he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
e some questions.
I want to loop with a foreach loop trough a list of points do i have to make a list before or is it possible to use them coming in from a noed i set the access to list?
Also i dont understand why no plane is created. How do i need to feed the points in?
And why is c# expecting open parens in line 88 and 86?
Hope its not to much at once, probably i should try a few less steps to get the problems solved one by one, just hoped it would be easier and sometimes just a parentesis is missing or some format stuff, so maybe it is not so much i really cant say.
If anybody has the time and feels he wants to help it would be nice on the other hand i understand cause of the amount of chaotic questions.
Regards!…
size component supported only ground PV panels and angled roof PV panels.
Download the newest PV SWH system size component from here (Click on "View Raw" to download it. Then move the downloaded .ghuser file to File->Special Folders->User Objects Folder, an confirm to overwrite it with previously located one).
Just a few opinions on the project you are currently working on:This kind of fixed, non-transparent (overhang) PV panels attached to a building facade are vert convenient for locations with higher latitudes.The reason for this is because they (fixed overhang PV panels) are dimensioned according to the sun position at summer solstice. Elevation angles on summer solstice at higher latitude locations are lower, than those of lower latitude locations.Due to Incheon's low latitude (37), you will get rather short length of the PV panels* : less than 10 centimeters (0.097 meters in the attached .gh file below). As you have mentioned, Galapagos needs to be used too.I will just mention some of the good and bad ways in which the upper issue could be somewhat avoided:1) Increasing the vertical distance between PV panels (PV panels appear above every second window).2) Increase the tilt angle. This will increase the length of PV panels also, but will decrease the final annual AC energy output.An example of this solution has been applied at FKI building in Seoul (latitude: 37N):I already did some tests (with tilt angles: 40, 45, 55) and this does not seem like a good solution, though.3) Shrinking the "sun window" by using the minimalSpacingPeriod_ input. In Photovoltaics, a planner is suppose to make the 9h to 15h part of the sun window free of any obstructions. If you try to decrease the "sun window" to 10 to 14h, the length of your PV panels will increase. You can try to experiment a little bit with this (set your minimalSpacingPeriod_ to 21th of June 10 to 14hours). In general, shrinking the sun window on summer solstice is not a good principle during planning.4) Using tracking PV panels, not fixed ones. But Ladybug Photovoltaics components do not support this kind of PV systems. They only support fixed ones.I would personally go with the first option. You can also experiment with the second and third one.Comment back if you have any other questions.-----------------------* By "length of the PV panels" I mean the: tiltedArrayHeight_ input of the PV SWH system size component.…
n make it possible to Motivation generate
a variety of interesting objects, from abstract fractals to plant-like
branching structures, their modeling power is quite limited. A major
problem can be traced to the reduction of all lines to integer multiples
of the unit segment. As a result, even such a simple figure as an
isosceles right-angled triangle cannot be traced exactly, since the ratio
of its hypotenuse length to the length of a side is expressed by the irrational
number √2. Rational approximation of line length provides only
a limited solution, because the unit step must be the smallest common
1
1
√2
denominator of all line lengths in the modeled structure. Consequently,
the representation of a simple plant module, such as an internode, may
require a large number of symbols. The same argument applies to angles.
Problems become even more pronounced while simulating changes
to the modeled structure over time, since some growth functions cannot
be expressed conveniently using L-systems. Generally, it is difficult
1.10. Parametric L-systems 41
to capture continuous phenomena, since the obvious technique of discretizing
continuous values may require a large number of quantization
levels, yielding L-systems with hundreds of symbols and productions.
Consequently, model specification becomes difficult, and the mathematical
beauty of L-systems is lost.
In order to solve similar problems, Lindenmayer proposed that numerical
parameters be associated with L-system symbols [83]. He illustrated
this idea by referring to the continuous development of branching
structures and diffusion of chemical compounds in a nonbranching filament
of Anabaena catenula.
The following is an example of its application:
starting string: A
p1: A F(1)[+A][-A]
P2: F(s) F(s*R)
which I think is basically trying to say
F(s) = move forwar a step of length s > 0.
Thanks again,
Mateo…
see in my bottom post image there is only one isocurve showing in U and V.
In Grasshopper there's no surface rebuild? Well, the same old Grasshopper Patch command will let you specify spans I guess, to make a surface from a planar curve, but it won't work for things with holes since they will just fill in!
You can recreate a surface painfully by untrimming, adding many UV points, rebuilding from those points, then retrimming with the original surface info, but the retrimming simply fails.
If you make a planar surface from a curve in Rhino, you end up with utterly no point editability:
No wonder my CreatePatch tests were a failure. The starting surface could not be distorted except in the extreme case of moving four corner points!
I have no idea how to successfully rebuild a surface akin to the Rhino rebuild command. It's great to be able to prototype in Grasshopper, but with Python I can rebuild easily ( http://4.rhino3d.com/5/rhinocommon/?topic=html/M_Rhino_Geometry_Surface_Rebuild.htm ;), so I guess I should start a collection, like peter, of little script components for prototyping with.…
Added by Nik Willmore at 6:18am on February 26, 2016
rs interface og dykker derefter ned i mere komplekse parametriske modeller. Vi vil desuden arbejde med forskellige funktioner, der hjælper med til at gøre modeller mere responsive og interaktive.
Efter kurset vil du have/kende til:
Basale inputs og parametre, punkter og vektorer, og små geometriske eksempler
En forståelse for Grasshoppers interface og teorien bag den visuelle programmering
Kendskab til og forståelse af de væsentligste komponenttyper i Grasshopper
Matematiske principper, der giver mulighed for sortering gennem sandt/falsk og mindre-end/større-end udsagn
Dataflow: midlertidige og permanente data
Forene og styre data-input, samt en dybere forståelse af Grasshoppers datastyring.
Styring af lange data-lister og data-træer i Grasshopper
Eksempler på parametrisk geometri, som feks. attractorpoints
Brugen af Grasshopper som et panel værktøj, der giver mulighed for at beklæde overflader med paneler baseret på underindelinger, gradienter og attractor points
forberedelse af egne definitioner, med fortsat fokus på projektets responsibilitet.
…
on this, but to my understanding, the Δt_pr used is the same - the equations used to calculate are not. Take a look at this (from EN 7730 as well):
If I can make some wishes too; it would be cool, if you included the last local comfort metrics from EN7730 in LB/HB as well. Besides the local asymmetry there are: an equation for warm/cold floors, stratification and draught. I know, that you will need preform a CFD simulation to properly calculate stratification and draught, but the comfort equations are really simple and seeing that you have(might have) a CFD tool under way it could be useful. Anyways I think it would possible to import external generated CFD data to grasshopper.
The pictures in my previous post are from a paper called: "A simplified calculation method for checking the indoor thermal climate" by B.W. Olesen, it can be found in ASHRAE 1983, vol. 25, issue 5. I don't know if there have been any updates to it since '83.
Looking forward for the new components, and if there is anything I can help with please let me know.
/Christian
…
te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …
p; 3D Urban ModelingOn the topography subject I get the next message: "One or more boundaries may be outside the bounds of the topo dataset" I'm not sure if it's the .IMG file I'm loading since I found so many IMG files nearing my polyline area (Miami Lat:26 Lon:-81 aprox.) or maybe my polygon doesn't match the topo area? I have no idea why it isn't working :(On the Shapefile subject, haven't been able to find a Building Height SHP File, so far have downloaded around 8 SHP files which only contain Polylines, my solution is to meanwhile randomize Z heights, but of course this data is not "technically" correct.P.S.: I've already tried all example links and also the ones posted by you and Benjamin in this video.Been strugling last few days, hope you can help me, thanks in advance!!…