at the same time just seems logical to me that a force would always seek the path of least resistance, so rather than making a 90 degree turn follow a more similar direction. The thought of separating stresslines into groups of tension and compression ist interesting from a design perspective. I wondered how tension and compression forces relate to the S1 and S2 lines, so what I did is pluging the outputs of P1 and P2 into the respective vector display for S1 and S2 and coloring the vectors blue for compression (negative values) and red for tension (positive values). So when you look at the upper side of the surface S1 (SC_02), Tensors along S1 show compression towards the middle and towards the supports Tension. However the Principal Stress Display of the Mesh Visualisation Component for the upper side shows it the other way round, again Red/ Tension and Cyan/ Compression as it says in your manual. Did I miss out on something ? When I look at the lower side (SC_03) I find it more or less matching up (I am just decerning between negative and positive values) so that might make the difference in the size of the compression area. So, does this mean that the S1 and S2 lines are related to the upper and lower side of the surface ? One beeing predominantely in compression(upper side) and one being stressed(lower side) ? That would also explain to me why S1 and S2 swap when you change the side of the surface. I am sorry, many questions... If you have time to explain, would be great. Also, maybe you have a book or article in mind which would explain those things more in depth....
Many thanks,
Philipp…
returned to GSA, it is solving. You might have to reset result scales using the GSA button.
Cheers,
Jon
Checking Input Data - this may take some time.
________________________________________
Data checks commenced at 23/08/2017 4:59:18 PM.
Checking input data for static analysis by GSS.
Shortest element (element 9) is 5 m long.Longest element (element 1) is 6 m long.
Data checks completed at 23/08/2017 4:59:18 PM. No errors or warnings found.
Analysis commenced at 23/08/2017 4:59:18 PM.
Analysis by Gss Static analysis
Initialising results modulesSolving for displacementsSolution statisticsSparse Parallel Direct 12 active nodes 14 active elements 2 analysis cases 24 degrees of freedom Minimum degree ordering 90 terms in stiffness matrix Maximum stiffness is 4.804e+009 at node 4 in direction z Minimum stiffness is 3.132e+008 at node 2 in direction yy Condition number of the stiffness matrix is ~ 5328. Maximum relative error in displacements will be 2.4e-10 percent. Factorization in 109 msSolving for element forces and reactionsCalculation completeAnalysis completed with no errors
Analysis completed at 23/08/2017 4:59:18 PM.Analysis time: 0.172 seconds
…
ted a picture of in your post. The reason is that sound has larger wavelengths than light.
With a light rendering model, energy can be said to reflect specularly, relative to their geometry, because the wavelength of light is inifinitesimally small relative to any object you might have modelled. With sound, energy may travel and reflect diffusely, or move around objects, depending on the scale of those objects. Think of the fundamental equation of frequency to wavelength - speed of sound = frequency X wavelength. Using that, you can see that a wave in the 125 hz octave is about as tall as a human being (or maybe a little taller) and would easily move around your body, not being reflected at all. A wave in the 1000 Hz. octave band is as big as your forearm, and might reflect specularly from your torso. A wave in the 4000 hz. octave band is about as long as your index finger, and might reflect off of your torso, or even your head.
Similarly, if you were to model the seats explicitly, it might be relatively accurate at very high frequencies (say 4000 hz. and above) but that is a very small part of the answer. Consensus in the field is that the most accurate way to model the seats is with a flat plane, raised to about shoulder height, and then with scattering coefficients applied to represent the varying effects of geometry on sound. I tend to use low coefficents below 250 hz. (say around 30%) and high coefficents above 250 Hz.(90%).
Absorption depends on the seat which was chosen. This is often a good area to use for a model calibration based on measured reverberation time.
Arthur…
ces are distorted (second). What is going on?
Surfaces in the second are a rhino cage edit of the surfaces in the first image. They were originally all closed polysrfs exploded just to input into grasshopper.
In the definition attached, each surface is compared to an original (its the small box in the far left of the top image) The point there is the ability to select for more than just the 6 faces of a cube, but find the closest match to more complicated inputs. In the second image, distorted surfaces are being compared to a distorted original.
If I have my math right, two parallel unitized normal vectors should have a dot product of 1, and the further away from 1 their dot product the further away from parallel, no? Why does it fail when I leave the comfy land of 90 degrees?…
Added by Peter Stone at 2:39pm on January 28, 2015
e to constrains, I HAVE to do it like this (I can't 3D print everything or opposite).
First
I have no idea how to make the panels, without so many duplicate Edges, Faces etc.
Second
I can't figure out how to align the triangle panels to fit in the construction, so it can be assembled ideally without glue. This problem is both conceptual (I can't figure out how to do it fiscally) and grasshoper-wise - I don't know how to organize data list and produce a global movement, so that the triangle parts do not intersect with each other, BUT intersect the 3d printed construction part (where they fit fix in or just fit and can be glued).
Triangles will be milled out from 3mm Plexiglas, BUT I will not have an option to mill at an angle, so only 90° edges.
3D printed parts will be executed by a high level production powder printer, so it should hold good.
Any ideas?
best,
cuki
…
File) 2. I have designed a curved Trichordal-Truss from one curve in Rhino.
The Truss is lying in the XY direction and the footer is placed on the zero point.
3. And now my problem:
I want to put the Truss-object on the feet, move 90°
(from the XY axis to Z axis, see sketch 1).
4. Then copy / move the truss to all 36-points of ellipse (see sketch 1).
5. Align the 36 trusses with the center of the triangle .
pointing at the center of the ellipse (see sketch 2).
6. Using a slider to change the position of the 36-Trusses at der ellipse.
Variable distance between Truss and ellipse (see sketch 3).
Thanks for you Answer.
Best regards
Noureddine…
multiply of variants from Galapagos, to have a chance for better analysis and comparability after. I also would like to use more then one solution in my design after.
In old topics i found kind of 3 solutions.
1.Change Galapagos to octopus ( what don t really want to do, i am kind of happy with Galapagos)
2. Use Slingshot! and MySQL Database ( it s look a little bit too complicated from the first view)
3. Use Colibri and Design Explorer Platform (looks kind of pretty way to solve my problem)
So i tried to add Colibri components to my definition , but have some mistake in the Colibri Aggregator after adding the Genome "An item with the same key already been added". I think it comes because for some steps i am using the "Gen Pool" and not a normal slider. Is it a way to connect Gen Pool and Colibri (i really prefer to have it, then a lot of sliders in some cases)?
And the second question (if i will get it solved with gen pool), could i somehow controll the recording process? For example i would likte to record only variants wit fitness over 90% or start recording just after 20. generation and record till the end?
I also opend for all other possibilities to reach the same goal (record/save/bake multiply variants from galapagos)
…
rld.wolfram.com/EnnepersMinimalSurface.html
when i type the equations for z,y,z it says a syntax error so i obviously do not understand how to construct an expression. (screen capture attached)
Any help/explanation of using this function would be greatly appreciated
thanks so much
Capture.JPG…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…