onsidered period.
Even if the end of July for the mediterranean climate is not the best period to perform an adaptive comfort analysis (it's just a pretest to define a LB model) I want to refine the Adaptive comfort Chart (AC) by changing the external air temperature data imported from the .epw file with that of monitored data as reported here below:
Where the monitored ext air temperature are in this form (green panel below):
I have used the comfortPar component to set the following parameters:
Adaptive chart as defined by EN 15251
90% of occupants comfortable
the prevailing outdoor temperature from a weighted running mean of the last week
fully conditioned space (even if it is not properly in line with AC as already discussed)
The question is this: the AC component could correctly apply the code below if there is only a list of external temperature data for a restricted period (without indication about the limits of this period) and not for an entire year?
else: #Calculate a running mean temperature. alpha = 0.8 divisor = 1 + alpha + math.pow(alpha,2) + math.pow(alpha,3) + math.pow(alpha,4) + math.pow(alpha,5) dividend = (sum(_prevailingOutdoorTemp[-24:-1] + [_prevailingOutdoorTemp[-1]])/24) + (alpha*(sum(_prevailingOutdoorTemp[-48:-24])/24)) + (math.pow(alpha,2)*(sum(_prevailingOutdoorTemp[-72:-48])/24)) + (math.pow(alpha,3)*(sum(_prevailingOutdoorTemp[-96:-72])/24)) + (math.pow(alpha,4)*(sum(_prevailingOutdoorTemp[-120:-96])/24)) + (math.pow(alpha,5)*(sum(_prevailingOutdoorTemp[-144:-120])/24)) startingTemp = dividend/divisor if startingTemp < 10: coldTimes.append(0) outdoorTemp = _prevailingOutdoorTemp[7:] startingMean = sum(outdoorTemp[:24])/24 dailyRunMeans = [startingTemp] dailyMeans = [startingMean] prevailTemp.extend(duplicateData([startingTemp], 24)) startHour = 24
…
ss lots of questions,Hope guys show me some more different ways to figure out thoes kinds of problems,Thanks.
That is a construction project,the balconies should be overhang between 1 to 3 meters.
Program A is a patten consist of increasing balconies as the floors get upper.(In the picture is 29 at the first floor and ended with 2 more balconies for each floor, )Each part for a different floor,the twelfth floor have 29+(12-1)*2=51 balconies.
Questions From A,
A1:How to use the {(series)} to creat this atrium,As the floors increase the number of the balconies change by arithmetic progression.
A2:How to control the angle of the balconies,both the angle with floor and the balconies ending part.
Program B is use line to shape the commercial atrium,program A is more small pieces of rectangles.The {(TweenCrv)} command.
Questions From B,
B1:How to draw random points between the 1 to 3 meters region of the balcony,And those point form a shape also belongs to that region.
B2:Use a curve or other ways to control the changing speed of each floors' balcony.Right now the balcony is a Linear change.
Thanks for your Help.
Q1:Is there a way in Grasshopper to control the model to Modulus,less different unit parts to build such a Atrium.(For Exanple,only use 900mm and 600mm two different width of the Glass railings to bulid the model A OR B)…
troducción a su plugin de modelado paramétrico, Grasshopper.
Con este tipo de herramientas podemos pensar formas más allá de las cajas para diseñar, porque seremos capaces controlar con total rigor geometrías muy complejas.
En el siguiente video, podemos ver un ejemplo realizado durante un curso impartido anteriormente en Madrid por el profesor, Francisco Tabanera, en el que se realiza una interpretación del proyecto de BIG para la Biblioteca Nacional de Kazajstán.
<a title="Interpretación de la Biblioteca Naiconal de Kazakstan, de BIG" href="http://www.youtube.com/watch?v=YLldO-SxgPw" target="_blank"></a>
A lo largo del curso se realizarán diferentes ejemplos que podrán ser realizados por todos los asistentes, ya que no es necesario ningún conocimiento previo para su seguimiento.
El curso se desarrollará en las oficinas de Arquitecton en Barcelona con el siguiente horario:
HORARIO
Sábado 1 de Marzo
De 9.30 a 13.30h.
Sábado 1 de Marzo
De 15.30 a 19.30h.
El curso está planteado para un máximo de 9 alumnos, para conseguir el máximo aprovechamiento posible por parte de los mismos.
El curso tiene un precio de 90€. Estudiantes y desempleados tienen un descuento del 10%. Es posible asegurarte una plaza con un primer pago de 25€ a modo de reserva.
Apúntate aquí…
next level.
This Parametric Design course will provide the participants with the necessary knowledge and ability to use Grasshopper, a free visual programming plugin in Rhinoceros; you will be guided through a series of hands-on exercises that highlight NURBS modeling and its concepts. We will introduce Grasshopper as a graphical algorithm editor tightly integrated with Rhino’s 3D modeling tools. You will also learn how Rhino is used to render models for visualization, translate 3D models for prototyping, and export 3D models into 2D CAD or graphics programs.
English is the course main language.
Location: Düsseldorf city center
Registration and buying Tickets
www.digitalparametrics.eventbrite.de
Course Calendar:
4 Days 6 hours each
Total duration 24h
2 weekends
Date:
Sat. 17 - Sun. 18 June
Sat. 24 - Sun. 25 June
10:00 - 17:00
Getting Started in Rhino. 2 days (17 - 18 June)
Getting Started in Grasshopper. 2 days (24 - 25 June)
-----------------------------------------------------------------------
Participants will be given a certificate of participation at the end of the course.
-----------------------------------------------------------------------
Course fees:
Professionals: 600€ (excl. MwSt.) Students: 500€ (excl. MwSt.) Students need to provide: Copy of current student ID or proof of student enrollment at University/School.
Group discounts:
Group of 3 professionals: 3x500 = 1500€ (excl. MwSt.)
Group of 3 Students: 3x400 = 1200€ (excl. MwSt.)
Participants are kindly asked to bring their own laptops and have pre-installed Rhino + Grasshopper.
Useful Resources:
Rhinoceros Installation (90 days full version trial available): http://www.rhino3d.com/download
Rhinoceros for Mac (includes Grasshopper) http://www.rhino3d.com/download/rhino-for-mac/5/wip
Grasshopper Free Installation: http://www.grasshopper3d.com/page/download-1
Grasshopper Free Plugins: http://www.food4rhino.com/app/lunchbox http://www.giuliopiacentino.com/weaverbird
Main Tutor:
Rihan
M.A. Dipl.Ing. Architect
Architect at RKW Architektur + Düsseldorf
For any questions about the course, please email: info@immersive-studio.com…
ll geometry.
The difference with programs like Inventor is that they are made for production, regardless of the fabrication method. I won't go into detail about that, and instead focus on the modeling process.
In this little model, the starting point actually is a bit obvious, the foundation.
The only contents in the 3dm file are 27 lines. These indicate the location of each footing, and the direction of the tilt of each column. Everything else is defined in GH with the use of numbers as input parameters.
Needless to say, instead of those lines you could obviously generate lines and control the number of columns and panels, hence establish their layout, with any algorithmic or non-algorithmic criteria you please. That marks a major difference between GH and Inventor.
You can generate geometry with Inventor via scripting/customization (beyond iLogic), with transient graphics for visual feedback similar to GH's red-default previews. However Inventor's modeling functions are not set to input and output data trees. I won't go into detail on that, but suffice to say that the data tree associativity of GH was for me the first major difference I noticed. I've used other apps with node diagram interfaces like digital fusion for non-linear video editing since the late 90's, so the canvas did not call my attention when I first started using GH.
Anyways, here's a screen capture of the foundational lines:
In the first group of components, the centerlines of the rear columns are modeled:
And the locations in elevation for connection points are set. Those elevations were just numbers I copied from Excel, but you can obviously control that any way you please. I was just trying to model this quickly.
The same was done for the rear columns:
The above, believe it or not, took me the first 5 hours to get.
Here's a screen capture of what the model and definition looked like after 4 hours, not much:
If you're interested, next post I can get into the sketching part you mentioned, which is a bit cumbersome with GH, but not really.
I wouldn't say that using GH to do this little model was cumbersome, it just needed some thinking at the beginning. You do similar initial thinking when working with a feature-based modeler.…
Added by Santiago Diaz at 12:44am on February 24, 2011
akes the linear regression of the Schroeder integral over 30 dB worth of decay. Whether it is T-15 or T-30, they all seek to estimate the RT, which is always always the time it takes for sound to decay 60 decibels.
The website has benchmarks, for your reference. You can find them under the 'Pachyderm' drop down menu, under 'Benchmarks'.
Your model may well require millions of rays to be accurate. It sounds like a very large space. I'm sorry if that is an unpleasant answer. Sometimes it does help to have a computer with more cores to help with this. I have gotten up to 90% processor usage on a 12 core machine before.
Arthur…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…
what they really mean by that, as in what buttons to push, so I assume it's a Windows Path entry?
2.) Modify PATH
Add the install location on the path, this is usually: C:\Program File\IronPython 2.7
But on 64-bit Windows systems it is: C:\Program File (x86)\IronPython 2.7
As a check, open a Windows command prompt and go to a directory (which is not the above) and type:
> ipy -V PythonContext 2.7.0.40 on .NET 4.0.30319.225
Tutorial on setting a Windows environmental variable (path):
http://www.computerhope.com/issues/ch000549.htm
But this fails to point out that path contains many entries already separated by semicolons so if I merely add a new variable called "path" it's likely that I will destroy existing program function. There's no info on how to just tack on another entry, and the Windows 7 edit box doesn't even show the whole collection, but one item (!), so I copied the existing path into a text editor to see the whole collection successfully and added the C:\Program Files (x86)\IronPython 2.7 entry after an added semicolon, correcting for an Enthought page typo of no 's' on the end of "Program Files". I also checked the others and many pointed to old missing directories so I deleted those entries.
...and the test fails and "ipy" is not recognized as a command, even though the path now shows up using "path" in the Windows CMD window, that is if I copy all by right clicking and pasting the stuff into a text editor to really view it all. I can run it from the source directory just fine.
The rabbit hole was indeed deep. Using the Task Manager (control-alt-delete) to kill Explorer and then Run in the menu to restart "Explorer," along with restarting the Windows CMD window however, worked. I can now invoke Iron Python ("ipy") via command line from any directory. For the "path" I edited path in the System Variables and not the User Variables. No, you don't have to type that whole crazy line above just to test the path variable, just "ipy" (and control-Z to quite IronPython) in the CMD window invoked by typing "cmd" into the Start menu search box.
From the CMD line this step did work fine:
3.) ironpkg
Bootstrap ironpkg, which is a package install manager for binary (egg based) Python packages. Download ironpkg-1.0.0.py and type:
> ipy ironpkg-1.0.0.py --install
Now the ironpkg command should be available:
> ironpkg -h(some useful help text is displayed here)
But of course Step 4 fails, giving pages of what seem to be error messages;
C:\Users\Nik>ironpkg scipy
Traceback (most recent call last):
File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.
py", line 92, in write_data_from_url
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 126, in urlo
pen
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 397, in open
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 509, in http
_response
...
Why can't I just download Numpy as a normal file and thus also have it easy for other users to install it when they use my scripts? This is just crazy and lazy. The Enthought developer has turned this into a computer game, with a missing registration link and then the last step spits out errors with utterly no information on how to fix it manually.
This Step 4 error is covered here:
http://discourse.mcneel.com/t/trying-to-import-numpy-in-rhino-python-but-im-getting-this-error-cannot-import-multiarray-from-numpy-core/12912/16…
Added by Nik Willmore at 2:36pm on October 11, 2015
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…