mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
string may contain any number of curly bracket pairs with non-negative integers in them:
"When {0} brings back {1} days and {2}"
The number inside the brackets refers to the data to insert in that location. In effect, {x} is a placeholder for actual data. The data inserted into a specific bracket pair is the data supplied in the latter part of the function. {0} refers to the first item, {1} to the second, {2} to the third and so on ad infinitum.
If I supply some data the entire expression may look like this:
Format("When {0} brings back {1} days and {2}", "Spring", "blue", "fair")
which will result in the string "When Spring brings back blue days and fair".
If the data you're inserting is a number (or a date) then you have additional formatting flags that you can use. These additional flags appear behind the placeholder index integer separated by a colon.
Format("Pi = {0:0.00} ({0:0.000000})", Pi)
The :0.00 means the number will be formatted using two digits. The other flag will enforce six digits, resulting in: "Pi = 3.14 (3.141593)"
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
Added by David Rutten at 3:00pm on February 3, 2013
n the inability to be a real-life member within a parametric workflow (same kind of issue with Evolute Tools Pro).
As regards strictly AEC matters the main problem with GH is Rhino itself (not feature/constrain driven, not a solid modeler, not AEC oriented by any means and not biased towards assembly/component modeling). Other than that and due to the known GH inability to handle/manage blocks/nested blocks at bake time ... well... I hardly can see how "to set up work flows between different tools such as ..."
I'll post soon 5 - rather "trivial" - AEC cases that are totally undoable (shop drawing level) with anything other than CATIA (or NX).
BTW: since international practices grow and grow in numbers these days (and individuals are dead) I can't see any realistic limitation for creating dedicated teams (kinda like Frank Gerhy did) that can easily deal with the "extremely heavy" nature of the beast.
BTW: this is a job ad (Project Architect role) from one of the biggest US AEC practices (rather a corporation, he he)
How things change these days ... don't you agree?
best, Peter
…
nette for years.. but without the nice GUI. It also allows combining constraints solving to be part of the DAG.
What is parameterics? Or parametric associative as GC has been described. Can't remember. History or procedural modeling? Even constraints solving or rules based solving all use parameters. Is it generative or merely parametric? I guess the difference is a parametric door doe not generate other parameteric doors?
BIM has opened the door to a more data centric view and manipulation of the design model. To old skoolers a wall is a linear construct that can be abstracted into parameters... beginning and end points of wall in plan + height and thickness. But start adding other stuff and need to ineteroperate with others and things get problematic.
Pretty soon, all those abstractions (parametric or otherwise) need to be structured and you end up talking about schemas etc to control the format of the parameters using rules as checks or constraints..so that your parameters can interface with parameters from others without causing data quality issues. It all gets very database thinking like.
So, I would say parametrics as GH does it is more free form and ad hoc and at some point if it goes BIM, the parametrics will be need to be (re)structured..
BIM is dependent on IFC development which is not very fast. IFC4 is only beginning to think about parametrics and 'Design Transfer'.
…
humacher (Zaha Hadid) and in fact most issues of AD (Architecture Design)
The Politics of Parametricism: Digital Technologies in Architecture by Matthew Poole, which is kind of a follow up
In my opinion learning Grasshopper will be enough and there is no need to learn Python to use it successfully. Best to have a deep understanding of Grasshopper and what it can do then to try and learn too many things at once. It will help you in applying the principles to other code and not the other way round (ie. learning the concepts first and then going into grasshopper). The best way to learn the concepts is by applying and trying them in a tool like Grasshopper.
I absolutely recommend that you visit a Grasshopper workshop, as that will teach you a lot more than Youtube videos. If you cant visit a workshop, then I recommend the rese.arch video series on Grasshopper. They're really indepth and go from simple introduction to very advanced. You should ideally buy and complete all of them.
Also there is of course Dynamo and its integration with Revit and BIM, which is something to look at, although Grasshopper covers all of that as well, at least with the integration with ArchiCad. Autodesk products are more common around the world though.
Be aware that a lot of the power of Grasshopper is also in the plugins you can get for it, like Kangaroo (physics simulation), Ladybug&Honeybee (environmental analysis), Karamba (finite element analysis), Hoopsnake or Anemone (looping) and many, many more. You can find them at food4rhino.com.
Good luck!…
y case. Here's the thing. There is this subject at my university where we are assigned a famous building and we need to recreate it in Rhino. We're given bonus points if we manage to code some interesting part of it in Grasshopper. So far so good, I'm doing pretty well with Rhino and by far I am happy with the results I've achieved with modelling the given building. Harbin Opera House by MAD is the building I'm trying to model. There is one particular surface:I've built this surface in Rhino and now I'm trying to map pyramids on it. Not only have the pyramids to be different in height, but their height has to be dependent on the curvature of the surface. I'm getting some results but it seems to be exactly the opposite of what I need. I want to have higher/spikier pyramids where my curvature analysis shows red/blue and lower/slopier pyramids where the analysis shows green colour.At the moment I'm not really sure how the code I have works, but it seems that the height of the pyramids is dependent on a distance from a point in space to the projection of the cap-point of a pyramid.Here're my Rhino and Grasshopper files:surface1.3dm
surface1.ghI'd be grateful if someone of you guys could handle my problem. I've got one more issue with this surface, but once I get a solution to the first 1 will let know what the second one is.Thanks in advance and keep well!…
te some implications and questions so I will go one by one:
"Now I would like to use a single VRay material as a template for creating multiple identical materials"I hope this will work, but as VRay does not expose any SDK, I would not guarantee any specific result.
"Now I need to add them to the document material table"This is done with a reference to a document instance, such as the one you get with the code doc.Materials (both in C# and Vb.Net).
"I'm not going to learn C# to modify his script"That's a pity, it would be nice to pass on this troublemaker to somebody else! :)Btw, C# and Vb.Net are very very similar. This script could be written in Vb.Net too.
"Reference to a non-shared member requires an object reference. (line 96)"This only means that you need to access the Materials property on an instance, not on the type (class) name. Change that line using what is written at point 2.
"Do I understand that the material has to be assigned to a particular object in order to enter the Material Table?"No it does not. But if you call the _Purge command it will be removed if it does not have an object that references it.
"Can I assign it to a Layer instead?"You do not need to. But this would be achieved with doc.Layers[whichLayer].RenderMaterialIndex = materialIndex; in C# or doc.Layers(whichLayer).RenderMaterialIndex = materialIndex in Vb.Net.
"Any ideas? A better way to do this?"If you found a way to bypass the VRay SDK not being there, this should work.
"Giulio's component has a type hint defined as a Material"It does not any longer. The hint was there in earlier versions of Grasshopper, but now the hint has disappeared. This is not so bad, and it is also the only way you would be able to use either a Material instance already or a string for a material name.
"How was that done?"Probably it was done in an older version of Grasshopper. But which version are you using?
"I can't figure out how to cast the input as a Rhino.DocObjects.Material, so you can see that I have cast it as a compatible type in the first 2 lines... is there a cleaner way?"That sounds like a good way actually. Be sure your component responds properly when something wrong is inputted, though.Dim mTemp As Rhino.DocObjects.Material = CType(M, Rhino.DocObjects.Material)in one line might also work. See msdn for more conversion operators and functions.
I hope this helps,
- Giulio_______________giulio@mcneel.com…
are invisible in the picture.
So what you see it's a common band that has lost all those characteristics of the original in order to protect the process.
We also did an "invisible setting" prototype which has built in Flexibility.
If you are in the jewelry industry you would know what I mean and it is close to a miracle.
It's a shame I can not share details and this is why I am planning my next major work on something 10 times more complex then this, at least.
It's will be for my own business and for the jewelry industry as well.
I hate to tease people and then not to be able to produce anything more than an image.
But I thought it would be better than nothing, at least for jeweler designers, so they can see that there are more and more users and that complexity it is not something to shy away from, and it's worth the time spent because the returns on production are far larger than for special orders and this is why GH is useful.
We can design a piece of jewelry usually in less then 1 hour, hence GH is not really worth the time.
But for production with so many variables (Finger sizes controlling most of the outcome together with stone sizes etc.) then GH it's a MUST!
I really appreciate everyone's comments and suspicions and I understand why.
99% of the people out there do not really understand the complexity of jewelry at the industrial level. It' s not just form but the post-production that's the killer.
This industry it's still an hybrid of technology and art with, and due to the lack of the old school pros, unfortunately, we face very lousy and unpredictable execution in the post production (after the casting process). This leaves you with a design process and intention that requires a lot of control over every possible variant of the object.
One wrong design aspect it's multiplied thousands of times at the benches (for every single piece) = bad profits!
It sound more serious that it is but very few companies are willing to do so (delivering good product vs low quality and this also happens because the consumer is not longer aware of the difference. So, who does keep quality, it's only because of integrity, third party QA or just pride).
This is way GH is invaluable. This is why that Def looks like out of proportion for that (Visual) simple band.
It is because there are dozens and dozens of variable effecting everything else. In fact it is not even complete as it is in order to cover everything but the most critical ones.
Sorry for the long replays. I am an instructor and a professional jeweler by trade since I was very young and I love to teach, so I overflow with explanations... and Components :)).
Next time it will be "in the open" as they say...…
uments:
1. You are targeting CATIA don't you? (not exactly tomorrow but ... soon) and/or SolidWorks (hello C# haven't we met before?).
2. You MUST deal with nested block instances instead of what you are trying to do right now (I'm talking about the real MERO things not abstract Lines and points). This is not doable with GH components I'm afraid (but it's rather easy with code).
3. You MUST deal with RDBMS in order to keep track with what's going on in your company per project per case per designer (who sells that bolt? what's his cat name? is he a reliable supplier? what I'm doing in life? ... that sort of "queries"). At this point: CATIA is 1% CAD things and 99% PLM stuff (Product Life cycle Management). We do want that since it's 21st century running don't we?.
I hear you: but these are 3 arguments ... indeed but ... hey who's counting? he he.
Method:
A. This def attached has a very simple C# that gets mesh Pts and makes a nice U/V style collection of points (DataTree in plain English).
B. Then we go to that umbrella sticks thingy: we can calculate anything (already the thing does "some") plus your collections of divided points (with the right way, he he) VS a given node: you said (Skype) that you want to calculate angles with these (from 2 to 6) in mind: obvious since you are doing real-life MERO things.
C. Then we could calculate the appropriate Planes for PlaneToPlane transformations: get a nested instance definition (the red things that you've showed to me yesterday) placed at 0,0,0 (Plane.WorldXY) and put in in every Plane collection related with every node (clash defection is an obvious must).
Case resolved, closed: what about that Vodka?
More in Skype
…