ll geometry.
The difference with programs like Inventor is that they are made for production, regardless of the fabrication method. I won't go into detail about that, and instead focus on the modeling process.
In this little model, the starting point actually is a bit obvious, the foundation.
The only contents in the 3dm file are 27 lines. These indicate the location of each footing, and the direction of the tilt of each column. Everything else is defined in GH with the use of numbers as input parameters.
Needless to say, instead of those lines you could obviously generate lines and control the number of columns and panels, hence establish their layout, with any algorithmic or non-algorithmic criteria you please. That marks a major difference between GH and Inventor.
You can generate geometry with Inventor via scripting/customization (beyond iLogic), with transient graphics for visual feedback similar to GH's red-default previews. However Inventor's modeling functions are not set to input and output data trees. I won't go into detail on that, but suffice to say that the data tree associativity of GH was for me the first major difference I noticed. I've used other apps with node diagram interfaces like digital fusion for non-linear video editing since the late 90's, so the canvas did not call my attention when I first started using GH.
Anyways, here's a screen capture of the foundational lines:
In the first group of components, the centerlines of the rear columns are modeled:
And the locations in elevation for connection points are set. Those elevations were just numbers I copied from Excel, but you can obviously control that any way you please. I was just trying to model this quickly.
The same was done for the rear columns:
The above, believe it or not, took me the first 5 hours to get.
Here's a screen capture of what the model and definition looked like after 4 hours, not much:
If you're interested, next post I can get into the sketching part you mentioned, which is a bit cumbersome with GH, but not really.
I wouldn't say that using GH to do this little model was cumbersome, it just needed some thinking at the beginning. You do similar initial thinking when working with a feature-based modeler.…
Added by Santiago Diaz at 12:44am on February 24, 2011
akes the linear regression of the Schroeder integral over 30 dB worth of decay. Whether it is T-15 or T-30, they all seek to estimate the RT, which is always always the time it takes for sound to decay 60 decibels.
The website has benchmarks, for your reference. You can find them under the 'Pachyderm' drop down menu, under 'Benchmarks'.
Your model may well require millions of rays to be accurate. It sounds like a very large space. I'm sorry if that is an unpleasant answer. Sometimes it does help to have a computer with more cores to help with this. I have gotten up to 90% processor usage on a 12 core machine before.
Arthur…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…
what they really mean by that, as in what buttons to push, so I assume it's a Windows Path entry?
2.) Modify PATH
Add the install location on the path, this is usually: C:\Program File\IronPython 2.7
But on 64-bit Windows systems it is: C:\Program File (x86)\IronPython 2.7
As a check, open a Windows command prompt and go to a directory (which is not the above) and type:
> ipy -V PythonContext 2.7.0.40 on .NET 4.0.30319.225
Tutorial on setting a Windows environmental variable (path):
http://www.computerhope.com/issues/ch000549.htm
But this fails to point out that path contains many entries already separated by semicolons so if I merely add a new variable called "path" it's likely that I will destroy existing program function. There's no info on how to just tack on another entry, and the Windows 7 edit box doesn't even show the whole collection, but one item (!), so I copied the existing path into a text editor to see the whole collection successfully and added the C:\Program Files (x86)\IronPython 2.7 entry after an added semicolon, correcting for an Enthought page typo of no 's' on the end of "Program Files". I also checked the others and many pointed to old missing directories so I deleted those entries.
...and the test fails and "ipy" is not recognized as a command, even though the path now shows up using "path" in the Windows CMD window, that is if I copy all by right clicking and pasting the stuff into a text editor to really view it all. I can run it from the source directory just fine.
The rabbit hole was indeed deep. Using the Task Manager (control-alt-delete) to kill Explorer and then Run in the menu to restart "Explorer," along with restarting the Windows CMD window however, worked. I can now invoke Iron Python ("ipy") via command line from any directory. For the "path" I edited path in the System Variables and not the User Variables. No, you don't have to type that whole crazy line above just to test the path variable, just "ipy" (and control-Z to quite IronPython) in the CMD window invoked by typing "cmd" into the Start menu search box.
From the CMD line this step did work fine:
3.) ironpkg
Bootstrap ironpkg, which is a package install manager for binary (egg based) Python packages. Download ironpkg-1.0.0.py and type:
> ipy ironpkg-1.0.0.py --install
Now the ironpkg command should be available:
> ironpkg -h(some useful help text is displayed here)
But of course Step 4 fails, giving pages of what seem to be error messages;
C:\Users\Nik>ironpkg scipy
Traceback (most recent call last):
File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.
py", line 92, in write_data_from_url
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 126, in urlo
pen
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 397, in open
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 509, in http
_response
...
Why can't I just download Numpy as a normal file and thus also have it easy for other users to install it when they use my scripts? This is just crazy and lazy. The Enthought developer has turned this into a computer game, with a missing registration link and then the last step spits out errors with utterly no information on how to fix it manually.
This Step 4 error is covered here:
http://discourse.mcneel.com/t/trying-to-import-numpy-in-rhino-python-but-im-getting-this-error-cannot-import-multiarray-from-numpy-core/12912/16…
Added by Nik Willmore at 2:36pm on October 11, 2015
d the workshop PDF from this link: http://goo.gl/bcvRNH Download event poster from this link: http://goo.gl/Q0KWCM Brief: Cairo is filled with barriers controlling people movements, suppressing them as well as detaining green and public spaces to the extent that most people have been taking these spaces for granted. Public spaces have been for a while the periphery of our daily life. We will explore in this workshop how we can manipulate and alter people’s perception and direct their attention to how these spaces are integral for city life. This exploration will be backed up by intensive technical tutorials introducing computational design and fabrication techniques and tools mainly Rhino, Grasshopper, Geco and Ecotect. Not only will this be the typical technical workshop, but rather you will also have the chance to be guided step by step on how these tools are used through out different design stages in a real world scenario. Design prototypes will be produced through 3D printing, the main workshop output will be a fabricated one to one functional model for one of the designs using our new in-house CNC machine. Tutors (check the PDF for bio): Olga Kovrikova, MArch DIA Alexandr Kalachev, MArch DIA Karim Soliman, MArch DIA Islam Ibrahim, MArch DIA Sherif Tarabishy, B.Sc. AAST Application: Application deadline 1 September 2013 ** For students (undergrad / Master), teachers and PhD proof of status is required (university ID with a date or a certificate of enrollment) to apply for the students package. Packages (choose one of the following in the application form): 1. Standard registration Course fee is 4250 EGP For Students 3500 EGP 2. Early bird registration discounted fee For Professionals 3750 EGP For Students 3000 EGP ** Early bird offer ends on 14 August 2013 3. Group registrations discounted fee (5 or more) For Students 20% off - You will have to fill out an application form here: http://goo.gl/0QxAga - You will need to submit your CV and Short Portfolio (max. 10 MB) to info@morph-d.com, email subject: “Morphing Norms Application” (we will decide if you are eligible for an early bird discount or not based on the date of your email submission) - We will confirm receiving emails from all applicants. Successful applicants will be contacted 5 days after each deadline (early bird/final) and will have to confirm participation within 3 days, if they fail to do so, places will be given to others on the waiting list. - A maximum of 30 applicants will be selected.
…
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…