EnergyPlus Zone Thresholds" to be larger than the maxIndoorTempForNatVent_ (for cooling Setpoints) and smaller than the minIndoorTempForNatVent_ (for heating Setpoint). It's usually a good idea to leave at least 1 degree C buffer in between the maxIndoorTempForNatVent_ and the cooling setpoint. Otherwise, you get a rapidly cycling phenomena where the windows shut because it's too hot, AC turns on, zone temperature drops, windows open, and zone temperature goes up. This whole ordeal wastes a lot of cooling energy.
Alternatively, you can get creative with the nat vent schedule and HVAC Availability schedule to ensure that you never have nat vent and AC periods overlapping but I would recommend getting the hang of the method above before trying this.
-Chris…
s not related to natural ventilation. You connected the geometry of the Ladybug_North component to the north_ input of the run simulation component. If you read the description of the _north input, it is supposed to be either a vector or a number representing the degrees to rotate the model. It is not the compass rose geometry that you get from the Ladybug_North Component.
Also, when setting up a hybrid nat vent and actively cooled building, you should leave a gap of a degree to two between the indoor temperature at which the windows close and the indoor temperature when the cooling system turns on. Otherwise, you get the AC cooling the building to the point that the windows open and suddenly you loose all of the cool air in your space, forcing the AC to come back on 10 minutes later. Something like this would work a lot better:
-Chris…
D to be 3/4 of the distance from C as C is to A.Then Point E = (Distance CD)3/4Point F = (Distance DE)3/4I imagine that I need some sort of loop to iterate the variable.My Eval module is y=y(.75) but that only makes each line 3/4 of the length of the original line AC.What sort of modules can I add to store the variable for x number of divided distances needed for the line?…
and Grasshopper. Recently I tried doing some test project just to see what can I do. My target is to design a small house for an atom family. Though as you might think - it'll be a parametric one. And I encountered exactly what's in the title. So here it goes: 1. Something is wrong with the measuring units in the complex profiles. I met this problem while making I-beam. In ArchiCAD it had 127/76 mm while in Grasshopper i had 127000/76200mm so a little bigger. 2. I'm unable to turn off the preview. I mean when I delete something in Grasshopper/Rhino it still exists in ArchiCAD. I have to unlock it and then delete it. 3. Coordinates for points seem broken. They have to be multiplied 1000 times to match. 4. Now one of the most important. Is it possible to somehow SHOW Grasshopper where are already made in ArchiCAD objects. Even if they'll remain still. For example I want to make a parametrical roof. Do I have to model whole building from scratch in Grasshopper or is there some fast way to "import" existing scene so I can limit my work with Grasshopper only to parametrical one. 5. Is it possible to make "points" as controlling points in AC? Like, if I'd like to make a beam in a desired place which I will mark by that point and then I will "show" Grasshopper that point and tell it to make an object in there so I can control it within grasshopper. I tried ti do this using AC Control Point but when I click "Send changes" button, Grasshopper and Rhino crush immediately. It only happens then, with control points. 6. It seems that "move" component won't work with "2D curve" component connected directly. It is possible that some of those problems are outdated. I was playing around in Grasshopper a few months ago, before summer break, but now I plan to try something new and it would be nice to know what to do. I appreciate any answer to any of those questions. Please help, you guys, are my only hope. Thanks in advance! Karol…
hopper) and High Definition visualizations (V-Ray) and exploring its scientific innovations supporting the users' platform philosophical ideas.
SESSIONS: 5 sessions of 8 hours (40 hours total)
E-MAIL: educacion@chconsultores.net
REGISTRATION: (55) 56 62 57 93
TECHNICAL INFO: 044 (55) 31 22 71 83
INSTRUCTORS: Have past experience working at Gehry Technologies, and participated at studios with Eric Owen Moss and Tom Wiscombe at SCI-Arc (Southern California Institute of Architecture).
Day 1: Introduction to MAYA tools, 3D exercise start.
Day 2: Continue 3D exercise.
Day 3: Original 3D architecture design.
Day 4: Grasshopper optional application on 3D architecture design.
Day 5: V-Ray Application on 3D architecture design.
30 DAY TRIAL SOFTWARE DOWNLOAD:MAYA 2012: http://www.autodesk.com/products/autodesk-maya/free-triaRHINO 4: http://s3.amazonaws.com/files.na.mcneel.com/rhino/4.0/2011-02-11/eval/rh40eval_en_20110211.exe3DS MAX 2010: http://www.autodesk.com/products/autodesk-3ds-max/free-trialVRAY FOR 3DS MAX: http://www.vray.com/vray_for_3ds_max/demo/thankyou.shtml#thankyouPHOTOSHOP e ILLUSTRATOR: https://creative.adobe.com/apps?trial=PHSP&promoid=JZXPS
www.helenico.edu.mx
www.scifi-architecture.com/#!workshops/c1wua
LIKE US ON: www.facebook.com/scifiarchitecture
…
onsidered period.
Even if the end of July for the mediterranean climate is not the best period to perform an adaptive comfort analysis (it's just a pretest to define a LB model) I want to refine the Adaptive comfort Chart (AC) by changing the external air temperature data imported from the .epw file with that of monitored data as reported here below:
Where the monitored ext air temperature are in this form (green panel below):
I have used the comfortPar component to set the following parameters:
Adaptive chart as defined by EN 15251
90% of occupants comfortable
the prevailing outdoor temperature from a weighted running mean of the last week
fully conditioned space (even if it is not properly in line with AC as already discussed)
The question is this: the AC component could correctly apply the code below if there is only a list of external temperature data for a restricted period (without indication about the limits of this period) and not for an entire year?
else: #Calculate a running mean temperature. alpha = 0.8 divisor = 1 + alpha + math.pow(alpha,2) + math.pow(alpha,3) + math.pow(alpha,4) + math.pow(alpha,5) dividend = (sum(_prevailingOutdoorTemp[-24:-1] + [_prevailingOutdoorTemp[-1]])/24) + (alpha*(sum(_prevailingOutdoorTemp[-48:-24])/24)) + (math.pow(alpha,2)*(sum(_prevailingOutdoorTemp[-72:-48])/24)) + (math.pow(alpha,3)*(sum(_prevailingOutdoorTemp[-96:-72])/24)) + (math.pow(alpha,4)*(sum(_prevailingOutdoorTemp[-120:-96])/24)) + (math.pow(alpha,5)*(sum(_prevailingOutdoorTemp[-144:-120])/24)) startingTemp = dividend/divisor if startingTemp < 10: coldTimes.append(0) outdoorTemp = _prevailingOutdoorTemp[7:] startingMean = sum(outdoorTemp[:24])/24 dailyRunMeans = [startingTemp] dailyMeans = [startingMean] prevailTemp.extend(duplicateData([startingTemp], 24)) startHour = 24
…