he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…
whole design intent, but this is what Inventor is good at. The way it packages bits of 'scripted' components into 'little models' that can be stored and re-assembled is central to MCAD working.
The Inventor model shown is almost 5 years old. We don't model like that any more, however it does offer a good idea of general MCAD modeling approaches.
iParts is useful in certain situations, it could've been useful in the above model, its usefulness is often in function of the quantity of variants/configurations.
So much is scripted in GH, maybe it should also be possible to script/define/constrain/assist the placement/gluing of the results?
...
Starting point: I think we are talking across purposes. AFAIK, the solving sequence of GH's scripted components is fixed. It won't do circular dependencies... without a fight. The inter-component dependencies not 'managed' like constraints solvers do for MCAD apps.
Components and assemblies are individual files in MCAD.
Placement of these within assemblies in MCAD is a product of matrix transforms and persistent constraints. There is no bi-directional link, the link is unidirectional (downflow only), because of the use of proxies.
Consequently, scripting the placement of components is irrelevant in GH, unless you decide that each component needs to be contained in its own separate file.
This also brings up the point that generating components and assemblies in MCAD is not as straightforward. In iParts and iAssemblies, each configuration needs to be generated as a "child" (the individual file needs to be created for each child) before those children can be used elsewhere.
You notice the dilemma, if you generate 100 parts, and then you realize you only need 20, you've created 80 extra parts which you have no need for, thus generating wasteful data that may cause file management issues later on.
GH remains in a transient world, and when you decide to bake geometry (if you need to at all), you can do that in one Rhino file, and save it as the state of the design at that given moment. Very convenient for design, though unacceptable for most non-digital manufacturing methods, which greatly limits Rhino's use for manufacturing unless you combine it with an MCAD app.
One of the reasons why the distributed file approach makes perfect sense in MCAD, is that in industry you deal with a finite set of objects. Generative tools are usually not a requirement. Most mechanical engineers, product engineers and machinists would never have any use for that.
The other thing that MCAD apps like Inventor have, is the 'structured' interface that offers up all that setting out information like the coordinate systems, work planes, parameters etc in a concise fashion in the 'history tree'. This will translate into user speed. GH's canvas is a bit more freeform. I suppose the info is all there and linked, so a bit of re-jigging is easy. Also, see how T-Flex can even embed sliders and other parameter input boxes into the model itself. Pretty handy/fast to understand, which also means more speed.
True. As long as you keep the browser pane/specification tree organized and easy to query.
:)
Would love to understand what you did by sketching.
I'll start by showing what was done years ago in the Inventor model, and then share with you what I did in GH, but in another post.
Let's use one of the beams as an example:
We can isolate this component for clarity.
Notice that I've highlighted the sectional sketch with dimensions, and the point of reference, which is in relation to the CL of the column which the beam bears on. The orientation and location of the beam is already set by underlying geometry.
Here's a perspective view of the same:
The extent of the beam was also driven by reference geometry, 2 planes offset from the beam's XY plane, driven by parameters from another underlying file which serves as a parameter container:
Reference axes and points are present for all other components, here are some of them:
It starts getting cluttered if you see the reference planes as well:
Is I mentioned earlier, over time we've found better ways to define and associate geometry, parameters, manage design change, improving the efficiency of parametric models. But this model is a fair representation of a basic modeling approach, and since an Inventor-GH comparison is like comparing apples and oranges anyways, this model can be used to understand the differences and similarities, for those interested.
I haven't even gotten to your latest post yet, I will eventually.…
Added by Santiago Diaz at 10:36am on February 26, 2011
he picture (4).
Previously, I had a problem with generating intersections between the two directions of the beams, but a colleague helped me by extending beams, so there was no problem with lines of intersection. But this solution has generated curl (5) at the highest vertex geometry, which I ignored in order to repair it before printing, perhaps this mean my problem with my beam spread properly. Only when the beams is 19, does not jump no problem, but I still can not distribute them properly.
(1)
(2)
(3)
(4)
(5)
I tried to show as simply as possible by removing or signing my code in GHX file.
Thank you in advance for your help
…
GH, same as using sweep2 command in Rhino.
The one on the right is what I got so far (the output smooth our the kink of the original rails). Basically I am just following the methods provided by sdk sample: http://wiki.mcneel.com/developer/sdksamples/sweep2 .
The following is the function I copy and use directly from the SDK sample. By using this function, I can generate the sweep surface at right. But I want to have is the one in the middle with the kink edges. Can anyone show me how and where to modify he settings? I guess some sweep arguments need to be changed? I have try couples, such m_simplify, m_bSimpleSweep, m_bSameHeight, m_rebuild_count... but still cannot find a right combination for this function to output the sweep surface I want. Any suggestions or helps are very appreciated. Thanks for your help and time on this.
'Sweep2 function'----------------
Sub Sweep2( ByVal Rail1 As IOnCurve, _
ByVal Rail2 As IOnCurve, _
ByVal sCurves As List(Of IOnCurve), _
ByRef Sweep2_Breps As List(Of OnBrep))
'Define a new class that contains sweep2 arguments
Dim args As New MArgsRhinoSweep2
'Set the 2 rails
Dim Edge1 As New MRhinoPolyEdge
Dim Edge2 As New MRhinoPolyEdge
Edge1.Append(Rail1.DuplicateCurve())
Edge2.Append(Rail2.DuplicateCurve())
'Add rails to sweep arguments
args.m_rail_curves(0) = Edge1
args.m_rail_curves(1) = Edge2
args.m_bClosed = False
Dim section_curves As New List(Of OnCurve)
'Loop through sections to set parameters
For Each Section As IOnCurve In sCurves
Dim sCurve As OnCurve = Section.DuplicateCurve()
section_curves.Add(sCurve)
Dim t0 As Double = 0
If Not Edge1.GetClosestPoint(sCurve.PointAtStart(), t0) Then
If Not Edge1.GetClosestPoint(sCurve.PointAtEnd(), t0) Then
Dim s As Double = 0
sCurve.GetNormalizedArcLengthPoint(0.5, s)
Edge1.GetClosestPoint(sCurve.PointAt(s), t0)
End If
End If
args.m_rail_params(0).Append(t0)
Dim t1 As Double = 0
If Not Edge2.GetClosestPoint(sCurve.PointAtStart(), t1) Then
If Not Edge2.GetClosestPoint(sCurve.PointAtEnd(), t1) Then
Dim s As Double = 0
sCurve.GetNormalizedArcLengthPoint(0.5, s)
Edge2.GetClosestPoint(sCurve.PointAt(s), t1)
End If
End If
args.m_rail_params(1).Append(t1)
Next
'Set shapes
args.m_shape_curves = section_curves.ToArray
'Set the rest of parameters
args.m_simplify = 0
args.m_bSimpleSweep = False
args.m_bSameHeight = False
args.m_rebuild_count = -1 'Sample point count for rebuilding shapes
args.m_refit_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AbsoluteTolerance()
args.m_sweep_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AbsoluteTolerance()
args.m_angle_tolerance = RMA.Rhino.RhUtil.RhinoApp.ActiveDoc.AngleToleranceRadians()
Dim sBreps() As OnBrep = Nothing
If (RhUtil.RhinoSweep2(args, sBreps)) Then
For Each b As OnBrep In sBreps
Sweep2_Breps.Add(b)
Next
End If
Return
End Sub
…
r graphics get saved as 24x24 pixel images before they are put into the grasshopper application, which means the icons look like crap when you zoom in. This is the aforementioned problem that needs to be addressed in GH2. There have historically been two approaches to this issue:
Provide pixel images with several sizes.
Render vector graphics directly.
Option 1 is common for apps that do not have variable levels of zoom, such as Windows Explorer. When explorer shows file icons it either shows them in 16x16, 32x32, 48x48, 96x96, or these days, various HUGE sizes. As a result *.ico files allow you put in different images for all these target sizes. Since Grasshopper has variable zoom levels, this is not an ideal solution. Also, it requires a lot more work per icon.
Option 2 is becoming more and more popular as increased graphics speed now allows for the real-time rendering of vector graphics. Yet, you still need a renderer that knows how to draw vector geometry crisply at low sizes. All vector renderers I know just interpolate the geometry linearly and if a line happens to end up 'between pixels' it's just fuzzy.
I don't have hard and fast rules for the icons, but I try to adhere to at least these:
Keep a border of 2 pixels free around the icon content. So basically only use the inner 20x20 pixels rather than the 24x24 you're allowed. This is needed because the drop shadow needs to go there.
Only draw silhouette edges around shapes, not inner creases. Typically a 1-pixel line will do. I prefer to use a dark version of the fill colour rather than black for edges.
Loose curves can be drawn in 1 or 2 pixel thicknesses, depending on how important the curve is.
Try to avoid text in your icons (not always possible).
Stick to 1 colour family per icon, preferably per icon family. You can add highlights with another colour if you must, but too many hues make an icon hard to read (for the example the [Voronoi] icon, it has red, green and blue and it's a bit of a mess, on the other hand [Colour Wheel] has the full spectrum and seems to work quite well...).
Very roughly speaking, if there's both black and red geometry in an icon, it means the red is component input and the black is component output.
Drop shadows are pixel effects, applied to the 24x24 image. They have a blurring radius of 2 pixels, a horizontal offset of 1 pixel to the right, a vertical offset of 1 pixel to the bottom and they are 65% black.
When you use high contrast shapes (for example black edges on a light background) the anti-aliasing provided by vector renderers such as Xara or Illustrator won't be enough to make it look smooth. I'd recommend avoiding high contrast if at all possible, but if not possible then draw a 1-pixel line around the dark bits in 95% transparent black. This effectively extends the anti-aliasing range from 1.5 to 2.5 pixels and it helps make things looks smoother.
--
David Rutten
david@mcneel.com…
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
, Engineer and Researcher from France with broad programming experience. He is the author of the City in 3D Rhinoceros plugin for creation of buildings according to geojson file and with real elevation. Guillaume already created a new component: "Address to Location". It enables getting latitude and longitude values for the given address:
2) Support of Bathymetry data: automatic creation of underwater (sea/river/lake floor) terrain. This feature is now available through new source_ input of the "Terrain generator" component. Here is an example of terrain of the Loihi underwater volcano, of the coast of Hawaii:
3) A new terrain source has been added: ALOS World 3D 30m. ALOS is a Japanese global terrain data. Gismo "Terrain Generator" component has been using SRTM 30m terrain data, which hasn't been global and was limited to -56 to +60 latitude range. With this addition, it is possible to switch between SRTM and ALOS World 3D 30m models with the use of source_ input.
4) 9 new components have been added:
"Address To Location" - finds latitude and longitude coordinates for the given address.
"XY To Location" - finds latitude and longitude coordinates for the given Rhino XY coordinates. "Location To XY" - vice versa from the previous component: finds Rhino XY coordinates for the given latitude longitude coordinates. "Z To Elevation" - finds elevation for particular Rhino point. "Rhino text to number" - convert numeric text from Rhino to grasshopper number. "Rhino unit to meters" - convert Rhino units to meters. "Deconstruct location" - deconstructs .epw location. "New Component Example" - this component explains how to make a new Gismo component, in case you are interested to make one. We welcome new developers, even if you contribute a single component to Gismo! "Support Gismo" - gives some suggestions on how to make Gismo better, how to improve it and support it.
5) Ladybug "Terrain Generator" component now supports all units, not only Meters. So any Gismo example file which uses this component, can now use Rhino units other than Meters as well. Thank you Antonello Di Nunzio for making this happen!!
Basically just forget about this yellow panel:
This panel is not valid anymore, so just use any unit you want.
6) A number of bugs have been fixed, reported in topics for the last couple of weeks. We would like to thank members in the community who invested their time in testing, finding these bugs and reporting them: Rafat Ahmed, Peter Zatko, Mathieu Venot, Abraham Yezioro, Rafael Alonso. Thank you guys!!! Apologies if we forgot to mention someone.
The version 0.0.2 can be downloaded from here:
https://github.com/stgeorges/gismo/zipball/master
And example files from here:
https://github.com/stgeorges/gismo/tree/master/examples
Any new suggestions, testing and bug reports are welcome!!…
Added by djordje to Gismo at 5:13pm on March 1, 2017
; GH, this one came out and rhinoceros is disappear...like this
it said " Rhinoceros5's working is stopped. because some problems occured so Rhinoceros5 can't work correctly no longer " then I have no choice but terminate Rhinoceros.
There are some discussion about RhinoIronPython installing numpy though, no one has same problem like me. so Please somebody tell me!!
and one more question...just in case, I tried to install numpy into ironPython2.7
C:\Program Files (x86)\IronPython 2.7>ipy "C:\Program Files (x86)\IronPython 2.7\ironpkg-1.0.0..py" --installBootstrapping: c:\users\owner\appdata\local\temp\tmp2nand1\ironpkg-1.0.0-1.egg 118 KB [.................................................................]
C:\Program Files (x86)\IronPython 2.7>ironpkg -hUsage: ironpkg-script.py [options] [name] [version]
.
.
.
C:\Program Files (x86)\IronPython 2.7>ironpkg scipyWrote configuration file: C:\Users\owner\.ironpkg=============================================================================Traceback (most recent call last): File "C:\Program Files (x86)\IronPython 2.7\ironpkg-script.py", line 10, in <module> File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\main.py", line 364, in main File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 27, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 67, in add_repo File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 92, in write_data_from_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 435, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 654, in http_error_302 File "C:\Program Files (x86)\IronPython 2.7\Lib\httplib.py", line 1261, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 73, in open_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 154, in urlopen File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 547, in http_response File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 467, in error File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 429, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 446, in _open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1240, in https_open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1167, in do_openAttributeError: 'module' object has no attribute '_create_default_https_context'
C:\Program Files (x86)\IronPython 2.7>
how can I deal with this error?…
well, very similar input data must result in wildly different hashes. For example, imagine we have an algorithm which computes hashes of text, and the hashes it computes are all numbers between 0 and 999. We then apply this algorithm to a piece of text:
"When Spring comes back with rustling shade" = 385
So far so good. Now imagine we change the text slightly, for example by removing a single "l":
"When Spring comes back with rusting shade" = 973
Minor change -> very different hash. There are of course way more unique texts than there are numbers between 0 and 999. This must therefore mean that a lot of text will result in the same hash. For example "When Spring brings back blue days and fair." may also result in a hash of 385. Because of the pigeonhole principle, there is nothing to be done about this.
Now for the tricky bit. Hashes are often used to validate executable code. Say your friend James at MI6 sends you a small program that will allow you to eavesdrop on Angela Merkel, and -over the phone- he tells you the hashcode for that application. You can then hash the application yourself, verify that it indeed results in the same hashcode and then you know you can trust the executable.
But now Jack from the FBI intercepts the email and adds a few sneaky lines of code to the original application allowing him to determine from your internet search history with up to 95% accuracy whether you like extra cheese on your pizza. The application has now been tampered with, it can no longer be trusted and you should be able to figure this out as it will no longer result in the same hash code.
But wait! Some hashing algorithms are more secure than others. MD5 is now officially considered to be 'hacked' and it is no longer recommended for doing naughty spying. Specifically, Jack will be able to inject his own code in such a way that it does not result in a different hash. Instead, the SHA family of hashers are to be used, as it is not yet known how to trick these hashers.
This is where the problem comes in, because apparently the US government has forcefully disabled the use of MD5 for all purposes. This is a shame because I use it to quickly compare bitmap icons for identicalness so I only have to store an icon in memory once. There is no security hole due to this, because I'm not hashing secure data. MD5 is somewhat faster than SHA, and since I have to hash several hundred icons on Grasshopper start, I opted for the faster one.
(Very) long story short; you're hosed. Grasshopper uses MD5; USgov does not like; Grasshopper does not run on USgov computers.
I'll do some testing to see if I can switch to SHA and then we can see whether or not that solves the problem. This however will take a while as I'm going on a business trip next week and have yet to prepare my presentations.
--
David Rutten
david@mcneel.com…
Added by David Rutten at 12:06pm on March 31, 2014