load path and what is a realistic and buildable structure vs one designed ad-hoc that looks cool.
No GH isn't geared to parametric constraint based modelling like CATIA. Then again, neither is CATIA a graphical algorithm. You are comparing apples with oranges.
Having used the CATIA API a lot, I understand the differences.
I disagree as regards the deployment of CATIA. It is very much still a "ivory tower" tool and the knowledge of its use in the AEC is very small and not shared widely. It will continue to do so until it becomes accessible to a wider audience much like rhino and GH. It has also stifled now for over 10 years, and with the release of V6, I don't see it ever catching up. The business model of rhino is better in that it encourages hobbyists to push the tool instead of waiting for a gargantuan software developer to make changes.
With constraint based parametric modelling and parametric modelling per se, the naming convention and ordering of data is key. I agree this is where more work is needed mote in GH.
Interesting job ad you shared, shows how little the person advertising understands parametric modelling. Understanding means nothing unless you have applied it.
To add, by work flow, what I implied is that we have an interoperable work flow to go form Excel to SAP to rhino to Tekla. All of that can potentially be set up on the canvas, on the fly, with the use of plug-ins. You cant do that with GC/CATIA or anything else. They don't provide a medium to define work flows.…
st shortest path. The guiding splines would work like a forcefield so that paths are "drawn" towards them with a user defined strength and radius of influence.Since each path is basically independent, it should be relatively straight forward to multithread. I downloaded the C# code for the pathfinding node and have to see if I'm up to it.
Would also be interesting to know how far away the first beta of a multithreaded GH 2 is.
I also had some hopes when "Fabric Engine" showed a demo of a Rhino exporter, since its "Canvas" is an extremely optimized node system that's fully multithreaded and optionally uses the GPU, which could be interesting to explore for some heavy lifting if they for instance would attach it to GH. But I guess it does not make much sense for them as a target.
Above image uses 20000 random points. In Softimage XSI ICE this would not be much, since it's nodes are fully multithreaded and optimized for huge numbers of particles and point deformation. In GH, with anything above 500 points, things get rather "meditative".
Illustrator takes up to half an hour after each and every change to colour, line style, blending mode etc. I have one even more complex file with over 3 GB size and there Illustrator (CS6 x64) goes into some kind of trance and after some hours of thinking moves on to some advanced psychotic, catatonic state to never fully return... ;-)So usually I run it in the background while doing something else...
I recently tried different other vector graphics apps (Inkscape, Affinity Designer, Xara) but they were even worse if they were able to open the files at all. Maybe I should give Corel a try too.
Cheers and thanks for your offer! Your work is a major inspiration for me while learning Grasshopper!
Tom…
if you can't resolve the details ... well ... they do that as well. For Europe contact my good friend Peter Stevens. (BirdAir).
In general: PRIOR designing ANYTHING (at all) you must formulate some kind of collaboration with a specialized manufacturer. Problem is that ... er ... if they don't know you they don't give much attention (this is a rather "closed" AEC sector).
On the other hand if your membrane is bespoke designing the components (anchor plates, masts, tensioners etc etc) and/or using bespoke ones available in the market (not many around. mind)... well ... this IS the core of the matter. Rhino is NOT suitable for that kind of stuff by any means.
Kangaroo 1/2 is the way to go when inside GH. Other apps especially the "pro" ones are very expensive. BirdAir has the best software for that matter but is mostly an internal product available as well only for few "strategic" partners as they call Architects who can design that kind of stuff.
Other than that have some fun:
Tensile Membranes test3 - Grasshopper
And this ... well ...is about NOT doing it:
Need help about using Kangaroo for form finding
…
precise) that unfortunately has more than one staff. This means that I pay the bills (unfortunate to the max). Practice is vertical meaning no Structural/HVAC etc services.
2. AEC Projects are made by teams. Period.
3. Teams are organized with some sort of hierarchy. Period.
4. On each team there's always one leader. Teams can being sampled in group teams - call them clusters (kinda like a List of List of ...)
5. All cluster leaders report to the supreme human being (yours truly). Leader heads are always on my disposal (it's fun to decapitate someone: I do this every Monday).
6. AEC projects are made with 1% idea(s) and 99% of what we call "sludge" (this is not my job: I'm the One , he he).
7. You can't steer any boat if you don't know each @@$#@ nut and bold. In the past there was a naive approach on that matter (ruined automotive companies, potato chip makers, software vendors, political systems, secret service agencies ... etc etc).
8. Efficiency is above all (even above tax-free cash).
9, You can't do ANY AEC real-life thing with what GH has to offer (nor Rhino is an AEC BIM app - it would never be). You simply use GH as a supplement to Generative Components (and/or as stand alone because it's good fun). There's nothing that GH does (I'm speaking solely for AEC as always) that can't being done with Generative Components.
10. I've done so fat 257 projects (a "bit" bigger than a house, he he). Let's say about 51427 drawings (master, master details, details) and 78956 lines of text (specs, cost estimations, space schedules, supplier lists, contracts, cats and 1 dog).
If you combine all the above you'll have the answer (i.e. why I use solely - if possible - code and not GH components). If you can't combine them I'm sorry.
PS: C# is the absolute standard (never judge a language as a "stand-alone" thingy).
best, Peter (Prince of Cynics)
…
file. A TSpline made thing in fact.
2. This atroci ... er ... hmm ... I mean unspeakable beauty uses an exo-skeletal load bearing structure hence is THAT big (BTW: Apparently nobody knows what thermal bridge is nor thermal expansion nor vapor condensation ... but these are "minor" details these holly blob days, he he).
3. 2 means that some nodes of that "grid" MUST "meet" floors in order to support them and (hopefully) withstand some seismic forces. BTW: A Richter scale 9 (for an hour) is all what this building actually needs (that's acid "humor").
4. The "smarter" way to do this is to spread "some" (i.e a lot) random points (Note: David's algo yields "evenly-spaced-points" within the limits of the possible) on the guide blob (a polysurface in fact).
5. Then ... you need some algo that tests proximity AND "adjusts" the Z in order to have some node points "co-planar" (Z) with the floors.
6. Then you triangulate all that stuff (the points, that is) using some decent Ball Pivot Algorithm (NOT Delauney) and you get a triangulated mesh that "engulfs" the guide blob. If you want some quads (as shown) this is also possible.
7. So you have edges ... i.e poly lines (per mesh face) and if you offset them ... you have "drilling" profiles that you must use against a second guide "thickened" blob for creating a continuously smooth exo-skeletal LBS (as shown). Of course Rhino (being a surface modeller) could require years to do this solid difference opp (or an eternity).
8. Rounding the "lips" of that LBS Brep is out of question with Rhino or GH (but it can been done very easily using other apps). Then you must "split" the Brep (in modules? in nodes + "rodes"? you tell me) in order to make it in real-life (what about forgetting all that?, he he).
9. Then, there's the glazing thingy that is made via quads meaning planarity. This is achievable with Kangaroo2 but is a bit tricky.
Moral: WHAT a gigantic pile of worms is this thread of yours...
more soon.
…
igned by this software may be terrible, this is how the future is being shaped, so an understanding of the technology is important.
http://bimandintegrateddesign.com/2014/10/24/googles-bim-busting-app-for-design-and-construction/
https://vimeo.com/107291814
-Projects are due May 8th at the WAAC Final Gallery (I think at 5:30 PM). You will have your board(s) pinned up and your physical model complete underneath. The location is still being worked out, so I will let you know when I know. After the physical submission, a digital submission is required as well. There should be at minimum -
A board with the discussed drawings and images below, named LastName_FirstName_FinalProject.pdf
A photo of your physical model (if not included on the board), named
LastName_FirstName_FinalModel.pdf.
These should be posted on the dropbox sometime before the last day of the semester. Your project will not be graded if you do not physically submit on May 8th and digitally submit sometime before the semester is over.
-Project brief is below
Project Brief: Up until now, you have been using grasshopper to develop, analyze, and fabricate architectural ideas in a very controlled format. The final project is a chance to combine this knowledge with your own design intent and aspirations. The project will use specific deliverables to spur growth, but also allow for you, the designer, to do what you please within the following boundaries.
Requirements:
# open project# must be a design project # story of what you are designing and why you are using grasshopper - specific design intent# must have physical scale model # must have 24” x 36” board - made in Adobe InDesign or Photoshop # grasshopper definition image # 1 artistic rendering - any format - with scale figures # 5 iterations of your project must be presented # 1 diagram to visually describe your project # text describing project # process drawings - photos/sketches/models/other iterations# this is the bare minimum - to have an excellent project, one must go above and beyond these requirements# talk to me if you have out of the box ideas of presenting/ teams / etc...
That is all, there are no assignments due this week, just keep working on those projects. I am available for help during the week, just email or post in the forum. USE THE GRASSHOPPER FORUM IF YOU ARE STUCK. There are many people on here that are way smarter than I that can help you.
See you all next week!…
hopper) and High Definition visualizations (V-Ray) and exploring its scientific innovations supporting the users' platform philosophical ideas.
SESSIONS: 5 sessions of 8 hours (40 hours total)
E-MAIL: educacion@chconsultores.net
REGISTRATION: (55) 56 62 57 93
TECHNICAL INFO: 044 (55) 31 22 71 83
INSTRUCTORS: Have past experience working at Gehry Technologies, and participated at studios with Eric Owen Moss and Tom Wiscombe at SCI-Arc (Southern California Institute of Architecture).
Day 1: Introduction to MAYA tools, 3D exercise start.
Day 2: Continue 3D exercise.
Day 3: Original 3D architecture design.
Day 4: Grasshopper optional application on 3D architecture design.
Day 5: V-Ray Application on 3D architecture design.
30 DAY TRIAL SOFTWARE DOWNLOAD:MAYA 2012: http://www.autodesk.com/products/autodesk-maya/free-triaRHINO 4: http://s3.amazonaws.com/files.na.mcneel.com/rhino/4.0/2011-02-11/eval/rh40eval_en_20110211.exe3DS MAX 2010: http://www.autodesk.com/products/autodesk-3ds-max/free-trialVRAY FOR 3DS MAX: http://www.vray.com/vray_for_3ds_max/demo/thankyou.shtml#thankyouPHOTOSHOP e ILLUSTRATOR: https://creative.adobe.com/apps?trial=PHSP&promoid=JZXPS
www.helenico.edu.mx
www.scifi-architecture.com/#!workshops/c1wua
LIKE US ON: www.facebook.com/scifiarchitecture
…
tly light vehicles such as bicycles and variations thereof. Although frame design is mostly of a structural nature, there are a number of elements that interact mechanically. Also, as you may be aware, bicycle and high grade tubing is not of constant section so shelling method in FEA is out of the question, but even so, because the joint needs to be modeled very accurately, that means different geometry and properties for welded area, heat affected area and base material; like so a simpler FEA package may not suffice.
I don't know karamba extensively, rather superficially, actually, but I'm under the impression it mostly deals with beam analysis. Pls correct me if I am under the wrong impression. I must say it would be very nice to have a complete FEA package inside GH really!!
Typical workflow for me would be to model everything in Solidworks, and then export to Ansys Mechanical. Although Ansys needs to read every input and naturally remesh back again, integration within Solidworks, Catia, Inventor, Creo, Solidthinking... and the sort, works reasonably well.
Now, I don't remember Ansys having a Rhinoceros plugin so that you could bridge the 2 together, but maybe I should go check again.
3) Great work with that fractal tree. It's nice to know it is a possibility at least. I have tried Apophysis and others, but to my knowledge there's not an application that could deliver 3D fractal designs in a way that you could further manipulate with conventional modelling techniques, maybe apply textures and render, or export to CAM, 3D printing... etc.
P.S.: I have tried all the apps mentioned above and then some more. All of them have serious limitations when it comes to parametric design. For complex models they crash plenty upon rebuilding... a number of time consuming errors appear, and general work flow isn't very efficient for purely parametric work. Speaking for myself, I'd rather spend the time on a definition that enables me to have full control and then generate a new result within seconds, than model everything very quickly and then taking a long time with each new result.
(Thanks for the replies and sorry for the long text, you asked to elaborate).…
ts (other than Kangaroo - if required). Anyway notify if you want some taste of them (but they are a bit "chaotic" : too many parameters etc etc ...). Warning: Almost all are written with MCAD apps in mind: GH is used SOLELY as a graphical editor/topology solver and just makes the simplest instance definitions possible in order to send them (via STEP) to some MCAD (Frank G uses CATIA/Digital Project as you may probably know, CATIA is my favorite toy as well) for actually designing the components and composing the whole.
2. "Equality" in modules (panels/glass/lexan) it's not an issue (other than aesthetics). I mean cost wise since modules are prepared via CNC these days. I wouldn't suggest to waste your time with "equality" puzzles and completely ignoring the big picture (real-life) that is FAR and AWAY from aesthetics. I mean: assume that I of someone else or Daniel can "equalize" things (up to a point): Is this sufficient for designing a similar real-life solution? In plain English: don't get occupied by the tree and ignore the forest.
3. As regards the frame in most of cases some MERO type of modular system is used: either a "flat" dome-like arrangement or a classic spaceframe or a hybrid system [push: tubes, pull: cables]. Hybrids are the most WOW (and costly) for obvious reasons. When properly done (and combined with a planar glazing system) THIS is the star of the show.
4. As regards the skin we use either "hinged" custom stuctural/semi structural aluminum extrusions (they can adapt to different dihedrals up to a point) or classic custom planar SS16L systems that also can adapt to dihedrals. A custom planar glazing solution is hideously expensive, mind (say: 1K Euros per m2).
5. Smart Glass tech (changes light transmission properties under the application of voltage) is gradually penetrating the market especially in future bespoke designs.
So in a nutshell: these are "pro" territory - if I may use the term, thus I don't expect to find ANY similar "turn-key" solution in the very same sense that you can't find a tensile membrane turn-key solution.
Meaning that practices that can do it ... er ... they keep the cookies for themselves. …