but rather than keep everyone waiting, I've decided to share some as they become ready.
This also has the advantage that questions about components can be more easily grouped under the relevant post - so please do add any questions / comments / bugs / suggestions about these examples below.
So today I am posting some examples of the mesh utilities that come with the new release.
While these are not directly physics based, many of the forces and types of relaxation in Kangaroo are designed to work with meshes, and in the process of development I've ended up adding a number of simple utilities to make working with them a little easier.
I recommend also installing Weaverbird which has many more subdivision functions and other useful tools for working with meshes in Grasshopper. Also Plankton, Turtle, MeshEdit and Starling extend these possibilities still further.
Diagonalize
This component replaces every edge of a mesh with a new face. The new faces will always be quads, except for along the boundaries, where they will be triangles. It can be used to easily create diagrids. The input mesh can contain any mix of triangles and quads.
When treating the edges of a quad mesh as springs, diagonalizing it will often significantly change its physical behaviour. If you are trying to planarize a quad mesh, diagonalizing may sometimes allow you to stay closer to a target shape if it matches the curvature directions better.
diagonalize.gh
Checkerboard
This component assigns the faces of a mesh into a checkerboard pattern. The output is a list of 1s and 0s (which could represent black/white or true/false) which can be used to dispatch the faces into 2 lists, where no pair of adjacent faces have the same colour.
One nice application I found for this is applying alternating clockwise and counter-clockwise rotations as shown below. Also, on occasion you may want to planarize a quad mesh, but have some constraints on the shape and grid that prevent this, and triangulating only alternating quads to give a hybrid quad/tri mesh can sometimes be a good compromise, allowing a bit more freedom.
Note - Not all meshes can be assigned a checkerboard pattern!
As a simple example, take a mesh with 3 quads around one vertex - If we assign one black face, then both the neighbouring faces should be white, but then we have 2 white faces adjacent to one another, which violates the checkerboard condition.
Generally, we can say that if a mesh has any internal vertex with an odd number of faces around it, then we cannot apply a consistent checkerboard pattern to it (although not having any odd valence vertices is not in itself an absolute guarantee that a mesh is 'checkerboardable').
checkerboard.gh
WarpWeft
This sorts the edges of a quad mesh into 2 lists of line segments, which are like the warp and weft directions of a fabric. They can also be seen as a sort of mesh equivalent to the u and v isocurves on a NURBS surface.
This can be useful if you want to control the shape of a tension structure, because it allows you to assign different stiffnesses in the 2 directions.
As with the checkerboard component, not all meshes can be consistently assigned warp/weft directions. It follows a similar rule - all internal vertices should have an even number of adjacent faces. With a bit of care, it is usually possible to model the initial mesh in such a way as to allow this.
This component also has an output telling us whether or not each line is on a boundary of the mesh, as we will often want to treat these differently.
Same mesh relaxed with different warp/weft stiffness:
warpweft.gh
MeshCorners
This one is hopefully fairly self explanatory. In many simulations we want to anchor the corner points of a mesh. This saves us having to pick them manually in Rhino.
It works on quad meshes, and looks around the boundary vertices for any which do not have exactly 3 connected edges.
corners.gh
That's all for now. Coming soon - a "mesh tools 2" post explaining more of the components.…
ther math and logic. i can usually conceptualise what i want to do and cobble some semi working thing together but don't know which components to use and how to patch it. so i'm super happy to have someone who knows what he's doing to find this interesting.
and i'm glad you mention the fanned frets again, there is one input parameter that's still missing for the multiscale frets to be fully parametric, it's the angle of the nut or which fret should be straight. it depends a bit on personal preferences and playing posture what is more comfortable. so being able to adjust this easily would be cool. again i have no idea how the maths for that work or if you can just rotate each fret the same amount around it's middle point. The input either as fret number (for the straight fret) or as a simple slider from bridge to nut should do as input setting.
Here are the two extremes and the middle ground:
i've been thinkin today while analysing your patches and cleaning up my mess what exactly the monster should do.
Here are the input parameters needed, i think it's the complete list
scale length low E string
scale length high e string
fret angle/straight fret
string width at nut
string width at bridge
number of frets
fretboard overhang at nut (distance from string to fretboard bounds)
fretboard overhang at last fret
string gauges
string tensions
fretboard radius at nut (for compound radius fretboard radius at bridge is calculated with the stewmac formula)
fretwire crown width
fretwire crown height
action height at nut (distance between bottom of string and fretwire crown top)
action height at last fret
pickup 1 neck position
pickup 2 middle position
pickup 3 bridge position
nut width
the pickup positions should be used to draw circles for the magnet poles on each string so they are perfectly aligned and can be used for the pickup flatwork construction. ideally they would need a rotation control aligning the center line of the pickup so it's somewher between the last fret angle and bridge angle. personally i do this visually depending on the design i'm looking for, some people have huge theories on pickup positioning but personally i don't believe in it.
that should result in everything needed to quickly generate all the necessary construction curves or geometry for nut/fingerboard/frets/pickups. this is the core of what makes a guitar work, the more precise this dynamic system is the better the guitar plays and sounds.
i posted another thread trying to understand how i could use datasets form spreadsheets,databse, csv to organize the input parameters. What would make sense for the strings for example is hook into a spreadsheet with the different string sets, i attached one for the d'Addario NYXL string line which basically covers all combos that make sense.
The string tension is an interesting one, and implmenting it would sure be overkill albeit super interesting to try. it should be possible to extrapolate from the scale length of each string what the tension for a given string gauge of that string would be so that you could say 'i want a fully balanced set' or 'heavy top light bottom) and it would calculate which SKU from d'addario would best match the required tension. All the strings listed in the spreadsheet are available as single strings to buy.
i'm trying to reorganize everything which helps me understand it. i just discovered the 'hidden wires' feature which is great since once i understood what a certain block does or have finished one of my own, i can get the wires out of the way to carry on undistracted. a bit risky to hide so many wires but it makes it so much easier not to get completely lost :-)
btw, the 'fanned fret' term is trademarked, some guy tried to patent it in the 80's which is a bit silly since it has been done for centuries. there is a level of sophistication above this as well, check out http://www.truetemperament.com/ and that really is something else. it really is astounding how superior the tuning is on those wigglefrets, the problem is that it's rather awkward for string bending and also you can't easily recrown or level the frets when they are used. …
nd the challenge "Building the Invisible: Informing Digital Design with Real World Data". Information about each Workshop Cluster can be found here:
Cyber GardensUse the ForceUrban FeedsSuspended DreamsInteracting with the CityAgent ConstructionAuthored SensingPerforming SkinsResponsive Acoustic SurfacingHybrid Space Structure Typologies
The SmartGeometry 2011 Workshop will take place at CITA http://cita.karch.dk/
Applications to attend the SmartGeometry 2011 Workshop in Copenhagen will close on 31st January 2011. General Conference registration will open within 1 month.
We hope to see you there!
****************************************************
Workshop 28th-31st March
Shop Talk 1 April
Symposium 2 April
Reception 2 April
These events follow the highly successful previous SG events in Barcelona 2010, San Francisco 2009, Munich 2008, New York 2007, Cambridge/London, UK 2006 and multiple preceding events.
Click here for more info...
This year's Challenge is entitled:BUILDING THE INVISIBLEInforming Digital Design with Real World Data
THE PREMISEVast streams of data offer a rich resource for designers. By incorporating external information into our design processes the autonomy of the design is challenged. User data, energy calculations, embedded sensing, material and structural simulation, human behaviour and perception, particle flows and force fields allows design to be situated and responsive. From the simulation of megacities to the solid modelling of material systems, design has the potential to be informed by the real. Design sits not separate from is environment but inhabits an ecological system, open, dynamic and interdependent, diverse, partially self-organising, adaptive, and fragile. Across scale and within time we now have the chance to instil architecture with an immanent intelligence creating new relationships between the user, the built and its ecosphere.THE OPPORTUNITYSystems theorists suggest that data is only a raw material. It can be differentiated from information, knowledge and wisdom. Understanding is multi-levelled: understanding of relations, understanding of patterns, understanding of principles. As digital designers our challenge is in harnessing the power of computation to assist us in informing our design process. Computers help us collect, manage and analyse the environment and inform us about an abundance of data. Our challenge is to use these inputs in a meaningful way to help us make better informed design decisions.THE AIMSG 2011 explores how the incorporation of real world data challenges existing design thinking. The SG 2011 workshop aim is to create physical prototypes of design systems to be exhibited in the SG2011 exhibition.
The SmartGeometry Group is a not-for-profit educational organization dedicated to the use of computational tools in architecture and engineering. SG brings professionals, academics, and industry together to explore the next generation of digital design. SG Workshops are non-platform specific, believing it is the methodology, not the tool, that matters.
…
Added by Shane Burger at 11:23am on January 6, 2011
looked at autodesk simulation cfd 2015 and was optimistic because it had an export plugin from revit, which i use anyway for material takeoffs and etc, but found that it did not take solar radiation into account. This was a downer because I have heard that solar radiation could effect indoor airflow - convection - as much as 50 percent at a time.
Then I searched again and found that Hyperworks, a software by altair technology can be coupled with a radiation software. So I went through the trouble of obtaining an educational license of Hyperworks. However, though some email exchange I have found that the coupling is a one-way. The radiation analysis software was used, I think, for understanding the solar loading for a SOM project called church of light.
The support guy said : "Unfortunately our coupling with Hyperworks is really a one way coupling. We can accept H coefficients from their software in RadTherm, but they will not read in our wall temps. That said, it still can be a useful coupling in the sense that you can run the analysis in Hyperworks, send H coefficients to RadTherm, and run the analysis to better understand radiation and conduction. Most importantly, that analysis can be done for longer transient analysis, but will require much less compute time and resources."
Not only did I not understand what he means by the H coefficients, my wanting to get a CFD understanding coupled with solar radiation was again, unsatisfied. In the mean while I had to finish a presentation so I haven't had the time to try to get some result on the natural ventilation. I would probably need to look into how their solutions work before I can understand if their software would "do the job"
Thank you for letting me know about your work on this. I downloaded the Honeybee_Set EP Natural Ventilation component and made sure that it is allowed, but it does not show up in grasshopper.
You pointed out that "The component (and the corresponding equation) is mostly meant for cases where you have zones with windows that are NOT connected by an air wall (or a larger airflow network)." I wondered if you are suggesting it would be a code violation for zones to be connected by an air wall for fire safety reasons. It would be a violation I guess, like not putting an fiber insulation or some kind of smoke stop between Spandrel panels and the edge of a floor plate would be a code violation for a typical office building.
There is a project by kevin daly architects where you can see a section drawing with what seems like a cfd analysis (could be an illustration)
it was my initial visualization/simulation goals were for a facade design I am working on
1) an average air velocity across a zone at noon, for example, if a passive design strategy like this was used. for this I am guessing cfd is not entirely necessary. probably means that it could be used earlier in a design process, too. This would be more about user comfort.
2) at a later phase, like in detailing facade components, if airflow is indeed as expected for a zone that is connected to an air wall / chimney like feature (and to see if there is a proper mixing of air)
3) and a projection of energy savings, of course.
After seeing a video of simulation cfd I was optimistic, but like I said sim cfd does not take account of solar loading. I think I would probably go ahead start with one zone with sim cfd first, try three zones stacked on top of each other, then try hyperworks and try to factor in solar radiation.
For analyzing multiple zones on different levels, being able to add a chimney would be especially useful, I think. Having said that, I don't have a lot of experience of using honeybee except for the daylight component so it would take some time for me to understand the components.
I hope some of the information here is useful for you. after all, both sim cfd and hyperworks are commercial softwares and somewhat different than the e plus project you are working on, I guess but still trying to address a similar problem.
so.. in cased you missed it I was asking I downloaded the Honeybee_Set EP Natural Ventilation component and made sure that it is allowed and placed in the user object foler, but it does not show up in grasshopper. what could be the reason?
…
ger work.
Be aware, this release breaks file-forwards compatibility. You will not be able to open gh and ghx files saved with 0.8.0050 on previous versions, though of course you should be able to open old files without problems. If this is not the case, please yell loudly.
If you're having trouble loading Grasshopper, note that you must have the latest Microsoft C++ Runtimes installed on your machine. They can be downloaded from the microsoft website.
The new release can be downloaded from the usual location.
Here's a list of changes, additions and fixes since 0.8.0013:
File format forwards compatibility has been broken. You will not be able to open files saved with 0.8.0050 on earlier versions.
This release contains many breaking changes and GHA libraries compiled for older version may not work anymore.
Grasshopper Binary files (*.gh) are now saved as compressed data.
Grasshopper Binary files (*.gh) are now the default format.
Support for ancient versions of the Text Panel (still called Post-It from back then) has been removed.
Support for ancient versions of the Path Mapper (still called Path Lexer from back then) has been removed.
Placeholders for ancient versions of the Graph Mapper have been removed.
Gradient input parameters now show state tag icons (Reversed, Flatten etc.).
Geometry Cache name changes are now updated on every key press.
Geometry Cache name changes can now be cancelled with Escape.
Geometry Cache name changes can now be undone.
Mesh|Mesh intersection component now uses a different algorithm. The old behaviour is still available from the component menu.
Warning and Error balloons are now drawn as part of a Canvas Widget and will no longer show up in the Hi-Res image export.
Galapagos now accepts multiple fitness values. The true fitness will be the average of the collection.
Galapagos wires are drawn much fainter when the Galapagos object is unselected.
Medium fast redraw mode in Galapagos now immediately redraws instead of at the end of each generation.
Redesigned all Grasshopper file format icons and added larger size icons for high-dpi explorer views.
Redesigned the Most Recently Used files menu, it should now display much quicker.
Compass widget has been rewritten in an attempt to increase display performance.
Added preferences section for Compass widget.
Added preferences section for Align widget.
Added preferences section for Default Preview colours.
Added preferences section for Document Preview colours.
Added preferences section for the Most Recently Used files menu.
The Area component now accepts Breps, Meshes and Planar Closed Curves.
The Area Centroid component now accepts Breps, Meshes and Planar Closed Curves.
The Volume component now accepts Breps and Meshes.
The Volume Centroid component now accepts Breps and Meshes.
Added Merge Faces component (Surface.Util panel).
Added a Mesh Smooth component (Mesh.Util panel).
Added a Curve Seam component (Curve.Util panel).
Added Interpolate Curve With Tangents component (Curve.Spline dropdown).
Added GrasshopperFolders command to open Settings, Components and UserObject folders without loading the core plugin.
The window that reports on certain Loading Errors now has a Copy button.
Added Simplify post-process filter to parameters (in addition to Reverse, Flatten and Graft).
Parameter post processes (Reverse, Flatten, Graft & Simplify) can now also be assigned to output parameters.
Version History window now has formatting (not happy with this, I'm working on something better).
The Process Info window is gone.
Main menu has been redesigned.
Canvas toolbar has been redesigned.
Canvas context menu has been replaced by a Radial Menu.
Canvas now has a radial menu which will pop up on Middle Mouse Button clicks.
It's possible to switch between Radial and Legacy menus in the Preferences (Interface.Canvas section).
'Save As Copy' feature has been replaced by 'Save Backup' which is a GUI-less save including date+time stamp.
Added a 'Show in Folder' item to the File menu.
AutoSave settings are no longer available from the File menu, you now need to use the Preferences.
Selection shifts now also modify the view so you can use Ctrl+Left and Ctrl+Right to navigate up and downstream.
Mesh Edge display can now be toggled with Ctrl+M.
Preview modes now have shortcuts (Ctrl+1 = no preview, Ctrl+2 = wireframe, Ctrl+3 = shaded).
Solution States now have a default name.
Data Viewer window now responds to all required events.
Data Viewer window can now handle input and output parameters as well.
Canvas Navigation pane can now be dragged using the icon in the upper left corner.
The Persistent Data Editor has been redesigned.
It's now possible to select multiple items in the Persistent Data Editor list and edit their properties.
It's now possible to drag multiple items at the same time in the Persistent Data Editor list.
Item addition to the Persistent Data Editor is much improved.
The Persistent Data Editor is now non-modal.
The Canvas would remain black upon maximizing the Rhino window, this is fixed.
Sliders would cause multiple updates under certain conditions, this is fixed.
Digit Scrollers would cause multiple updates under certain conditions, this is fixed.
Pipes were inside out. This is fixed.
The curve component would not adjust invalid nurbs degrees, this is fixed.
Curves referencing Brep edges failed to load, this is fixed.
Points referencing Brep edges failed to load, this is fixed.
Referenced dlls in the VB/C# components sometimes resulted in invalid imports statements, this is fixed.
Pasting geometry in Rhino would cause a recompute of the Grasshopper solution, this is fixed.
Importing a file into the Rhino document would cause a recompute of the Grasshopper solution, this is fixed.
Galapagos would trigger superfluous solutions, this is fixed.
Mesh Solid Difference had a wrong name and description, this is fixed.
Several menu items were not greyed out despite not being usable, this is fixed.
The position and size of the Grasshopper window failed to get stored on Rhino shutdown, this is fixed.
The Persistent Data Editor would crash on parameters that did not support data proxies, this is fixed.
I'll add some additional information regarding some of the new UI features in subsequent posts.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
re are major changes and enhancements.
HONEYBEE
More Flexible Workflow - Many small modifications were made to support a more flexible workflow, such as the ability to separate a zone created with masses2Zones into editable HBSrfs that can be recombined. For the energy components, it is now possible to plug custom constructions directly into the components that set the zone constructions without writing them first into the library. For the daylighting components it is now possible to change all of the materials of specific surface types at once.
Support for Complex Geometry - Many small bugs for complex geometry have been fixed including the ability to import energy results correctly for curved NURBS surfaces as well as unconventional window configurations. Also, the intersectMasses component now almost always succeeds in splitting all of the surfaces of adjacent zones, no matter how complex the intersection is.
Automatic Download Issues Fixed - Many users who faced issues with not having “gendaymtx.exe” or who had trouble syncing with our github know that we faced an issue with automatic background downloads.
Air Walls - Honeybee EnergyPlus models now officially support air walls (or virtual partitions) in a basic implementation. Now, any time that you use the air wall construction or set a surface type to “air wall,” the air between adjacent zones will be automatically mixed. At present, this mixing is just a constant flow based on the surface area between zones connected by air walls multiplied by an adjustable “flow factor.” It is important to stress that this basic air mixing is not with the EnergyPlus Airflow Network, although the groundwork laid in this release will eventually allow for the implementation of the Airflow Network in future releases. As such, this present air mixing is only suitable for multi-zone conditions where there is not significant buoyancy-driven flow between zones.
Natural Ventilation - To go along with the new potential introduced by air walls, there has been a basic implementation of EnergyPlus’s natural ventilation objects in a new component called “Set EP Airflow”. The current setup allows for three possible types of natural ventilation: 1) natural ventilation through windows (with auto-calculated flow based on window area, outdoor wind speed/direction, and stack effects), 2) custom wind and stack objects that can be used to model things such as chimneys off of single zones, and 3) constant, fan-driven natural ventilation.
Additional Thermal Mass - The capability to add additional thermal mass to zones has been added. This is useful for factoring in the mass of indoor furniture or heavy interior objects such as chimneys.
New Utility Components - Abraham has added a couple of useful components to help calculate lighting loads based on bulb types and target lighting levels as well as a converter from ACH to the m3/s-m2 that the other HB components accept. Along this vein, there is also a component for adding in the resistance of Air Films to HB constructions.
Improved and Editable Ideal Air Loads System - The EnergyPlus Ideal Air System now goes through an automatic sizing period at the start of the simulation based on the extreme weeks of the weather file. Furthermore, the ability to adjust many of the parameters of the ideal air loads system have been added with a new “Set Ideal Air Loads Parameters” component. The component allows you to add in heat recovery, air side economizers and demand-controlled ventilation.
OpenStudio Export Update - The OpenStudio workflow is still largely under development but this release includes a version with a working VAV and PTHP system template for those curious with experimenting. Note that not all of the new features available for the basic “Run Energy Simulation” component are available for the OpenStudio component (such as air walls, natural ventilation, or additional thermal mass).
Microclimate/Indoor Comfort Maps - Blossoming from initial experiments with the radiant temperature map, a workflow for looking into sub-zone microclimate and indoor comfort has been initiated. All components for this are presently under the Honeybee WIP tab but, over the next month, they will be completing their development phase and moving into the rest of the tabs. If you are interested in testing when they are ready, please let Chris know. For a teaser video of the intended capabilities, see this video: (https://www.youtube.com/watch?v=fNylb42FPIc&list=UUc6HWbF4UtdKdjbZ2tvwiCQ)
LADYBUG
Monthly Bar Chart - After much demand from multiple parties, a new component to create monthly bar and line charts has been added. The component is particularly useful for plotting the outputs of the “Average Data” component like monthly EPW data or averaged monthly-per hour data. It also supports daily data and any type of Energy simulation results.
Wind Profile - To go along with the new capabilities of natural ventilation in Honeybee, Ladybug now has a fully fleshed-out Wind Profile component that allows you to visualize how wind speed changes with height in relation to your building geometry. The component is geared to understanding the conditions of prevailing wind and will be useful in the future for setting up CFD models. Credit goes to Djordje Spasic for adding in all of the new capabilities. In a similar vein, the appearance of the wind rose has also been improved thanks to suggestions from Alejandra Menchaca.
Faster Solar Adjusted Temperature - Thanks to the SolarCal method from the Center for the Built Environment at UC Berkeley (http://escholarship.org/uc/item/89m1h2dg), the solar adjusted temperature component now includes an option for a much faster calculation that produces results that are very close to those originally obtained with the genCumSky component. Instead of using the cumulative sky, the component can now accept the direct and diffuse radiation from the ImportEPW component. Over a whole year, this essentially takes a calculation that used to be a half-hour and shrinks it down to 10 seconds. Thanks again to those at UC Berkeley for keeping their work open source!
Instructions - Last but not the least, [It took me almost two years to understand this but finally] we have a text file that describes the installation step by step and is way easier to modify than a video. You can find it in the zip file. Credit goes to Chris!
We also want to welcome Anton, Patrick and Sandeep to the team. Anton has kicked off his development by working on a component to import and visualize epw ground temperature data and he will be continuing to develop components to bring in reliable precipitation data to Ladybug. With this basis, he will continue to implement Honeybee components for ground heat storage, earth tubes, rain collection and hot water systems. Patrick and Sandeep are working on integration of Honeybee to Energy Performance Calculator.
As always let us know your comments and suggestions.
Enjoy!…
ager As Grasshopper.Kernel.GH_Component.GH_InputParamManager)
pManager.AddTextParameter(
"Name", "N", "String", GH_ParamAccess.item)
pManager.AddPointParameter(
"Point", "P", "Point3d", GH_ParamAccess.item)
pManager.AddGenericParameter(
"Local Axis", "LA", "Null/Surface/Plane", GH_ParamAccess.item)
pManager.AddGenericParameter(
"Support", "S", "I_Model_Support", GH_ParamAccess.item)
pManager.AddGenericParameter(
"PointLoad", "PL", "List (of I_Model_PointLoad)", GH_ParamAccess.list)
pManager.AddGenericParameter(
"Group", "G", "List (of (I_Model_Group)", GH_ParamAccess.list)
End Sub
Protected Overrides Sub RegisterOutputParams(ByVal pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager)
pManager.AddGenericParameter(
"Node", "N", "I_Model_Node",GH_ParamAccess.item)
End Sub
Protected Overrides Sub SolveInstance(ByVal DA As Grasshopper.Kernel.IGH_DataAccess)
Dim inName As String = Nothing
Dim inP As Point3d = Nothing
Dim inLA As Plane = Nothing
Dim inS As I_Model.I_Model_NodeSupport = Nothing
Dim inPL As New List(Of I_Model.I_Model_PointLoad)
Dim inG As New List(Of I_Model.I_Model_Group)
Dim outNode As I_Model.I_Model_Node
If Not DA.GetData(0, inName) Then Return
If Not DA.GetData(1, inP) Then Return
If Not DA.GetData(2, inLA) Then Return
If Not DA.GetData(3, inS) Then Return
If Not DA.GetData(4, inPL) Then Return
If Not DA.GetData(5, inG) Then Return
Dim IM_P As I_Model_Node
IM_P =
New I_Model_Node(inP, Nothing, inName)
If Not DA.GetData(2, inLA) Then IM_P.SetLocalAxis(inLA)
If Not DA.GetData(3, inS) Then IM_P.SetSupport(inS)
If Not DA.GetData(4, inPL) Then
Dim PL As I_Model_PointLoad
For Each PL In inPL
IM_P.AddPointLoad(PL)
Next
End If
If Not DA.GetData(5, inG) Then
Dim G As I_Model_Group
For Each G In inG
IM_P.AddToGroup(G)
Next
End If
outNode = IM_P
DA.SetData(0, outNode)
End Sub
…
Added by Daniel Bosia at 9:22am on January 11, 2013
This blog post is a rough approximation of the lecture I gave at the AAG10 conference in Vienna on September 21st 2010. Naturally it will be quite a different experience as the medium is quite…
Added by David Rutten at 3:27pm on September 24, 2010
n common tasks like updating GH definitions, viewing images on the GH canvass, and augmenting existing study-types. Most of the improvements to Honeybee have been in the making for a while and are just getting into the spotlight with this release. Notably, a number of improvements have been made to support large-scale full building energy models, including fixes to memory issues with large models, better components for splitting building masses into zones, and the ability to store HBZones in external files. Additionally, the THERM workflows have gotten a boost and these simulations can now be run directly from the Grasshopper canvass.
As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee before you do so and update your scripts. So, without further adieu, here is the list of the new capabilities added with this release:
LADYBUG
Better Method for Updating Old Grasshopper Files - As many of you have come to realize, Ladybug + Honeybee is updated on a fairly regular basis, with a stable release roughly every 6 months and a github version that never ceases to improve itself on a weekly basis. For this reason, we realize that updating old Grasshopper definitions to use recent components is a challenge for many of us. While we’ve had some methods for this in the past, there were always hiccups, particularly when it came to components that had new inputs/outputs since the previous version. Accordingly, Mostapha has added a new “Ladybug_Update File” component that will automatically update any Grasshopper Definition to be synchronized with the version of Ladybug+Honeybee that is currently in your toolbar (aka. the components in your userobjects folder). If there is a component that has new inputs/outputs since the time you built the definition, it will be automatically circled in red in your GH definition and a newer version of the component will be automatically added right next to this component:
While you still have to do some manual connecting of inputs to the newer component in this case, it should be much faster than our older methods and will hopefully help your old definitions survive long into the future!
EPWmap Now includes OneBuilding Files - Mostapha has added a number of new features to the EPWmap web interface that the “Download Ladybug” component connects to. Among the improvements are a color wheel that quickly shows you how hot, cold, and comfortable a given climate is and, perhaps more importantly, there is now support for EPW files sourced from OneBuilding. With the addition of many more weather files, you should now be able to use Ladybug with ease for more locations across the planet. We should also note that the “Open EPW and STAT” component that downloads/unzips files from a URL now supports OneBuilding URLs.
New Image Viewer Component - Mingbo Peng has graced Ladybug with a fantastic new “Image Viewer” component that takes a given image file on one’s machine and displays it on the Grasshopper canvas. It also enables one to pull color data off of the image with ease by simply clicking on the pixel of the image one is interested in. This new component is useful for a wide variety of cases, including the viewing of screenshots after they have been taken with the “Ladybug_Capture View” or “Ladybug_Render View” components. However, many of you will likely recognize it as most immediately useful in workflows involving image-based Honeybee Daylight (Radiance) simulations. This is particularly true as Migbo has built-in the capability to read many image file types, including PNG, JPEG, GIF, TIFF and the High Dynamic Range (.HDR) image files that Radiance Outputs:
The following video gives a quick overview of the Image Viewer’s capabilities:
The new component can be found under the Ladybug_Extra tab and I think I speak for us all in saying thank you Mingbo for this great component!
New Sun Shades Calculator Released Under WIP - After over a year of software development and nearly a career's worth of geometric math development, a joint effort between Abraham Yezioro and Antonello Di Nunzio has produced a new sun shade design component that can be described as nothing short of “magical.” Based on a similar principle to the current “Ladybug_Shading Designer,” the new component takes an input of sun vectors and produces shade geometries that can block the vectors. However, in comparison to the shading designer, the range of shade options that are available in this new component is truly staggering, ranging from classic overhangs, louvers and fins to pergolas and custom shade surfaces. Perhaps more importantly, the calculation methods used by this new component are faster and more reliable. It can currently can be found under the WIP section of Ladybug and it will continue to evolve in new versions of Ladybug.
Renewable Component Now Support Sandia and CEC Photovoltaics Modules - Polishing off his many contributions to the “Renewables” section of Ladybug, Djordje Spasic has added support for a couple more ways of defining Photovoltaic modules for renewables estimation. Specifically, the Ladybug WIP section now includes components to import modules defined with the California Energy Commission (CEC) and Sandia Labs.
HONEYBEE
Support for OpenStudio 2.x - A few months ago, the National Renewable Energy Lab (NREL) released a stable version of OpenStudio version 2, which included a number of improvements in stability and available features. This stable release of Honeybee is built to work with the new version of OpenStudio and, in the coming months, Honeybee will be adding a few more capabilities to its OpenStudio workflows to support v2.x’s new capabilities. Most notable among these will be support for OpenStudio measures. Measures are short scripts written in Ruby using OpenStudio’s SDK to quickly edit and change OpenStudio models. They are fundamental to visions of OpenStudio as a flexible energy modeling interface and to Honeybee’s goals of being a collaborative interface between the architectural and engineering industries. Stay tuned for the next release for many of these new capabilities!
Critical Memory Issue Fixed for Large Energy Models - A number of you wonderful members of our community have been aware of computer memory issues with large Honeybee models for some time (examples: 1, 2, 3, 4). Namely, a model that is larger than 50 zones could quickly eat up 16 GBs of memory and change Honeybee from a fast-flying insect to something more reminiscent of a snail. We are happy to say that, after a much longer time than it should have taken us, we finally identified and fixed the issue. In this version of Honeybee, such large models can now be created using less than 2% of the memory and time previously. Thanks to all of you who made us aware of this and hopefully you will now reap the rewards of your struggle.
Split Building Mass Component Getting a Makeover - Many of you veteran Ladybug users will recognize Saeran Vasathakumar as one of the original contributors of Ladybug who added components for solar fans and envelopes years ago. Now he’s back with new components to split a building mass into zones that are truly revolutionary in their speed and methodology. Saeran has divided the new capabilities into two components (one for floor-by-floor subdivision and another for core-perimeter subdivision) and they both can be found under the WIP section of this release. In this WIP version, core-perimeter thermal zones can only be generated for all convex and very simple concave geometries. Most concave geometries and geometries with holes (or courtyards) in them will fail. However it can handle even very complex convex geometries with speed and ease. You can expect the component to start accommodating concave/courtyard geometries very soon.
Load / Dump HB Objects to File - Keeping in line with the support of large, full building energy models, this release includes full support for two components that can dump and load any HBObjects to a standalone file. All information about HBzones can go into this file including custom constructions, schedules, loads, natural ventilation, shading devices, etc. You can then send the resulting .HB file to someone else and they can load up the same exact zones in another definition. This also makes it possible to have one Grasshopper file for generating the zones and running the simulation and another GH definition to import results and color zones/surfaces with those results, make energy balance graphics, etc.
Write ViewFactorInfo to File - After many of you asked for it, the _viewFactorInfo that is output from the “Honeybee_View Factor” component can now be written out to an external file using the same Load / Dump HB Objects components cited above. For those of you who have worked with the comfort map workflows, you probably already know that calculating these view factors is one of the most time consuming portions of building a microclimate map. Having to re-run this calculation each time you want to open up the Grasshopper script is a nuisance and, thanks to this new capability, you should only have to run it once and then store your results in an external .HB file.
Transform Honeybee Components Modified for Large Model Creation - Many large buildings today are made up of copies of the same rooms repeated over and over again across multiple floors, or along a street, etc. Accordingly, one can imagine that the fastest way to create a full building energy model of such buildings is to simply move and copy the same zones several times. This is what a new set of edits to the Honeybee Transform components is aimed at supporting by allowing one to build a custom set of zones, translate them several times with a Honeybee_Transform component, then solve adjacencies on all zones to make a complete energy model.
Central Plants Available on HVAC Systems - While Honeybee has historically supported the assigning of separate HVAC systems to different groups of zones, each HVAC was always an entirely new system from the ground up. So a building with separate VAV systems for each floor would be modeled with a different chiller and boiler for each floor. While this can be the case sometimes, it is more common to have only one chiller and boiler per building but separate air systems for each floor. The new ‘centralPlant_’ options on the Honeybee coolingDetails and heatingDetails enable you to create this HVAC structure by making a single boiler and chiller for any HVAC systems that have this option toggled on. Furthermore, in the case of VRF systems, you can also centralize the ventilation system, using the grouping of zones around a given HVAC to assign which zone terminals are connected to a given heat pump.
More HVAC Templates Added - As the profession continues to push the industry standard towards lower-energy HVAC systems, Honeybee intends to keep up. In this release, we have included a few more templates for modeling advanced HVAC systems including Radiant Ceilings, Radiant Heated Floors + VAV Cooling, and Two Ground Source Heat Pump (GSHP) systems. Variable Refrigerant Flow (VRF) systems have also gotten a large boost as it is now possible to model these systems with more efficient water-source loops. The next release will include the ability to model central ground source systems that use hydronics for heating cooling delivery.
Run THERM Simulations Directly from Grasshopper - Anyone who has used the THERM workflow in the past likely realized that, while Honeybee can write the THERM file, you would still have to open model in THERM yourself and hit “simulate” to get results. Now that LBNL has started a transition to becoming more open, they have graciously allowed free access for everyone to run THERM from a command line. What this means for Honeybee is that you no longer need to open THERM at all in order to get results and you can now work entirely in Rhino/Grasshopper. This also opens up the possibility of long parametric runs with THERM models since you can now automatically run simulations and collect results as you animate sliders, use galapagos, etc. A special thanks is due to the LBNL team for exposing this feature, including Setphen Selkowitz, Christian Kohler, Charlie Curcija, Eleanor Lee, and Robin Mitchell.
All Options Exposed for THERM Boundary Conditions - To finish off the full implementation of THERM in Honeybee, a final component has been added called “Honeybee_Custom Radiant Environment.” This component completes the access to all boundary condition options that THERM offers, including separate radiant and air temperatures, different view factor models, and the specification of additional heat flux (which is typically used to account for solar radiation).
Improvements to Schedule-Generating Components - Many of you who have watched the Honeybee energy modeling video tutorials have likely gotten in the habit of using CSV schedules for everything. While this is definitely one valid way to work, it is not always the most efficient since simple schedules can be specified much more cleanly to EnergyPlus/OpenStudio and the use of CSVs can also make it difficult to share your energy models (since you have to send CSV files along with the schedules themselves). This release adds two new schedule components that should take care of a lot of cases where CSV schedules were unnecessary. The new “Constant Schedule” component allow you to quickly make a schedule that is set at a single value or a set of constantly repeating 24-hour values. The second component allows you to create “Seasonal Schedules” by connecting “week schedules” from the other schedule components along with analysis periods in which these seek schedules operate. Together, these will hopefully make our schedule-generating habit a bit better as a community.
Lastly, many of you may know Mingbo Peng as the current maintainer of the Design Explorer web interface and the Colibri components under TTToolbox. Both of these tools have been revolutionary in enabling “brute force” studies of design spaces (aka. Grasshopper scripts where one runs all combinations of a set of sliders). Now, Mingbo has graced Ladybug with the aforementioned image viewer component and it is with pride that we welcome Mingbo Peng to the development team!
As always let us know your comments and suggestions.Cheers!
The Ladybug Tools Development Team
…