nza dal centro delle facce ad un punto fisso per determinare quant'è il valore dell'offset per quella faccia.
Prova questa soluzione per ora:
- abilita il componente disattivato all'inizio;
- il componente curve offset non funziona bene, domani vedo se riesco a crearne uno migliore;
- inforna (bake) la brep risultante e convertila in mesh da rhino;
- per dargli spessore, fai l'offset solido della mesh in rhino per l'ultima fase, funziona meglio.
I've used the distance from the center of the faces to a fixed point to determine the value of the offset.
Try like this:
- enable the first component disabled;
- offset curve don't work perfectly, I'll try to fix it maybe...
- bake the brep and convert it into mesh in rhino;
- for the thickness, do a solid offset of the mesh in rhino for last phase, it just works better.…
n account of the position of the sun and weather cannot be expressed in terms of a single set of luminous intensity values (which is what IES files do).
With regards to your example files, I agree with Chris. The primary reason for the low illuminance levels is that the light bounces are getting lost in the tube. Have you checked with the manufacturer/distributor if the location of the IES file should be inside the tube and not flush with the ceiling? Physically modelling such tubes in lighting software like Radiance (which is what HB uses) or AGI32 is a fairly expensive proposition. This is one of the reasons why manufacturers provide photometric data for such devices (however simplistic that data might be).
The candelamultiplier increases or decreases the luminous intensity values. So it will have a direct impact on the calculation. The primary reason for having that input was to enable users to do some testing with different lamp types and environmental factors such as dirt depreciation. You need not change them for your simulation. Assuming that the IES file is inside the tube, in order to make this calculation work inside HB you'd have to crank up the calculation settings to a very high level (start with -ab 10 -ad 4096).
Finally, due to shortcomings in the annual simulation software (Daysim), IES files will not work directly work with annual calculations. However, there is a fairly easy workaround for that issue. In case you are planning to run annual calculations with IES files, please let us know here.
Sarith…
me research involving shades and and solar radiation and I need the sun's path through the entire year to fully optimize the design. This far I've been able to simulate what I want by having my shadders following a mock solar orbit around them, what I need to know is to use a model that simulates solar paths, use it as an attractor point and have my shadding surfaces follow it, pretty much like that I am doing right now (or so I think)
Here's where my questions come around:
I remember finding somewhere on the internet a definiton that simulates the sun's path through the year; I think I can find it again and use it for my purposes. I think that I could just run the GH definition, bake the geometry and then upload it to Ecotect and have it run so I can get the data and keep working over that, then feed the geometry again to Ecotect, ad nauseam. However I think that is a very slow process.
Is there a way that I can run an Ecotect plug in of sorts within GH, that way I can get my data IN grasshopper and model accordingly?
Does that make sense?
Thanks a lot for any input.…
Added by Antonio Tamez at 3:40am on October 24, 2011
s for the sunlight hours analysis.
I'm producing BRE Annual Probable Sunlight Hours calculations and so to match the BRE approach, I'm using 100 sun vectors, each representing 1% of probable sunlight hours. I could use the Sunpath and Analysis Period components to produce sun positions for the whole year, but this gives results that do not fully reflect the BRE methodology - which is important here. I'm detailing this just to clarify that this isn't a full annual calc of 8760 hours for 350 surfaces.
Anyway, when I run the calc, it takes about an hour to run, but the Sunlight Hours Component itself reports a calculation time of 3 seconds! Does this mean that the rest of the time is all about prepping the brep geometry? If so, is there a reason why this is much slower than when using a view of sky recipe and exporting to radiance. For the same project, I completed a view of sky calculations and based on the number of test points and -ad setting, this was completing about 5.25 billions rays so I understand why that took an hour.
Any thoughts as to why the sunlight hours calc seems to take so long?
thanks
Nick
…
s topology gets pretty bad for use in CAD programs, since they are "in and out" at the same time. Generate naked edges and non-manifold edges. The problem itself is when I make an offset of the surfaces, which create "bad objets" in Rhino. I'm using Mantis, a plugin for Mathematica software, and one based on this the Math Surfaces script from http://www.co-de-it.com/wordpress/code/grasshopper-code. Both give me errors. I have tried to make a merge with the normal flip in the same model, but the error continues. If I do a split, in Rhino, there is no problem to create a solid offset, but the opposite is totally different if I make a Mirror. Can you help me with this complicated issue? Thank you.…
starting as soon as possible.
We're offering challenging projects, insights and contact to leading industry companies, project responsibilities according to abilities and initiative, great work environment and laid-back atmosphere, room to play and evolve,...
Our ideal candidate:
- is passionate about construction, engineering and (computational) design
- is proficient in Rhino / Grasshopper / (GH-)Python
- knows his ways around the Adobe Suite and MS Office
- has a current work permit for Germany
- is a German speaker (other native speakers also welcome, with excellent English skills)
- has an architectural background (Student / BA / MA /...), ideally with work experience
- is interested / has experience in digital manufacturing and prototyping
- will be able to join us shortly
We're looking forward to your applications / inquiries / CVs to: mpelzer@fat-lab.de
View our past projects here: www.fat-lab.com
(Current projects, unfortunately, are non-disclosed)
…
try to get the output. In this case the output needs to be set before requesting for it. I am doing it with this call:
ret = gsaobj.Output_Init_Arr(1,"Global","A1",14003001,3)
In API help the call is documented like this:
short Output_Init_Arr (long iFlags, string sAxis, string sCase, enum ResHeader header, long num1dpos)
so this call has 5 arguments (long, string, string, long, long) (the enums are defined as longs)
This call works, because when I print the ret, i get 0 that is "succeded" so everything works so far.
Then I request the output with the following:
results = []
ret = gsaobj.Output_Extract_Arr(10,results,numcomponents)
In API help the call is documented like this:
short Output_Extract_Arr(long iRef, SAFEARRAY(struct GsaResults)*arrayResults, long* numComponents)
I am getting the error "
Runtime error (ArgumentException): Could not convert argument 1 for call to Output_Extract_Arr."
So it seems that is not accepting 10 as a long in the beginning (assuming that argument 1 is the first). I already tried passing a variable as long, using long(10) there, nothing works.
Furthermore I don't know if the other two variables are correct like that. I come from VBA where I need to declare everything but AFAIK python is more permissive in this sense. "results" should be a dynamic array of objects and "numcomponents" a long.
Any help would be appreciated!
Thanks! :)
…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
eventually found out about genetic algorithms on which I found extensive researches, projects,... ! I looked into it and ended up on a few papers which I believe are the jumpstart for my master thesis.
"Galapagos; on the logic and limitations of generic solvers" by David RuttenArticle in Architectural Design 83(2) March 2013
"Black-box optimisation methods for architectural design" by Thomas Wortmann and Giacomo NanniciniConference Paper: CAADRIA 2016, At Melbourne, AU, Volume: 177-186
So I started looking into alternatives to genetic algorithms in architectural design.So far, I've ended up on :
Thomas Wortmann's work with the surrogate(or model) based optimization approach!You can check out the tool he developped for GH (Opossum):http://www.food4rhino.com/app/opossum-optimization-solver-surrogate-models
Judyta Cichocka's work, specially with the Swarm approachYou can check out the tool she developped for GH (Silvereye):http://www.food4rhino.com/app/silvereye-pso-based-solver
And that's it !!! I've been researching through article references (mainly on "researchgate") but I'm now stuck in a loop of references I already visited!That probably means the litterature on the subject is not (yet) extended but I might probably be missing something.The keywords make it difficult to search : "optimisation", "algorithms", "architecture", send me most of the time to computational engineering and deep mathematics papers I unfortunately do not have the background knowledge to comprehend ! So there it is ! If you have any clue of where (or how ! ) I should be looking, please tell me :)I know Mr Rutten is pretty active on the forum so hopefully... (fingers crossed :p) !Also if you have any good tips for getting into algorithms in general (you think could help), I'd be glad to hear(read) it ! A book, tutorials maybe ?!So, autors, architects, projects books, articles, conferences I should go to,specialized architecture offices/studios (I'm also looking for an internship so ...).If you know about a more appropriate forum please let me know !If you want to get deeper into this, you can contact me at :
e1635331@student.tuwien.ac.at
tdissaux@student.ulg.ac.be
My master thesis is due for may 2018 but I have a paper to write for January 2018 in order to be elligible for a PHD program afterwards.What I mean by that is that if you read this message in 6 month, I'll still be open to discussion !
I am right now an erasmus student at TUWien (Vienna) but my main university is The university of Liège in Belgium.I can handle French, English, Italian litterature and eventually Dutch if really you think it's worth it ! I have access to most online libraries via my university's portals so access shouldn't be an issue !I'm very excited to hear from you I wish you all a great day,Cheers,Thomas
…