he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
assume we want to format two numbers, one integer and a floating point value. The integer represents an index and it should appear inside square brackets, then we want the floating point number rounded to a maximum of 4 decimal places (but always using at least one decimal place, even if it's zero), and then, in parentheses a scientific notation representation using 8 decimal digits of the number.
So, assuming the index is 16 and the value is 47.280006208, what we are after is:
[16] 47.28 (4.72800062E+001)
To make this work, we need a formatting pattern that looks like:
[{0}] {1:0.0###} ({1:E8})
The square brackets, spaces and parenthesis are just part of the output, they have no meaning whilst formatting. Everything inside the curly brackets though will be replaced with a specific formatting of one of the values.
When using the Format component as shown above, the formatting pattern is just text data. The component knows that it is supposed to use the Format() function using the pattern text and whatever additional data is provided.
When you invoke the Format() method in an expression, you do need to make sure that the pattern is actually text:
So here the pattern needs to be encased in double quotes, otherwise it will be treated as code, rather than text.
You cannot use the formatting method in the internal expression of a number parameter, because this method returns text, whereas the number parameter is only capable of storing numbers. Any expression that you put into a number parameter had better return numbers as a result.…
e some questions.
I want to loop with a foreach loop trough a list of points do i have to make a list before or is it possible to use them coming in from a noed i set the access to list?
Also i dont understand why no plane is created. How do i need to feed the points in?
And why is c# expecting open parens in line 88 and 86?
Hope its not to much at once, probably i should try a few less steps to get the problems solved one by one, just hoped it would be easier and sometimes just a parentesis is missing or some format stuff, so maybe it is not so much i really cant say.
If anybody has the time and feels he wants to help it would be nice on the other hand i understand cause of the amount of chaotic questions.
Regards!…
wing exception will be thrown:
Message: Cannot import name minimum_edge_cut
Traceback:line 60, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\algorithms\__init__.py"line 21, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\generators\classic.py"line 5, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\generators\__init__.py"line 84, in <module>, "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\networkx\__init__.py"
I would inform you that I have also copied the Networkx library into "C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\IronPython\Lib\site-packages\" and have specified this directory in "Python Options->Files->Module Search Paths" so that Rhino/Grasshopper knows where to access this library.
Could you please help me how can I sort this out?
Any comment is highly appreciated.
Shayan…
answer further on Friday.
The "ghdoc" variable and rhinoscriptsyntaxThe ghdoc variable is provided by the component if you select it as "target".You might ask yourself: "why do we need it"?Its use comes from the very design of the established RhinoScript library. This library is imperative, which means it is build from a set of procedures or functions that act on various geometrical types. Additionally, there is one level of indirection: most of the time, the user does not work with the geometry itself in the variable, but rather with Guid of geometry that is present in a document. This is exactly what ghdoc is: it is the document that the RhinoScript library always implicitly targets with all AddSomething() calls (for example, AddLine()).
Based on this comment...RhinoScript use within GhPython may be less idealThat comment is from a previous version of this component that did not have the ghdoc yet.With the ghdoc variable, the standard Rhino document target of RhinoScript is replaced, therefore we can use Grasshopper while leaving the Rhino document unchanged. This saves uncountable Undo's, and makes it easy to structure ideas through the definition graph
...is the rhinoscriptsyntax target irrelevant if using solely RhinoCommon classesYes. If you create class instances (objects), you will need to create also your own collection objects to store them (mostly lists, trees). You can imagine the ghdoc as being an alternative to them, just that you do not access data by index (number), but by Guid. So you can use the RhinoScript or the RhinoCommon libraries independently or mix them. The RhinoScript implementation in Rhino is open-source and is all written in RhinoCommon. Also the ghdoc implementation is open-source, and is here.
RhinoScript and/or RhinoCommon objects which are not recognized as valid Grasshopper geometryYes, sure, Grasshopper handles only a portion of all available types. Basically, unhandled types are all the types that do not exists in the 'Params' tab. For example, there is no textdot and no leader, so on line 149 there is a throw statement and all TextDot calls (about line 350) are commented out. When/if Grasshopper one day will support these types, these calls will be implemented.
DataTreeHere is a small sample. However, I think that 80% of the times it is not necessary to program for DataTrees, as the logic itself can be applied per-list and Grasshopper handles list-iteration.
I hope this helps,
- Giulio_______________giulio@mcneel.comMcNeel Europe…
ger at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information.Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities.sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org
sg2012 take place at Rensselaer Polytechnic Institute, Troy, in upstate New York from 19-24 March 2012. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts, a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.…
t BBox will then be mapped relative to the UVW space of that box to the new target boxes.
Where your definition is slipping up is the data matching aspect of GH. You have two lists (that count). One list contains 100 items of target boxes and the other contains 2 items of geometry. GH defaults to the Longest List data matching
List A --> List B
Target Box A0 --> Cuboid
Target Box A1 --> Cylinder
Target Box A2 --> (Oops List B has run out of items. Now GH will repeat the last item = Cylinder)
Target Box A3 --> Cylinder
.....
Target Box J9 --> Cylinder
Solution
There are two approaches to rectify this the most logical would be to group the geometries into one object (What you had in mind with the bounding box) to do this use the Group Component on the Transform Tab > Utility Panel.
The other approach is far more common in GH mentality. Use the Graft, right click the G input of Morph and select Graft from the Context Menu. This places all of the items in the List on to separate branches. Creating a list of lists (although these new list only have one item). When GH now tries to data match them it will apply the whole of the first geometry list (Only the Cuboid) to all of the target boxes and all of the second list (Cylinder) to the target boxes again.
I hope this helps…
simple, there are many symetries in 3 main planes. So I used arcs rotated 45° from the main planes and I generate a pentagon which was mirrored and rotated many times.
At the end there are 24 pentagons and 8 hexagons so 32 faces, 54 points/vertex and 84 edges.
It could generate some others tessalation styles
…
te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
perienced with grasshopper, but so far I've managed to combine the following:
Giulio Piacentino's "Catenary arch from height" script
Pirouz Nourian's "Mobius" script (Obtained from a friend)
End Result:
Here's where I'm stuck: I want the mobius twist to revolve around the midpoint of the arch, but the script uses the input values to determine the endpoints, resulting in a weird sinuous shape when viewed from above. Also, the secondary end points (generated by the mobius script, determining the width of the surface) are generated by default along the z axis, resulting in an arch that only touches the "ground" at two points. I attempted to work around this issue by trying to force the zHeight parameter to correspond with the y axis (thus rotating the arch 90 degrees so it would lay "flat"), but the script interprets the third point as a value and not as an actual point to bisect. I thought this might be an issue with the C# component that I obtained from Giulio Piacentino's script, so I attempted to tinker around with the source code. Unfortunately, I'm not fluent in C# so I only managed to mess everything up (I've since recovered the code from the cache). Anybody got some ideas? -BC …