izes like 0.6m, 0.8m, 0.9m and 1.2m are the most "common": In cases where mechanical floors are a must (hospitals for instance) a 2.4/2.4 is quite handy (habitable/mechanical per floor). You can try 1.8/2.7 as well (floor/habitable) since 1.8 floor thickness can host HVAC and some decent W truss size. Also 1.6/2.4 (floor/habitable) is used in small buildings. NOTE: see next.
3. Don't forget to include corrugated metal height + concrete screed height + raised floors height: for the latter, say, something like 0.3m (modules + adjustable mounts + free space for electric stuff [boxes etc]).
4. As regards exteriors, Laurent Buzon is a close friend of mine. Contact him directly on my behalf:
http://www.buzonuk.com/
http://www.google.gr/url?sa=t&rct=j&q=&esrc=s&sourc...
5. LBS Structural ability and "monolithic" floor behavior (humans don't like vibrating habitable spaces) ARE not the same animal.…
ybee_EnergyPlus Window Shade Generator" component.
3. SolveAdj component has the input to set BC for interior surfaces.
If you want to set them to adiabatic then you can use setToAdiabatic components.
4. For natural ventilation Chris has provided extensive answers including this one.
If the component doesn't work then you need to download the files manually from github and replace the userObjects with the old ones. You have to do it separately for Ladybug and Honeybee which can be painful. Is there anyway to change the firewall settings?
…
Refinement component at first, possibly using MeshMachine instead which is slow but actually gives many fewer triangles and adaptive meshing for tight curves too. Neither are easy to adjust on a deadline!
Then you have to sneak up on workable settings, using only a few lines, or Grasshopper will freeze perhaps indefinitely for 200 lines with extreme settings, especially the CS (Cube Size) setting that can blow up into a huge number if your scale is big.
Cocoon gives lots of nearly flat split quad faces so I quadrangulated those for fun:
Or MeshMachine can refine the mesh to make it efficient:
Whereas the Cocoon Refine component will merely return an equally fine mesh with more equilateral triangles but no serious remeshing to rid so many tiny triangles where they are not needed? Actually, it does seem to remesh also:
David said he used some of Daniel's MeshMachine code in there.…
ace Syntax." eCAADe 2013 18 (2013): 357.
http://www.sss9.or.kr/paperpdf/mmd/sss9_2013_ref048_p.pdf
The measure Entropy is newer. I hereby explain it (from my PhD dissertation):
Entropy values, as described in (Hillier & Hanson, The Social Logic of Space, 1984) and specified in (Turner A. , “Depthmap: A Program to Perform Visibility Graph Analysis, 2007), intuitively describe the difficulty of getting to other spaces from a certain space. In other words, the higher the entropy value, the more difficult it is to reach other spaces from that space and vice-versa. We compute the spatial entropy of the node as using the point depth set:
(11)
“The term is the maximum depth from vertex and is the frequency of point depth *d* from the vertex” (ibid). Technically, we compute it using the function below, which itself uses some outputs and by-products from previous calculations:
Algorithm 4: Entropy Computation
Given the graph (adjacency lists), Depths as List of List of integer, DepthMap as Dictionary of integer
Initialize Entropies as List(double)
For node as integer in range [0, |V|)
integer How_Many_of_D=0
double S_node=0
For depth as integer in range [1, Depths[node].Max()]
How_Many_of_D=DepthMap.Branch[(node,depth)].Count
double frequency= How_Many_of_D/|V|
S_node = S_node - frequency * Math.Log(frequency, 2)
Next
Entropies [node] = S_node
Next
…
starting as soon as possible.
We're offering challenging projects, insights and contact to leading industry companies, project responsibilities according to abilities and initiative, great work environment and laid-back atmosphere, room to play and evolve,...
Our ideal candidate:
- is passionate about construction, engineering and (computational) design
- is proficient in Rhino / Grasshopper / (GH-)Python
- knows his ways around the Adobe Suite and MS Office
- has a current work permit for Germany
- is a German speaker (other native speakers also welcome, with excellent English skills)
- has an architectural background (Student / BA / MA /...), ideally with work experience
- is interested / has experience in digital manufacturing and prototyping
- will be able to join us shortly
We're looking forward to your applications / inquiries / CVs to: mpelzer@fat-lab.de
View our past projects here: www.fat-lab.com
(Current projects, unfortunately, are non-disclosed)
…
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
y case. Here's the thing. There is this subject at my university where we are assigned a famous building and we need to recreate it in Rhino. We're given bonus points if we manage to code some interesting part of it in Grasshopper. So far so good, I'm doing pretty well with Rhino and by far I am happy with the results I've achieved with modelling the given building. Harbin Opera House by MAD is the building I'm trying to model. There is one particular surface:I've built this surface in Rhino and now I'm trying to map pyramids on it. Not only have the pyramids to be different in height, but their height has to be dependent on the curvature of the surface. I'm getting some results but it seems to be exactly the opposite of what I need. I want to have higher/spikier pyramids where my curvature analysis shows red/blue and lower/slopier pyramids where the analysis shows green colour.At the moment I'm not really sure how the code I have works, but it seems that the height of the pyramids is dependent on a distance from a point in space to the projection of the cap-point of a pyramid.Here're my Rhino and Grasshopper files:surface1.3dm
surface1.ghI'd be grateful if someone of you guys could handle my problem. I've got one more issue with this surface, but once I get a solution to the first 1 will let know what the second one is.Thanks in advance and keep well!…