" (idiomatic) and easy way of doing things.So here come some basic questions:
Is there a way to create custom components by grouping an existing sub-network together? I'm looking for a way to re-use parts of a program (something similar to subroutines), and to make the network look less cluttered. I found that it is possible to group components (ctrl-g), but this still displays them as separate blocks (too much clutter), and provides no way to re-use a sub-network in such a way that if it is modified in one place, all it's instances (all the places where it is re-used) also get modified.
Is there a component that does nothing, just passes a signal through? Suppose I need to connect block A to blocks B1, B2, B3 (all three get the same input). Then I change my mind, and I decide to connect block C to these three, not A. In this case it will be necessary to change three connections, not just one. I'm looking for an easy way to do this by a single rewiring, not three. (This came up in a practical situation).
Finally, a related question: is there a component that acts as a switch, so I can choose which signal it passes through out of a possible set of choices? For example, suppose that a set of objects can be coloured based on a number of different properties (size, positions, rotation, etc.) I'm looking for a way to switch between these very easily, without the need to do much rewiring.
Thank you in advance for any replies / useful comments, even general ones on how to easily structure a large Grasshopper program/network.…
at 0.85m above the floor.
I copy paste from the Appendix E:Rights to Light of the book "Paul Littlefair, Site Layout Planning for Daylight and Sunlight, A good practice, BRE Press, p.60" which is the primary guide for evaluating the impact of new construction to the Rights to Light of the existing adjustment buildings:
"The accepted way of calculating the loss of light is to compute the sky factor at a series of points on the working plane. In dwellings, the working plane height is usually taken to be 0.85 m (two feet nine inches). The sky factor is the ratio of the illuminance directly received from a uniform sky at the point indoors, to the illuminance outdoors under an unobstructed hemisphere of this sky. No allowance is made for glass losses or light blocked by glazed bars and (usually) window frames; nor is reflected light included, either from interior surfaces or obstructions outside. Thus the sky factor is not the same as the CIE daylight factor (see Appendix C). The sky factor is often calculated using a Waldram diagram, but this is a different Waldram diagram to Figure B1 in Appendix B, which should not be used for this purpose."
Thought couldn't find the specific Waldram diagram for this case from the references, I assume contemporary analytical tools should exist to calculate it.
I used your Vertical Sky Component process and culled the mesh faces lower than 0.2% but I believe because of they type of the radiance analysis as you have explained it before (stochastic method) it doesn't create one continuous edge, as you can see in the attached image.
Thanks,
Dimitris…
13;2} ... 20.{13;12}
21. {21;0}22. {21;1}23. {21;2} ... 41. {21;20}
42. {34;0}43. {34;1}44. {34;2} ... 75. {34;33}
76. {55;0}77. {55;1} ... ....
I want to grab the first 8 [0-7], the next 13[8-20], the next 21[21-42] etc
so i have the (known fibonacci seq) list of numbers on the left here:
C S
8 0
13 8
21 21
34 42
55 76
89 131
144 220
233 364
and i need the list on the right, so that i can select items using a Series (N=1 and S and C from the list above) and a List Item component.
the simple question is:
is there a component that can take a list and accumulate it in this way that I need?
if not, is there anyone that can point me to a simple relevant VB example so i could easily adapt it?
many thanks,
gotjosh…
edit 29/04/14 - Here is a new collection of more than 80 example files, organized by category:
KangarooExamples.zip
This zip is the most up to date collection of examples at the moment, and collects t
frontare il tema della modellazione parametrica con Grasshopper. Questa plug-in di Rhino consente di progettare, confrontandosi con un contesto evolutivo, attraverso la comprensione e l'utilizzo di parametri e componenti che influenzano la rappresentazione e la rendono dinamica componendo algoritmi. Nel corso verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse.Le informazioni teoriche saranno fornite in maniera accelerata ma organica e contestuale agli argomenti elencati. Per massimizzare i risultati, le lezioni saranno accompagnate da piccole esercitazioni pratiche.Argomenti trattati:- Introduzione alla progettazione parametrica: teoria, esempi, casi studio- Grasshopper: concetti base, logica algoritmica, interfaccia grafica- Nozioni fondamentali: componenti, connessioni, data flow- Funzioni matematiche e logiche, serie, gestione dei dati- Analisi e definizione di curve e superfici- Definizione di griglie e pattern complessi- Trasformazioni geometriche, paneling- Attrattori, image sampler- Data tree: gestione di dati complessiStrutturaIl corso ha una durata di 16 ore programmate nell'arco di 2 giornate con i seguenti orari: i giorni 28/07 e 29/07 dalle 10,00 alle 19,00 con pausa pranzo di un'ora.DestinatariIl corso è rivolto a tutti coloro che hanno buone conoscenze di Rhinoceros e vogliono affrontare i nuovi metodi di progettazione in maniera consapevole attraverso il linguaggio visual scripting proposto dal software Grasshopper.PrerequisitiPer affrontare il corso è richiesta una conoscenza di base del software Rhino attraverso esperienze teoriche e pratiche. I partecipanti dovranno venire muniti di proprio laptop e con software Rhinoceros 5 o Rhinocero 4 perfettamente funzionanti.AttestatoAlla fine del corso verrà rilasciata l’attestato di partecipazione ad un corso qualificato McNeel valido per l’ottenimento di crediti formativi universitari.LuogoLe lezioni si terranno presso lo studio il Pedone in Via Muggia 33, 00195 ROMA…
erona, nei giorni 01,02 e 03 dicembre 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 16 novembre 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Glas Müller.…
umbrella of Urban Heat Island (UHI) and I am going to try to separate them out in order to give you a sense of the current capabilities in LB+HB.
1) UHI as defined as a recorded elevated air temperature in an urban area:
If you have access to epw files for both an urban area and a rural area, you can use Ladybug to visualize and deeply explore the differences between the two weather files. Ladybug is primarily a tool for weather file visualization and analysis and it can be very helpful for understanding the consequences of UHI on strategies for buildings or on comfort. This said, if you do not have both rural and urban recorded weather data or you want to generate your own weather files based on criteria about urban areas (as it sounds like you want to do), this definition might not be so helpful.
2) UHI defined by air elevated air temperature but viewed as a computer model-able phenomenon resulting primarily from urban canyon geometry, building materials, and (to a lesser degree) anthropogenic heat:
This definition seems to fit more with they type of thing that you are looking for but it is unfortunately very difficult and computationally intensive such that we do not currently have anything within Ladybug to do this right now. I can say that the state-of-the art for this type of modeling is an application called Town Energy Budget (TEB) and this is what all of the advanced UHI researches that I know use (http://www.cnrm.meteo.fr/surfex/spip.php?article7). Unfortunately for those trying to use it in professional practice, it can take a while to get comfortable with it and it currently runs exclusively on Linux (this does mean that it is open source, though, and that you can really get deep into the assumptions of the model). A couple years ago, a peer of mine translated almost all of TEB into Matlab language making it possible to run it on Windows if you have Matlab. He wrapped everything together into a tool called the Urban Weather Generator (UWG), which can take an epw file of a rural area and warp it to an urban area based on inputs that you give of building height, materials, vegetation, anthropogenic heat, etc. I would recommend looking into this for your project, although, bear in mind that is it not open source like the original TEB tool and that you may need to get a (very expensive) copy of MATLAB (http://urbanmicroclimate.scripts.mit.edu/uwg.php).
3) UHI as defined by a thermal satellite image of an urban area depicting an elevated average radiant environment that reaches a maximum a the city center and changes by land use:
This is the definition of UHI that I am most familiar with and was the basis of much of my past research. I feel that it is also a definition of UHI that is a bit more in line with where a lot of contemporary UHI research is headed, which is away from the notion of UHI as a macro-scale meteorological phenomena that is averaged as an air temperature over a huge area towards one that accepts that different land uses have different microclimates and (importantly) different radiant environments. While the air temperature difference between urban and rural areas usually does not change more than 1-4 C, the radiant environment can be very different (on the order of 10-15 C differences). The best way to understand UHI in this context is with Thermal satellite images, for which there is ha huge database of publicly available data on NASA's glovis website (http://glovis.usgs.gov/) or their ECHO website (http://reverb.echo.nasa.gov/reverb/#utf8=%E2%9C%93&spatial_map=satellite&spatial_type=rectangle). I tend to use thermal data from LANDSAT 5-8 and ASTER satellites in my research. Unfortunately, there is a lot f bad data with a lot of cloud cover mixed in with the really good stuff and it can take some time to find good images. Also, there aren't too many programs that read the GeoTiff file format that you download the data as. I know that ArcGIS will read it, a program called ENVI will read it (I think that the open source QGIS can also red it). I have plans to write a set of components to bring this type of data into Rhino and GH (I may get to it a few months down the line).
4) UHI as a computer model-able notion of "Urban Microclimate" with consideration of local differences and the local radiant environment:
This is where a lot of my research has lead and, thankfully, is an area that Honeybee can help you out a lot with. EnergyPlus simulations can output information on outside building surface temperatures and these can be very helpful in helping get a sense of the radiant environment around individual buildings. Right now, I am focusing just on using this data to fully model the indoor environments of buildings as you see in this video:
https://www.youtube.com/watch?v=fNylb42FPIc&list=UUc6HWbF4UtdKdjbZ2tvwiCQ
I have plans to move this methodology to the outdoors once I complete this initial application to the indoors. For now, you can use the "Surface result reader" and the "color surfaces based on EP result" components to get a sense of variation in the outside temperature of your buildings.
I hope that this helped,
-Chris
…
oxes in the most efficient way within boundaries of object and follow the following constraints. The Goal: To fit 125 boxes in the most efficient way inside the total area. Starting Variables: (1) 40% of the Boxes need to be between 60 and 85MSQ. (2) 40% of the boxes need to be between 86 and 110MSQ.
(3) 20% of the boxes need to be between 111 and 125mSQ. The breakdown doesn’t have to be exact to give the script some flexibility. Meaning you can have 41% +39% +20% = 100%.
Constraints:
1. A total MAXIMUM area of approximately 1600M per layer.
2. A maximum of 8 layers for a total of 12,800M per layer. Optimization can make as little or as many as 8 layers vertical to accommodate all boxes. So if script can achieve with 3 levels great. If needed all 8 levels, that's fine too. However, pay attention to next constraint (#3).
3. Approximately 15% of that space on each layer is off limits. (internal area) (blue area in example script) and the shape of the boundary cannot be modified to accommodate box design resulting in jagged lines for the internal area.
4. All generated squares/rectangles must have at least 3m touching an outside border (The Green lines).
5. All boxes must also be touching minimum 1M of border of the blue line.
6. If the boxes generated go outside the green boundary, they must be fillet to maintain the straight lines of the green boundaries.
7. Get as many of the boxes as possible a view towards the dots.
Could any one provide me a method or a way to start, if there are any useful links, please share with me. Thank you!…
Boxes in the most efficient way within boundaries of object and follow the following constraints.
The Goal: To fit 125 boxes in the most efficient way inside the total area. Starting Variables:
(1) 40% of the Boxes need to be between 60 and 85MSQ. (2) 40% of the boxes need to be between 86 and 110MSQ.
(3) 20% of the boxes need to be between 111 and 125mSQ. The breakdown doesn’t have to be exact to give the script some flexibility. Meaning you can have 41% +39% +20% = 100%.
Constraints:
1. A total MAXIMUM area of approximately 1600M per layer.
2. A maximum of 8 layers for a total of 12,800M per layer. Optimization can make as little or as many as 8 layers vertical to accommodate all boxes. So if script can achieve with 3 levels great. If needed all 8 levels, that's fine too. However, pay attention to next constraint (#3).
3. Approximately 15% of that space on each layer is off limits. (internal area) (blue area in example script) and the shape of the boundary cannot be modified to accommodate box design resulting in jagged lines for the internal area.
4. All generated squares/rectangles must have at least 3m touching an outside border (The Green lines).
5. All boxes must also be touching minimum 1M of border of the blue line.
6. If the boxes generated go outside the green boundary, they must be fillet to maintain the straight lines of the green boundaries.
7. Get as many of the boxes as possible a view towards the dots.
Could any one provide me a method or a way to start, if there are any useful links, please share with me. Thank you!
…