortable with it and it currently runs exclusively on Linux (this does mean that it is open source, though, and that you can really get deep into the assumptions of the model). A couple years ago, a peer of mine translated almost all of TEB into Matlab language making it possible to run it on Windows if you have Matlab. He wrapped everything together into a tool called the Urban Weather Generator (UWG), which can take an epw file of a rural area and warp it to an urban area based on inputs that you give of building height, materials, vegetation, anthropogenic heat, etc. I would recommend looking into this for your project, although, bear in mind that is it not open source like the original TEB tool and that you may need to get a (very expensive) copy of MATLAB (http://urbanmicroclimate.scripts.mit.edu/uwg.php).
3) UHI as defined by a thermal satellite image of an urban area depicting an elevated average radiant environment that reaches a maximum a the city center and changes by land use:
This is the definition of UHI that I am most familiar with and was the basis of much of my past research. I feel that it is also a definition of UHI that is a bit more in line with where a lot of contemporary UHI research is headed, which is away from the notion of UHI as a macro-scale meteorological phenomena that is averaged as an air temperature over a huge area towards one that accepts that different land uses have different microclimates and (importantly) different radiant environments. While the air temperature difference between urban and rural areas usually does not change more than 1-4 C, the radiant environment can be very different (on the order of 10-15 C differences). The best way to understand UHI in this context is with Thermal satellite images, for which there is ha huge database of publicly available data on NASA's glovis website (http://glovis.usgs.gov/) or their ECHO website (http://reverb.echo.nasa.gov/reverb/#utf8=%E2%9C%93&spatial_map=satellite&spatial_type=rectangle). I tend to use thermal data from LANDSAT 5-8 and ASTER satellites in my research. Unfortunately, there is a lot f bad data with a lot of cloud cover mixed in with the really good stuff and it can take some time to find good images. Also, there aren't too many programs that read the GeoTiff file format that you download the data as. I know that ArcGIS will read it, a program called ENVI will read it (I think that the open source QGIS can also red it). I have plans to write a set of components to bring this type of data into Rhino and GH (I may get to it a few months down the line).
4) UHI as a computer model-able notion of "Urban Microclimate" with consideration of local differences and the local radiant environment:
This is where a lot of my research has lead and, thankfully, is an area that Honeybee can help you out a lot with. EnergyPlus simulations can output information on outside building surface temperatures and these can be very helpful in helping get a sense of the radiant environment around individual buildings. Right now, I am focusing just on using this data to fully model the indoor environments of buildings as you see in this video:
https://www.youtube.com/watch?v=fNylb42FPIc&list=UUc6HWbF4UtdKdjbZ2tvwiCQ
I have plans to move this methodology to the outdoors once I complete this initial application to the indoors. For now, you can use the "Surface result reader" and the "color surfaces based on EP result" components to get a sense of variation in the outside temperature of your buildings.
I hope that this helped,
-Chris
…