oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.samilolab.it…
22 (parametric design)
July 26-27-28-29 (digital fabrication)
The third edition of digitalMed Workshop is structured as a design laboratory. Participants will learn the challenging process of producing ideas, projects and research analysis that are to be developed through specific software and concepts that emerge through the use of mapping, parametric design and digital fabrication.
Goals and Objectives:
We aim to make clear the theoretical and technical knowledge in the approach to parametric and generative design and digital fabrication. (From collection and data management, to the manner in which these inform the geometries, to the fabrication of prototypes.)
Participants will also have the opportunity to practice the new knowledge gained in the design laboratory through project work.
Project Theme:
"Urban Field" Identify, study and analyze the system of public spaces in the urban area of the city of Salerno.
Connection, mutation, generation and evolution are the themes to be followed in project work.
Brief Description of Topics:
- Mapping. Our reality, in all its forms, has studied through concepts of the theory of Complex Systems. The techniques that will be used to study events and places of reality, will work for the management, manipulation and visualization of data and information. These will form the basis for project management and driven geometry, conducted during the second phase of the workshop.
- Parametric Design. Introduction to Rhino* and Grasshopper. Specifically, we will explain the concepts with which to work with the software of parametric design and how they function. Through these tools, we will arrive at the definition of systems of mathematical and / or geometrical relationships that are able to generate and govern patterns, shapes and objects that will inform the final design.
- Digital Fabrication. In this phase, participants of the workshop are organized into working groups. Participants have access to materials and conceptual apparatus that will take them directly to the fabrication of the geometries of the project, with the use of software CAD / CAM interface and the use of machines for the digital fabrication.
The DigitalMed workshop is organized by Nomad AREA (Academy of Research & Training in topics of Contemporary Architecture), in collaboration with the City of Salerno, the Order of Architects Province of Salerno and the National Institute of Architecture In / Arch - Campania.
Interested parties may download the Notice of Competition at the address www.digitalmedworkshop.com and fill the pre-registration no later than July 10th 2012.
PRESS OFFICE
Dr. Francesca Luciano
328 61 20 830
fra_luciano@libero.it
For information or subscriptions:
e-mail: info@digitalmedworkshop.com - tel: 089 463126 - 3391542980…
termedio a avanzado.
2013 | mayo 22, 23, 24 y 25. 20 Hrs.
Horario: 18:00 – 22.00 Jueves, Viernes y Sábado de 8:00 a 15:00 Hrs. Instructor_ Arch. David Hernández Melgarejo.
http://bioarchitecturestudio.wordpress.com
Objetivos:
El curso está dirigido a cada diseñador, ingeniero o arquitecto que quiere obtener una sólida base en modelado generativo y paramétrico dentro del flujo de trabajo en Rhinoceros.
En el curso se explorarán y construirán estructuras en el espacio paramétrico, incorporando entidades geométricas (Curvas, Superficies, Puntos, etc…) y usando patrones algorítmicos para la generación de estructuras con metabolismos contextualizados.
Cada paso será soportado con ejercicios que gradualmente incrementarán su complejidad.
El alumno aprenderá cómo trabajar con asociación geométrica y parámetros. Para perfeccionar asociación geométrica – asociación entre partes, asociación dinámica – las formas geométricas son generadas al seguir la conexión lógica entre la parte geométrica y sus restricciones, dimensión paramétrica y él proceso dinámico del diseño: Estimulamos el pensamiento relacional para la construcción de Diseño y Arquitectura de alto desempeño.
Resultados:
Los participantes con éste entrenamiento obtendrán las siguientes fundamentos.
· Generar aplicaciones orientadas al análisis, la optimización, documentación del diseño y fabricación.
Palabras clave:
Diseño Computacional, Scripting, Rhinoceros 5.0 + Grasshopper, Parametrización, Análisis, Galapagos, Genetic Solver, Optimización, Fabricación Digital.
Para mayor información:
MArch. Kathrin Schröter. E-mail: kschroter@itesm.mx
Dirección de Arquitectura. Oficinas de Aulas 1, segundo piso.…
the use of digital technologies as architectural design tools. The workshop " Computer Aided Design: parametric design and digital fabrication " aims to do some introductory teaching in the use of some of these tools.
The workshop will focus on the use of computational models of parametric behavior for generating architectural forms. The generative capacity of these models it will be tested in the development of designs defined by repetitive non-standard components, based on the parametric control of its variations and series differentiations. This process will be developed by the use of a three-dimensional modeling software - Rhinoceros, associated with an application for visual programming - Grasshopper.
The last day of the workshop is dedicated to the use of digital manufacturing tools in architecture. Part of the work will take place at the facilities of the Institute of Design of Guimarães (IDEGUI) providing for the use of their laboratories and manufacturing CNC machines (computer numerically controlled).
At the end of the workshop, it is intended the students to understand that the use of digital technologies in architecture can overcome representational functions, and their integration in the design conception, analysis and construction enriches the methodology of project development.
Terms & Participants
The workshop will take place at the School of Architecture of the University of Minho (Campus Azurém, Guimarães) and the Institute of Design of Guimarães (Couros, Guimarães).
The workshop is pointed at students who attend the 3rd year and 4th year from MiArq, EAUM.
The maximum acceptance is 20 students and a minimum of 10 students.
Deadline for entries is April 11 and must be performed by eaum.pac@gmail.com.
Program summary :
Day 23 April 14 -20h
Introduction to 3D modeling in Rhinoceros. Regular geometries, ruled surfaces and NURBS surfaces.
Day 30 April 14 -20h
Parametric design in architecture. Introduction to methods of visual programming.
May 1, 9 -13h 14 -18h
Development of a design idea by the use visual programming processes in Grasshopper.
May 2, 9 -13h 14 -18h
Introduction to methods of digital fabrication. Manufacture physical models of the proposals made.
It is expected that this meeting will take place in the IDEGUI labs.
team:
Bruno Figueiredo ( Lecturer, EAUM )
Paulo Sousa ( PhD candidate , EAUM )
Nuno Cruz ( Invited Lecturer , EAUM )
Cláudia Alvares ( 5th year MiArq student , EAUM )
Javier Bono ( 4th year MiArq student, EAUM )
João Amaro ( 5th year MiArq student, EAUM )…
ature. By investigating the process of decay across various scales, we will formulate rules of generating decomposition as our design research area. These rules will evolve into design strategies for the creation and fabrication of a large-scale prototype. The design and fabrication process will be informed by the use of robotic fabrication techniques.
The three-week long programme is formulated as a two-phase process. During the two-week initial phase, participants benefit from the unique atmosphere and facilities of AA’s London home. The second phase, lasting for a week, shifts to AA’s woodland site in Hooke Park and revolves around the fabrication and assembly of a full-scale architectural intervention.
Prominent Features of the programme:
• Teaching team: Participants engage in an active learning environment where the large tutor to student ratio (5:1) allows for personalized tutorials and debates.
• Facilities: AA Digital Prototyping Lab (DPL) offers laser cutting, CNC milling, and 3d printing facilities. The facilities at AA Hooke Park allow for the fabrication of one-to-one scale prototypes with a 3-axis CNC router, various woodworking power tools, and robotic fabrication.
• Computational skills: The toolset of Summer DLAB includes but is not limited to Rhinoceros, Processing, Grasshopper, and various analysis tools.
• Theoretical understanding: The dissemination of fundamental design techniques and relevant critical thinking methodologies through theoretical sessions and seminars forms one of the major goals of Summer DLAB.
• Professional awareness: Participants ranging from 2nd year students to PhD candidates and full-time professionals experience a highly-focused collaborative educational model which promotes research-based design and making.
• Fabrication: According to the specific agenda of each year, a one-to-one scale prototype is fabricated and assembled by design teams.
• Lecture series: Taking advantage of its unique location, London, Summer DLAB creates a vibrant atmosphere with its intense lecture programme.
Eligibility: The workshop is open to architecture and design students and professionals worldwide.
Accreditation: Participants receive the AA Visiting School Certificate with the completion of the Programme.
Applications: The AA Visiting School requires a fee of £1964 per participant, which includes a £60 Visiting Membership fee. A deposit of £381 is required when registering with the online form. The deadline for applications is 20 July 2015. No portfolio or CV is required. Online application link:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=325
Return train tickets between London-Hooke Park, accommodation & food in Hooke Park, and materials from Digital Prototyping Lab (DPL) are included in the fees.
Programme Directors:
Elif Erdine (AA Summer DLAB Director): elif.erdine@aaschool.ac.uk
Alexandros Kallegias (AA Summer DLAB Director): alexandros.Kallegias@aaschool.ac.uk
…
lysis, and large-scale prototyping techniques. The research generated at Summer DLAB has been published in international media and peer-reviewed conference papers.
AA Summer DLAB investigates on the correlations between form, material, and structure through the rigorous implementation of computational methods for design, analysis, and fabrication, coupled with analog modes of physical experimentation. Each cycle of the programme devises custom-made architectural processes through the creation of novel associations between conventional and contemporary design and fabrication techniques. The research culminates in the design and fabrication of a one-to-one scale prototype realized by robotic fabrication techniques.
Prominent Features of the programme:
Teaching team: Summer DLAB tutors are selected from recent graduates / current tutors at the AA and the small student ratio (5:1) allows for personalized tutorials and debates.
Facilities: AA Digital Prototyping Lab (DPL) offers laser cutting, CNC milling, and 3d printing facilities, and 2 KUKA robotic arms.
Computational skills: The toolset of Summer DLAB includes but is not limited to Rhinoceros, Grasshopper and various computational analysis tools.
Theoretical understanding: The dissemination of fundamental design techniques and relevant critical thinking methodologies through theoretical sessions and seminars forms one of the major goals of Summer DLAB.
Professional awareness: Participants ranging from 2nd year students to PhD candidates and full-time professionals experience a highly-focused collaborative educational model which promotes research-based design and making.
Robotic Fabrication: Scaled working models are produced via advanced digital machining tools each year, followed by the fabrication of 1:1 scale prototypes with the use of KUKA KR60 and KR30 robots.
Lecture series: Taking advantage of its unique location, London, Summer DLAB creates a vibrant atmosphere with its intense lecture programme.
Eligibility: The workshop is open to architecture and design students and professionals worldwide.
Accreditation: Participants gain 1 Year AA Visiting Membership and are awarded AA Certificate of Attendance at the successful completion of AA Summer DLAB.
Applications: The AA Visiting School requires a fee of £1950 per participant, which includes a £60 Visiting Membership fee. Discount options for groups are available. Please contact the AA Visiting School Coordinator for more details.
The deadline for applications is 16 July 2018. No portfolio or CV, only requirement is the online application form and fees. The online application can be reached from:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=537
For inquiries, please contact:
elif.erdine@aaschool.ac.uk (Programme Head)…
ll-Facade using Rhino and Grasshopper Participants will learn; Rhinoceros Grasshopper Advanced Parametric Design Brick Formations and Explorations Shadow-Design Relationship
Session 2: Advanced Digital Modeling for Additive Manufacturing (3D Printing) Participants will learn; How to prepare a 3D design to 3D Printing process in Rhinoceros Advanced Methods for 3D Print optimisation for time and cost effective production 3D Printing software education Cura
INFO
Date Saturday, 28 September 2019 Schedule 9:30am – 2:30pm (Session 1) | 2:45pm – 7:00pm (Session2) Venue (TBC) Pada Labs, Istanbul Language English/Turkish Softwares Rhinoceros Grasshopper 3D Cura Participants will need to bring their own laptops with software installed; other plugins will be distributed at the workshop. Prerequisites All tutorials are open to beginner level. No previous knowledge of Cura and Grasshopper needed. Basic knowledge of Rhinoceros recommended. Participation The workshop is limited to the first 20 applicants. Each student will receive a certificate of participation. Prices for each session: (You can pick one and attend one) Special Early registration (Deadline 1 August ) Students 310 TL Professionals 400 TL Regular registration Students 390 TL Professionals 480 TL Prices for Session 1&2 Combined: (Full Day) Special Early registration (Deadline 1 August ) Students 540 TL Professionals 690 TL Regular registration Students 620 TL Professionals 790 TL DISCOUNTS Group registration of 3 or more people will get a 15% discount. * Previous Pada workshop students will get a 10% discount. DIRECTOR Begum Aydinoglu, M.Arch AA DRL will be instructing and directing the following workshops. REGISTRATION: Email to pada.workshops@gmail.com for registration instructions. Please note that we have limited seats and there won't be any exceptions. …
ur setup. Can you say what sensor you are using? Are you using an Arduino to write this ascii information to the serial port? If so, there may be some formatting code for the string that you'll need to do to get the Read component to function properly. I see that you were able to open the port and Start reading... so my first thought is that the data is formatted correctly....
All of the read components look for a specific character (in this case two characters) to indicate when it has reached the end of the line being read and should spit out the data. In this case, Firefly uses the Carriage Return (\r) and Line Feed (\n) to know when it has reached the end of the line. In arduino, these are automatically added to any line if you use the Serial.println("blah, blah, blah"); command. Notice, this is different from the Serial.print("nothing to see here"); command. This doesn't mean that you can't still use the regular print command... it's just you need to use the println command to indicate when you've reached the end of the line. Let's take a look at a simple example.
void setup() { Serial.begin(9600);}void loop() { int sensorValue = analogRead(A0); Serial.print("The value of the sensor is: "); Serial.println(sensorValue);
delay(20); // important to wait some small time so you aren't sending just a ton of info over to GH which will cause it to crash :(
}
The first print statement prints a string to the serial port... and the next one adds the current sensor value... and THEN adds the carriage return and line feed to start a new line. The nice thing about using these together is that you can concatenate any type of data you want. If you were to upload this sketch, you should see a sentence being printed to the serial port that says "The value of the sensor is: 512". I made up the number, but you get the idea. Notice, I also had to include a delay function. You don't always need this (there are other ways to go about this) but the important thing to note is that the loop cycle on the Arduino can run really fast. I mean... really fast. So, you wont want to send so much data over to GH, because this could flood the string buffer in the Read component and cause it to crash (eventually). It's a good idea to add some small time interval just to slow it down a bit. I should say that I've optimized the refresh rate in the next release so it's significantly faster... so hopefully this wont be as big of a problem... but hopefully that helps some.
Now... Why are you writing data to a sensor? Sensors by default are considered inputs... so I'm quite confused as to why you would want to send data back (if you are... then you need some way to handle the string data being sent from GH... this is the whole reason we built the Firefly firmata... it sets up the two-way protocol so you don't have to deal with all of that mess... If you're going to read and write, you're better off just uploading the firmata and using the Uno Read and Write components). Also, I'm not very familiar with the Hyperterm or Advanced Serial Port Terminal... but I will say that could get COM conflicts if you're trying to open the port with different tools. Anyway, I hope some of this helps you get up and running.
Cheers,
Andy
…
ne. Though I suppose providing a help file which lists some useful tricks for some operations would be a good place to start.
It would be possible to add persistent undo to Clusters, and it wouldn't even be that difficult. Adding undo data into the GH file is something I've been meaning to add since the first day of undo/redo, and the plumbing is in fact there, but it was never fully hooked up. I will definitely try this for GH2. And I'll also have a think about how to implement version history for clusters.
Phew, my brain hurts even just to think about this. I suppose step one would be to write a clever merge algorithm for two files that have some things in common and some not. But even that will be tricky as heck.
This is a major problem. First of all, running the solver in a thread and keeping the UI alive will only slow things down even more. On a file which takes 15 minutes to solve that's no big deal, but you certainly don't want to be adding a 20 millisecond delay to a solution which only takes 30 milliseconds.Multi-threading will be something I'm going to try and implement in GH2, but there's only so much I can do. If you run a solid boolean operation on a boatload of shapes, it's a single operation that is performed inside Rhino and there's nothing I can do to make it run on multiple threads. This is in general an issue, sometimes it takes a long time because there are many operations to perform; like offsetting 2500 curves. I can probably multi-thread that provided the Rhino curve offsetter is thread-safe. However stuff may also take a long time because there is a single operation (like the aforementioned huge solid boolean).Lastly, I have no way to predict how long a component is going to take. I can probably work out how far along in steps a component is, but not how far along in time.
What would you do with a solver which runs in the background? How does it differ from only running solutions when you want to? Let's say the solver is threaded and the canvas remains responsive. As soon as you make a change to the GH file, the solver needs to be terminated as it is now computing stale data. Wouldn't it be just as effective to disable the solver, make all the changes you want to make, then press F5?
Just because something runs in a thread doesn't mean you can shoot it in the head any time you want without consequences. Aborting threads typically means setting a boolean somewhere and then letting the thread commit suicide, while performing all the necessary cleanup. If you just destroy a thread there's no saying in what state you leave the memory.
I think a good place to start with these sort of problems is to keep on improving clusters, add more flexible structuring UI such as Layers or Filters or Pages or whatever to the canvas, add ways to share data between remote parts of a file without suffocating the display with wires, and to provide easy ways to temporarily disable parts of a file (think of it as Clipping planes for GH). That way you can make local changes and see local effects before solving the entire file again.
I'm certainly impressed by the sheer extent of the file you people made, it will be a lovely test case for UI improvements.
--
David Rutten
david@mcneel.com
Tirol, Austria…
Added by David Rutten at 3:34am on September 4, 2013