ey provide all the means to what I try to achieve.
What I need is to get a fast (as possible) evaluation of passive heat/solar gain from a certain facade. I know my building can cool to a certain degree (lets say 80 W/m2 - now lets forget other internal gains) and I want to be sure my facade is not letting excessive amounts of heat into the room/building. Normally I would make a full blown simulation to count my overheating hours and thereby evaluate my facade. To speed up the process, the idea is just to evaluate overheating hours in a faster way. So what I am thinking is that excessive amounts may estimated by counting high intensity irradiation patches in a critical sky-component or whatever such thing would be called that surpasses my sensible cooling load. My hope is that any facade visible to the sky-patches would very similar to the number of overheating hours if properly calibrated to a simulated model. However I have no idea right now, if this can be done.
Why do this? Speed, convenience, whole building thermal analyses.
@Chris and @Abraham The critical sky-component is made with LBs radiance component radiation and filtering the beam-components with highest effects from a yearly epw-file.
@Chris Conductive heat gains are also important especially if the facade is badly insulated, so the next step is to filter the outdoor temperature parallel with that critical sky-component and then do a static heat transfer analysis and combine that with the effect from direct sun influence. Again, no idea if it works.
Hope it makes sense. I a little embarrassed I drew you into this little experiment. This was not at all the point of the discussion. But now we are into it I like to know what you think. If it works its kinda neat, at least i think it is.
/K…
ers and researchers, programmers and artists, professionals and academics who come together for 4 days of intense collaboration, development, and design.
The sg2012 Workshop will be organised around Clusters. Clusters are hubs of expertise. They comprise of people, knowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The Workshop is made up of ten Clusters that respond in diverse ways to the sg2012 Challenge Material Intensities.
Applicants to the sg2012 Workshop will select their preferred cluster from the following:
Beyond Mechanics
Micro Synergetics
Composite Territories
Ceramics 2.0
Material Conflicts
Transgranular Perspiration
Reactive Acoustic Environments
Form Follows Flow
Bioresponsive Building Envelopes
Gridshell Digital Tectonics
More information about the Workshop and Clusters can be found here:
http://smartgeometry.org/index.php?option=com_content&view=article&id=116&Itemid=131
The application process will close on January 15th, 2012.
Full Fee $1500
Reduced Fee $750
Scholarship Fee $350
Fees include attendance to both the workshop and conference from March 19th-24th.
Reduced Fee and Scholarships are available only for Academics, Students and Young Practitioners, and are awarded during a competitive peer review process.
sg2012 takes place from 19-24 March 2012 at EMPAC (http://empac.rpi.edu/) and is hosted by Rensselaer Polytechnic Institute in Troy, upstate New York USA. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts: a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.
sg2012 Challenge Material Intensities
Simulation, Energy, Environment
Imagine the design space of architecture was no longer at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information. Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities. sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org
Follow us on Twitter at http://twitter.com/smartgeometry…
Added by Shane Burger at 12:29pm on December 13, 2011
try to get the output. In this case the output needs to be set before requesting for it. I am doing it with this call:
ret = gsaobj.Output_Init_Arr(1,"Global","A1",14003001,3)
In API help the call is documented like this:
short Output_Init_Arr (long iFlags, string sAxis, string sCase, enum ResHeader header, long num1dpos)
so this call has 5 arguments (long, string, string, long, long) (the enums are defined as longs)
This call works, because when I print the ret, i get 0 that is "succeded" so everything works so far.
Then I request the output with the following:
results = []
ret = gsaobj.Output_Extract_Arr(10,results,numcomponents)
In API help the call is documented like this:
short Output_Extract_Arr(long iRef, SAFEARRAY(struct GsaResults)*arrayResults, long* numComponents)
I am getting the error "
Runtime error (ArgumentException): Could not convert argument 1 for call to Output_Extract_Arr."
So it seems that is not accepting 10 as a long in the beginning (assuming that argument 1 is the first). I already tried passing a variable as long, using long(10) there, nothing works.
Furthermore I don't know if the other two variables are correct like that. I come from VBA where I need to declare everything but AFAIK python is more permissive in this sense. "results" should be a dynamic array of objects and "numcomponents" a long.
Any help would be appreciated!
Thanks! :)
…
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
thought that architect's love for drawing comes from the necessity of translate abstract ideas into built 3D reality, and the technology behind that 2D representation has not evolve so much until some decades ago. Our teachers come from that times: times when computers try to find their place in the reality representation world. If you try to imagine that people that have always drawn with pencils adapting to this new tools...some become fan of new methods, other just keep the old fashion workflow (like Andrew said in the article, Schumacher VS Graves)
We've bear (at least Andrew and me :P) in 80's with first video games, computers (I still remember my old x286 with 1Mb RAM and 20Mb of HD and that MS-DOS interface)...New technology was natural for us...But there is a big difference between traditional drawing and new computer aided tools: the learning curve. To draw you only need to take a pen and put over a paper (that interface is understood by children easily) , but traditional computational tools (new touch interfaces are out of this group) are based in a complex logic and environment that is not easy to understand for some people.
In the workshops I'm teaching in, I try to put all that tools (new and old one) in my students hands and motivate them to mix and use them together (Andrew knows a little bit about that :P). Why not to make a lines sketch with GH and then print it and render with some markers?; the last step could be scan the result and enhance it in Photoshop adding textures, vegetation, some background...There are no rules, only a bunch of tools to explore and use to develop your ideas, evolve and finally represent them.
I bet to the touch interfaces (with some augmented reality sauce) like that one that will be able to blend both worlds, analog and digital, offering that fluidity and natural interaction that Grave miss in digital tools. And our generation attached to this "not natural" interfaces will need to change its mind and adapt to that new and amazing interface that our children will love.
Only to complete:
<iframe width="560" height="315" src="http://www.youtube.com/embed/aXV-yaFmQNk" frameborder="0" allowfullscreen></iframe>…
Added by Ángel Linares at 5:40pm on September 10, 2012
e volume. The yellow line above.
This volume, green on the above image
So with this there was an intersection with the Brep volume of the chair and the lattice.
After that I used cocoon. Here the parameters I used for the Brep and curve. So The Brep was offsetted.
The model is 80 unit height and cell size is 0.2 so roughly there are 400 divisions in Z. If cubic it will give 6.4 millions of cells. To my point of view it is important to choose well the cell size in order to have not hundred of million of cells. Here 6 millions was usable. The general thing with Cocoon is alwas to test it on small objects first.
A close view of mesh. Edge length is 0.1 unit. There are 6 millions of triangles.
…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
r "virtual partitions" as follows:
What I mean "air walls" here, is derived from the description of the E+ documentation with the header of "Air wall, Open air connection between zones". (Page 17, http://apps1.eere.energy.gov/buildings/energyplus/pdfs/tips_and_tricks_using_energyplus.pdf)
As I understand, the term "air wall" used in E+ here refers to a description of something like "boundary condition" between adjacent interzone heat transfer surfaces, but not a kind of "construction or material" (like air space resistance or air gaps within a wall/double glazing window).
The main purpose of introducing the "air wall", is to simulate or approximate the airflow/convection/natural ventilation effect between multiple thermal zones which are connected by a large opening.
In my previous tests, using HBzones and GB, I managed to create the gbXML file which can be successfully imported to DB (without assigning any constructions within HB). And the adjacency condition can be recognized automatically by DB, even when I did not use the "Solve adjacencies" component in HB - shared surfaces between multiple thermal zones are recognized automatically by BD as "internal - partition"(which are standard partitions, but not virtual partitions).
In order to create/approximate "virtual partition", I need to manually draw a "hole" in the standard partition surface (fig.1&2). Again, the reason why we want to use "virtual partitions"(or "air wall") is that it allows airflow between multiple thermal zones which are connected by large openings and we could get different temperature of the each subdivided thermal zone which compose a large thermal zone.
My question is, if there is a possible way to simulate/approximate this kind of "virtual partitions"(or "air wall") in HBzones or in GB? If so, I would like to test if DB recognizes it or not. Actually, we expect that there is no need to involve any manual operations (like drawing a "hole" in the standard partition surface) in DB, due to an automatic optimization loop.
Thank you!
Best,
Ding
fig.1
fig.2
…
We invite participants of the eCAADe 2015 conference to propose workshops on their current research. The workshops will be held on the 14th an the 15th of September…