se (like in nature). the length of the sticks shall be controlled by the brightnessvalues of a picture. so the bend have to be controlled, too.
now we have several problems:
1. how can i map a hexgrid on a curved surface?
2. how can i adapt the grid to the dimensions of the surface (no overlap, no gaps to the bound)?
3. important
: to create the curved sticks, we use points on a line and we move some of them and then we want to connect the right points via interpolated curve to create each curved stick. now the problem is that the points have to been filtered in the right way. we know that we have to filter each list of points to the index values of the points. the number of index values is the number of hexgrid rows, so there are a lot and we can't use a list item for each one. it could be hundreds.
is there any opportunity to sort a list after the index values (first every index=0, then index=1, ...n)?
or is there any component which does a group of operations for n-times (n is the flexible number of index values) ?
4. how can i control the length and bend of the sticks via the brightnessvalues of a picture?
please help us. thanks.
german version:
In einem hexagonalen Raster soll sich senkrecht zu Oberfläche ein Stab im Mittelpunkt jedes Sechsecks befinden. Dieser soll sich ab einem gewissen (festgelegten) Punkt Richtung Boden biegen. Zusätzlich wird die Länge des Stabes zum Beispiel durch die Information eines Bildes gesteuert, so dass auch die Biegung, je nach Länge, geregelt werden muss.
Wir haben ein Hexagonales Grid (HexGrid) erzeugt und in jeden Mittelpunkt eine Linie senkrecht zum Grid erzeugt, aus der wir uns Punkte mit CurvePoint ausgeben lassen. Der letzte ist verschoben, um eine Biegung zu simulieren. Um die Punkte zu einer interpolierten Kurve zu verbinden, müssen sie nach dem Index sortiert werden. Gibt es eine andere Möglichkeit, als jeden einzelnen Indexwert über ein ListItem herauszufiltern (Da die Rasterung flexibel einstellbar sein soll, entstehen n Indexwerte)? Oder kann man eine Liste nach den Indexwerten, also nicht nach den Punkten, sortieren?
Und wie kann man über Bildhelligkeitswerte die Länge der Stäbe und damit auch die Biegung steuern (ein kurzer Stab biegt sich weniger als ein langer Stab)?
Gibt es die Möglichkeit ein hexagonales Raster auf eine gekrümmte Fläche zu mappen?
Und wie passt man ein solches Raster (HexGrid) in eine Fläche mit definierten Maßen ein, ohne dass das Raster an den Rändern übersteht oder die Fläche nicht vollkommen ausfüllt?
danke.…
Added by doro hamann at 7:34am on December 20, 2011
es has guided me in a - what I once thought - specific path within architecture, but recent discoveries (like the Grasshopper-community etc.) have learned me that the field of digital and parametric architecture is so-to-speak alive and kicking. This is also the main subject I would like to write my thesis about. It is however mainly the subject and defining its boundaries – what do I really want to explore and research? – which is the most difficult factor at this time.
A concrete idea is non-existant, and my current visions will probably be redirected when I have a first meeting with the promotors in February. Moreover there is the knowledge that it is impossible to make a thesis at the institute in Antwerp on no matter what subject in the world of digital architecture. Understandably too, it’s a small world and does not always result in realised projects, but in impressive imagery. At this moment however, I am thinking of two possible research fields to focus on.
In a first option the focus might lie on how digital design tools can be used to bring a certain aspect of interactivity to building facades. Such interactivity can occur both in the design phase and throughout the use of the building. The first scenario, in which the interactivity occurs when designing, I would focus on how the designer can shape a building’s outer perspective in function of environmental parameters: obstacles, elements that block sunlight from entering the building, visually important landmarks, etc. It should be noted however that focus will mostly lie on the design element, and less on the energy-efficiency and sustainability. Tools that will be researched would include Grasshopper, Rhino Scripting, Processing and ParaCloud.
A second possible approach could be categorized under both Swarm Intelligence and Generative Design and might study how the aforementioned digital techniques might be implemented in the new urbanism. We notably see more (innovative) interventions in which the design and planning is heavily influenced by movement patterns and morphogenetic parameters and functions. Based on the outcome of these scripted techniques, designers tend to work towards a proposal which answers a certain urbanistic issue.
All additional insights, guidelines, tips, comments are more than welcome in order to help me define the scope of my thesis subject. I must admit I am pretty new to this digital design world (it is not actively promoted at my home university, but it is promoted at the university where I am studying for one year now) and thus have limited experience at the time of writing.
Please also feel free to check out the blog post concerning this topic, which is a little more elaborate: http://nielswouters.be/thesis-digital-design-english/
Thanks for all your help!
…
what they really mean by that, as in what buttons to push, so I assume it's a Windows Path entry?
2.) Modify PATH
Add the install location on the path, this is usually: C:\Program File\IronPython 2.7
But on 64-bit Windows systems it is: C:\Program File (x86)\IronPython 2.7
As a check, open a Windows command prompt and go to a directory (which is not the above) and type:
> ipy -V PythonContext 2.7.0.40 on .NET 4.0.30319.225
Tutorial on setting a Windows environmental variable (path):
http://www.computerhope.com/issues/ch000549.htm
But this fails to point out that path contains many entries already separated by semicolons so if I merely add a new variable called "path" it's likely that I will destroy existing program function. There's no info on how to just tack on another entry, and the Windows 7 edit box doesn't even show the whole collection, but one item (!), so I copied the existing path into a text editor to see the whole collection successfully and added the C:\Program Files (x86)\IronPython 2.7 entry after an added semicolon, correcting for an Enthought page typo of no 's' on the end of "Program Files". I also checked the others and many pointed to old missing directories so I deleted those entries.
...and the test fails and "ipy" is not recognized as a command, even though the path now shows up using "path" in the Windows CMD window, that is if I copy all by right clicking and pasting the stuff into a text editor to really view it all. I can run it from the source directory just fine.
The rabbit hole was indeed deep. Using the Task Manager (control-alt-delete) to kill Explorer and then Run in the menu to restart "Explorer," along with restarting the Windows CMD window however, worked. I can now invoke Iron Python ("ipy") via command line from any directory. For the "path" I edited path in the System Variables and not the User Variables. No, you don't have to type that whole crazy line above just to test the path variable, just "ipy" (and control-Z to quite IronPython) in the CMD window invoked by typing "cmd" into the Start menu search box.
From the CMD line this step did work fine:
3.) ironpkg
Bootstrap ironpkg, which is a package install manager for binary (egg based) Python packages. Download ironpkg-1.0.0.py and type:
> ipy ironpkg-1.0.0.py --install
Now the ironpkg command should be available:
> ironpkg -h(some useful help text is displayed here)
But of course Step 4 fails, giving pages of what seem to be error messages;
C:\Users\Nik>ironpkg scipy
Traceback (most recent call last):
File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.
py", line 92, in write_data_from_url
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 126, in urlo
pen
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 397, in open
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 509, in http
_response
...
Why can't I just download Numpy as a normal file and thus also have it easy for other users to install it when they use my scripts? This is just crazy and lazy. The Enthought developer has turned this into a computer game, with a missing registration link and then the last step spits out errors with utterly no information on how to fix it manually.
This Step 4 error is covered here:
http://discourse.mcneel.com/t/trying-to-import-numpy-in-rhino-python-but-im-getting-this-error-cannot-import-multiarray-from-numpy-core/12912/16…
Added by Nik Willmore at 2:36pm on October 11, 2015
y in English. ○Presenter
Robert (Bob) McNeel (McNeel & Associates founder) Robert (Bob) McNeel is the founder and president of Robert McNeel & Associates (RMA). Founded in 1978, RMA originally focused on developing accounting software for accounting, architecture, engineering, and other personal services firms. Within a few years, RMA expanded its services to include selling and supporting microprocessor-based engineering and design software including AutoCAD. By 1985, the main focus of the business had shifted to AutoCAD sales, service, training, and software development. Bob McNeel grew up in the mountains of southern Washington State on a subsistence dairy farm. To pay for college, he worked in construction as a carpenter, welder, and cement finisher. Bob has a BA in Accounting from Washington State University. Prior to founding McNeel & Associates, he was a practicing Certified Public Accountant and the comptroller for a large construction company in Spokane. Andrés González (Rhino Fablab director) Andrés is a software trainer and developer since the 1980s. He has developed applications for diverse design markets as well as training materials for different CAD and Design software including the community of training materialswww.Rhino3D.TV Andrés has been working with the Rhino Team since the very early stages. He is now the head of the McNeel Southeast US & Latin American Division. He is the worldwide director of the digital fabrication community called RhinoFabLabwww.RhinoFabLab.com as well as the Generative Jewelry & Fashion Design community GJD3D www.GJD3d.com and Generative Furniture Design community GFD3D www.GFD3d.com 1981 -1985 University of North Carolina at Charlotte N.C. - EE.UU. B.S., Bachelor of Science in Engineering
…
Added by Yusuke Oono at 9:28pm on October 16, 2013
ld be the best UI.
I think difference is made by 'Slider = 10' vs 'Slider = 10.000' more than by simple input/component initialization so, why to stop when it could be even more powerful?
Slider = 0 To 5 --- Slider in [0, 5]
Slider = {3; 0 To 5}
Slider = {3;0;5}
Slider = 3;0;5
Slider = 3 0:5
Slider = 3,0,5
Slider = 3 0 5 --- Value and range (min max)
3 0.0 5 --- 3.0 0.0 5.0
3 0 5.0 --- 3.0 0.0 5.0
3.0 0 5 --- 3.0 0.0 5.0
-1 0 5 --- 0 0 5 (-1 -1 5)
6 0 5 --- 5 0 5 (6 0 6)
Slider = 0:2:6 --- Even numbers: 0, 2, 4, 6.
Slider = 1:2:7 --- Odd numbers: 1, 3, 5, 7.
0:2:5 --- 0:2:4 (or 0:2:6)
3:2:8 --- 3:2:7 (or 3:2:9)
3 1:2:7 --- 1 3 5 7 (value 3)
Bang! = 7 --- 7 outputs
Merge = 5 --- 5 inputs
What's your opinion about Bang! = 7? As it's setting number of inputs, should it use different format? Bang! 7? Bang! (7)? Bang! i7?
+ * - / \ % ^ & | ! = > --- Addition, Multiplication, Subtraction, Division, Integer Division, Modulus, Power, AND, OR, NOT, Larger than, &c.
= could be a problem.
\ Integer division or Set difference?
! could be NOT but also Factorial.
| could mean intersection.
& could mean concatenate.
1+ --- Addition: input A = 1
2* --- Multiplication: input A = 2
+{0,1,1} --- Addition: input B = {0,1,1}
0-, 1/, 2^, 10^, e^ have their own components
Flatten = {7} or Flatten = 7 --- Input P = {7} (off-topic: Why can’t P be a list?)
Pt = {1, 2, 3} --- Point XYZ, X = 1, Y = 2, Z = 3.
Swatch = 129,239,231 (102)
Swatch = 129 139 231 102
F2 = "x^2+y"
"List Length" and "List Insert" don't work properly: "Value List" is choosen. Why? What's the reason to this choice? Well, I'd like to know how the whole thing (search by keywords) works, David.
Name and nickname can be now used as keywords. "Larger" works for ">" but "greater" doesn't. Could it be improved? Could synonyms be used? Could a short description even be used (I know this could be a bit weird)?
more than --- >
more or less --- Similarity
more less --- Similarity
red green --- Sets.List components should be showed
lightning --- Split Tree
What about use Curve.Analysis or Math.Boolean to display those Tab.Panel components? Param, Math, Sets, Vector? Primitive, Special, Util? Tab, Panel, and Tab.Panel as keywords.
At the moment that I write this, I check that ignoring accents in keywords has almost been included (0.8.0009): p`anel, pañel, pánel --- panel (almost)
Shouldn’t 'Dom2' work for Dom²?
What about nested search? You type some keywords (say 'Params' or 'Params.Geometry', or 'red green', or 'lst') and then you make a fine-tunning search over previous results/keywords. Tab.Panel and/or nested geometry could be useful when search by plug-in is desired or when you want to search among .ghuser components (first 'ghuser' or 'Extra.MyPlugIn' or 'lst' keyword and then fine-tunning, specific, search).
Is 'list length' performing this nested search right now ('lst' > 'length')? Anyway, I am thinking about UI (graphical) changes; successive searches.
As I said, description (and even words from the help info) could be used to search. What about "some kind of tags"? I mean that if 'list l' to finally choose List Length has been used for a while, that could be learned. Eventually, an XML file could store these tags, so you could even edit them. That could implement description, name, nickname, help info, Tab.Panel, .ghuser, synonyms (lots of them), tags/shortcuts or wathever.
How could flatten/graft/reverse be used? Initialize graft+Simplify or graft+Bang! could be really useful.
What about expressions? I don't how could it be done properly: would Slider = x^2 (expression) work? I mean, aren't expressions parsed when initializing?
Is Panel somehow doing this? 'panel = wathever' always suppose that wathever is a string, so you can't use 'panel = <pi>'. Sets.Strings components also do this.
I've been about to write several paragraphs about height/width (resizable components: Panel, Graph Mapper, Slider, &c.), input/output names (Scripts, F components; or any component with editable input/output names), orientation (Scribble), type hint and access option, nickname, &c. but, to sum up: being able to set any property when initializing would be really useful. I'd like to know the best choice of syntax but I'm sure that, David, you're closer to the answer. What do you think about this?
Slider: 3 0 5 "MySlider" "Slider^2"
Panel: "This is the content" "This is the title"
VB: "N" List Integer 7 "r" Item Double
Addition: A 1 B 2
I guess that any unified syntax would be elegant and useful, but additional ad hoc syntax (per component) could be even better (cleaner).
What about use lists of values? I'm not sure about format: panel = ("Hello", "Bonjour", "Hola")? If any valid format/syntax is found, maybe more sophisticated fetaures could be achieved: panel = {0;0} ("A", "B", "C") {0;1} ("1", "2", "3") How would you like this to be implemented?
There is a much simpler and interesting feature that would be useful, in my opinion: being able to initialize more than one component. I mean say 7xSlider = 10.0 and get 7 sliders and I also mean multiline (multi-component) initialization: Ctrl+Intro when you want to start a new line and Intro (or even some Accept/Cancel buttons when you activate multiline mode) to initialize (every line/component), for example. I mean:
3 x Slider = 1
Panel
Mass addition
Panel
And the whole bunch of components that were in mind (pre-thinked definition) is initialized. It speeds up the workflow, making more dynamic to add components that are only available via the drop-down panels.
Should this multiplier be something like a text box adjacent to search field more than '7x'?
These are some of my thoughts about intitializing. Please let me know your opinion :]
…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the
ng is deciding how and where to store your data. If you're writing textual code using any one of a huge number of programming languages there are a lot of different options, each with its own benefits and drawbacks. Sometimes you just need to store a single data point. At other times you may need a list of exactly one hundred data points. At other times still circumstances may demand a list of a variable number of data points.
In programming jargon, lists and arrays are typically used to store an ordered collection of data points, where each item is directly accessible. Bags and hash sets are examples of unordered data storage. These storage mechanisms do not have a concept of which data comes first and which next, but they are much better at searching the data set for specific values. Stacks and queues are ordered data structures where only the youngest or oldest data points are accessible respectively. These are popular structures for code designed to create and execute schedules. Linked lists are chains of consecutive data points, where each point knows only about its direct neighbours. As a result, it's a lot of work to find the one-millionth point in a linked list, but it's incredibly efficient to insert or remove points from the middle of the chain. Dictionaries store data in the form of key-value pairs, allowing one to index complicated data points using simple lookup codes.
The above is a just a small sampling of popular data storage mechanisms, there are many, many others. From multidimensional arrays to SQL databases. From readonly collections to concurrent k-dTrees. It takes a fair amount of knowledge and practice to be able to navigate this bewildering sea of options and pick the best suited storage mechanism for any particular problem. We did not wish to confront our users with this plethora of programmatic principles, and instead decided to offer only a single data storage mechanism.*
Data storage in Grasshopper
In order to see what mechanism would be optimal for Grasshopper, it is necessary to first list the different possible ways in which components may wish to access and store data, and also how families of data points flow through a Grasshopper network, often acquiring more complexity over time.
A lot of components operate on individual values and also output individual values as results. This is the simplest category, let's call it 1:1 (pronounced as "one to one", indicating a mapping from single inputs to single outputs). Two examples of 1:1 components are Subtraction and Construct Point. Subtraction takes two arguments on the left (A and B), and outputs the difference (A-B) to the right. Even when the component is called upon to calculate the difference between two collections of 12 million values each, at any one time it only cares about three values; A, B and the difference between the two. Similarly, Construct Point takes three separate numbers as input arguments and combines them to form a single xyz point.
Another common category of components create lists of data from single input values. We'll refer to these components as 1:N. Range and Divide Curve are oft used examples in this category. Range takes a single numeric domain and a single integer, but it outputs a list of numbers that divide the domain into the specified number of steps. Similarly, Divide Curve requires a single curve and a division count, but it outputs several lists of data, where the length of each list is a function of the division count.
The opposite behaviour also occurs. Common N:1 components are Polyline and Loft, both of which consume a list of points and curves respectively, yet output only a single curve or surface.
Lastly (in the list category), N:N components are also available. A fair number of components operate on lists of data and also output lists of data. Sort and Reverse List are examples of N:N components you will almost certainly encounter when using Grasshopper. It is true that N:N components mostly fall into the data management category, in the sense that they are mostly employed to change the way data is stored, rather than to create entirely new data, but they are common and important nonetheless.
A rare few components are even more complex than 1:N, N:1, or N:N, in that they are not content to operate on or output single lists of data points. The Divide Surface and Square Grid components want to output not just lists of points, but several lists of points, each of which represents a single row or column in a grid. We can refer to these components as 1:N' or N':1 or N:N' or ... depending on how the inputs and outputs are defined.
The above listing of data mapping categories encapsulate all components that ship with Grasshopper, though they do not necessarily minister to all imaginable mappings. However in the spirit of getting on with the software it was decided that a data structure that could handle individual values, lists of values, and lists of lists of values would solve at least 99% of the then existing problems and was thus considered to be a 'good thing'.
Data storage as the outcome of a process
If the problems of 1:N' mappings only occurred in those few components to do with grids, it would probably not warrant support for lists-of-lists in the core data structure. However, 1:N' or N:N' mappings can be the result of the concatenation of two or more 1:N components. Consider the following case: A collection of three polysurfaces (a box, a capped cylinder, and a triangular prism) is imported from Rhino into Grasshopper. The shapes are all exploded into their separate faces, resulting in 6 faces for the box, 3 for the cylinder, and 5 for the prism. Across each face, a collection of isocurves is drawn, resembling a hatching. Ultimately, each isocurve is divided into equally spaced points.
This is not an unreasonably elaborate case, but it already shows how shockingly quickly layers of complexity are introduced into the data as it flows from the left to the right side of the network.
It's no good ending up with a single huge list containing all the points. The data structure we use must be detailed enough to allow us to select from it any logical subset. This means that the ultimate data structure must contain a record of all the mappings that were applied from start to finish. It must be possible to select all the points that are associated with the second polysurface, but not the first or third. It must also be possible to select all points that are associated with the first face of each polysurface, but not any subsequent faces. Or a selection which includes only the fourth point of each division and no others.
The only way such selection sets can be defined, is if the data structure contains a record of the "history" of each data point. I.e. for every point we must be able to figure out which original shape it came from (the cube, the cylinder or the prism), which of the exploded faces it is associated with, which isocurve on that face was involved and the index of the point within the curve division family.
A flexible mechanism for variable history records.
The storage constraints mentioned so far (to wit, the requirement of storing individual values, lists of values, and lists of lists of values), combined with the relational constraints (to wit, the ability to measure the relatedness of various lists within the entire collection) lead us to Data Trees. The data structure we chose is certainly not the only imaginable solution to this problem, and due to its terse notation can appear fairly obtuse to the untrained eye. However since data trees only employ non-negative integers to identify both lists and items within lists, the structure is very amenable to simple arithmetic operations, which makes the structure very pliable from an algorithmic point of view.
A data tree is an ordered collection of lists. Each list is associated with a path, which serves as the identifier of that list. This means that two lists in the same tree cannot have the same path. A path is a collection of one or more non-negative integers. Path notation employs curly brackets and semi-colons as separators. The simplest path contains only the number zero and is written as: {0}. More complicated paths containing more elements are written as: {2;4;6}. Just as a path identifies a list within the tree, an index identifies a data point within a list. An index is always a single, non-negative integer. Indices are written inside square brackets and appended to path notation, in order to fully identify a single piece of data within an entire data tree: {2,4,6}[10].
Since both path elements and indices are zero-based (we start counting at zero, not one), there is a slight disconnect between the ordinality and the cardinality of numbers within data trees. The first element equals index 0, the second element can be found at index 1, the third element maps to index 2, and so on and so forth. This means that the "Eleventh point of the seventh isocurve of the fifth face of the third polysurface" will be written as {2;4;6}[10]. The first path element corresponds with the oldest mapping that occurred within the file, and each subsequent element represents a more recent operation. In this sense the path elements can be likened to taxonomic identifiers. The species {Animalia;Mammalia;Hominidea;Homo} and {Animalia;Mammalia;Hominidea;Pan} are more closely related to each other than to {Animalia;Mammalia; Cervidea;Rangifer}** because they share more codes at the start of their classification. Similarly, the paths {2;4;4} and {2;4;6} are more closely related to each other than they are to {2;3;5}.
The messy reality of data trees.
Although you may agree with me that in theory the data tree approach is solid, you may still get frustrated at the rate at which data trees grow more complex. Often Grasshopper will choose to add additional elements to the paths in a tree where none in fact is needed, resulting in paths that all share a lot of zeroes in certain places. For example a data tree might contain the paths:
{0;0;0;0;0}
{0;0;0;0;1}
{0;0;0;0;2}
{0;0;0;0;3}
{0;0;1;0;0}
{0;0;1;0;1}
{0;0;1;0;2}
{0;0;1;0;3}
instead of the far more economical:
{0;0}
{0;1}
{0;2}
{0;3}
{1;0}
{1;1}
{1;2}
{1;3}
The reason all these zeroes are added is because we value consistency over economics. It doesn't matter whether a component actually outputs more than one list, if the component belongs to the 1:N, 1:N', or N:N' groups, it will always add an extra integer to all the paths, because some day in the future, when the inputs change, it may need that extra integer to keep its lists untangled. We feel it's bad behaviour for the topology of a data tree to be subject to the topical values in that tree. Any component which relies on a specific topology will no longer work when that topology changes, and that should happen as seldom as possible.
Conclusion
Although data trees can be difficult to work with and probably cause more confusion than any other part of Grasshopper, they seem to work well in the majority of cases and we haven't been able to come up with a better solution. That's not to say we never will, but data trees are here to stay for the foreseeable future.
* This is not something we hit on immediately. The very first versions of Grasshopper only allowed for the storage of a single data point per parameter, making operations like [Loft] or [Divide Curve] impossible. Later versions allowed for a single list per parameter, which was still insufficient for all but the most simple algorithms.
** I'm skipping a lot of taxonometric classifications here to keep it simple.…
Added by David Rutten at 2:22pm on January 20, 2015
DP ($$$ aside), GC, and Grasshopper. Arthur’s original question is very important
and the exact question (and hopefully answer) I was hoping to find on a
forum.
“How to take intelligent 3D parametric generative design models (scripting, etc.) into 2D documents?" Or, deliver the 3D design for evaluation, bid, construction, etc.
I am intrigued by Jon’s comments in the same thread and would like to know how I can learn more about the process (and
pitfalls) of turning over a 3D digital generative models to a contractor/fabricator.
Are there any industry guidelines established I could use as a reference to guide our firm through this type of uncharted territory?
Arthur’s question is very reminiscent of 10 years ago when I was frustrated with the amount of time spent on the development of a 3D model design (physical and/or virtual) only to have to wipe the table clean and start the process all over again in 2D in order to document the project for delivery. From this I jumped head first into BIM and Revit, vowing never to go back to unintelligent 2D line work. I am now working on Bentley software (v8i: Microstation and Bentley Architecture) with the access and desire to venture into Generative Components. I am very intrigued by Rhino/Grasshopper primarily with the apparent ease of use and available resources assisting in the learning process – something not really available with Bentley.
In hindsight, as I am doing my software research I think the current use of Revit and BA (Bentley Architecture) are more of a “bridge”
between the past (decades of digital 2D work, i.e. AutoCAD) and where hopefully
we all will be someday in the near future (100% 3D modeling, i.e. Digital
Project??). Without having the experience
it would appear that DP/CATIA (PLM software) are closer to this than any other
type of software. As complicated as the
industry standards are for the automobile and airline industry, I feel we
(architectural industry and others) are heading in a similar direction with
total understanding (PLM/ Evidence Based Design) of a design (a whole other topic). If anything I think the market will begin to
demand it sooner or later.
Gehry (DP) article NY Times:
http://www.nytimes.com/2009/02/11/business/11gehry.html
I know these type of broad discussions (software vs. software) can be blown out of proportion on forums, but I am would like to read
the pulse of those who are already in the trenches (using Grasshopper, CATIA, Digital Project, Generative Components, others??) and hear your thoughts. Just as valuable would be other threads,
industry articles/reviews of 3D parametric generative design software.
Thanks,
Boyd…