ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
ort and export from the images below and also from the HELP file of DB in attachments (Page 71: Importing Geometric Data; Page 78-80: Import 3 - D CAD Data). In their HELP file, they mention about "import geometric data".
However, regarding the input of schedules, loads, constructions and etc., DB normally uses "Component " and "Template" (Page 29: Templates And Components; Page 591: Templates; Page 533: Components). "Templates" are databases of typical generic data, including Activity templates, Construction templates, Glazing templates, Facade templates, HVAC templates, Location Templates, and etc. "Component " are databases of individual data items (e.g. a construction type, material, window pane).
Both "Component " and "Template" are allowed to be imported and exported by using "Import / Export library data" command (.ddf format - DB Database File; Page 734: Import Components/Templates, Export Components/Templates). DB also allows us to build up our own libraries of templates and components (Page 731: Library Management; Page 733: Template Library Management).
In order to import both geometric information and other information related to schedules, loads, constructions and etc. from GH to BD, we supposed the following two ways:
1. GH(HB+GB) --> gbXML (both geometric and "Component " and "Template" information) --> DB
This is the way we most prefer. We did see information related to schedules, loads, constructions encoded in the gbXML file generated by GB, but still do not know the reason why DB did not take this information (I also mentioned this in Q6 within the gh file). We assume this might because the gbXML file we create encodes the schedules based on a different template / schema than the one DB expects. We also post this question to the DB forum for help.
(http://www.designbuilder.co.uk/component/option,com_forum/Itemid,25/page,viewtopic/p,13755/#13755)
2. GH(HB+GB) --> gbXML (geometric information only) + .ddf ("Component " and "Template" information only) --> DB
If the first way doesn't work and DB only takes geometric information from the gbXML, then we might think of the other way - generating the .ddf files from GH(HB+GB) to pass the schedule, load and construction information to DB.
I was wondering if it is feasible for HB and GB to have this function? And what is your suggestion to achieve this?
In addition, we notice that DB can export XML files (not gbXML), so we are trying to figure out if DB also accepts / reads the XML file. If so, we might be able to convert the gbXML (with both geometric and schedule information) to XML. What do you think about that?
Thank you again for all your help!
Best,
Ding
DB import
DB export
Template libraries
Component libraries
…
te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
try now to integrate Geco in an interdisciplinary architectural engineering studio: hoping we can show you some nice applications of your tool, I'll keep you update and sending now details by e-mail. Here the file (very welcome to be shared). It most probably contais trivial errors by me, thanks for helping and giving some tip! Gr. Michela
FILE:
Ok, right, I see the outputs update correctly. Origin of problems must be in some different mistake I do:
- Incident radiation: I am not sure I understand what is going on: why I get so many 'not a number' ? (The Galapagos report is full of NaNs).
Bio-Diversity: 0.887 Genome[0], Fitness=NaN, Genes [89% · 44%] { Record: Too many fitness values supplied } ...
Genome[7], Fitness=NaN, Genes [74%] { Record: No fitness value was supplied } ....
Genome[9], Fitness=NaN, Genes [37% · 11%] { Record: Genome was mutated to avoid collision Record: Too many fitness values supplied }
- Daylight calculations: the geometry accumulates withouth deleting the previous models. As a consequance, results almost do not change after few varations (so, outputs get updated but do not vary). In current daylight definition: the first object being imported is the one where the grid has to fit; its setting makes it cancelling all the other objects during import. All the others, do not delete anything when imported. When running loops (manual or GA) that vary parameters, the entire geometry do not get cancelled - so I guess the loop does not pass back by the cancelling step, but imports only the geometry which has been varied by the parameters using the setting of that import component only? I will then try again by changing the order of the operations, but if you have specfic tips, let me know.
THANKS!
…
next level.
This Parametric Design course will provide the participants with the necessary knowledge and ability to use Grasshopper, a free visual programming plugin in Rhinoceros; you will be guided through a series of hands-on exercises that highlight NURBS modeling and its concepts. We will introduce Grasshopper as a graphical algorithm editor tightly integrated with Rhino’s 3D modeling tools. You will also learn how Rhino is used to render models for visualization, translate 3D models for prototyping, and export 3D models into 2D CAD or graphics programs.
English is the course main language.
Location: Düsseldorf city center
Registration and buying Tickets
www.digitalparametrics.eventbrite.de
Course Calendar:
4 Days 6 hours each
Total duration 24h
2 weekends
Date:
Sat. 17 - Sun. 18 June
Sat. 24 - Sun. 25 June
10:00 - 17:00
Getting Started in Rhino. 2 days (17 - 18 June)
Getting Started in Grasshopper. 2 days (24 - 25 June)
-----------------------------------------------------------------------
Participants will be given a certificate of participation at the end of the course.
-----------------------------------------------------------------------
Course fees:
Professionals: 600€ (excl. MwSt.) Students: 500€ (excl. MwSt.) Students need to provide: Copy of current student ID or proof of student enrollment at University/School.
Group discounts:
Group of 3 professionals: 3x500 = 1500€ (excl. MwSt.)
Group of 3 Students: 3x400 = 1200€ (excl. MwSt.)
Participants are kindly asked to bring their own laptops and have pre-installed Rhino + Grasshopper.
Useful Resources:
Rhinoceros Installation (90 days full version trial available): http://www.rhino3d.com/download
Rhinoceros for Mac (includes Grasshopper) http://www.rhino3d.com/download/rhino-for-mac/5/wip
Grasshopper Free Installation: http://www.grasshopper3d.com/page/download-1
Grasshopper Free Plugins: http://www.food4rhino.com/app/lunchbox http://www.giuliopiacentino.com/weaverbird
Main Tutor:
Rihan
M.A. Dipl.Ing. Architect
Architect at RKW Architektur + Düsseldorf
For any questions about the course, please email: info@immersive-studio.com…
ll geometry.
The difference with programs like Inventor is that they are made for production, regardless of the fabrication method. I won't go into detail about that, and instead focus on the modeling process.
In this little model, the starting point actually is a bit obvious, the foundation.
The only contents in the 3dm file are 27 lines. These indicate the location of each footing, and the direction of the tilt of each column. Everything else is defined in GH with the use of numbers as input parameters.
Needless to say, instead of those lines you could obviously generate lines and control the number of columns and panels, hence establish their layout, with any algorithmic or non-algorithmic criteria you please. That marks a major difference between GH and Inventor.
You can generate geometry with Inventor via scripting/customization (beyond iLogic), with transient graphics for visual feedback similar to GH's red-default previews. However Inventor's modeling functions are not set to input and output data trees. I won't go into detail on that, but suffice to say that the data tree associativity of GH was for me the first major difference I noticed. I've used other apps with node diagram interfaces like digital fusion for non-linear video editing since the late 90's, so the canvas did not call my attention when I first started using GH.
Anyways, here's a screen capture of the foundational lines:
In the first group of components, the centerlines of the rear columns are modeled:
And the locations in elevation for connection points are set. Those elevations were just numbers I copied from Excel, but you can obviously control that any way you please. I was just trying to model this quickly.
The same was done for the rear columns:
The above, believe it or not, took me the first 5 hours to get.
Here's a screen capture of what the model and definition looked like after 4 hours, not much:
If you're interested, next post I can get into the sketching part you mentioned, which is a bit cumbersome with GH, but not really.
I wouldn't say that using GH to do this little model was cumbersome, it just needed some thinking at the beginning. You do similar initial thinking when working with a feature-based modeler.…
Added by Santiago Diaz at 12:44am on February 24, 2011
unity in Ukraine, which is orientated to contemporary architecture.
The results of CANactions will be published in ACC magazine (link), on the web-sites of “Architectural club” (link), AB "ZOTOV&CO" (www.zotov.com.ua),
Theme
Theme of CANactions 2009 is emergent design techniques.
This theme could include following architectural branches as Digital design, sustainable architecture and other sectors, which by the participants’ opinions, could be EMERGENT.???
Any architectural projects made earlier of specially for the CANactions’09 are allowed for submission.
Presentation
All the projects will be submitted in two phases:
Phase 1 – selection of 10-15 participants of CANactions.
Project has to be sent by e-mail to: (__) in PDF (not less then 300 dpi, not more then 10 Mb).
Phase 2 –the CANactions participants prepare 15-20 min presentation of their projects (screen projector, microphone) and materials for the exhibition in House of Architect, Kyiv. The project has to be presented by author. -> exhibition is the first architecture biennale
Presentation requirements: file should be composed in PDF format on A0 sheets, placed horizontal (not more then 1 sheets). This file should contain sufficient amount of the presentation graphic material, including text explanation up to 300 words.
The raster images should have printing definition not less then 300 dpi. It’s recommended to avoid solid black fillings, because the projects will be printed on ink-jet printer.
The presentation requirements could be changed after phase 1 results.
The presentation materials should be made in Ukrainian (or Russian) and English. Verbal part can be presented in any language.
Tarek Naga, Naga Studio, Los Angeles / USA (I can contact him - he will do it for free)
Awards
DIA (Dessau Institute of Architecture), Germany gives a prize: certificate for the education for 1 (2) semesters of Master-program in DIA for students and young architects (up to 30 years) from Ukraine. The decision about the prize winners will be made by selection board.
Guests presentations
- Daniel da Rocha DIA /Germany/ (flights, accommodation?). Theme: (scripting???)
- Aleksandr Kalachev DIA /Riussian Federation/, Tudor Cosmatu DIA /Romania/, Irina Bogdan DIA /Romania/ - "Parametrically Defined Urban Patterns".
- Grygorii Zotov DIA /Ukraine/ - “The Multicultural Columbarium”.
- Armen Menendian /USA/ - "Blending Parametric Methods With Traditional Design:
"The Danish Pavilion at Shanghai EXPO 2010".
Exhibitions
1. Projects of 10 (15) CANactions participants
2. other projects: Zotov+Co
Bollinger+Grohmann - structural eng.
the very many
C-Space Pavillon / alvin huang
ala _ amanda levete studio
anOtherArchitect
student work, Charles Walker, AA Unit Pavillon
Event schedule
Phase 1: 01.07.2009 – start of the CANactions 2009 and beginning of projects submission.
16.08.2009 - dead-line of the project submission of phase 1.
Phase 2: 17.08.2009 – announcement of the CANactions 2009 participants.
30.08.2009 – dead-line of submission of the CANactions 2009 exhibition materials.
14-26.09.2009 – exhibition of the CANactions 2009 projects in House of Architect, Kyiv.
25-26.09.2009 – CANactions 2009.
26.09.2009 - finnissage / announcement of competition winners for DIA study
Contacts: canactions2009@gmail.com…
Added by Grisha Zotov at 6:32am on August 10, 2009
akes the linear regression of the Schroeder integral over 30 dB worth of decay. Whether it is T-15 or T-30, they all seek to estimate the RT, which is always always the time it takes for sound to decay 60 decibels.
The website has benchmarks, for your reference. You can find them under the 'Pachyderm' drop down menu, under 'Benchmarks'.
Your model may well require millions of rays to be accurate. It sounds like a very large space. I'm sorry if that is an unpleasant answer. Sometimes it does help to have a computer with more cores to help with this. I have gotten up to 90% processor usage on a 12 core machine before.
Arthur…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…
se (like in nature). the length of the sticks shall be controlled by the brightnessvalues of a picture. so the bend have to be controlled, too.
now we have several problems:
1. how can i map a hexgrid on a curved surface?
2. how can i adapt the grid to the dimensions of the surface (no overlap, no gaps to the bound)?
3. important
: to create the curved sticks, we use points on a line and we move some of them and then we want to connect the right points via interpolated curve to create each curved stick. now the problem is that the points have to been filtered in the right way. we know that we have to filter each list of points to the index values of the points. the number of index values is the number of hexgrid rows, so there are a lot and we can't use a list item for each one. it could be hundreds.
is there any opportunity to sort a list after the index values (first every index=0, then index=1, ...n)?
or is there any component which does a group of operations for n-times (n is the flexible number of index values) ?
4. how can i control the length and bend of the sticks via the brightnessvalues of a picture?
please help us. thanks.
german version:
In einem hexagonalen Raster soll sich senkrecht zu Oberfläche ein Stab im Mittelpunkt jedes Sechsecks befinden. Dieser soll sich ab einem gewissen (festgelegten) Punkt Richtung Boden biegen. Zusätzlich wird die Länge des Stabes zum Beispiel durch die Information eines Bildes gesteuert, so dass auch die Biegung, je nach Länge, geregelt werden muss.
Wir haben ein Hexagonales Grid (HexGrid) erzeugt und in jeden Mittelpunkt eine Linie senkrecht zum Grid erzeugt, aus der wir uns Punkte mit CurvePoint ausgeben lassen. Der letzte ist verschoben, um eine Biegung zu simulieren. Um die Punkte zu einer interpolierten Kurve zu verbinden, müssen sie nach dem Index sortiert werden. Gibt es eine andere Möglichkeit, als jeden einzelnen Indexwert über ein ListItem herauszufiltern (Da die Rasterung flexibel einstellbar sein soll, entstehen n Indexwerte)? Oder kann man eine Liste nach den Indexwerten, also nicht nach den Punkten, sortieren?
Und wie kann man über Bildhelligkeitswerte die Länge der Stäbe und damit auch die Biegung steuern (ein kurzer Stab biegt sich weniger als ein langer Stab)?
Gibt es die Möglichkeit ein hexagonales Raster auf eine gekrümmte Fläche zu mappen?
Und wie passt man ein solches Raster (HexGrid) in eine Fläche mit definierten Maßen ein, ohne dass das Raster an den Rändern übersteht oder die Fläche nicht vollkommen ausfüllt?
danke.…
Added by doro hamann at 7:34am on December 20, 2011