TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
have some spare time please fill in my 3D Printing Open Survey - If you could make almost anything, what would it be ? Updated results are publicly available after completing questionnaire (Please press "Wyślij" - Send button and "Wyniki ankiety" - Results button at the end). This survey will be used to evaluate demand for 3d printing services globally. It consist of 30 questions about: - open-source 3d printers - future of additive manufacturing - 3d printing services - ecology in 3d printing - copyright issues and 3d printing Three example questions: 2. Which of the following 3d printing applications is the most interesting? * - Things personalization - Printing food - Attempts to print structures resembles in functioning living tissues or blood vessels - Creating impossible or difficult to create by using conventional technology things - Printing rooms or buildings on earth/moon - Printing chemical compounds (for example drugs) - Using in renewable energy sources - Printing parts and/or mechanical vehicles 3 . Have you ever heard about cheap DIY 3D Printers (for example RepRap, PrintrBot, MakiBox A6) ? * DIY - Do It Yourself - Yes - No 4 . When 3D Printers will become one of the typical household appliances ? * - After 5 years - After 10 years - After 15 years - After 20 years or later - Never - I don't know Feel free to ask questions!…
wing exception will be thrown:
Message: Cannot import name minimum_edge_cut
Traceback:line 60, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\algorithms\__init__.py"line 21, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\generators\classic.py"line 5, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\generators\__init__.py"line 84, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\__init__.py"
I would inform you that I have also copied the Networkx library into "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\" and have specified this directory in "Python Options->Files->Module Search Paths" so that Rhino/Grasshopper knows where to access this library.
Could you please help me how can I sort this out?
Any comment is highly appreciated.
Shayan…
n make it possible to Motivation generate
a variety of interesting objects, from abstract fractals to plant-like
branching structures, their modeling power is quite limited. A major
problem can be traced to the reduction of all lines to integer multiples
of the unit segment. As a result, even such a simple figure as an
isosceles right-angled triangle cannot be traced exactly, since the ratio
of its hypotenuse length to the length of a side is expressed by the irrational
number √2. Rational approximation of line length provides only
a limited solution, because the unit step must be the smallest common
1
1
√2
denominator of all line lengths in the modeled structure. Consequently,
the representation of a simple plant module, such as an internode, may
require a large number of symbols. The same argument applies to angles.
Problems become even more pronounced while simulating changes
to the modeled structure over time, since some growth functions cannot
be expressed conveniently using L-systems. Generally, it is difficult
1.10. Parametric L-systems 41
to capture continuous phenomena, since the obvious technique of discretizing
continuous values may require a large number of quantization
levels, yielding L-systems with hundreds of symbols and productions.
Consequently, model specification becomes difficult, and the mathematical
beauty of L-systems is lost.
In order to solve similar problems, Lindenmayer proposed that numerical
parameters be associated with L-system symbols [83]. He illustrated
this idea by referring to the continuous development of branching
structures and diffusion of chemical compounds in a nonbranching filament
of Anabaena catenula.
The following is an example of its application:
starting string: A
p1: A F(1)[+A][-A]
P2: F(s) F(s*R)
which I think is basically trying to say
F(s) = move forwar a step of length s > 0.
Thanks again,
Mateo…
t BBox will then be mapped relative to the UVW space of that box to the new target boxes.
Where your definition is slipping up is the data matching aspect of GH. You have two lists (that count). One list contains 100 items of target boxes and the other contains 2 items of geometry. GH defaults to the Longest List data matching
List A --> List B
Target Box A0 --> Cuboid
Target Box A1 --> Cylinder
Target Box A2 --> (Oops List B has run out of items. Now GH will repeat the last item = Cylinder)
Target Box A3 --> Cylinder
.....
Target Box J9 --> Cylinder
Solution
There are two approaches to rectify this the most logical would be to group the geometries into one object (What you had in mind with the bounding box) to do this use the Group Component on the Transform Tab > Utility Panel.
The other approach is far more common in GH mentality. Use the Graft, right click the G input of Morph and select Graft from the Context Menu. This places all of the items in the List on to separate branches. Creating a list of lists (although these new list only have one item). When GH now tries to data match them it will apply the whole of the first geometry list (Only the Cuboid) to all of the target boxes and all of the second list (Cylinder) to the target boxes again.
I hope this helps…
ther math and logic. i can usually conceptualise what i want to do and cobble some semi working thing together but don't know which components to use and how to patch it. so i'm super happy to have someone who knows what he's doing to find this interesting.
and i'm glad you mention the fanned frets again, there is one input parameter that's still missing for the multiscale frets to be fully parametric, it's the angle of the nut or which fret should be straight. it depends a bit on personal preferences and playing posture what is more comfortable. so being able to adjust this easily would be cool. again i have no idea how the maths for that work or if you can just rotate each fret the same amount around it's middle point. The input either as fret number (for the straight fret) or as a simple slider from bridge to nut should do as input setting.
Here are the two extremes and the middle ground:
i've been thinkin today while analysing your patches and cleaning up my mess what exactly the monster should do.
Here are the input parameters needed, i think it's the complete list
scale length low E string
scale length high e string
fret angle/straight fret
string width at nut
string width at bridge
number of frets
fretboard overhang at nut (distance from string to fretboard bounds)
fretboard overhang at last fret
string gauges
string tensions
fretboard radius at nut (for compound radius fretboard radius at bridge is calculated with the stewmac formula)
fretwire crown width
fretwire crown height
action height at nut (distance between bottom of string and fretwire crown top)
action height at last fret
pickup 1 neck position
pickup 2 middle position
pickup 3 bridge position
nut width
the pickup positions should be used to draw circles for the magnet poles on each string so they are perfectly aligned and can be used for the pickup flatwork construction. ideally they would need a rotation control aligning the center line of the pickup so it's somewher between the last fret angle and bridge angle. personally i do this visually depending on the design i'm looking for, some people have huge theories on pickup positioning but personally i don't believe in it.
that should result in everything needed to quickly generate all the necessary construction curves or geometry for nut/fingerboard/frets/pickups. this is the core of what makes a guitar work, the more precise this dynamic system is the better the guitar plays and sounds.
i posted another thread trying to understand how i could use datasets form spreadsheets,databse, csv to organize the input parameters. What would make sense for the strings for example is hook into a spreadsheet with the different string sets, i attached one for the d'Addario NYXL string line which basically covers all combos that make sense.
The string tension is an interesting one, and implmenting it would sure be overkill albeit super interesting to try. it should be possible to extrapolate from the scale length of each string what the tension for a given string gauge of that string would be so that you could say 'i want a fully balanced set' or 'heavy top light bottom) and it would calculate which SKU from d'addario would best match the required tension. All the strings listed in the spreadsheet are available as single strings to buy.
i'm trying to reorganize everything which helps me understand it. i just discovered the 'hidden wires' feature which is great since once i understood what a certain block does or have finished one of my own, i can get the wires out of the way to carry on undistracted. a bit risky to hide so many wires but it makes it so much easier not to get completely lost :-)
btw, the 'fanned fret' term is trademarked, some guy tried to patent it in the 80's which is a bit silly since it has been done for centuries. there is a level of sophistication above this as well, check out http://www.truetemperament.com/ and that really is something else. it really is astounding how superior the tuning is on those wigglefrets, the problem is that it's rather awkward for string bending and also you can't easily recrown or level the frets when they are used. …
e matching with a dedicated component which creates combinations of items. You can find the [Cross Reference] component in the Sets.List panel.
When Grasshopper iterates over lists of items, it will match the first item in list A with the first item in list B. Then the second item in list A with the second item in list B and so on and so forth. Sometimes however you want all items in list A to combine with all items in list B, the [Cross Reference] component allows you to do this.
Here we have two input lists {A,B,C} and {X,Y,Z}. Normally Grasshopper would iterate over these lists and only consider the combinations {A,X}, {B,Y} and {C,Z}. There are however six more combinations that are not typically considered, to wit: {A,Y}, {A,Z}, {B,X}, {B,Z}, {C,X} and {C,Y}. As you can see the output of the [Cross Reference] component is such that all nine permutations are indeed present.
We can denote the behaviour of data cross referencing using a table. The rows represent the first list of items, the columns the second. If we create all possible permutations, the table will have a dot in every single cell, as every cell represents a unique combination of two source list indices:
Sometimes however you don't want all possible permutations. Sometimes you wish to exclude certain areas because they would result in meaningless or invalid computations. A common exclusion principle is to ignore all cells that are on the diagonal of the table. The image above shows a 'holistic' matching, whereas the 'diagonal' option (available from the [Cross Reference] component menu) has gaps for {0,0}, {1,1}, {2,2} and {3,3}:
If we apply this to our {A,B,C}, {X,Y,Z} example, we should expect to not see the combinations for {A,X}, {B,Y} and {C,Z}:
The rule that is applied to 'diagonal' matching is: "Skip all permutations where all items have the same list index". 'Coincident' matching is the same as 'diagonal' matching in the case of two input lists which is why I won't show an example of it here (since we are only dealing with 2-list examples), but the rule is subtly different: "Skip all permutations where any two items have the same list index".
The four remaining matching algorithms are all variations on the same theme. 'Lower triangle' matching applies the rule: "Skip all permutations where the index of an item is less than the index of the item in the next list", resulting in an empty triangle but with items on the diagonal.
'Lower triangle (strict)' matching goes one step further and also eliminates the items on the diagonal:
'Upper Triangle' and 'Upper Triangle (strict)' are mirror images of the previous two algorithms, resulting in empty triangles on the other side of the diagonal line:
…