ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
ort and export from the images below and also from the HELP file of DB in attachments (Page 71: Importing Geometric Data; Page 78-80: Import 3 - D CAD Data). In their HELP file, they mention about "import geometric data".
However, regarding the input of schedules, loads, constructions and etc., DB normally uses "Component " and "Template" (Page 29: Templates And Components; Page 591: Templates; Page 533: Components). "Templates" are databases of typical generic data, including Activity templates, Construction templates, Glazing templates, Facade templates, HVAC templates, Location Templates, and etc. "Component " are databases of individual data items (e.g. a construction type, material, window pane).
Both "Component " and "Template" are allowed to be imported and exported by using "Import / Export library data" command (.ddf format - DB Database File; Page 734: Import Components/Templates, Export Components/Templates). DB also allows us to build up our own libraries of templates and components (Page 731: Library Management; Page 733: Template Library Management).
In order to import both geometric information and other information related to schedules, loads, constructions and etc. from GH to BD, we supposed the following two ways:
1. GH(HB+GB) --> gbXML (both geometric and "Component " and "Template" information) --> DB
This is the way we most prefer. We did see information related to schedules, loads, constructions encoded in the gbXML file generated by GB, but still do not know the reason why DB did not take this information (I also mentioned this in Q6 within the gh file). We assume this might because the gbXML file we create encodes the schedules based on a different template / schema than the one DB expects. We also post this question to the DB forum for help.
(http://www.designbuilder.co.uk/component/option,com_forum/Itemid,25/page,viewtopic/p,13755/#13755)
2. GH(HB+GB) --> gbXML (geometric information only) + .ddf ("Component " and "Template" information only) --> DB
If the first way doesn't work and DB only takes geometric information from the gbXML, then we might think of the other way - generating the .ddf files from GH(HB+GB) to pass the schedule, load and construction information to DB.
I was wondering if it is feasible for HB and GB to have this function? And what is your suggestion to achieve this?
In addition, we notice that DB can export XML files (not gbXML), so we are trying to figure out if DB also accepts / reads the XML file. If so, we might be able to convert the gbXML (with both geometric and schedule information) to XML. What do you think about that?
Thank you again for all your help!
Best,
Ding
DB import
DB export
Template libraries
Component libraries
…
y using the Honeybee_Update Honeybee component.
The video below (best viewed in full-screen mode) provides an idea of what these components are capable of being used for:
The video below shows how these components can be used in an existing Honeybee project (for additional links please open this video in youtube):
I have uploaded two examples as Hydra files that show how these components can be used for grid-point and image-based simulations:
Example1 : Grid Point Calculations
Example2: Image based simulation
Finally, a more esoteric application is demonstrated in this video:
These components are still in the beta-testing stage. Some of the limitations of the components are:
1. Only Type C photometry IES files are supported at present.
2. Rhino is likely to get sluggish if there are too many luminaires (i.e. light fixtures) present in a scene.
3. Due to the spectral limitations of the ray-tracing software (RADIANCE), simulations involving color mixing might not be physically realizable.
Additional details about photometric and spectral calculations are probably an overkill for this forum. However, I'd be glad to answer any related questions. Please report any bugs or request new features either on this forum or on Github.
Mostapha, Leland Curtis, Reinhardt Swart and Dr. Richard Mistrick provided valuable inputs during the development of these components.
Thanks,
Sarith
Update 16th January 2017:
An example with some new components and bug fixes since the initial release announcement can be found here
…
bi-directional link, the link is unidirectional (downflow only), because of the use of proxies.
Matrix transforms and persistent constraints: I don't think this is true. The parts can have mates to other parts that preserve geometric relationships like 'coincident' , 'aligned' etc. These are essentially bi-directional. GH's algorithmic approach does not do relationships in the same / flexible way. In GH, the 'relationship' has to be part of the generation method that dependent on the creation sequence. I.e. draw line 2 perpendicularly from the end of point of line 1. If you are thinking about parts or assemblies sharing, or referencing parameters as part of the regen process, this is also possible. iLogic does this, and adds scripting. So does Catia. Inventor/iLogic can also access Excel and have all the parameter processing done centrally, if required.
Consequently, scripting the placement of components is irrelevant in GH, unless you decide that each component needs to be contained in its own separate file.
I wouldn't be too hasty here. Yes, you are right about compartmentalisation. I think this needs to happen with GH, in order to deal with scalability/everyday interoperability requirements. Confining projects to one script is not sustainable. MCAD apps have been doing this for ages with 'Relational Modeling'.The Adaptive Components placement example illustrates that it is beneficial to be able to script some 'hints' that can be used on placement of the component. Say, if your component requires points as inputs, then its should be able to find the nearest points to the cursor as it moves around. I think Aish's D# / DesignScript demo'd this kind of behaviour a few years ago. Similarly, Modo Toolpipe reminds me how a lot of UI based transactions can be captured as scripts (macro recorder etc). Allowing this input to be mixed in and/or extended by GH I think will yield a lot of 'modeling efficiency' around the edges. This is a (mis)using GH as an user-programmable 'jig' for placing/manipulating 'dumb' elements in Rhino. It may even give the 'dumb elements' a bit more 'intelligence' by leaving behind embedded attributes, like links to particular construction planes etc.Even if we confine ourselves to scripting. GH is a visual or graphic programming interface. A lot of 'insert and connect' tasks can be done more easily using graphic methods. If we need to select certain vertices on a mesh as inputs for, say, a facade panel, its going to be quicker to do this 'graphically' (like the AC example), then ferreting out the relevant indices in the data tree et al. The 'facade panel' script would then have some coding to filter/prompt the user as to what inputs were acceptable, and so on.
This also brings up the point that generating components and assemblies in MCAD is not as straightforward. In iParts and iAssemblies, each configuration needs to be generated as a "child" (the individual file needs to be created for each child) before those children can be used elsewhere.
Not sure what you mean here. If the i-parts are built up using sketches /profiles or other more rudimentary features (like Revits' profile/face etc family templates) then reuse should be fairly straight forward. I suppose you could make it like GH scripting, if you cut and paste or include script snippets that generate the desired Inventor features.
One of the reasons why the distributed file approach makes perfect sense in MCAD, is that in industry you deal with a finite set of objects. Generative tools are usually not a requirement. Most mechanical engineers, product engineers and machinists would never have any use for that.
I don't think this is true. Look at the automotive body design apps, which are mostly Catia based. All of the body parts are pretty much 'generative' and generated from splines, in a procedural way, using very similar approaches to GH. Or sheet metal design. It's not always about configuration of off-the-shelf items like bolts. And, the constraints manager is available to arbitrate which bit of script fires first, and your mundane workaday associative dimensions etc can update without getting run over by the DAG(s) :-)
…
levator over the automobile, complex issues are at play in concentrating population and built infrastructure in contemporary high-rise cities. How do you meet the challenges of system design for high quality compact urban environments?
The Smartgeometry Workshop is a unique creative cauldron attracting attendees from across the world of academia, professional practice and industry. The workshop is open to 100 applicants who come together for four intensive days of design and collaboration.
More Info and to Apply
The application deadline to attend the sg2014 Workshop has been extended to June 1st, 2014 at midnight PST. Reviews and early notifications will proceed for those who have already applied.
Image: Cities without Ground - Adam Frampton, Jonathan D Solomon and Clara Wong
WORKSHOP CLUSTERS
The sg2014 Workshop will be organised around Clusters. Clusters are hubs of expertise. They comprise of people, knowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The sg2014 Workshop is made up of ten Clusters that respond in diverse ways to the challenge Urban Compaction.
sg2014 WORKSHOP CLUSTERS
The Bearable Lightness of Being
Block
Deep Space
Design Space Exploration
Flows, Bits, Relationships
Fulldome Projections
HK_smarTowers
Private Microclimates
Resilient Networks
Spaces in Experience
CONFERENCE
After four intense days of innovative work, the 2-day sgConference offers an opportunity for critical reflection on what has been accomplished in the Workshop and in the global design arena. It will be an opportunity to open debates, pose questions, challenge orthodoxies, and propose new ideas.
The sgConference features invited keynote speakers showcasing major projects and research from around the globe, mixed with panel sessions for open debate. The end of the first day will include reports and highlights from the Workshop, giving an opportunity to view work created during the previous four days of intensive collaboration, design and development, followed by an exhibition of the work.
Invited Speakers & Panelists:Carlo Ratti Sensable City Lab, MITCristiano Ceccato Zaha HadidTom Kvan & Justyna Karakiewicz Melbourne UniversityJun Sato Jun Sato Structural EngineersMario Carpo Yale UniversityEddie Can Zaha HadidLi Xinggang Atelier Li Xinggang, China Architecture Design & Research GroupMartin Reise FrontPhilip Yuan Tongji ShanghaiYusuke Obuchi Tokyo UniversityYusushi Ikada Ikada-Lab Keio University, Japan
Additional speakers to be announced soon. Registration to open soon.
www.Smartgeometry.org…
This blog post is a rough approximation of the lecture I gave at the AAG10 conference in Vienna on September 21st 2010. Naturally it will be quite a different experience as the medium is quite…
Added by David Rutten at 3:27pm on September 24, 2010
.
Things have been working swimmingly in many areas of the plugin, but one particular problem has been tough to solve. I have two components that are trying to read/write to the same memory at the same time, causing Rhino exceptions and crashes.
The conflicts appear to be happening between two components -- one is a "Layer Events Listener" that reports essentially what type of layer event just happened. The other is a "Set Layer Visibility" component that toggles the visibility of a list of layers.
The code:
public class LayerTools_LayerEventsListener : GH_Component { /// <summary> /// Initializes a new instance of the LayerTools_LayerListener class. /// </summary> public LayerTools_LayerEventsListener() : base("Layer Events Listener", "Layer Listener", "Get granular information about the layer events happening in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to listen to layer events in the Rhino document.", GH_ParamAccess.item, false); pManager.AddTextParameter("Exclusions", "E", "Provide a list of exclusions to stop reading specific events (Added, Deleted, Moved, Renamed, Locked, Visibility, Color, Active).", GH_ParamAccess.list); pManager[1].Optional = true; }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddBooleanParameter("Initialized", "I", "Whether the listener changed from passive to active.", GH_ParamAccess.item); pManager.AddTextParameter("Document Name", "doc", "Name of the Rhino document that is changing.", GH_ParamAccess.item); pManager.AddTextParameter("Layer Path", "path", "Path of the modifed layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Layer Index", "ID", "Index of the modified layer.", GH_ParamAccess.item); pManager.AddIntegerParameter("Sort Index", "SID", "Sort index of the modified layer.", GH_ParamAccess.item); pManager.AddTextParameter("Event Type", "T", "Type of the modification.", GH_ParamAccess.item); pManager.AddBooleanParameter("Added", "A", "If the layer has been added.", GH_ParamAccess.item); pManager.AddBooleanParameter("Deleted", "D", "If the layer has been deleted.", GH_ParamAccess.item); pManager.AddBooleanParameter("Moved", "M", "If the layer has been moved.", GH_ParamAccess.item); pManager.AddBooleanParameter("Renamed", "R", "If the layer has been renamed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Locked", "L", "If the layer locked setting has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Visibility", "V", "If the layer's visibility has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Color", "C", "If the layer's color has changed.", GH_ParamAccess.item); pManager.AddBooleanParameter("Active", "Act", "If the active layer has changed.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; List<string> exclusions = new List<string>();
DA.GetData(0, ref active); DA.GetDataList(1, exclusions);
RhinoDoc thisDoc = null;
bool initialize = false;
string dName = null; string activePath = null; int layerIndex = -1; int sortIndex = -1; string eventType = null; bool added = false; bool deleted = false; bool moved = false; bool renamed = false; bool locked = false; bool visibility = false; bool color = false; bool current = false;
if (active) { thisDoc = RhinoDoc.ActiveDoc;
initialize = (!previouslyActive) ? true : false;
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; RhinoDoc.LayerTableEvent += RhinoDoc_LayerTableEvent; previouslyActive = true;
} else {
RhinoDoc.LayerTableEvent -= RhinoDoc_LayerTableEvent; previouslyActive = false; }
if (ev != null) { dName = ev.Document.Name; layerIndex = ev.LayerIndex; eventType = ev.EventType.ToString();
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Current") { // active layer has just been changed current = true; }
}
if (!exclusions.Contains("Moved")) { if (ev.EventType.ToString() == "Sorted") { // active layer has just been changed moved = true; }
}
if (!exclusions.Contains("Added")) { if (ev.EventType.ToString() == "Added") { // layer has just been added activePath = ev.NewState.FullPath; added = true; }
}
if (!exclusions.Contains("Active")) { if (ev.EventType.ToString() == "Deleted") { // layer has just been added
deleted = true; } }
if (ev.EventType.ToString() == "Modified") { // layer has been modified activePath = ev.NewState.FullPath;
//skip sortindex eventType = ev.EventType.ToString();
if (ev.OldState != null && ev.NewState != null) { if (!exclusions.Contains("Locked")) { if (ev.OldState.IsLocked != ev.NewState.IsLocked) locked = true;
} if (!exclusions.Contains("Visibility")) { if (ev.OldState.IsVisible != ev.NewState.IsVisible) visibility = true; }
if (!exclusions.Contains("Moved")) { if (ev.OldState.ParentLayerId != ev.NewState.ParentLayerId) moved = true; }
//if (ev.OldState.SortIndex != ev.NewState.SortIndex) moved = true; if (!exclusions.Contains("Renamed")) { if (ev.OldState.Name != ev.NewState.Name) renamed = true; }
if (!exclusions.Contains("Color")) { if (ev.OldState.Color != ev.NewState.Color) color = true; } }
} }
DA.SetData(0, initialize); DA.SetData(1, dName); DA.SetData(2, activePath); DA.SetData(3, layerIndex); DA.SetData(4, sortIndex); DA.SetData(5, eventType); DA.SetData(6, added); DA.SetData(7, deleted); DA.SetData(8, moved); DA.SetData(9, renamed); DA.SetData(10, locked); DA.SetData(11, visibility); DA.SetData(12, color); DA.SetData(13, current);
}
static bool previouslyActive = false; Rhino.DocObjects.Tables.LayerTableEventArgs ev = null;
void RhinoDoc_LayerTableEvent(object sender, Rhino.DocObjects.Tables.LayerTableEventArgs e) { ev = e;this.ExpireSolution(true); }
And for the layer visibility component:
public LayerTools_SetActiveLayer() : base("Set Active Layer", "SetActiveLayer", "Set the active layer in the Rhino document.", "Squirrel", "Layer Tools") { }
/// <summary> /// Registers all the input parameters for this component. /// </summary> protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { pManager.AddBooleanParameter("Active", "A", "Set to true to change the active layer in Rhino.", GH_ParamAccess.item, false); pManager.AddTextParameter("Path", "P", "Full path of the layer to be activated.", GH_ParamAccess.item); }
/// <summary> /// Registers all the output parameters for this component. /// </summary> protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { pManager.AddIntegerParameter("Layer ID", "ID", "Index of layer that has been activated.", GH_ParamAccess.item); pManager.AddBooleanParameter("Status", "St", "True when the layer has been activated.", GH_ParamAccess.item); }
/// <summary> /// This is the method that actually does the work. /// </summary> /// <param name="DA">The DA object is used to retrieve from inputs and store in outputs.</param> protected override void SolveInstance(IGH_DataAccess DA) { bool active = false; string path = "";
if (!DA.GetData(0, ref active)) return; if (!DA.GetData(1, ref path)) return;
int layer_index = -1; bool status = false;
if (path != null) {
Rhino.RhinoDoc doc = Rhino.RhinoDoc.ActiveDoc; Rhino.DocObjects.Tables.LayerTable layertable = doc.Layers;
layer_index = layertable.FindByFullPath(path, true);
if (layer_index > 0) { // if exists RhinoDoc.ActiveDoc.Layers.SetCurrentLayerIndex(layer_index, true); status = true; } }
DA.SetData(0, layer_index); DA.SetData(1, status); }
Now originally I was getting exceptions when changing multiple layers' visibility properties, which would cause the Event Listener to fire and try to read the Visibility property before the memory has been released by the Set Layer Visibility component. That led me to add an "Exceptions" input, that would allow me to disable the reading of Visibility events at the source in the Layer Events listener. That helped me manage about 95% of the crashes I was getting, but I still get strange crashes in other event properties, even when that property shouldn't be affected. For instance, I am getting a crash here on the Name property in the event from the delegate function, even though I am only changing Visibility at any one time:
I have a few ideas but they all seem pretty hacky. One is to try to set a flag that is readable by any component in the plugin -- so that the event listener can see if a "set" component is currently running and abort before causing an exception. The other is creating a delay in the event listener, somthing like 200ms, to allow any set components to finish what they are doing before reading the event. Neither seems super ideal.
Any ideas?
Thanks,
Marc
…
currently within a fake euphoria framework - blame China/UAE) and a potential decision about doing/developing this or doing that … well …anyway … read and enjoy.
AEC matters: The good, the bad and the ugly.
The bad news: Rhino is NOT suitable for the job (although some use it … but only in the sense that people use Modo for the so called “hard modeling”). By job I mean things up to shop drawing level + specs + you and me (we call it Final level) – nothing to do with sketches and outlines of some abstract “schematic” topology.
The ugly news: The so called Design-Construct approach gains exponentially momentum especially in countries the likes of China/UAE/BRICS (95% of the whole AEC activity worldwide happens there). DeCo means: AEC engineers deliver some kind of study in a preliminary level and the main contractor splits (outsourcers) the job and assigns the study completion AND the construction to various sup-constructors. That thing appeared first – in a large scale - in Dubai 15 years ago. This means that the era of Sergio Pininfarina is over and out: welcome anonymous Toyota designer. In plain English: days of construction corporations fast replacing practices. Dead men walking.
The good news: All AEC related apps (Revit, AECOsim, Allplan and the likes) are in a lethargic state as regards the brave new world (based on the archaic level driven organization schemas etc etc). Of course they all claim the exact opposite and point that support BIM (nobody mention PLM) better than the other guy. But the 21st century – helped by 2 forthcoming unavoidable crisis (a) about shortage of water (b) about transition from carbon to hydrogen economy – isn’t about bureaucracy: think cost/resources optimization and “fitness” rather than China/UAE type of liquid trend. Days of euphoria fast approaching the Wall.
Top to bottom and visa versa.
Old days Titans (Oscar, Mies, Walter, Pierre Luigi, Frank, Eero, blah blah) outlined things (mostly using crayons) and the rest were struggling to translate these in reality in an one way vector like process : Top to bottom that is. These days the inverse gains momentum : when in the whole consider the part … validate … redo … validate … redo. This means bottom to top geared with top-to-bottom. In plain English : child imposes rules to parent and parent imposes rules to child. This means classic MCAD feature/history modeling (CATIA/NX/MS). This is something that Rhino can’t do (not to mention that Rhino is a surface modeler – a rather critical fact).
The parts that are bigger than the whole.
Go there ( http://www.behance.net/gallery/2885057/a-myriad-of-cables) are inspect the whole thing: it’s a parametric nightmare made with the other guy (Generative Components – slower than a Skoda + bugs + why bother?). But the whole (masts and membranes and the likes) means nothing here: focus to the details that are critical for connecting this with that. Complex feature driven solids that are made with internal (on a per se basis) parameters (like fillets required for casting or radius for cable anchoring) whilst they comply with external rules/parameters (cable angles, topology clash issues etc etc). So the whole outlines possibilities … and the part either can follow…or the part must change…or the whole must change. Can you do that with GH/Rhino? And if not what’s missing? (lot’s of things to be honest).
Some other "similar" things:
The narrow picture.
I agree with what others already said and with pretty much all Ola’s points – especially the visual drag-and-drop path mapper (i.e. a visual data manipulator so to speak) and the enable/disable components in groups capability.
Some other suggestions:
A multi canvas capability. As things are right now…it’s like working in Rhino in one view (rather unsuitable I guess). In fact …since overlapping views they don’t work in Rhino…well…you know, he he.
A working auto profile arrangement capability (non twisted Loft/Sweep and the likes). Worth 1Bn dollars that one.
Ability to locate components that caused this or that in the Rhino view: meaning a 2 way communication approach : GH makes things happen in Rhino and things can indicate their cause in the GH canvas.
A robust collection of components that bake stuff in nested blocks (emulating some primitive assembly/component way of thinking). Why may you ask? Well … the whole objective is to talk to CATIA (via STEP) don’t you agree? CATIA makes things happen in real-life not Rhino.
A robust collection of components that can create real-life parametric tensile membrane solutions (get some inspiration from FormFinder: useless because it’s academic but good to point the way). Membranes (and geodesics) are the future.
I could continue at infinitum but IMHO the big picture is worth 12345,67 “focused” GH improvements.
May the Force (the dark option) be with us all.
…