te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …
thing that MicroStation does (or doesn't). The eternal debate between us is that they focus to the so called BIM aspect of things (and obviously on interoperability matters - that said IFC2*4 is" implemented" in certain Bentley verticals like BA and others) whilst I'm after assembly/component puzzles (and on that matter ... MS ...hmm... to put it politely is not exactly CATIA and/or NX, he he).
On the other hand this paranoid obsession with Level/Layer driven CAD (I hate it) defines a red thick line between CAD and MCAD - because the most intelligent importer can't emulate the way that Siemens NX/CATIA classifies objects - and without control power means nothing.
On the other hand Microstation V9 (...soon) has interesting scripting capabilities (think Modo rather Generative Components) ... meaning that Grasshopper could work there in a rather nice way. I think that I must talk for that to Ray (he recently ditched the ancient legacy MS render engine in favor for the Luxology/Nexus engine). Ray still is negative to buy Act3D mind (hope that you know the mother of visual scripting - the Quest3D VR thing).
On the other hand - within the broad AEC aspect - things these days are different (especially in fast developing countries the likes of UAE, Saudi Arabia, certain ex USSR "democracies" etc etc). Studies are outsourced even at Preliminary Design stage to various sub-contractors (they undertake the Study completion per discipline as well). This means that N separate groups doing M aspects of the whole ... meaning entropy^(N*M) - that's chaos in plain English.
With this in mind I'm quite (a lot) skeptical about the practical meaning of the whole exchange thing in AEC - at least with regard the countries mentioned (not to mention that several portions of a modern AEC thing are made via MCAD apps - chaos^chaos.
I'll back with more focused issues on that matter.
But the big question is: Grasshopper of Generative Components? Well...let's talk serious SS bikes instead: think a Ducati 1198 and a BMW S1000RR (I have them both): which is "best"? The thing is that not always the best bunny is the fasted bunny and not always the fasted bunny is the best bunny.
Cheers,
Peter
…
ty to work in a new and exciting space, where design, art, technology and fashion meet.
If you guys are looking for a full- or part-time job, or know an expert who is - we're happy to with meet him/her. We're located in the Lower East Side, New York.
What the person will be doing:
- Provide technical vision for product and infrastructure features
- Work with Marketing/Product Management to enhance the user experience
- Develop (with our team) our e-commerce customization platform
- Manage our real time 3D modeling platform
- Mentor 3D modelers and developers, define and document development methods, and share best practices
- Review and recommend improvements to product architecture
What we require:
- BA/BS/ BARCH degree OR CS/EE/Engineering degree preferred
- EXTENSIVE 3d modeling, rhino and grasshopper experience
- Experience building online computer games
- Experience creating natural and fractal patterns and forms in 3d
- UV Texture Mapping bit mapping (texture mapping)
- Experience managing a development team in projects with tight SCHEDULES
- Architecture, programing, scripting, Media or Fashion industry experience preferred
- Experience implementing web interfaces using XHTML, CSS, Javascript, and AJAX
- Experience in recommendation engines and algorithms
- Interest in working in an early stage fast-paced environment…
next level.
This Parametric Design course will provide the participants with the necessary knowledge and ability to use Grasshopper, a free visual programming plugin in Rhinoceros; you will be guided through a series of hands-on exercises that highlight NURBS modeling and its concepts. We will introduce Grasshopper as a graphical algorithm editor tightly integrated with Rhino’s 3D modeling tools. You will also learn how Rhino is used to render models for visualization, translate 3D models for prototyping, and export 3D models into 2D CAD or graphics programs.
English is the course main language.
Location: Düsseldorf city center
Registration and buying Tickets
www.digitalparametrics.eventbrite.de
Course Calendar:
4 Days 6 hours each
Total duration 24h
2 weekends
Date:
Sat. 17 - Sun. 18 June
Sat. 24 - Sun. 25 June
10:00 - 17:00
Getting Started in Rhino. 2 days (17 - 18 June)
Getting Started in Grasshopper. 2 days (24 - 25 June)
-----------------------------------------------------------------------
Participants will be given a certificate of participation at the end of the course.
-----------------------------------------------------------------------
Course fees:
Professionals: 600€ (excl. MwSt.) Students: 500€ (excl. MwSt.) Students need to provide: Copy of current student ID or proof of student enrollment at University/School.
Group discounts:
Group of 3 professionals: 3x500 = 1500€ (excl. MwSt.)
Group of 3 Students: 3x400 = 1200€ (excl. MwSt.)
Participants are kindly asked to bring their own laptops and have pre-installed Rhino + Grasshopper.
Useful Resources:
Rhinoceros Installation (90 days full version trial available): http://www.rhino3d.com/download
Rhinoceros for Mac (includes Grasshopper) http://www.rhino3d.com/download/rhino-for-mac/5/wip
Grasshopper Free Installation: http://www.grasshopper3d.com/page/download-1
Grasshopper Free Plugins: http://www.food4rhino.com/app/lunchbox http://www.giuliopiacentino.com/weaverbird
Main Tutor:
Rihan
M.A. Dipl.Ing. Architect
Architect at RKW Architektur + Düsseldorf
For any questions about the course, please email: info@immersive-studio.com…
ll geometry.
The difference with programs like Inventor is that they are made for production, regardless of the fabrication method. I won't go into detail about that, and instead focus on the modeling process.
In this little model, the starting point actually is a bit obvious, the foundation.
The only contents in the 3dm file are 27 lines. These indicate the location of each footing, and the direction of the tilt of each column. Everything else is defined in GH with the use of numbers as input parameters.
Needless to say, instead of those lines you could obviously generate lines and control the number of columns and panels, hence establish their layout, with any algorithmic or non-algorithmic criteria you please. That marks a major difference between GH and Inventor.
You can generate geometry with Inventor via scripting/customization (beyond iLogic), with transient graphics for visual feedback similar to GH's red-default previews. However Inventor's modeling functions are not set to input and output data trees. I won't go into detail on that, but suffice to say that the data tree associativity of GH was for me the first major difference I noticed. I've used other apps with node diagram interfaces like digital fusion for non-linear video editing since the late 90's, so the canvas did not call my attention when I first started using GH.
Anyways, here's a screen capture of the foundational lines:
In the first group of components, the centerlines of the rear columns are modeled:
And the locations in elevation for connection points are set. Those elevations were just numbers I copied from Excel, but you can obviously control that any way you please. I was just trying to model this quickly.
The same was done for the rear columns:
The above, believe it or not, took me the first 5 hours to get.
Here's a screen capture of what the model and definition looked like after 4 hours, not much:
If you're interested, next post I can get into the sketching part you mentioned, which is a bit cumbersome with GH, but not really.
I wouldn't say that using GH to do this little model was cumbersome, it just needed some thinking at the beginning. You do similar initial thinking when working with a feature-based modeler.…
Added by Santiago Diaz at 12:44am on February 24, 2011
edit 29/04/14 - Here is a new collection of more than 80 example files, organized by category:
KangarooExamples.zip
This zip is the most up to date collection of examples at the moment, and collects t
ers and researchers, programmers and artists, professionals and academics who come together for 4 days of intense collaboration, development, and design.
The sg2012 Workshop will be organised around Clusters. Clusters are hubs of expertise. They comprise of people, knowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The Workshop is made up of ten Clusters that respond in diverse ways to the sg2012 Challenge Material Intensities.
Applicants to the sg2012 Workshop will select their preferred cluster from the following:
Beyond Mechanics
Micro Synergetics
Composite Territories
Ceramics 2.0
Material Conflicts
Transgranular Perspiration
Reactive Acoustic Environments
Form Follows Flow
Bioresponsive Building Envelopes
Gridshell Digital Tectonics
More information about the Workshop and Clusters can be found here:
http://smartgeometry.org/index.php?option=com_content&view=article&id=116&Itemid=131
The application process will close on January 15th, 2012.
Full Fee $1500
Reduced Fee $750
Scholarship Fee $350
Fees include attendance to both the workshop and conference from March 19th-24th.
Reduced Fee and Scholarships are available only for Academics, Students and Young Practitioners, and are awarded during a competitive peer review process.
sg2012 takes place from 19-24 March 2012 at EMPAC (http://empac.rpi.edu/) and is hosted by Rensselaer Polytechnic Institute in Troy, upstate New York USA. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts: a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.
sg2012 Challenge Material Intensities
Simulation, Energy, Environment
Imagine the design space of architecture was no longer at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information. Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities. sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org
Follow us on Twitter at http://twitter.com/smartgeometry…
Added by Shane Burger at 12:29pm on December 13, 2011
akes the linear regression of the Schroeder integral over 30 dB worth of decay. Whether it is T-15 or T-30, they all seek to estimate the RT, which is always always the time it takes for sound to decay 60 decibels.
The website has benchmarks, for your reference. You can find them under the 'Pachyderm' drop down menu, under 'Benchmarks'.
Your model may well require millions of rays to be accurate. It sounds like a very large space. I'm sorry if that is an unpleasant answer. Sometimes it does help to have a computer with more cores to help with this. I have gotten up to 90% processor usage on a 12 core machine before.
Arthur…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…