curve or locus] of a segment AB, in English. The set of all the points from which a segment, AB, is seen under a fixed given angle.
When you construct l'arc capable —by using compass— you obviously need to find the centre of this arc. This can be easily done in GH in many ways by using some trigonometry (e.g. see previous —great— solutions). Whole circles instead of arcs provide supplementary isoptics —β-isoptic and (180º-β)-isoptic—. Coherent normals let you work in any plane.
Or you could just construct β-isoptics of AB by using tangent at A (or B). I mean [Arc SED] component.
If you want the true β-isoptic —the set of all the points— you should use {+β, -β} degrees (2 sides; 2 solutions; 2 arcs), but slider in [-180, +180] degrees provides full range of signed solutions. Orthoptic is provided by ±90º. Notice that ±180º isoptic is just AB segment itself, and 0º isoptic should be the segment outside AB —(-∞, A] U [B, +∞)—. [Radians] component is avoidable.
More compact versions can be achieved by using [F3] component. You can choose among different expressions the one you like the most as long as performs counter clockwise rotation of vector AB, by 180-β degrees, around A; or equivalent. [Panel] is totally avoidable.
Solutions in XY plane —projection; z = 0—, no matter A or B, are easy too. Just be sure about the curve you want to find the intersection with —Curve; your wall— being contained in XY plane.
A few self-explanatory examples showing features.
1 & 5 1st ver. (Supplementary isoptics) (ArcCapableTrigNormals_def_Bel.png)
2 & 6 2nd ver. (SED) (ArcCapableSED_def_Bel.png)
3 & 7 3rd ver. (SED + F3) (ArcCapableSEDF3_def_Bel.png)
4 & 8 4th ver. (SED + F3, Projection) (ArcCapableSEDProjInt_def_Bel.png)
If you want to be compact, 7 could be your best choice. If you prefer orientation robustness, 5. Etcetera.
I hope these versions will help you to compact/visualize; let me know any feedback.
Calculate where 2 points [A & B] meet at a specific angle is just find the geometrical locus called arco capaz in Spanish, arc capable in French (l'isoptique d'un segment de droite) or isoptic [curve or locus]
of a segment AB, in English. The set of all the points from which a segment,
AB, is seen under a fixed given angle.…
ity...? How to define this parameters and simulate them? How to simulate and evaluate form? How to work with Evolutionary Solver inside Grasshopper3d? How to evaluate end data and choose the fittest geometry? How to optimize geometry to increase overall energy efficiency of project!?
»»» Rhinoceros 5 + Grasshopper 3D & Sub-Plugins *required grasshopper plugins: Elk, LadyBug + Honeybee, Mesh edit (uto tools), Mesh+, Weaverbird, Human, TT Toolbox, Lunchbox, Horster tools, Exoskeleton & Cytoskeleton
>>>Please download and install Rhino + GH3D & Sub-Plugins before workshop start!<<<
with Igor Mitrić
DIGITAL FABRICATION BASICS - 3D SCANNING AND 3D PRINTING
Workshop would provide overview of current state of technologies for 3D scanning and 3D printing with those affordable and practical devices for research and development new design projects. Attendees would use 3D scanner to generate 3D model in virtual computer space, remodel, and prepare for 3D printer.
with Roberto Vdović
OPTIONAL FIELD TRIP - ON SITE ENERGY MEASUREMENTS (19.6.2015)
with Benedikt Borišič and Veronika Madritsch
Participants will receive CERTIFICATES of knowledge acquired at the workshop for each section. Participation is FREE! The number of places is LIMITED!
MORE INFORMATION AND APPLICATION WWW.LIVECONST.EU
WORKING SCRITPS
Day 1 City.gh
Day 2 Lady Bug.gh
Day 3 Galapagos
Record Galapagos.gh
Day 3_First Half.gh
Day 3 Second Half.gh
Tower from any Curve.gh
…
three categories, each one corresponding to different shapeType_ input:- polygons (shapeType_ = 0): anything consisted of closed polygons: buildings, grass areas, forests, lakes, etc
- polylines (shapeType_ = 1): non closed polylines as: streets, roads, highways, rivers, canals, train tracks ...- points (shapeType_ = 2): any point features, like: Trees, building entrances, benches, junctions between roads... Store locations: restaurants, bars, pharmacies, post offices...
So basically when you ran the "OSM shapes" component with the shapeType_ = 2, you will get a lot of points. If you would like to get only 3d trees, you run the "OSM 3D" component and it will create 3d trees from only those points which are in fact trees. You can also check which points are trees by looking at the exact location on openstreetmap.org. For example:
Or use the "OSM Search" component which will identify all trees among the points, regardless of whether 3d trees can be created or not.However, when it comes to 3d trees there is a catch:
Sometimes the geometry which Gismo streams from OpenStreetMap.org does not contain a "height" key. Or it does contain it but the value for that key is missing.OpenStreetMap is free editable map database, so anyone with internet access and free registered account on openstreetmap.org can add features (like trees) to the map database. However, regular people sometimes do not have height measuring devices which are needed for specific objects as trees.So "OSM 3D" component will generate 3d trees from only those tree points which contain a valid "height" key.However, a small workaround is to input a domain(range) into the randomHeightRange_ input of "OSM 3D" component (for example the following one: "5 to 10"):
This will result in creation of other 3d trees which do not have defined height, by randomizing their height. randomHeightRange_ input can also be applied to 3d buildings, and it is definitively something I need to write a separate article on.
In the end it may be that nobody mapped the trees in the area you are looking for.
After you map a tree to openstreetmap.org then it will instantly be available to you or any other user of Gismo. I will be adding some tutorials in the future on how this can be done. But probably not in the next couple of weeks.
Let me know if any of this helps, or if I completely misunderstood your issue.…
Added by djordje to Gismo at 3:52am on February 8, 2017
n due at the end of march. i am hoping to see if i can do this as a sort of "HIVE MIND" experiment with one or two or more posters to the forum. i have uploaded two files to http://www.formpig.com/nine_bar-FAR and I have the following goals:
1. To "kinematically iterate" various formal building envelopes based upon a 50' x 100' lot that "conform" to the nine bar linkage geometry.
2. This lot would have "setbacks" consisting of two 5' side setbacks, a 10' rear yard setback and a 25' front yard setback. max height on the structure is 32' and the allowable overhangs into the setbacks are 2'. I would like to find a way to use the "nine bar geometry" to construct a series of iterations for "floors", "walls" and "ceilings", which would then be tied to a volumetric (cubic volume), or a total square footage (perhaps based upon two horizontal section cuts) which was based upon a given number that I will provide per local building code.
3. Laid on top of this we would also have "mcmansion ordinance" requirements based upon the pdf enclosed. i expect to have this "tent restriction" data in digital form to upload to ftp shortly.
It would be up to you individually or collectively to determine how best to position this "in the real world" based upon the lot, setbacks, zoning requirements etc. For instance, perhaps the nine bar configuration has its vertices coplanar with the 50' x 100' x 32' envelope restrictions and then the chosen volume is "trimmed' by the setback requirements. Or perhaps the nine-bar configuration is generated completely within the setbacks, or perhaps it is generated 2' outside of the setbacks so as to take advantage of the 2' overhang allowance on the setbacks, etc.
*
Given an opportunity to develop the work in a second phase we would have an opportunity to tie this into various efficiencies such as Bill of Materials (wall floor and ceiling square foot calculations), envelope to volume calculations, solar panel efficiencies (solar orientation and envelope geometry) etc, etc (love to get suggestions for this).
*
I've become /really/ convinced that this would be a /really/ interesting entry based upon my just finishing up Kas Oosterhuis' Towards a New Kind of Building: A Designer's Guide for Non-Standard Architecture". In an ideal world I was hoping that it would be possible to hash this out discussion-wise and then literally passing it around on the list after someone eventually made the first move by tossing out a rough ghx script. My expectation would be to finalize it rapidly in the next two weeks. Something of a contemporary version of a design charette.
However, I realize this may not be workable so if you have experience in this arena and particularly if you think this is a brief that is straighforward enough to be almost literally implemented in Grasshopper, please contact me for any wage and/or contract fee requirements.
I'm getting a bit of a late jump on this but my hope is that with the right participant(s) that I can thrash it together quick enough for the first round.
info@formpig.com…
case for sure (started by Giorgio a couple of days before). Ive got involved because I exploit ways to "relax" shapes on nurbs (say patterns created by Lunchbox or "manually) without using any kind of mesh (more explanations soon).
Here's 5 test cases (SDK appears that doesn't have some "thicken surface" thing ... thus the algo that finds the "whole" shapes is rather naive) VS 2 Kangaroo "methods" and the why bother (he he) option as well.
If the goal is to "fit" these shapes within the nurbs ... does it work so far? No I'm afraid (appears that "springs" used are not the proper ones - or [Kangaroo1 option] the lines that pull should been originated from valance 2 points only)
Tricky points:
1. Internalize appears having a variety of serious issues (see Input inside definition) - Load Rhino file first (but even so ...).
2. Pull to surface is deactivated - this is not the issue here (and it's very slow).
3. Since Starling/WB alter the "curves - points" related order
the issue here (Pull points to curves) is to correspond apples to apples:
and that's what Anemone does:
From chaos :
to order:
this means that prior activating Kangaroo you should double click to the Anemone start component in order to "sort" properly the curves.
But .. fact is that results are pathetic:
more soon
best, Peter…
ing results and I think it is based on the assumption of small displacements. That’s why I want to try with LaDeform.
But doing this I met some problems. I tried to experiment it on the small examples that are provided with Karamba:
1.LaDeform in load-controlled behavior
I know Karamba has mainly been created make form-finding and not properly precise calculations, but I’d like to evaluate deformations of my structure under certain loads (load-controlled). It is said to let it in Default value for MaxDisp (-1).
[Rhino view for deflection of the rope]
In this example derived from a Karamba example (Large_Deformation_Rope.gh), the programs shows different ways to get approximately equal max deflection. But, getting into it, I realized Load Multiplier for gravity is different from one model to another (-3.237 for Analyze TH1 and -134 for LaDeform). So what is the interest of the example if the quite similar shape of deflections are not got under the same loadings? (quite different loadings indeed)
Doesn’t it show on the contrary that LaDeform algorithm does not work properly, if you need to change the load multiplier?
The Grasshopper file is shown below.
2.MaxDisp
When I use the model is “max disp”, I command the deformation, but how can I get the value of the virtual force exerted (which I don’t know because it is now imposed)? What is its link with the imposed deflection?
Otherwise I can’t figure how to use it with displacement-controlled loading
3.Iterative process
As it seems impossible to use LaDeform process, I tried to test it by iterations, as you recommend it on the forum, saying that it is equivalent to an iterative Analyze Th1 process.
I tried to reproduce this loading but the result is not very enthusiastic as you can see. The Rhino file shows the progressive loading, with the corresponding Grasshopper files, where I
- disassemble the model,
- get the previous deformed model
- put in another part of the load,
- re-assemble and then calculate it on the previous deformed shape.
Do you have any idea why the answer is not the same ? (LaDeform seem to give like 5 times less for the same loadings) (and even controlling it by displacements the shapes do not fit the principle of the algorithm would let think)
[RhinView for Iterative process]
First step by analyze Th1, and result by LaDeform
4.Analyze Th1 after LaDeform?
Some tutorials of Karamba show that an analysis with Analyze Th1 is sometimes made immediately after a calculation in large deformations. What is its reason? It seems to sometimes change considerably the result. What is the sense of such an operation? Would it mean that LaDeform is not trustworthy?
ð My question is then: is there a way to make the use of LaDeform for other purposes than form-finding affordable and coherent? If I mistake using it, where?
Thank you very much for your help,
…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…