re is my problem... I need to arrange Boxes in the most efficient way within boundaries of object and follow the following constraints.
The Goal: To fit 125 boxes in the most efficient way inside the total area. Starting Variables:
(1) 40% of the Boxes need to be between 60 and 85MSQ. (2) 40% of the boxes need to be between 86 and 110MSQ.
(3) 20% of the boxes need to be between 111 and 125mSQ. The breakdown doesn’t have to be exact to give the script some flexibility. Meaning you can have 41% +39% +20% = 100%.
Constraints:
1. A total MAXIMUM area of approximately 1600M per layer.
2. A maximum of 8 layers for a total of 12,800M per layer. Optimization can make as little or as many as 8 layers vertical to accommodate all boxes. So if script can achieve with 3 levels great. If needed all 8 levels, that's fine too. However, pay attention to next constraint (#3).
3. Approximately 15% of that space on each layer is off limits. (internal area) (blue area in example script) and the shape of the boundary cannot be modified to accommodate box design resulting in jagged lines for the internal area.
4. All generated squares/rectangles must have at least 3m touching an outside border (The Green lines).
5. All boxes must also be touching minimum 1M of border of the blue line.
6. If the boxes generated go outside the green boundary, they must be fillet to maintain the straight lines of the green boundaries.
7. Get as many of the boxes as possible a view towards the dots.
Could any one provide me a method or a way to start, if there are any useful links, please share with me. Thank you!
…
ce issue with Rhino and shouldn't make an issue with EnergyPlus but just to have cleaner geometries, I untrimmed base surfaces so zones are closed brep now.
I also noticed that when you are adding multiple openings to a surface, the surface doesn't show-up in the output of createHBZoneFromHBSurfaces. The surfaces are there though and show up once you explode the zone! Again should be a tolerance issue for join. I need to take a closer look to both of these.
Also, in a number of the zones you had wall surfaces connected to createZoneFromHBSurfaces both before and after adding glazing. I removed parent surfaces so you don't end up having duplicate surfaces.
Back to adjacency which was your question, the issue happens since you have couple of zones with the same name so component was assuming them to be the same zone so it wouldn't solve the adjacency (Yes! it shouldn't. That was a bug which is fixed now). I changed the names and now it should find the surfaces that you are looking for.
Moreover, once you solve the adjacency, next solveAdjacency won't overwrite the BC unless you set remCurrentAdj to True.
Mostapha…
akes the linear regression of the Schroeder integral over 30 dB worth of decay. Whether it is T-15 or T-30, they all seek to estimate the RT, which is always always the time it takes for sound to decay 60 decibels.
The website has benchmarks, for your reference. You can find them under the 'Pachyderm' drop down menu, under 'Benchmarks'.
Your model may well require millions of rays to be accurate. It sounds like a very large space. I'm sorry if that is an unpleasant answer. Sometimes it does help to have a computer with more cores to help with this. I have gotten up to 90% processor usage on a 12 core machine before.
Arthur…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…
e design intent, but this is what Inventor is good at. The way it packages bits of 'scripted' components into 'little models' that can be stored and re-assembled is central to MCAD working. The big speed/usability advantage for the user that apps like Inventor provide is: All the defining, handling, assembling/gluing to the adjacent components is done as part of its 'main loop' with all the hooks that can cater to user interaction, ie traditional modeling. I guess one example of this is how Revit handles the placing of Adptive Components. AC's (and GC's GFT's) is pretty much a copy of Catia PowerCopies (which are probably a copy of something else). When placed, the AC's input points are transferred one by one to the cursor for the user to interactively place them. When copied, it tries to keep the same inputs, while changing its position/parameters. This saves a lot of time/nerves.
Catia, OTOH, is still thinking in terms of scripting and looks for matching property names, or uses a script to match strings, that nearly match. Sure, sometimes, this is unavoidable, but I think that there is a lot of room for incorporating a more traditional 'event-based' interface or 'wrapper' around the scripted components.So much is scripted in GH, maybe it should also be possible to script/define/constrain/assist the placement/gluing of the results? An example of this is how Modo's Toolpipe works. The Toolpipe is a simple tool to record the active selection, snap/alignment/working plane, tool settings for re-use. I could see the user benefitting if the GH component was aware of the app's 'state' when placing/assembling components.
Also, a lot of simple things could be 'modeled' first and translated into scripted form if GH could read the active workplane, snap settings etc. Draw first, convert to hand-scripted script later?Columns: Looking at your description, the vertical elements were modeled in Rhino, and referenced in GH? 5hrs to get some points on the lines? And using Excel as the design table? I think this could be 'drawn' and constrained in Inventor in a lot less time. I know the GH model would have a lot of flexibility, but in this case, what can you do with it that wasn't provided by an Inventor model? The other thing that MCAD apps like Inventor have, is the 'structured' interface that offers up all that setting out information like the coordinate systems, work planes, parameters etc in a concise fashion in the 'history tree'. This will translate into user speed. GH's canvas is a bit more freeform. I suppose the info is all there and linked, so a bit of re-jigging is easy. Also, see how T-Flex can even embed sliders and other parameter input boxes into the model itself. Pretty handy/fast to understand, which also means more speed.Would love to understand what you did by sketching.Starting point: I think we are talking across purposes. AFAIK, the solving sequence of GH's scripted components is fixed. It won't do circular dependencies... without a fight. The inter-component dependencies not 'managed' like constraints solvers do for MCAD apps.
With a manager, If one of the beams is connected to the column, changes in either component would trigger changes in the other to preserve the connection, regardless of the creation history. In GH, the dependencies are fixed, and the connection points would probably need to be defined independently, and placed 'upstream' of both elements. This makes editing laborious... but DAG processing is a lot quicker than constraints solving. Switching direction seems to be possible in the animation world. Maya etc have IK/FK switching, which seems to be able to reverse the solving direction on demand. Not sure how or whether the rig is scripted.…
. From the Thermal Comfort Indices component, Comfort Index 11 (TCI-11):MRT = f(Ta, Tground, Rprim, e)
with:- Ta = DryBulbTemperature coming from ImportEPW component- Tground = f(Ta, N) where N comes from totalSkyCover input. Tground influences the long-wave radiation emitted by the ground in the MRT calculation.- Rprim defined as solar radiation absorbed by nude man = f(Kglob, hS1, ac)- ac is the clothingAlbedo in % (bodyCharacteristics input)- I can't find any definition in the code of Kglob and hS1. Could you tell me please what are those values referencered to? --> probably the globalHorizontalRadiation but how?- e = vapour pressure calculated from Ta and Relative Humidity input
Do you agree that in this case the MRT does not depend on these inputs: location, meanRadiantTemperature, dewPointTemperature and wind speed?It does not depend neither on the other bodyCharacteristics like bodyPosture, age, sex, met, activityDuration...?
MRT calculated by the TCI-11 method is the mean radiant temperature of a vector pointing vertically with a sky view factor of 100%?For ParisOrly epw,
2. From the SolarAdjustedTemperature component (that seems to be more used for the UTCI calculation examples on Hydra compared to TCI-11).
In contrast to the TCI-11, this component distinguishes diffuse and direct radiation and contextualizes the calculation thanks to _ContextShading input, right? It can also be applied to a mannequin thanks to the CumSkyMatrix and thus evaluate the dishomogeneity of radiation exposure.This component seems not to consider the influence of vapour pressure on the result --> is it then more precise to put the MRT output (from the TCI) as an input of meanRadTemperature for SolarAdjustedTemperature?The default groundReflectivity is set to 0.25 --> is GroundReflectivity taken into account in the Tground or MRT calculation in the TCI component? If yes, what is the hypothesised groundReflectivity?The default clothing albedo of 37% (TCI-11 bodyCharacteristics) corresponds to Clothing Absorptivity of 63%?
If the CumSkyMatrix input is not supplied, I get 9 results for the mannequin --> where are those points/results coming from?
If the CumSkyMatrix input is supplied,I suppose the calculation of the 482 results correspond to a calculation method similar to the radiation analysis component that is averaged over the analysis period. Right?But I don't understand why the mannequin is composed of 481 faces and meshFaceResult gives 482 results.
Finally, what is the link between the MESH results, the solarAdjustedMRT and the Effective Radiant field ? Is there a paper to have a detailed explanation of the method?
3. Here are some results for the ParisOrly energyplus weather data. You can find here attached the grasshopper definition.There is no shading in this simulation and the result coming from the ThermalComfort indices for MRT is very different compared to the solar adjusted MRT.Why such a big difference and which of the result should be plugged into the UTCI calculation component?
Results for ParisOrly.epwM,D,H:1,1,12
Ta : 6.5°Crh: 100%globalHorizontalRadiation: 54 Wh/m2totalSkyCover: 10MRT (TCI-11): 1.2°C
_CumSkyMtxOrDirNormRad = directNormalRadiation : 0 Wh/m2diffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.64°CMRTDelta: 4.14°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.47°CMRTDelta: 3.97°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = MRT (TCI-11)solarAdjustedMRT: 5.17°CMRTDelta: 3.97°C
Thanks a lot for your helpRegards,
Aymeric
…
Salimzadeh
Assistant: Saeede Kalantari a Fabrication Project for “Structural Systems” BA Course;
Participants: Maryam Ahmadi, Amir Ansaripour, Kimia Bagheri, Mohammad Hassan Habibi, Mohammad Mehdi Zamani, Sam Sabzevari, Zeynab Seyed Zehtab, Mohammad Mehdi Shahroudi, Niloofar Taheri, Masoumeh Abedini, Pedram Feyzi, Asma Karamouz, Kimia Karbalayi, Hamed Kamalzadeh, Fateme Kianinejhad, Maryam Mohammaddoust, Faeze Motamedian, Romina Mehrbod, Sara Naderi, Yasaman Nejati, Kimia Nourinejhad, Morteza Vaziri, Mehragin Baghi, Sana Motallem, Helpers: Milad Amiri, Soroush Raesi, Mahla Behrouz, Alireza Sheykhlar, Shadi Khaleghi, Mohaddese Taheri, Alireza Mohammadi, Mehrnoush Kia
Photography: Sara Ahmadi, Hasan Habibi
Video production: Shayan Khalilbeigi
Special Thanks To Dr. K. Taghizadeh, Dr. H. Mazaherian, Dr. Y. Eslami and Mr.Aliari
With Support Of: Center Of Excellency In Architecture Technology – CEAT - , Collage of Fine Arts University of #Tehran, ‘Art And 4th Dimension’ Symposium, Iran #Fablab and #Fologram
Rhino/Grasshopper and C# Definitions of form-Finding and Member-generation :
http://bit.ly/2RUKc5i…
nputs to run (please refer to the image)
Currently, here is how I set the data:
protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { //Create default size
double defaultBaySize = 0; pManager.AddTextParameter("LotLib", "Llib", "Lot Library", GH_ParamAccess.tree); pManager.AddCurveParameter("BoundaryCrv", "BC", "Boundary Input", GH_ParamAccess.list); pManager.AddIntegerParameter("Direction", "D", "Direction of gridLines", GH_ParamAccess.item, 0); pManager.AddNumberParameter("CCsize", "S", "Distance from column to column", GH_ParamAccess.item, defaultBaySize); pManager.AddCurveParameter("GridCrv", "GC", "Take in curves input for gridlines", GH_ParamAccess.list);
}
protected override void SolveInstance(IGH_DataAccess DA) {/* Setup */ GH_Structure<GH_String> LotLib = new GH_Structure<GH_String>(); DA.GetDataTree(0, out LotLib); List<Curve> BoundaryCrv = new List<Curve>(); if(!DA.GetDataList(1, BoundaryCrv)) { return; } int Direction = 0; DA.GetData(2, ref Direction); double CCsize = 0; DA.GetData(3, ref CCsize);
List<Curve> GridCrvs = new List<Curve>(); DA.GetDataList(4, GridCrvs); if (!DA.GetDataList(4, GridCrvs)) { return; }}
Is there a way can set data in the way if the component does not receive inputs for BoundaryCrv but only GridCrvs, the BoundaryCrv List will empty.
Thank you very much …
oCommonSDK, I modified a working C# component that does something similar (ReduceMesh, written by Andrew Heumann). Both scripts are attached.
Aside from changing the component name and eliminating the P parameter, I made two modifications to the script:1) changed line 87 from private void RunScript(Mesh M, double P, ref object A) to: private void RunScript(Mesh M, ref object A)2) changed line 93 from: Rhino.RhinoApp.RunScript("_-ReduceMesh _ReductionPercentage " + Convert.ToString(P) + " _Enter", false); to: Rhino.RhinoApp.RunScript("_-MatchMeshEdge " + " _Enter", false);When I run the ReduceMesh component, the mesh object I feed it gets baked, the ReduceMesh command is run, the temporary object is deleted, and the reduced mesh result is returned. (Thanks, Andrew).When I run the MatchMeshEdge component, the mesh object I feed it is baked, the MatchMeshEdge command is run, but the temporary object is not deleted and no result is returned. The runtime error reads: "Sequence contains no elements (line 0)". I have a feeling that the command line string I am handing to RunScript is incomplete. When I enter it manually on the Rhino command line I see that it wants a mesh and three parameters. Of course I can hit Enter to accept the default values, but when you invoke a command through RunScript do you have to supply all parameters regardless? Also, where would I find details on the argument types that the command wants? For example, the last parameter reads "RatchetMode=On" or "RatchetMode=Off". How do I know if the type is Bool or the literal string "On" or "Off"?I am a complete novice at this so any help you can provide would be greatly appreciated! …