ion of both Ladybug and Honeybee. Notable among the new components are 51 new Honeybee components for setting up and running energy simulations and 15 new Ladybug components for running detailed comfort analyses. We are also happy to announce the start of comprehensive tutorial series on how to use the components and the first one on getting started with Ladybug can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O
A second one on how to use the new Ladybug comfort components can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v
Here is a short list highlighting some of the capabilities of this current Honeybee release:
1) Run EnergyPlus and OpenStudio Simulations - A couple of components to export your HBZones into IDF or OSM files and run energy simulations right from the grasshopper window! Also included are several components for adjusting the parameters of the simulations and requesting a wide range of possible outputs.
2) Assign EnergyPlus Constructions - A set of components that allow you to assign constructions from the OpenStudio library to your Honeybee objects. This also includes components for searching through the OpenStudio construction/material library and components to create your own constructions and materials.
3) Assign EnergyPlus Schedules and Loads - A set of components for assigning schedules and Loads from the Openstudio library to your Honeybee zones. This includes the ability to auto-assign these based on your program or to tweak individual values. You can even create your own schedules from a stream of 8760 values with the new “Create CSV Schedule” component. Lastly, there is a component for converting any E+ schedule to 8760 values, which you can then visualize with the standard Ladybug components
4) Assign HVAC Systems - A set of components for assigning some basic ASHRAE HVAC systems that can be run with the Export to OpenStudio component. You can even adjust the parameters of these systems right in Grasshopper.
Note: The ASHRAE systems are only available for OpenStudio and can’t be used with Honeybee’s EnergyPlus component. Also, only ideal air, VAV and PTHP systems are currently available but more will be on their way soon!
5) Import And Visualize EnergyPlus Results - A set of components to import numerical EnergyPlus simulation results back into grasshopper such that they can be visualized with any of the standard Ladybug components (ie. the 3D chart or Psychrometric chart). Importers are made for zone-level results as well as surface results and surfaces results can be easily separated based on surface type. This also means that E+ results can be analyzed with the new Ladybug comfort calculator components and used in shade or natural ventilation studies. Lastly, there are a set of components for coloring zone/surface geometry with EnergyPlus results and for coloring the shades around zones with shade desirability.
6) Increased Radiance and Daysim Capabilities - Several updates have also been made to the existing Radiance and Daysim components including parallel Radiance Image-based analysis.
7) Visualize HBObject Attributes - A few components have been added to assist with setting up honeybee objects and ensuing the the correct properties have been assigned. These include components to separate surfaces based on boundary condition and components to label surfaces and zones with virtually any of their EnergyPlus or Radiance attributes.
8) WIP Grizzly Bear gbxml Exporter - Lastly, the release includes an WIP version of the Grizzly Bear gbXML exporter, which will continue to be developed over the next few months.
And here’s a list of the new Ladybug capabilities:
1) Comfort Models - Three comfort models that have been translated to python for your use in GH: PMV, Adaptive, and Outdoor (UTCI). Each of these models has a “Comfort Calculator” component for which you can input parameters like temperature and wind speed to get out comfort metrics. These can be used in conjunction with EPW data or EnergyPlus results to calculate comfort for every hour of the year.
2) Ladybug Psychrometric Chart - A new interactive psychrometric chart that was made possible thanks to the releasing of the Berkely Center for the Built Environment Comfort Tool Code (https://github.com/CenterForTheBuiltEnvironment/comfort-tool). The new psychrometric chart allows you to move the comfort polygon around based on PMV comfort metrics, plot EPW or EnergyPlus results on the psych chart, and see how many hours are made comfortable in each case. The component also allows you to plot polygons representing passive building strategies (like internal heat gain or evaporative cooling), which will adjust dynamically with the comfort polygon and are based on the strategies included in Climate Consultant.
3) Solar Adjusted MRT and Outdoor Shade Evaluator - A component has been added to allow you to account for shortwave solar radiation in comfort studies by adjusting Mean Radiant Temperature. This adjusted MRT can then be factored into outdoor comfort studies and used with an new Ladybug Comfort Shade Benefit Evaluator to design outdoor shades and awnings.
4) Wind Speed - Two new components for visualizing wind profile curves and calculating wind speed at particular heights. These allow users to translate EPW wind speed from the meteorological station to the terrain type and height above ground for their site. They will also help inform the CFD simulations that will be coming in later releases.
5) Sky Color Visualizer - A component has been added that allows you to visualize a clear sky for any hour of the year in order to get a sense of the sky qualities and understand light conditions in periods before or after sunset.
Ready to Start?
Here is what you will need to do:
Download Honeybee and Ladybug from the same link here. Make sure that you remove any old version of Ladybug and Honeybee if you have one, as mentioned on the Ladybug group page.
You will also need to install RADIANCE, DAYSIM and ENERGYPLUS on your system. We already sent a video about how to get RADIANCE and Daysim installed (link). You can download EnergyPlus 8.1 for Windows from the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/?utm_source=EnergyPlus&utm_medium=redirect&utm_campaign=EnergyPlus%2Bredirect%2B1).
“EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings.”
“OpenStudio is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance.”
Make sure that you install ENERGYPLUS in a folder with no spaces in the file path (e.g. “C:\Program Files” has a space between “Program” and “Files”). A good option for each is C:\EnergyPlusV8-1-0, which is usually the default locations when you run the downloaded installer.
New Example Files!
We have put together a large number of new updated example files and you should use these to get yourself started. You can download them from the link on the group page.
New Developers:
Since the last release, we have had several new members join the Ladybug + Honeybee developer team:
Chien Si Harriman - Chien Si has contributed a large amount of code and new components in the OpenStudio workflow including components to add ASHRAE HVAC systems into your energy models and adjust their parameters. He is also the author of the Grizzly Bear gbxml exporter and will be continuing work on this in the following months.
Trygve Wastvedt - Trygve has contributed a core set of functions that were used to make the new Ladybug Colored Sky Visualizer and have also helped sync the Ladybug Sunpath to give sun positions for the current year of 2014
Abraham Yezioro - Abraham has contributed an awesome new bioclimatic chart for comfort analyses, which, despite its presence in the WIP tab, is nearly complete!
Djordje Spasic - Djordje has contributed a number of core functions that were used to make the new Ladybug Wind Speed Calculator and Wind Profile Visualizer components and will be assisting with workflows to process CFD results in the future. He also has some more outdoor comfort metrics in the works.
Andrew Heumann - Andrew contributed an endlessly useful list item selector, which can adjust based on the input list, and has multiple applications throughout Ladybug and Honeybee. One of the best is for selecting zone-level programs after selecting an overall building program.
Alex Jacobson - Alex also assisted with the coding of the wind speed components.
And, as always, a special thanks goes to all of our awesome users who tested the new components through their several iterations. Special thanks goes to Daniel, Michal, Francisco, and Agus for their continuous support. Thanks again for all the support, great suggestions and comments. We really cannot thank you enough.
Enjoy!,
Ladybug + Honeybee Development Team
PS: If you want to be updated about the news about Ladybug and Honeybee like Ladybug’s Facebook page (https://www.facebook.com/LadyBugforGrasshopper) or follow ladybug’s twitter account (@ladybug_tool).
…
doing this with the current tools or a bit of scripting since the Flickr API allows you to make requests in a REST format, but utilizing the Flickr.net API library makes it much simpler.
First and foremost, you need a Flickr API key...do you have one of those?
A great way to get to know the Flickr API is with the API Explorer. Here is a link to the page for the flickr.photos.search method explorer: http://www.flickr.com/services/api/explore/flickr.photos.search
The cool thing about this page is that it generates the REST Http call towards the bottom. So, here is what I did:
1. Grab the coordinates of the bounding box per Flickr API request:
bbox (Optional)
A comma-delimited list of 4 values defining the Bounding Box of the area that will be searched. The 4 values represent the bottom-left corner of the box and the top-right corner, minimum_longitude, minimum_latitude, maximum_longitude, maximum_latitude. Longitude has a range of -180 to 180 , latitude of -90 to 90. Defaults to -180, -90, 180, 90 if not specified. Unlike standard photo queries, geo (or bounding box) queries will only return 250 results per page. Geo queries require some sort of limiting agent in order to prevent the database from crying. This is basically like the check against "parameterless searches" for queries without a geo component. A tag, for instance, is considered a limiting agent as are user defined min_date_taken and min_date_upload parameters — If no limiting factor is passed we return only photos added in the last 12 hours (though we may extend the limit in the future).
So, I went to Google Earth, picked a city (London, UK) and dropped two pins:
This gave me two locations, which I can put into the Explorer Page next to the bbox option. Here is what I put for these two points: -0.155941,51.496768,-0.116783,51.511431
2. Check has_geo
3. In extras, type in geo
4. Make the call!
You will see a list of responses in an XML format, these responses will be from the first page. Geolocated photos are limited to 250 / page, so you will have to grab them page by page.
If you want to add more options (minimum upload date, maximum upload date, etc) you can do this as well)
The best is at the bottom, you get the full http call for this: http://api.flickr.com/services/rest/?method=flickr.photos.search&api_key=ffd44f601393a46e86aa3a5f8a013360&bbox=-0.155941%2C51.496768%2C-0.116783%2C51.511431&has_geo=&extras=geo&format=rest&api_sig=b42330e5d1523bd5fe60c2ad43acde99
Notice this call has some other api key, you should eventually replace this with your own.
You could copy and paste this into a browser and you will get the results with the latitude and longitude:
So this is really what you need to know to do this through GH. Since gHowl has an XML parser component that can access files on the web, you should be able to use the same http call into this component.
Eventually, we get a response, and we need to grab the lat and lon data. With gHowl we can map these to xyz coordinates, and generate the heatmap...this is just a linear mapping:
Attached are both the Rhino file and the Grasshopper file, as well as the image underlay.
I am working on a series of components that makes this more straightforward, but for now, this should get you started.
…
and export the geometry out to VVVV to render it LIVE! RawRRRR. In this case, a digital audio workstation Ableton Live, a leading industrial standard in contemporary music production.
the good news is that VVVV and ableton live lite is both free.
https://www.ableton.com/en/products/live-lite/
i am not trying to use ipad as a controller for grasshoppper. I wanted to work with a timeline (similar to MAYA or Ableton or any other DAW(digital audio workstation)) inside grasshopper in an intuitive way. Currently there is no way of SEQUENCING your definition the way you want to see that i know of.
no more combersome export import workflows... i dont need hyperrealistic renderings most of the time. so much time invested in googling the right way to import, export ... mesh settings...this workflow works for some, for some not ...that workflow works if ... and still you cannot render it live nor change sequence of instruction WHILE THE VIDEO is played. and I think no one wants to present rhinoceros viewport. BUT vvvv veiwport is different. it is used for VJing and many custom audio visual installation for events, done professionally. you can see an example of how sound and visuals come together from this post, using only VVVV and ableton. http://vvvv.org/documentation/meso-amstel-pulse
I propose a NEW method. make a definition, wire it to ableton, draw in some midi notes, and see it thru VVVV LIVE while you sequence the animation the WAY YOU WANT TO BE SEEN DURING YOUR PRESENTATION FROM THE BEGINNING, make a whole set of sequences in ableton, go back change some notes in ableton and the whole sequence will change RIGHT INFRONT of you. yes, you can just add some sound anywhere in the process. or take the sound waves (sqaure, saw, whateve) or take the audio and influence geometric parameters using custom patches via vvvv. I cannot even begin to tell you how sophisticated digital audio sound design technology got last ten year.. this is just one example which isn't even that advanced in todays standard in sound design ( and the famous producers would say its not about the tools at all.) http://www.youtube.com/watch?v=Iwz32bEgV8o
I just want to point out that grasshopper shares the same interface with VVVV (1998) and maxforlive, a plug in inside ableton. audio mulch is yet another one that shares this interface of plugging components to each other and allows users to create their own sound instruments. vvvv is built based on vb, i believe.
so current wish list is ...
1) grasshopper recieves a sequence of commands from ableton DONE
thanks to sebastian's OSCglue vvvv patch and this one http://vvvv.org/contribution/vvvv-and-grasshopper-demo-with-ghowl-udp
after this is done, its a matter of trimming and splitting the incoming string.
2) translate numeric oscillation from ableton to change GH values
video below shows what the controll interface of both values (numbers) and the midi notes look like.
https://vimeo.com/19743303
3) midi note in = toggle GH component (this one could be tricky)
for this... i am thinking it would be great if ...it is possible to make "midi learn" function in grasshopper where one can DROP IN A COMPONENT LIKE GALAPAGOS OR TIMER and assign the component to a signal in, in this case a midi note. there are total 128 midi notes (http://www.midimountain.com/midi/midi_note_numbers.html) and this is only for one channel. there are infinite channels in ableton. I usually use 16.
I have already figured out a way to send string into grasshopper from ableton live. but problem is, how for grasshopper to listen, not just take it in, and interpret midi and cc value changes ( usually runs from 0 to 128) and perform certain actions.
Basically what I am trying to achieve is this : some time passes then a parameter is set to change from value 0 to 50, for example. then some time passes again, then another parameter becomes "previewed", then baked. I have seen some examples of hoopsnake but I couldn't tell that you can really control the values in a clear x and y graph where x is time and y is the value. but this woud be considered a basic feature of modulation and automation in music production. NVM, its been DONE by Mr Heumann. https://vimeo.com/39730831
4) send points, lines, surfaces and meshes back out to VVVV
5) render it using VVVV and play with enormous collection of components in VVVV..its been around since 1998 for the sake of awesomeness.
this kind of a digital operation-hardware connection is usually whats done in digital music production solutions. I did look into midi controller - grasshopper work, and I know its been done, but that has obvious limitations of not being precise. and it only takes 0 o 128. I am thinking that midi can be useful for this because then I can program very precise and complex sequence with ease from music production software like ableton live.
This is an ongoing design research for a performative exhibition due in Bochum, Germany, this January. I will post definition if I get somewhere. A good place to start for me is the nesting sliders by Monique . http://www.grasshopper3d.com/forum/topics/nesting-sliders
…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
as one element.
Thank you
Comment by karamba on October 7, 2014 at 11:27pm
Hello Patricio, divide the beams in such a way that each boundary vertex of the shell becomes an endpoint of a beam segment.
Best, Clemens
Comment by Llordella Patricio on October 8, 2014 at 8:30amDelete Comment
Hi Clemens,
I did what you suggested but now assemble element doesn´t work properly. Could you please tell me how to fix it? Thanks in advance, Patricio
8-10-14losa%20cadena.gh
Comment by karamba on October 8, 2014 at 11:59am
Hi Patricio, if you flatten the 'Elem'-input at the 'Assemble'-component the definition works. The triangular shell elements have linear displacement interpolations whereas the beam deflections are exact. In order to get correct results you should refine the shell mesh.
Best, Clemens
Comment by Llordella Patricio on October 9, 2014 at 8:35amDelete Comment
Hello, succeeds in creating the mesh to the slab, and built the beam segment, but when I see the deformations are not expected because the beam is deformed as the slab.
Thanks for the help
PS: maybe I'm using the program for a type of structure that is not the most appropriate, as I saw in the examples of other structures. But this type of structure is that students taught
best regards
Patricio
9-10-14%20Example%201.gh
Comment by karamba on October 9, 2014 at 10:46am
You could use the 'Mesh Edges'-component to retrieve the naked edges and turn them into beams - see attached file:91014Example1_cp.gh
Best regards,
Clemens
Comment by Llordella Patricio on October 15, 2014 at 3:41pmDelete Comment
Dear clemens
I was doing a rough estimate of the deformation, and I can not achieve the same result with Karamba. When I make a rough estimate of the result with Karamba beams and mine are very similar, I think the problem is when I connect the shell, because there are no similar results.
I sent the GH file, and an image of the calculation
The structure is concrete The result I get is 0.58cm
thank youPatricio
15-10-14%20Example.gh
Comment by karamba yesterday
Dear Patricio,
try to increase the number of shell elements. As mentioned in the manual they are linear elements. A mesh that is too coarse leads to a response which is stiffer than the real structure.
Best,
Clemens
…
n be obtained for curved NURBS surfaces as well as unconventional window configurations".
And I also noticed the following information form the optional input in the runEnergySimulation component.
"meshSettings_: Optional mesh settings for your geometry from any one of the native Grasshopper mesh setting components. These will be used to change the meshing of curved surfaces before they are run through EnergyPlus (note that meshing of curved surfaces is done since Energyplus is not able to calculate heat flow through non-planar surfaces). Default Grasshopper meshing is used if nothing is input here but you may want to decrease your calculation time by changing it to Coarse or increase your curvature definition (and calculation time) by making it finer".
1) My case is an one-story, rectangular-plan large hall (40m*70m*25m) with a curved roof. The roof surface is a part of a standard sphere and the walls and floor are all planar (the each wall has one curved edge as showed in the image).
For testing, I threw the original curved roof surface into daylight and energy simulations without making customized meshings, because I assumed that it might be automatically converted to meshs by Honeybee - Am I right? As showed in the image, how can I reduce the number of meshs in a proper way? Must two connected surfaces (i.e. wall and roof) be STRICTLY/SEAMLESSLY connected or not (considering different divisions of meshs in the respective surface)? - Is a connection tolerance allowed?
2) But, when I run the annual daylight simulation for this case, it gave me a lot of warnings "oconv: warning - zero area for polygon".- is that normal? and how to avoid this? Does the daylight simulation allow "curved NURBS surfaces"?
3) Moreover, when I run an energy simulation for this case, it costed extremely long time. It was just so long that I did not even have results out of one simulation. - I guessed it might be the problem caused by the curved roof surface (or automatic meshing?), but I don't have experience of converting a curved NURBS/spheral surface into correct meshs that can be recognized by Honeybee simulations (Daylight and Energy) in a proper way.
4) The large window on the wall was generated by the "_glzRatio". But the automatically generated wall meshs around this window are just too "fine", which might largely increase simulation time. Is there a proper way to get rid of it? (Considering that the size, shape and position of the window will have large influence on the daylight distribution in the building, it is worthy to keep the size, shape and position of the window as it should be in reality).
In sum, considering all above, could your please provide me some suggestions/tutorials/links that might be helpful for dealing with "curved NURBS surfaces" in Honeybee simulations.
Thank you all in advance!
Best,
Ding
…
ing the maps to the broader community.
At the moment, there are just a few known issues left that I have to fix for complex geometric cases but they should run smoothly for most energy models that you generate with Honeybee. Within the next month, I will be clearing up these last issues and, by the end of the month, there will be an updated youtube tutorial playlist on the comfort tools and how to use them.
In the meantime, there's an updated example file (http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map) and I wanted to get you all excited with some images and animations coming out of the design part of my thesis. I also wanted to post some documentation of all of the previous research that has made these climate maps possible and give out some much deserved thanks. To begin, this image gives you a sense of how the thermal maps are made by integrating several streams of data for EnergyPlus:
(https://drive.google.com/file/d/0Bz2PwDvkjovJaTMtWDRHMExvLUk/view?usp=sharing)
To get you excited, this youtube playlist has a whole bunch of time-lapse thermal animations that a lot of you should enjoy:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A
To give a brief summary of what you are looking at in the playlist, there are two proposed designs for completely passive co-habitation spaces in New York and Los Angeles.
These diagrams explain the Los Angeles design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJM0JkM0tLZ1kxUmc/view?usp=sharing)
And this video gives you and idea of how it thermally performs:
These diagrams explain the New York design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJS1BZVVZiTWF4MXM/view?usp=sharing)
And this video shows you the thermal performance:
Now to credit all of the awesome people that have made the creation of these thermal maps possible:
1) As any HB user knows, the open source engines and libraries under the hood of HB are EnergyPlus and OpenStudio and the incredible thermal richness of these maps would not have been possible without these DoE teams creating such a robust modeler so a big credit is definitely due to them.
2) Many of the initial ideas for these thermal maps come from an MIT Masters thesis that was completed a few years ago by Amanda Webb called "cMap". Even though these cMaps were only taking into account surface temperature from E+, it was the viewing of her radiant temperature maps that initially touched-off the series of events that led to my thesis so a great credit is due to her. You can find her thesis here (http://dspace.mit.edu/handle/1721.1/72870).
3) Since the thesis of A. Webb, there were two key developments that made the high resolution of the current maps believable as a good approximation of the actual thermal environment of a building. The first is a PhD thesis by Alejandra Menchaca (also conducted here at MIT) that developed a computationally fast way of estimating sub-zone air temperature stratification. The method, which works simply by weighing the heat gain in a room against the incoming airflow was validated by many CFD simulations over the course of Alejandra's thesis. You can find here final thesis document here (http://dspace.mit.edu/handle/1721.1/74907).
4) The other main development since the A. Webb thesis that made the radiant map much more accurate is a fast means of estimating the radiant temperature increase felt by an occupant sitting in the sun. This method was developed by some awesome scientists at the UC Berkeley Center for the Built Environment (CBE) Including Tyler Hoyt, who has been particularly helpful to me by supporting the CBE's Github page. The original paper on this fast means of estimating the solar temperature delta can be found here (http://escholarship.org/uc/item/89m1h2dg) although they should have an official publication in a journal soon.
5) The ASHRAE comfort models under the hood of LB+HB all are derived from the javascript of the CBE comfort tool (http://smap.cbe.berkeley.edu/comforttool). A huge chunk of credit definitely goes to this group and I encourage any other researchers who are getting deep into comfort to check the code resources on their github page (https://github.com/CenterForTheBuiltEnvironment/comfort_tool).
6) And, last but not least, a huge share of credit is due to Mostapha and all members of the LB+HB community. It is because of resources and help that Mostapha initially gave me that I learned how to code in the first place and the knowledge of a community that would use the things that I developed was, by fa,r the biggest motivation throughout this thesis and all of my LB efforts.
Thank you all and stay awesome,
-Chris…
erning how to do that on a sphere.
So I know already all the different approches of how to get a relaxed voronoi pattern on a free-form open surface, but still don't know how to obtain the same elegant effect on a sphere (or an ellipsoid closed surface, whatever), or how to relax the facet dome cells.
Andrew stated on his site that he used kangaroo for this project, so the Spore Lamp consists in my opinion either of a relaxed voronoi 3d diagram (b-rep, b-rep intersection) on a sphere the cells of which have been planarized later on, or more likely it is a sort of relaxed facet dome.
The trick is to:
1. obtain a nicely-balanced voronoish diagram (or facet dome cells) on a sphere
2. keep each cell/polyline planar (or force them with kangaroo to be planar) in order to move scale and loft them later on.
Here is what I have by now.(files: matsys spore lamp attempt)
That's the closest appearance that I got so far (simple move scale and loft of facet dome cells with the amount of transformations being proportional to the power of the initial cell area: bigger cell = bigger opening etc.) - with no relaxation of the diagram. But it's obviously not the same thing as the matsys design.
Here are some of my attempts of facet dome relaxation, but well, it's certainly still not the right approach, and most importantly I don't know how to keep or force the cells to be planar after the relaxation.
1. pulling vertices to a sphere - no anchor points. That obviously doesn't make sense at all, but the relaxation without anchor points gives at the beginning a pattern that is closer to what I am looking for. (files: relaxation 01)
2. pulling vertices to a sphere - two faces of the initial facet dome anchored (files: relaxation 02)
3. pulling vertices to the initial geometry (facet dome) no anchor points (files: relaxation 03)
The cell pattern of the lamp kinda looks like this:
You can find it here: http://www.grasshopper3d.com/forum/topics/kangaroo-0-095-releasedgroupUrl=kangaroo&x=1&groupId=2985220%3AGroup%3A120977&id=2985220%3ATopic%3A972434&page=2#comments
Done with Plankton (of course without the "gradient increase" appearance), but in fact not, I took a look at Daniel Parker's Plankton example files, and it's not quite the same thing. Also the cells aren't planar...
The last problem is that during the relaxation attempts that I did, the biggest initial cells became enormous, and it's not like that in the elegant project by Andrew Kudless, that I'd like to achieve.
So to sum up:
Goal no 1: Obtain an elegant voronoi /facet dome cell pattern on a sphere (or an ellipsoid surface, whatever).
Goal no 2: How to keep the cells planar in order to be able to loft them later, obtain those pyramidal forms, and assemble easily
Have you got any ideas? Or maybe there's a completely different approach to that?
Cheers, and thanks in advance…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…