akes the linear regression of the Schroeder integral over 30 dB worth of decay. Whether it is T-15 or T-30, they all seek to estimate the RT, which is always always the time it takes for sound to decay 60 decibels.
The website has benchmarks, for your reference. You can find them under the 'Pachyderm' drop down menu, under 'Benchmarks'.
Your model may well require millions of rays to be accurate. It sounds like a very large space. I'm sorry if that is an unpleasant answer. Sometimes it does help to have a computer with more cores to help with this. I have gotten up to 90% processor usage on a 12 core machine before.
Arthur…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…
intersection-elements (01/AA etc)
To get a result from RInt i do have to flatten the first set and do have to graft the second. Therefore i can only retrieve the parent-information from the second set.
I hope i could explain my problem and somebody has an easy solution on hand...
Best regards,
Heiko
PS. ObjAtts in the attached files is from human…
Added by Heiko Wöhrle at 10:11am on October 27, 2016
by arch.tualize and AWARE in partnership with the Städelschule Architecture Class (SAC), Frankfurt and will be held at the campus of SAC from 21 July – 1 August 2014. The lab engages students, architects, designers and game developers with four techniques of prototyping: designer-informed, analytics-driven, crowd-operated and sensor-actuated. Participants learn to use digital and parametric design tools and engage with feedback collected from simulation algorithms, online users and real-world sensors. The acquired knowledge will be applied to designing interactive prototypes ultimately exhibited at an open public exhibition at the Städelschule
To learn more and apply visit: www.summerlab.info…
raw a single line that intersects them all. I'm also not certain what the metric for "closest" would be if you have more than three lines all intersecting each other. What groups of three can you find here:
This is not just splitting hairs, when designing a new algorithm it is important to always figure out whether:
There is ever a case with more than one possible solution.
There is ever a case with no possible solutions.
Does the algorithm change the state of the problem while it runs, i.e. whether run order matters.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
stepper motors with an arduino DUE ( 84 MHz clock) so would be faster than an UNO (16 MHz).
The problem : The DUE is selectionned, detected and I can open the port in grasshopper, but when I try to send any mouvement with the stepper component.. isn't moving at all.
Also when I try to read the serial monitor with the generic serial read component is also not reading anything coming from the due card (I tried the programming port and the USB communon port from the DUE).
To now : Sending mouvement with the Accel Stepper library directly with the Arduino IDE works, Wich means that the problem is directly coming from the communication between the Firefly's Grasshopper component and the arduino Due
The due : www.arduino.cc/en/Main/arduinoBoardDueThanks for your time :-)…
ion technologies offer a completely new way to think and approach design, architecture and urban planning.
. . .
The ADVANCED ARCHITECTURE SUMMER SCHOOL organised in Paris by VOLUMES coworking, NOUMENA architecture and architect/teacher/designer Francesco Cingolani in partnership with the prestigious École Nationale des Ponts et Chaussées is a 3 weeks learning experience designed as an immersive journey in social innovation, computational design, digital fabrication and collaborative culture.
Details and informations for applicants> volumesparis.org/summerschool2015…
r).
http://www.agrob-buchtal.de/en/cd/produkte/produkte_seiten_13045.ht...
2. 1 puts some "modular Z" increment puzzles (for more than obvious reasons). Additionally the excavation cost VS any ECO-benefits ... (heat exchangers in the foundation blah blah). OK that means that the footprint it's also modular., not to mention the whole composition (potentially).
3. So: use the projection ONLY for defining where a given footprint meets the terrain (see the yellow and blue things in V2) and then LOFT pairs (see PlanA, B) of profiles into 2 DISTINCT portions ("solids" so to speak): (a) the basement (or at least something where some potential partitions could being classified as "underground" spaces), (b) the classic building.
4. By doing 3 ... keep an eye on 2 as well (Don't forget the classic minor terrain "adjustments" around each building (meaning usage or "tmp" solids), access roads/pavements (ditto), potential connection of basements (parking), soil stabilization issues, bad seismic behavior on unevenly(Z) formed basements etc etc).…
per space. In the upper right corner you draw another dot, and you write "1, 1" next to it. You now have 2 points defined in paper space (uv space).
Ok, lay down the pencil and pick up the paper. You'll notice that the two points have just moved through world-space. They were very close to the desk, but now they are hovering above it. The coordinates you wrote down on the paper or the other hand are still valid.
No matter what you do to this piece of paper; crumple it, fold it, take it on a plane to South Africa, those two points remain fixed in paper space.
A surface is always a rectangle in Rhino. It may be deformed, it may have holes cut into it, but in the end it's always a rectangle, just like your piece of paper. UV coordinates are points that are defined in Surface UV space. They consist of only two numbers, because a surface has no thickness. At any point in time, you can translate these UV points into World XYZ points using what is called a surface evaluator. Where these XYZ points end up depends entirely on the *shape*, *size* and *location* of the surface.
----
Surface uv-space (and Curve t-space) are vital when dealing with nurbs geometry. If you do not understand the concept of parameter space, you will have a lot of problems because many components in Grasshopper use these coordinates.
--
David Rutten
david@mcneel.com
Seattle, WA…
Added by David Rutten at 6:40pm on September 27, 2009