e to constrains, I HAVE to do it like this (I can't 3D print everything or opposite).
First
I have no idea how to make the panels, without so many duplicate Edges, Faces etc.
Second
I can't figure out how to align the triangle panels to fit in the construction, so it can be assembled ideally without glue. This problem is both conceptual (I can't figure out how to do it fiscally) and grasshoper-wise - I don't know how to organize data list and produce a global movement, so that the triangle parts do not intersect with each other, BUT intersect the 3d printed construction part (where they fit fix in or just fit and can be glued).
Triangles will be milled out from 3mm Plexiglas, BUT I will not have an option to mill at an angle, so only 90° edges.
3D printed parts will be executed by a high level production powder printer, so it should hold good.
Any ideas?
best,
cuki
…
File) 2. I have designed a curved Trichordal-Truss from one curve in Rhino.
The Truss is lying in the XY direction and the footer is placed on the zero point.
3. And now my problem:
I want to put the Truss-object on the feet, move 90°
(from the XY axis to Z axis, see sketch 1).
4. Then copy / move the truss to all 36-points of ellipse (see sketch 1).
5. Align the 36 trusses with the center of the triangle .
pointing at the center of the ellipse (see sketch 2).
6. Using a slider to change the position of the 36-Trusses at der ellipse.
Variable distance between Truss and ellipse (see sketch 3).
Thanks for you Answer.
Best regards
Noureddine…
multiply of variants from Galapagos, to have a chance for better analysis and comparability after. I also would like to use more then one solution in my design after.
In old topics i found kind of 3 solutions.
1.Change Galapagos to octopus ( what don t really want to do, i am kind of happy with Galapagos)
2. Use Slingshot! and MySQL Database ( it s look a little bit too complicated from the first view)
3. Use Colibri and Design Explorer Platform (looks kind of pretty way to solve my problem)
So i tried to add Colibri components to my definition , but have some mistake in the Colibri Aggregator after adding the Genome "An item with the same key already been added". I think it comes because for some steps i am using the "Gen Pool" and not a normal slider. Is it a way to connect Gen Pool and Colibri (i really prefer to have it, then a lot of sliders in some cases)?
And the second question (if i will get it solved with gen pool), could i somehow controll the recording process? For example i would likte to record only variants wit fitness over 90% or start recording just after 20. generation and record till the end?
I also opend for all other possibilities to reach the same goal (record/save/bake multiply variants from galapagos)
…
ace Syntax." eCAADe 2013 18 (2013): 357.
http://www.sss9.or.kr/paperpdf/mmd/sss9_2013_ref048_p.pdf
The measure Entropy is newer. I hereby explain it (from my PhD dissertation):
Entropy values, as described in (Hillier & Hanson, The Social Logic of Space, 1984) and specified in (Turner A. , “Depthmap: A Program to Perform Visibility Graph Analysis, 2007), intuitively describe the difficulty of getting to other spaces from a certain space. In other words, the higher the entropy value, the more difficult it is to reach other spaces from that space and vice-versa. We compute the spatial entropy of the node as using the point depth set:
(11)
“The term is the maximum depth from vertex and is the frequency of point depth *d* from the vertex” (ibid). Technically, we compute it using the function below, which itself uses some outputs and by-products from previous calculations:
Algorithm 4: Entropy Computation
Given the graph (adjacency lists), Depths as List of List of integer, DepthMap as Dictionary of integer
Initialize Entropies as List(double)
For node as integer in range [0, |V|)
integer How_Many_of_D=0
double S_node=0
For depth as integer in range [1, Depths[node].Max()]
How_Many_of_D=DepthMap.Branch[(node,depth)].Count
double frequency= How_Many_of_D/|V|
S_node = S_node - frequency * Math.Log(frequency, 2)
Next
Entropies [node] = S_node
Next
…
starting as soon as possible.
We're offering challenging projects, insights and contact to leading industry companies, project responsibilities according to abilities and initiative, great work environment and laid-back atmosphere, room to play and evolve,...
Our ideal candidate:
- is passionate about construction, engineering and (computational) design
- is proficient in Rhino / Grasshopper / (GH-)Python
- knows his ways around the Adobe Suite and MS Office
- has a current work permit for Germany
- is a German speaker (other native speakers also welcome, with excellent English skills)
- has an architectural background (Student / BA / MA /...), ideally with work experience
- is interested / has experience in digital manufacturing and prototyping
- will be able to join us shortly
We're looking forward to your applications / inquiries / CVs to: mpelzer@fat-lab.de
View our past projects here: www.fat-lab.com
(Current projects, unfortunately, are non-disclosed)
…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
r "virtual partitions" as follows:
What I mean "air walls" here, is derived from the description of the E+ documentation with the header of "Air wall, Open air connection between zones". (Page 17, http://apps1.eere.energy.gov/buildings/energyplus/pdfs/tips_and_tricks_using_energyplus.pdf)
As I understand, the term "air wall" used in E+ here refers to a description of something like "boundary condition" between adjacent interzone heat transfer surfaces, but not a kind of "construction or material" (like air space resistance or air gaps within a wall/double glazing window).
The main purpose of introducing the "air wall", is to simulate or approximate the airflow/convection/natural ventilation effect between multiple thermal zones which are connected by a large opening.
In my previous tests, using HBzones and GB, I managed to create the gbXML file which can be successfully imported to DB (without assigning any constructions within HB). And the adjacency condition can be recognized automatically by DB, even when I did not use the "Solve adjacencies" component in HB - shared surfaces between multiple thermal zones are recognized automatically by BD as "internal - partition"(which are standard partitions, but not virtual partitions).
In order to create/approximate "virtual partition", I need to manually draw a "hole" in the standard partition surface (fig.1&2). Again, the reason why we want to use "virtual partitions"(or "air wall") is that it allows airflow between multiple thermal zones which are connected by large openings and we could get different temperature of the each subdivided thermal zone which compose a large thermal zone.
My question is, if there is a possible way to simulate/approximate this kind of "virtual partitions"(or "air wall") in HBzones or in GB? If so, I would like to test if DB recognizes it or not. Actually, we expect that there is no need to involve any manual operations (like drawing a "hole" in the standard partition surface) in DB, due to an automatic optimization loop.
Thank you!
Best,
Ding
fig.1
fig.2
…
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…
2d grid from
grasshopper but in 3d, fully controllable of course. I want to do something
like the image in this web
site:http://news.cnet.com/Photos-Weaving-high-tech-fabrics-of-the-future—page-12/2009-1008_3-5667576-12.html
I figured that connecting points and lines kind of works (point and line input AB command) but the line length changes when I move a
point. What I want to be able to do is to move a point and drag others but keep
the line segments constant, just as a real net.
…
Added by Jesus Garza at 8:28am on February 23, 2010
ehow acquire different settings/are calculated differently. Appears at random “rows” of points, sometimes it all works fine, so I need to do a series for the error to show. See images below.
In the Ladybug fly run the VT of the window changes.
It’s taken me a day and a half to track this error down. Phew.
I get the same error on two different comps.
What is causing this? Does anyone get the same error? Images below created with RADquality set to 2, and 7 cores. Fiddling with Radsettings dont help, I think, except error goes away with very low ab.
…