being driven by the wii nunchuck... But, here's my issue. I tried it first by having the output from the listener be a 6-digit number... so, I'm using the (CInt(Val(StoredValue))) command and it's writing out 181130... and I can easily split it up selecting the Left(x,3) or Right(x,3)... I first rant that number through a Format("{0:000000}",x) so that even if one of the accx or accy numbers were a 2-digit number (so my overall number would only have 5-digits)... with this Format function... I'm always assured a 6-digit number. And this method works... except...
If the first group of numbers coming in only has 2-digits... So, lets say the accelerometer read out of the first one (accx) is 89. Let's say the accy read out is 119. So, when I run this through the Format function to make it have at least 6 digits, my number now reads 011989. So, if I were to take the first three numbers on the right, my read out would be 989... which is much higher than my expected (60-180 range that is really coming over the Serial Port)... So, I'm back to where I started... in that I need to figure out a better way to split up the data.
Which brings me to your method. I tried it as well... in fact, I added a comma in the serial readout, so the string coming out of the listener reads 89,119. So, I can use your trick to go look for a delimeter and then read to the left and right a certain number of digits... The problem I still have is that the data going into the function is a string, and thus even if I split the 3 digits to the right of the comma out (so, my output says 119)... it's still a string, and my number parameter is still red. In your picture above, was your original 181 130 a number or a string? My guess is that it was understood as a number, because your number parameters at the end are accepting the value. But, in my case... I'm still stuck with the inability to convert a string to a number... Does this make sense? And are their any other workarounds?…
Added by Andy Payne at 9:42am on September 3, 2009
mplex the models are. If we are running multi-room E+ studies, that will take far longer to calculate.
Rhino/Grasshopper = <1%
Generating Radiance .ill files = 88%
Processing .ill files into DA, etc. = ~2%
E+ = 10%
Parallelizing Grasshopper:
My first instinct is to avoid this problem by running GH on one computer only. Creating the batch files is very fast. The trick will be sending the radiance and E+ batch files to multiple computers. Perhaps a “round-robin” approach could send each iteration to another node on the network until all iterations are assigned. I have no idea how to do that but hope that it is something that can be executed within grasshopper, perhaps a custom code module. I think GH can set a directory for Radiance and E+ to save all final files to. We can set this to a local server location so all runs output to the same location. It will likely run slower than it would on the C:drive, but those losses are acceptable if we can get parallelization to work.
I’m concerned about post-processing of the Radiance/E+ runs. For starters, Honeybee calculates DA after it runs the .ill files. This doesn’t take very long, but it is a separate process that is not included in the original Radiance batch file. Any other data manipulation we intend to automatically run in GH will be left out of the batch file as well. Consolidating the results into a format that Design Explorer or Pollination can read also takes a bit of post-processing. So, it seems to me that we may want to split up the GH automation as follows:
Initiate
Parametrically generate geometry
Assign input values, material, etc.
Generate radiance/ E+ batch files for all iterations
Calculate
Calc separate runs of Radiance/E+ in parallel via network clusters. Each run will be a unique iteration.
Save all temp files to single server location on server
Post Processing
Run a GH script from a single computer. Translate .ill files or .idf files into custom metrics or graphics (DA, ASE, %shade down, net solar gain, etc.)
Collect final data in single location (excel document) to be read by Design Explorer or Pollination.
The above workflow avoids having to parallelize GH. The consequence is that we can’t parallelize any post-processing routines. This may be easier to implement in the short term, but long term we should try to parallelize everything.
Parallelizing EnergyPlus/Radiance:
I agree that the best way to enable large numbers of iterations is to set up multiple unique runs of radiance and E+ on separate computers. I don’t see the incentive to split individual runs between multiple processors because the modular nature of the iterative parametric models does this for us. Multiple unique runs will simplify the post-processing as well.
It seems that the advantages of optimizing matrix based calculations (3-5 phase methods) are most beneficial when iterations are run in series. Is it possible for multiple iterations running on different CPUs to reference the same matrices stored in a common location? Will that enable parallel computation to also benefit from reusing pre-calculated information?
Clustering computers and GPU based calculations:
Clustering unused computers seems like a natural next step for us. Our IT guru told me that we need come kind of software to make this happen, but that he didn’t know what that would be. Do you know what Penn State uses? You mentioned it is a text-only Linux based system. Can you please elaborate so I can explain to our IT department?
Accelerad is a very exciting development, especially for rpict and annual glare analysis. I’m concerned that the high quality GPU’s required might limit our ability to implement it on a large scale within our office. Does it still work well on standard GPU’s? The computer cluster method can tap into resources we already have, which is a big advantage. Our current workflow uses image-based calcs sparingly, because grid-based simulations gather the critical information much faster. The major exception is glare. Accelerad would enable luminance-based glare metrics, especially annual glare metrics, to be more feasible within fast-paced projects. All of that is a good thing.
So, both clusters and GPU-based calcs are great steps forward. Combining both methods would be amazing, especially if it is further optimized by the computational methods you are working on.
Moving forward, I think I need to explore if/how GH can send iterations across a cluster network of some kind and see what it will take to implement Accelerad. I assume some custom scripting will be necessary.…
d the workshop PDF from this link: http://goo.gl/bcvRNH Download event poster from this link: http://goo.gl/Q0KWCM Brief: Cairo is filled with barriers controlling people movements, suppressing them as well as detaining green and public spaces to the extent that most people have been taking these spaces for granted. Public spaces have been for a while the periphery of our daily life. We will explore in this workshop how we can manipulate and alter people’s perception and direct their attention to how these spaces are integral for city life. This exploration will be backed up by intensive technical tutorials introducing computational design and fabrication techniques and tools mainly Rhino, Grasshopper, Geco and Ecotect. Not only will this be the typical technical workshop, but rather you will also have the chance to be guided step by step on how these tools are used through out different design stages in a real world scenario. Design prototypes will be produced through 3D printing, the main workshop output will be a fabricated one to one functional model for one of the designs using our new in-house CNC machine. Tutors (check the PDF for bio): Olga Kovrikova, MArch DIA Alexandr Kalachev, MArch DIA Karim Soliman, MArch DIA Islam Ibrahim, MArch DIA Sherif Tarabishy, B.Sc. AAST Application: Application deadline 1 September 2013 ** For students (undergrad / Master), teachers and PhD proof of status is required (university ID with a date or a certificate of enrollment) to apply for the students package. Packages (choose one of the following in the application form): 1. Standard registration Course fee is 4250 EGP For Students 3500 EGP 2. Early bird registration discounted fee For Professionals 3750 EGP For Students 3000 EGP ** Early bird offer ends on 14 August 2013 3. Group registrations discounted fee (5 or more) For Students 20% off - You will have to fill out an application form here: http://goo.gl/0QxAga - You will need to submit your CV and Short Portfolio (max. 10 MB) to info@morph-d.com, email subject: “Morphing Norms Application” (we will decide if you are eligible for an early bird discount or not based on the date of your email submission) - We will confirm receiving emails from all applicants. Successful applicants will be contacted 5 days after each deadline (early bird/final) and will have to confirm participation within 3 days, if they fail to do so, places will be given to others on the waiting list. - A maximum of 30 applicants will be selected.
…
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
izes like 0.6m, 0.8m, 0.9m and 1.2m are the most "common": In cases where mechanical floors are a must (hospitals for instance) a 2.4/2.4 is quite handy (habitable/mechanical per floor). You can try 1.8/2.7 as well (floor/habitable) since 1.8 floor thickness can host HVAC and some decent W truss size. Also 1.6/2.4 (floor/habitable) is used in small buildings. NOTE: see next.
3. Don't forget to include corrugated metal height + concrete screed height + raised floors height: for the latter, say, something like 0.3m (modules + adjustable mounts + free space for electric stuff [boxes etc]).
4. As regards exteriors, Laurent Buzon is a close friend of mine. Contact him directly on my behalf:
http://www.buzonuk.com/
http://www.google.gr/url?sa=t&rct=j&q=&esrc=s&sourc...
5. LBS Structural ability and "monolithic" floor behavior (humans don't like vibrating habitable spaces) ARE not the same animal.…
ybee_EnergyPlus Window Shade Generator" component.
3. SolveAdj component has the input to set BC for interior surfaces.
If you want to set them to adiabatic then you can use setToAdiabatic components.
4. For natural ventilation Chris has provided extensive answers including this one.
If the component doesn't work then you need to download the files manually from github and replace the userObjects with the old ones. You have to do it separately for Ladybug and Honeybee which can be painful. Is there anyway to change the firewall settings?
…
ino Mc Neel, autore di "Architettura Parametrica - Introduzione a Grasshopper", il primo manuale su Grasshopper. I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali. Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni. Argomenti trattati: - Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow - Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici - Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler - Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC Verrà rilasciato un attestato finale. INFO E PRENOTAZIONI: http://www.arturotedeschi.com/wordpress/?p=2888…