se (like in nature). the length of the sticks shall be controlled by the brightnessvalues of a picture. so the bend have to be controlled, too.
now we have several problems:
1. how can i map a hexgrid on a curved surface?
2. how can i adapt the grid to the dimensions of the surface (no overlap, no gaps to the bound)?
3. important
: to create the curved sticks, we use points on a line and we move some of them and then we want to connect the right points via interpolated curve to create each curved stick. now the problem is that the points have to been filtered in the right way. we know that we have to filter each list of points to the index values of the points. the number of index values is the number of hexgrid rows, so there are a lot and we can't use a list item for each one. it could be hundreds.
is there any opportunity to sort a list after the index values (first every index=0, then index=1, ...n)?
or is there any component which does a group of operations for n-times (n is the flexible number of index values) ?
4. how can i control the length and bend of the sticks via the brightnessvalues of a picture?
please help us. thanks.
german version:
In einem hexagonalen Raster soll sich senkrecht zu Oberfläche ein Stab im Mittelpunkt jedes Sechsecks befinden. Dieser soll sich ab einem gewissen (festgelegten) Punkt Richtung Boden biegen. Zusätzlich wird die Länge des Stabes zum Beispiel durch die Information eines Bildes gesteuert, so dass auch die Biegung, je nach Länge, geregelt werden muss.
Wir haben ein Hexagonales Grid (HexGrid) erzeugt und in jeden Mittelpunkt eine Linie senkrecht zum Grid erzeugt, aus der wir uns Punkte mit CurvePoint ausgeben lassen. Der letzte ist verschoben, um eine Biegung zu simulieren. Um die Punkte zu einer interpolierten Kurve zu verbinden, müssen sie nach dem Index sortiert werden. Gibt es eine andere Möglichkeit, als jeden einzelnen Indexwert über ein ListItem herauszufiltern (Da die Rasterung flexibel einstellbar sein soll, entstehen n Indexwerte)? Oder kann man eine Liste nach den Indexwerten, also nicht nach den Punkten, sortieren?
Und wie kann man über Bildhelligkeitswerte die Länge der Stäbe und damit auch die Biegung steuern (ein kurzer Stab biegt sich weniger als ein langer Stab)?
Gibt es die Möglichkeit ein hexagonales Raster auf eine gekrümmte Fläche zu mappen?
Und wie passt man ein solches Raster (HexGrid) in eine Fläche mit definierten Maßen ein, ohne dass das Raster an den Rändern übersteht oder die Fläche nicht vollkommen ausfüllt?
danke.…
Added by doro hamann at 7:34am on December 20, 2011
nition. Using RenderAnimation component from http://www.giuliopiacentino.com/grasshopper-tools/, I could do all of above except for the Toon material part.
I have found a post regarding same matter ( http://www.grasshopper3d.com/forum/topics/how-to-add-materials-to-material-table ), but since I am not very familiar with scripts, this is what I think his definition does. Correct me if I am wrong.
Since Rhino Vray only supports Toon environment per material (unlike Max Vray has global override feature),
1. import toon material from Rhino material editor
2. add colors to the toon material and make new toon materials with color (as many as needed)
3. import that new materials back into grasshopper
4. match them with designated geometries and render. (RenderAnimation component by Giulio does this job) Here is the final work he did : http://vimeo.com/34728433
Grasshopper + Vray from Marc Syp on Vimeo.
I am using rhino 4 with vray 1.5.
I have uploaded my definition, simple definition that transforms box height along with color as frame advances. The definition works but toon effect is not there.…
bsp;
-Vehicle elements (3D objects and a component for custom vehicles; models from Google Warehouse)
-Traffic Velocity Graphs, drawn on every trajectory curve (allow custom graphs drawn)
-Traffic regulation elements (such as Traffic Lights and Stop Signals) and traffic density
-Particle Systems on trajectory curves, just to manage the traffic regulations and avoid collisions based on security distances
-Traffic Vehicle Animation Modes (Dots, Bounding Boxes or complex Meshes with attributes for final rendering (Giulio Piacentino´s Render Animation)
-Vehicle Lights and Vehicle Sights, to make visual studies
Team:
-Sergio del Castillo Tello (Doctor No, lead programmer)
-Everyone that wants to be involved, support.. these tools
The development of Roadrunner is planned to take part within a Research Group Program at ETSAM (University of Architecture in Madrid); This forum group is created just to test the interest of the community, while we keep on developing (it is still being tested), probably we will share the whole thing in the future. Cheers!
Traffic Cluster Scheme
Traffic Elements
Traffic Urban Systems
Vehicle Elements
Roadrunner - overview
Roadrunner 0 Basics
Roadrunner 1 Modes
Roadrunner 2 Elements
Roadrunner 3 Urban Systems…
me of the dimensions that changed ( become Diagonal after they were Vertical or Horizontal)
I sometime use Record History in rhino for saving time, but when I change some points of curves or trim curves , I have problems with dimensions (see the two pictures below).
Problem 2 :
After trimming , only two dimensions should be changed depending on their place in changed curves . But what happens is that all the dimensions become crazy!!!!!!
I always use Aligned dimension in rhino. Now I know that dimensionsdo not exist in grasshopper. So I ask you if we have expertise in BV , C#, can we create a script for dimensions or is it impossible ??
If we can , I only need Aligned dimension.
I hope that I find or create a script that can define all points: start and end of curve ribs and create dimensions from grasshopper to rhino directly with or without the ability to change automatically .
Thank you
…
,with OpenfoamV1612+ in Windows 10 64bit.The blockmesh worked good.And the snappyhexmesh crashed in the process.My computer memory is not enough? Or some settings wrong?Could you help me solve this question?/---------------------------------------------------------------------------| ========= | || \ / F ield | OpenFOAM: The Open Source CFD Toolbox || \ / O peration | Version: v1612+ || \ / A nd | Web: www.OpenFOAM.com || \/ M anipulation | |*---------------------------------------------------------------------------*/Build : v1612+Exec : snappyHexMeshDate : Aug 27 2017Time : 09:39:54Host : "default"PID : 13443Case : /home/ofuser/workingDir/butterfly/outdoor_airflownProcs : 1sigFpe : Enabling floating point exception trapping (FOAM_SIGFPE).fileModificationChecking : Monitoring run-time modified files using timeStampMaster (fileModificationSkew 10)allowSystemOperations : Allowing user-supplied system call operations
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //Create time
Create mesh for time = 0
Read mesh in = 2.14 s
Overall mesh bounding box : (-241.5472 -241.4418 0) (496.4376 536.2438 144.8633)Relative tolerance : 1e-06Absolute matching distance : 0.001081851
Reading refinement surfaces.Read refinement surfaces in = 0.01 s
Reading refinement shells.Refinement level 3 for all cells inside around_buildings_area.stlRead refinement shells in = 0 s
Setting refinement level of surface to be consistent with shells.For geometry outdoor_airflow.stl detected 0 uncached triangles out of 120Checked shell refinement in = 0 s
Reading features.Read features in = 0 s
Determining initial surface intersections
Edge intersection testing:Number of edges : 1684728Number of edges to retest : 1684728Number of intersected edges : 5583Calculated surface intersections in = 1.68 s
Initial mesh : cells:554112 faces:1684728 points:576779Cells per refinement level:0 554112
Adding patches for surface regions
Patch Type Region
outdoor_airflow:
6 wall buildings
Added patches in = 0.03 s
Edge intersection testing:Number of edges : 1684728Number of edges to retest : 0Number of intersected edges : 5583Selecting decompositionMethod none
Refinement phase
Found point (127.4452 147.401 72.43167) in cell 402042 on processor 0
Surface refinement iteration 0
Marked for refinement due to surface intersection : 8820 cells.Determined cells to refine in = 3.87 sSelected for refinement : 8820 cells (out of 554112)Edge intersection testing:Number of edges : 1883850Number of edges to retest : 250376Number of intersected edges : 21198Refined mesh in = 1.77 sAfter refinement surface refinement iteration 0 : cells:615852 faces:1883850 points:652499Cells per refinement level:0 5452921 70560
Surface refinement iteration 1
Marked for refinement due to surface intersection : 38502 cells.Determined cells to refine in = 0.04 sSelected for refinement : 40392 cells (out of 615852)Edge intersection testing:Number of edges : 2787132Number of edges to retest : 1118049Number of intersected edges : 85655Refined mesh in = 3.17 sAfter refinement surface refinement iteration 1 : cells:898596 faces:2787132 points:990317Cells per refinement level:0 5432351 486812 306680
Surface refinement iteration 2
Marked for refinement due to surface intersection : 159213 cells.Determined cells to refine in = 0.1 sSelected for refinement : 168471 cells (out of 898596)Edge intersection testing:Number of edges : 6576117Number of edges to retest : 4737635Rhino Model and GH files is in t'he zip file.Please help me solve this question!~~…
rtitions." (http://wias-berlin.de/software/index.jsp?id=TetGen&lang=1)
To continue with my wrapping career, TetRhino (or Tetrino) is a .NET wrapper for the well-known and pretty amazing TetGen mesh tetrahedralization program. It provides one new GH component for discretizing or remeshing objects using TetGen. Basic tetrahedralization functionality is exposed with a few different output types that can be controlled. At the moment, the only control for tetrahedra sizes is the minimum ratio, which is controlled by a slider. This is hardcoded to always be above 1.0-1.1, as it is very easy to generate a LOT of data (and crash)...
The libs are divided again into different modules to allow flexibility and fun with or without Rhino and GH, so have fun. All 4 libs should be placed in a folder (maybe called 'tetgen') in your GH libraries folder. Remember to unblock.
Once again, the libs are provided as-is, with no guarantee of support for now, as I use them internally and do not intend to develop this into a shiny, polished plug-in. If there is enough interest, I can tidy up the code-base and upload it somewhere if someone more savvy than me wants to play.
TetgenGH.gha - Grasshopper assembly which adds the 'Tetrahedralize' component to Mesh -> Triangulation.
TetgenRC.dll - RhinoCommon interface to the Tetgen wrapper.
TetgenSharp.dll - dotNET wrapper for Tetgen.
TetgenWrapper.dll - Actual wrapper for Tetgen.
Obviously, credit where credit is due for this excellent and tiny piece of software:
"The development of TetGen is executed at the Weierstrass Institute for Applied Analysis and Stochastics in the research group of Numerical Mathematics and Scientific Computing." See http://wias-berlin.de/software/index.jsp?id=TetGen&lang=1 for more details about TetGen.
To wrap up, some notes about the inputs:
These are the possible integer Flags (F) values and resultant outputs for the GH component:
0 - Output M yields a closed boundary mesh. Useful for simply remeshing your input mesh.
1 - Output M yields a list of tetra meshes.
2 - Output I yields a DataTree of tetra indices, grouped in lists of 4. Output P yields a list of points to which the tetra indices correspond.
3 - Output I yields a DataTree of edge indices, grouped in lists of 2. Output P yields a list of points to which the edge indices correspond. Useful for lots of things, very easy to create lines from this to plug into K2 or something for some ropey FEA (or not so ropey!) ;)
As this component can potentially create a LOT of data, especially with dense meshes, care should be taken with the MinRatio (R) input. This will try to constrain the tetra to be more or less elongated, which also means that the lower this value gets, the more tetra need to be added to satisfy this constraint. Start with very high values and lower them until satisfactory.
Hopefully shouldn't be an issue, but it's possible that you need the 2015 Microsoft C++ Redistributable.
Happy tetrahedralizing...
UPDATE: The tetgen.zip has been updated with some fixes.
UPDATE2: This is now available on Food4Rhino: http://www.food4rhino.com/app/tetrino
…
Added by Tom Svilans at 1:27am on October 24, 2017
lass BrepDeform Inherits GH_Component Public Reslist As New List(Of String) Public Sub New() MyBase.New("BrepDeform", "Deform", _ "移动物件的控制点" & vbCrLf & "(Move the control Point to change a object)", "SEG", "Modify")
End Sub Public Overrides ReadOnly Property ComponentGuid As System.Guid Get Return New Guid("8226e0ea-ed6b-47c2-8a24-244f044152d8") End Get End Property Protected Overrides ReadOnly Property Internal_Icon_24x24() As System.Drawing.Bitmap Get Return My.Resources.SEG_BrepDeform End Get End Property Protected Overrides Sub RegisterInputParams(ByVal pManager As GH_Component.GH_InputParamManager) ' pManager.AddTextParameter("Guid", "Id", "将要被替换的犀牛物件" & vbCrLf & "(RhinoObjects that will be replaced)", GH_ParamAccess.item) 'Dim guidParam As New Param_Guid pManager.AddParameter(New Param_Guid, "Guid", "Id", "将要被替换的犀牛物件" & vbCrLf & "(RhinoObjects that will be replaced)", GH_ParamAccess.item) pManager.AddPointParameter("ControlPoint3d", "C", "控制点的位置" & vbCrLf & "(Control Point's location)", GH_ParamAccess.item) pManager.AddPointParameter("NewPoint3d", "P", "新控制点的位置" & vbCrLf & "(New Control Point's location)", GH_ParamAccess.item) pManager.AddNumberParameter("Tolerace", "T", "输入点与物件实际控制点对比的精度" & vbCrLf & "(Tolerace for the Control Point match)", GH_ParamAccess.item, 0.1)
pManager.AddBooleanParameter("BlMove", "M", "如果是True则进行移动" & vbCrLf & "(If true Perform the Move)", GH_ParamAccess.item, False)
End Sub Protected Overrides Sub RegisterOutputParams(ByVal pManager As Kernel.GH_Component.GH_OutputParamManager) pManager.AddTextParameter("Result", "RG", "结果列表" & vbCrLf & "(Result)", GH_ParamAccess.list) End Sub Public Overrides ReadOnly Property Exposure As GH_Exposure Get Return GH_Exposure.primary End Get End Property
Protected Overrides Sub SolveInstance(ByVal DA As Kernel.IGH_DataAccess) If Banner.astrict.showmessage Then Return Dim Ids As Guid = Guid.Empty 'Dim Ids As String = String.Empty Dim tpt As Point3d = Point3d.Unset, opt As Point3d = Point3d.Unset Dim tolar As Double = 0.1 Dim blMove As Boolean = False If Not DA.GetData(0, Ids) Then Return If Not DA.GetData(1, opt) Then Return If Not DA.GetData(2, tpt) Then Return If Not DA.GetData(3, tolar) Then Return If Not DA.GetData(4, blMove) Then Return If Not blMove Then GoTo line1 Reslist.Add(Now & "_未替换!(Replace failed!)") Else Reslist.Clear() ' Grasshopper.Instances.ActiveCanvas.ModifiersEnabled = False End If
' rt.AddRange(docobjlist.Select(Function(geoobj As RhinoObject) GH_Convert.ObjRefToGeometry(New ObjRef(geoobj.Id)))) 'Private Checked(5) As Boolean, Namestr() As String = {"Point", "Curve", "Brep", "Mesh", "TextDot", "TextEntity"}
Try
Dim rh As RhinoDoc = Rhino.RhinoDoc.ActiveDoc Dim rhobj As RhinoObject = rh.Objects.Find(Ids) ' Dim rhobj As RhinoObject = rh.Objects.Find(New Guid(Ids))
Dim bobj As BrepObject = CType(rhobj, BrepObject) RhinoApp.RunScript("Cancel", False) RhinoApp.RunScript("Cancel", False) bobj.Select(True)
RhinoApp.RunScript("_SolidPtOn", False) Dim gobjs As GripObject() = bobj.GetGrips ' rh.Views.RedrawEnabled = False For Each grpobj As GripObject In gobjs
If grpobj.CurrentLocation.DistanceTo(opt) < tolar Then grpobj.Select(True) Dim CurrentPln As Plane = RhinoDoc.ActiveDoc.Views.ActiveView.ActiveViewport.ConstructionPlane Dim tropt As New Point3d(opt), trtpt As New Point3d(tpt) tropt.Transform(Transform.PlaneToPlane(Plane.WorldXY, CurrentPln)) trtpt.Transform(Transform.PlaneToPlane(Plane.WorldXY, CurrentPln))
Dim movestr As String = "_move " + String.Format("{0},{1},{2} ", tropt.X, tropt.Y, tropt.Z) + String.Format("{0},{1},{2} _Cancel _Cancel", trtpt.X, trtpt.Y, trtpt.Z) RhinoApp.RunScript(movestr, True) grpobj.Select(False) End If
Next
'RhinoApp.RunScript("Cancel", False) 'RhinoApp.RunScript("Cancel", False) '' rh.Views.RedrawEnabled = True Reslist.Add(Now & "_替换成功!(Replace Success!)") Catch ex As Exception Reslist.Add(Now & "_替换失败!(Replace failed!)" & vbCrLf & ex.Message)
End Try ' Grasshopper.Instances.ActiveCanvas.ModifiersEnabled = True
line1: DA.SetDataList(0, Reslist) End Sub
'Private Sub Testt_PingDocument(sender As IGH_DocumentObject, e As GH_PingDocumentEventArgs) Handles Me.PingDocument ' Dim Mbool = Aggregate bcbool In Checked Into cb = Any(bcbool)
' If Not Mbool Then ' Checked(0) = True ' Message = Namestr(0) ' Order = 0 ' End If 'End Sub
End Class
The picture below shows the two question.
Question One I must use data dam, or the component can't batch deal the brep. I don't know why, I have You can give me a solution to make it working normal not using the data dam
Question Two I can not uset the Button component, If I use it, the gh canvas will die with some mouse event--. I have see this problem before in this forum,but there is no solution and explain. I want to know why and How to solve it.
I don't know if I have made my question clear,if not give a message. Thank you! Thank you all.
The gh test file and 3dm test file in the upload files.
…
t. So here we go!
1. Honeybee is brown and not yellow [stupid!]...
As you probably remember Honeybee logo was initially yellow because of my ignorance about Honeybees. With the help of our Honeybee expert, Michalina, now the color is corrected. I promised her to update everyone about this. Below are photos of her working on the honeybee logo and the results of her study.
If you think I'm exaggerating by calling her a honeybee expert you better watch this video:
Thank you Michalina for the great work! :). I corrected the colors. No yellow anymore. The only yellow arrows represent sun rays and not the honeybee!
2. Yellow or brown, W[here]TH Honeybee is?
I know. It has been a long time after I posted the initial video and it is not fun at all to wait for a long time. Here is the good news. If you are following the Facebook page you probably now that the Daylighting components are almost ready.
Couple of friends from Grasshopper community and RADIANCE community has been helping me with testing/debugging the components. I still think/hope to release the daylighting components at some point in January before Ladybug gets one year old.
There have been multiple changes. I finally feel that the current version of Honeybee is simple enough for non-expert users to start running initial studies and flexible enough for advanced users to run advanced studies. I will post a video soon and walk you through different components.
I think I still need more time to modify the energy simulation components so they are not going to be part of the next release. Unfortunately, there are so many ways to set up and run a wrong energy simulation and I really don’t want to add one new GIGO app to the world of simulation. We already have enough of that. Moreover I’m still not quite happy with the workflow. Please bear with me for few more months and then we can all celebrate!
I recently tested the idea of connecting Grasshopper to OpenStudio by using OpenStudio API successfully. If nothing else, I really want to release the EnergyPlus components so I can concentrate on Grasshopper > OpenStudio development which I personally think is the best approach.
3. What about wind analysis?
I have been asked multiple times that if Ladybug will have a component for wind study. The short answer is YES! I have been working with EFRI-PULSE project during the last year to develop a free and open source web-based CFD simulation platform for outdoor analysis.
We had a very good progress so far and our rockstar Stefan recently presented the results of the work at the American Physical Society’s 66th annual DFD meeting and the results looks pretty convincing in comparison to measured data. Here is an image from the presentation. All the credits go to Stefan Gracik and EFRI-PULSE project.
The project will go live at some point next year and after that I will release the Butterfly which will let you prepare the model for the CFD simulation and send it to EFRI-PULSE project. I haven’t tried to run the simulations locally yet but I’m considering that as a further development. Here is how the component and the logo looks like right now.
4. Teaching resources
It has been almost 11 months from the first public release of Ladybug. I know that I didn't do a good job in providing enough tutorials/teaching materials and I know that I won’t be able to put something comprehensive together soon.
Fortunately, ladybug has been flying in multiple schools during the last year. Several design, engineering and consultant firms are using it and it has been thought in several workshops. As I checked with multiple of you, almost everyone told me that they will be happy to share their teaching materials; hence I started the teaching resources page. Please share your materials on the page. They can be in any format and any language. Thanks in advance!
I hope you enjoyed/are enjoying/will enjoy the longest night of the year. Happy Yalda!
Cheers,
-Mostapha
…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…