led to write F2825E_glzP_0 to idf file8. index out of range: 09. Failed to write 29BFFB_glzP_0 to idf file10. index out of range: 011. Failed to write 613DE8_glzP_0 to idf file12. index out of range: 013. Failed to write 3CBCE5 to idf file14. index out of range: 015. Failed to write BDEF6C to idf file16. index out of range: 0
Etc...
Someone knows how to solve this problem.
In attached you can find idf file, gh definition and the errors list.
Thanks for availability.
Best,
Andrea…
curves and then want to get a grid of frames on those lines.
When the lines are horizontal, everything works as expected (see first image). But when I make the contours vertical, there is a weird and seemingly random pattern of the frames (see second image). Also the number makes no sense at all: There are 40 curves and a count of 11, yet it only creates 117 frames.
Anybody have an Explanation and/or fix for this?
Alternatively is there a Transpose Matrix equivalent for Lists with Sublists, ie. I have a list of 10 lists with 100 items, and want to instead have 100 lists with 10 items. I need to reorder the frames, so that it doesn't go index 1, index 2, etc. in the horizontal direction but in the vertical.
Thank you!…
hange to a rectangle or a sequence of lines to get the tube geometry. Author of the video explained how to do this in the comments, but that didn't help. :(
"Alan Rodriguez Carrillo 1 year ago + Aldo Villanueva Hi, what you can do is try to handle points (4) with the ListITEM component and change the order of relation, for example (0,1) (1,2) (2,3) (3, 4) (4.0) in a panel. Subsequently do the relation of points through a line from points or LineSDL and elaborate the same steps that are explained in this video. Thanks.
Carlos González Puchol 11 months ago + Aldo Villanueva + Alan Rodríguez Carrillo Buenas, Alan and Aldo. I made a closed, tube design. First I listed the 4 points and put them in order with the polyline the polyline, making it closed. Then I had to close them also in the last steps before doing the triangulation."
Can anyone explain how to make this work ? It seems easy. For a person that knows the trick :))
https://www.dropbox.com/s/9dnyfoielum6m1r/PABELLON_last.3dm?dl=0 https://www.dropbox.com/s/y8xdiaf66xbyn9l/PAVILION.gh?dl=0…
ents will react to sensors, creating a range of different lighting and spatial effects that will trigger further movement and produce a feedback loop of behaviour and response. To accommodate this responsiveness, the design will be developed using parametric associative modeling, processing, arduino, and digital fabrication using the CNC and Laser Cutters. Students can both develop completely new designs, and/or work on the evolution of the Workshop 1 Supple Pavilion project.
The Visiting School will return to Barracão Escola de Carnaval to evolve the design of the migrating Pavilions, their contents and their context, exploring a design philosophy of interactive event design and the production of a creative fusion of high-tech design generation and fabrication with low-tech redefinition of Carnival-float artisan techniques, paraphernalia, and materials. We will work in the immense and creative Pimpolhos warehouse, collaborating with local artisans of several Samba Schools in the post-industrial, partly-derelict Porto do Rio area, (the birthplace of the Carnival and Samba), introducing digital fabrication techniques. The goal is to create interventions for micro-venues and cultural events that express the identity of the Samba culture within the `Porto Maravilha` planning.
Instruction for the Supple Pavilions workshop series will be led by Rob Stuart-Smith of Kokkugia, Lawrence Friesen of Generative Geometry, Ivan Ivanoff of Interactive Art Estado Lateral Media Lab, Toru Hasegawa of Proxy, with Anne Save de Beaurecueil and Franklin Lee of SUBdV, along with other AA tutors, the Pimpolhos Artistic Directors, and Carnival float-fabricators. Each workshop will provide an introduction to computational design (Grasshopper, Processing and Arduino) and digital fabrication, no previous computational experience is required. Students taking part in multiple workshops will have access to advanced computation instruction. This workshop will produce 1:1 prototyping, exploring the structure and transformations of the pavilions. Final fabrication and assemblage will occur in July.
The workshop is open to architecture and design students and professionals worldwide. Participants can take part in one or more workshops, with fee discounts offered to those interested in multiple workshops.
…
nish your calculation)
This Timeout is a security reason and also let the user continue his/her work in RH
after it is finished just refresh the ecotectlink and request the final analysis
[uto].......
…
t all of the output messages are set to "LOW" which is a digital signal (and not a servo signal). If you right-click on the DPin11 input and set the input state to Servo, then you should be able to control your servo from 0-180 degrees.
Also, your circuit setup is a little strange to me. Basically, you should be able to control 1 servo just from the Arduino board (connected to your computer). You don't really need an external power supply You can basically connect the GND pin from your Arduino directly to the GND wire on your servo... you can connect the 5V Output pin on the Arduino to your Power line on your Servo... and your Signal wire on your servo should go to Digital Pin 11 (according to your screenshot). Of course, you can use an external power supply if you want... but it may be more complicated than is needed (plus, I'm not sure why you need to use that blue adapter at the left of your picture). Anyway, just a suggestion.
HTH,
Andy…
fting all the layers up by the same value ( 0 becomes 1, 10 becomes 11, etc) will fix this.
- You are connecting the last curve parameter of the first step to the first curve parameter of the second step. Instead, bake the first curve parameter, then assign the baked curves to the second curve parameter. That way you can later directly manipulate the scaled curves.
- Finally, you never scaled the topo to the model size, 12" x 12", so you are asking the Curve Division component to divide each curve that is thousands of feet long by segments that are a fraction of a foot. It's doing it, but that task would take so long that it appears to be 'crashing' from your perspective.
I tested these fixes and it runs fine, although I have noticed that you scaled model is running beyond the domain for Z-values. I believe it's a weakness of the example definition. The definition I posted makes use of a Remap Numbers component instead of using division/ratios. This should fix that problem. Thanks for posting!…
j.
if the item 0 is (16.76159) in the original list and in the reorderd list is the item n4 (16.76159) I want in a new list that integrates both indices of the number (16.76159) using the structure of the reordered list and replacing the decimal numbers for the corresponding index in the original list.
the new list would look like.
reordered index - original index
0. 11
1. 19
2. 8
etc.
as always, any help is useful.
thanks!
federico
argentina.…
g-in, brief theory of complex systems, introduction to multi-agent systems and non-linear design, flocking, Boid library, basic examples - brownian motion, adhesion, separation, alignment, geometry following.-----------------------TIME: first session10am – GMT, London11am – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw9pm - Sidney7pm – Tokyo6pm – Beijing, Shanghai, Shenzhen, Hong Kong, Taipei3:30pm – Mumbai3pm – Karachi2pm - Samara1pm – Baghdad, Moscow, St Petersburg12pm – Istanbul, Athens, Helsinki, Cairo, JohannesburgTIME: second session3pm – GMT, London4pm – Paris, Brussels, Rome, Vienna, Budapest, Bratislava, Warsaw7pm – Dubai, Abu Dhabi, Baku6:30pm – Tehran6pm – Baghdad, Moscow, St Petersburg5pm – Istanbul, Athens, Helsinki, Cairo, Johannesburg1pm – Rio de Janeiro, São Paulo, Montevideo12pm – Buenos Aires, Santiago10am – Toronto, New York City, Bogota, Lima9am – Mexico City7am – Los AngelesWEBINARSThe rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. The webinars are divided into four groups: Essential, Advanced, Iterative and Architectural. If you are a Rhinoceros 3D or Grasshopper® newcomer, you are advised to take all the Essential sessions before proceeding to the next level. If none of the proposed topics suit your needs or if you require special treatment, you can request a custom-tailored 1on1 session. All sessions are held entirely in English.The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials.…
Added by Jan Pernecky at 3:36pm on February 17, 2015
ow the steps of the successful run when step 1.2 is bypassed (note that the and OpenFOAM session is open in the background while running the Butterfly demo file):
1. create wind tunnel, and use different parameters of (4,4) for _globalRefLevel_ as suggested by Theodoro in this post
2. run blockMesh:
3. run snappyHexMesh:
4. run checkMesh:
5. connect the case from checkMesh to simpleFOAM and run the simulation:
6. the simulation converged at 1865 iteration, but the results visualization part has some problem:
7. so I revised this part according to suggestions from Hagit:
8. and the results can be visualized for P and U values:
The GH file used for the successful run shown above is attached here.
Now, the following is the error I got when the case from the update fvScheme component is used for simpleFOAM simulation:
the warning message on the simpleFOAM component is:
1. Solution exception: --> OpenFOAM command Failed!#0 Foam::error::printStack(Foam::Ostream&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #1 Foam::sigFpe::sigHandler(int) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #2 ? in "/lib64/libc.so.6" #3 double Foam::sumProd<double>(Foam::UList<double> const&, Foam::UList<double> const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #4 Foam::PCG::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #5 Foam::GAMGSolver::solveCoarsestLevel(Foam::Field<double>&, Foam::Field<double> const&) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #6 Foam::GAMGSolver::Vcycle(Foam::PtrList<Foam::lduMatrix::smoother> const&, Foam::Field<double>&, Foam::Field<double> const&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::Field<double>&, Foam::PtrList<Foam::Field<double> >&, Foam::PtrList<Foam::Field<double> >&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #7 Foam::GAMGSolver::solve(Foam::Field<double>&, Foam::Field<double> const&, unsigned char) const in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libOpenFOAM.so" #8 Foam::fvMatrix<double>::solveSegregated(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/lib/libfiniteVolume.so" #9 Foam::fvMatrix<double>::solve(Foam::dictionary const&) in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #10 Foam::fvMatrix<double>::solve() in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #11 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam" #12 __libc_start_main in "/lib64/libc.so.6" #13 ? in "/opt/OpenFOAM/OpenFOAM-v1606+/platforms/linux64GccDPInt32Opt/bin/simpleFoam"
The error message from the readMe! output node is attached below as a text file.
Hope you can kindly advise what the important steps or parameters I might have missed here. I assume it might be related to OpenFOAM rather than with the Butterfly workflow...
Thank you very much!
- Ji
…