being driven by the wii nunchuck... But, here's my issue. I tried it first by having the output from the listener be a 6-digit number... so, I'm using the (CInt(Val(StoredValue))) command and it's writing out 181130... and I can easily split it up selecting the Left(x,3) or Right(x,3)... I first rant that number through a Format("{0:000000}",x) so that even if one of the accx or accy numbers were a 2-digit number (so my overall number would only have 5-digits)... with this Format function... I'm always assured a 6-digit number. And this method works... except...
If the first group of numbers coming in only has 2-digits... So, lets say the accelerometer read out of the first one (accx) is 89. Let's say the accy read out is 119. So, when I run this through the Format function to make it have at least 6 digits, my number now reads 011989. So, if I were to take the first three numbers on the right, my read out would be 989... which is much higher than my expected (60-180 range that is really coming over the Serial Port)... So, I'm back to where I started... in that I need to figure out a better way to split up the data.
Which brings me to your method. I tried it as well... in fact, I added a comma in the serial readout, so the string coming out of the listener reads 89,119. So, I can use your trick to go look for a delimeter and then read to the left and right a certain number of digits... The problem I still have is that the data going into the function is a string, and thus even if I split the 3 digits to the right of the comma out (so, my output says 119)... it's still a string, and my number parameter is still red. In your picture above, was your original 181 130 a number or a string? My guess is that it was understood as a number, because your number parameters at the end are accepting the value. But, in my case... I'm still stuck with the inability to convert a string to a number... Does this make sense? And are their any other workarounds?…
Added by Andy Payne at 9:42am on September 3, 2009
m
-Area of blue line: min. 80% of the rectangel a x b
-Max. hight h of the top point: h,max = a
-Min. Volume between rectangel a x b and membrane: 500 m3
Can anyone help me?…
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
izes like 0.6m, 0.8m, 0.9m and 1.2m are the most "common": In cases where mechanical floors are a must (hospitals for instance) a 2.4/2.4 is quite handy (habitable/mechanical per floor). You can try 1.8/2.7 as well (floor/habitable) since 1.8 floor thickness can host HVAC and some decent W truss size. Also 1.6/2.4 (floor/habitable) is used in small buildings. NOTE: see next.
3. Don't forget to include corrugated metal height + concrete screed height + raised floors height: for the latter, say, something like 0.3m (modules + adjustable mounts + free space for electric stuff [boxes etc]).
4. As regards exteriors, Laurent Buzon is a close friend of mine. Contact him directly on my behalf:
http://www.buzonuk.com/
http://www.google.gr/url?sa=t&rct=j&q=&esrc=s&sourc...
5. LBS Structural ability and "monolithic" floor behavior (humans don't like vibrating habitable spaces) ARE not the same animal.…
ybee_EnergyPlus Window Shade Generator" component.
3. SolveAdj component has the input to set BC for interior surfaces.
If you want to set them to adiabatic then you can use setToAdiabatic components.
4. For natural ventilation Chris has provided extensive answers including this one.
If the component doesn't work then you need to download the files manually from github and replace the userObjects with the old ones. You have to do it separately for Ladybug and Honeybee which can be painful. Is there anyway to change the firewall settings?
…
i have to rely completely in passive means.
To speed things i'm calculating comfort for Extreme hot/cold week, thinking maybe on typical weeks instead.
The cool week is kind of "right", but the hot (extreme) is giving all night hours 100% comfort. Knowing the climate, there is no way this can be the case. Some of the settings with the european standards give sometimes the right tendency, but still, compared to ASHRAE's the average of % percentage is too high.
Also my assumptions for flexibility of use/clothing/etc is the maximal. I mean, no constrains on this respect ("let's be passive as much as we can").
So right now i have no specific questions, but rather your advice, if any: "What you would do ...?? (I don't like these kind of questions, sorry).
A request, yes, if it is possible to output the set temperature for each hour. For instance, when you give the degFromTargetMtx i'll like to know this target. This is for control, and i think this is important for better understanding this black box.
Any other insights you may have, just shoot.
Not related to the discussion, but if you happened to check the model, we are simulating 2 apartments in the building. The northern one is only one thermal zone. The southern is divided in rooms. I wanted to see how much difference e get between both ways. And there is. No doubt the more detailed modeling looks more reliable. Also if you have some points here, shoot again.
BTW humidity, look at page 32-33 in the AC book. Nicol is clear on the "real" influence of the humidity, arguing it is mostly psychological than real.
Thanks again, and to you too Mauricio.
-A.…
till quite rough.
I went through your attached log but it seems to be a successful run, perhaps the error log wasn't attached. In any case, I believe we have identified this issue. The goal of the update fvSchemes component was to apply schemes to finalized meshes in an automatic way. While this is useful for new users it is also a dangerous thing to do in CFD studies.
The component works by relating mesh quality to the mesh non-orthogonality, which the checkMesh component reports. While non-orthogonality is one of the important criteria of mesh quality it does present difficulties on some kind of meshes, especially like the simple cases that BF has been meshing so far.
The example case of simple box buildings in a wind tunnel above for instance will appear as a good quality case for even the lowest of cell-count meshes, simply because it is an orthogonal geometry. That means that checkMesh will probably report low values (imagine an empty blockMesh of 10m blocks has a non-orthogonality of 0) which in turn means that higher order schemes might be paired with actually low quality meshes. This I believe is causing problems.
I posted a possible solution to this here https://github.com/mostaphaRoudsari/Butterfly/issues/57. The idea is that Buttefly provides additional options to the users, enabling them to choose between first-order (faster, more robust, but lower quality schemes) and second-order (slower, less robust, but more accurate) schemes depending on mesh quality, stage of assessment, etc. In cases like the above mesh quality a first-order scheme might provide a better option. To test this I am attaching an fvSchemes file you can use by replacing yours in the /system folder of the case.
As a note however, I would like to stress there is so much that a tool like Butterfly can provide in this area. Meshing is a quite complicated and demanding part of the process, involving a lot of trial and error. Sometimes the problem is just the mesh and not the solution options (GIGO stands true in CFD as well). It does however get easier with experience. The safe advice is the simplest one: when changing solution options doesn't help, refine mesh and run again.
Kind regards,
Theodore.…
se enseñan los principios de modelado básico y orgánico en Rhinoceros. En Grasshopper se estudian los principios de Parametrización, panelización y análisis en Grasshopper, así como el proceso de manufactura digital para maquinaria de corte Láser y CNC.
UN solo pago anticipado $5,000.00
Pagos diferidos $5,500.00*
*reserva tu lugar con el 50%
De lunes a viernes de 10 am a 18 pm
Del 23 al 27 de julio de 2012
DURACION: 40 HORAS
SESIONES: 5 DE 8 HORAS
o info@dimensiontallerdigital.com
informes al 55 (50 16 0634) con Mayri Gallegos (o al cel. 55 28 85 24 73)
Incluye material para corte digital.…
Refinement component at first, possibly using MeshMachine instead which is slow but actually gives many fewer triangles and adaptive meshing for tight curves too. Neither are easy to adjust on a deadline!
Then you have to sneak up on workable settings, using only a few lines, or Grasshopper will freeze perhaps indefinitely for 200 lines with extreme settings, especially the CS (Cube Size) setting that can blow up into a huge number if your scale is big.
Cocoon gives lots of nearly flat split quad faces so I quadrangulated those for fun:
Or MeshMachine can refine the mesh to make it efficient:
Whereas the Cocoon Refine component will merely return an equally fine mesh with more equilateral triangles but no serious remeshing to rid so many tiny triangles where they are not needed? Actually, it does seem to remesh also:
David said he used some of Daniel's MeshMachine code in there.…