he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
s levels of detail by subdividing a 6 sided cube mesh and projecting its vertices according to a referenced height map. This is one of the standard conventions for building full sizes planets. At the lowest level (0) the mesh planet is made of 6 pieces(each 32x32 resolution). The next level down (1) is made of 24 pieces... 6 divided by 4 = 24. Level (2) is 96 quads etc etc. The script will generate each quad at its sub-division level and compare edge vertices to neighboring quads. It will then make sure any shared vertices are in fact at the same projected vector. This ensures a planet quad with edge vertices that match.
The problems comes in texturing each quad.
If I build the quad as a nurb surface from points I can place the texture easily because each surface UV maps squarely to my texture map (which is also square).
If I build the quad as a mesh I cannot just apply the square texture to the mesh UVs. This is because when you unwrap the UVs from a mesh they will not unwrap like a nurb surface's UVs. Therefore to get the correct mapping I would have to manipulate each UV back to an evenly aligned array (which is 1024 points in a 32x32 resolution UV). Maya and blender have 'relax uv' and 'align UV' functions but they don't do the trick and manual corrections are out of the question. So why not skip the mesh method and use the nurb method?
I did this and there is a trade off. The nurb will accept the material texture I want with no other work on my end but when I export the object as an .obj rhino creates its own mesh to describe the nurb(with various unsatisfactory setting options). This works great up to a point because at some level the interpreted mesh will have vertices that do no match at the edges, ie .. creating visible seams in the mesh. The picture below is the nearly seamless planet at LOD(1) made of 24 quads, each with 32x32 vertice resolution and a 512x512 jpg texture running in Unity3d 5. It works but at close level there are seams. This will be resolved simply by having the next LOD(x) instantiate before getting close enough to see the seam but at core nerd level I want the seamless mesh.
So, I can make the seamless mesh but I can not realistically texture map it. I can also make the nurb surface from points and texture it at the expense of the edge vertices matching. I am at the split in the road but I want to have my cake and eat it too. Thoughts, comments, trolls...?
Thanks for reading =)
Footnote: For you pros I am not using seamless noise across the map I am using grasshopper to sew up my otherwise non perfect edges.
Other programs in the pipeline:
-WorldMachine 2
-Wilbur
-Photoshop
-Unity3d…
ect + Geco
TUTORS:
Arturo Tedeschi (Authorized Rhino Trainer) + Maurizio Arturo Degni
Il workshop avanzato ECOLOGIC PATTERNS affronta l’impiego di strategie parametriche all’interno del processo progettuale, approfondendo l’utilizzo di Grasshopper in sinergia con plug-in, software di analisi ambientale e simulazione fisica. Obiettivo fondamentale è la generazione della forma come risultato di tecniche di form-finding e di input ambientali (solari, termici e acustici). Verranno acquisiti nuovi strumenti operativi e di simulazione al fine di costruire modelli parametrici ottimizzati in grado di adattarsi a diverse condizioni di contesto.
MORE INFO…
; GH, this one came out and rhinoceros is disappear...like this
it said " Rhinoceros5's working is stopped. because some problems occured so Rhinoceros5 can't work correctly no longer " then I have no choice but terminate Rhinoceros.
There are some discussion about RhinoIronPython installing numpy though, no one has same problem like me. so Please somebody tell me!!
and one more question...just in case, I tried to install numpy into ironPython2.7
C:\Program Files (x86)\IronPython 2.7>ipy "C:\Program Files (x86)\IronPython 2.7\ironpkg-1.0.0..py" --installBootstrapping: c:\users\owner\appdata\local\temp\tmp2nand1\ironpkg-1.0.0-1.egg 118 KB [.................................................................]
C:\Program Files (x86)\IronPython 2.7>ironpkg -hUsage: ironpkg-script.py [options] [name] [version]
.
.
.
C:\Program Files (x86)\IronPython 2.7>ironpkg scipyWrote configuration file: C:\Users\owner\.ironpkg=============================================================================Traceback (most recent call last): File "C:\Program Files (x86)\IronPython 2.7\ironpkg-script.py", line 10, in <module> File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\main.py", line 364, in main File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 27, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\indexed_repo\chain.py", line 67, in add_repo File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 92, in write_data_from_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 435, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 654, in http_error_302 File "C:\Program Files (x86)\IronPython 2.7\Lib\httplib.py", line 1261, in __init__ File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.py", line 73, in open_url File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 154, in urlopen File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 547, in http_response File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 467, in error File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 429, in open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 446, in _open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 407, in _call_chain File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1240, in https_open File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 1167, in do_openAttributeError: 'module' object has no attribute '_create_default_https_context'
C:\Program Files (x86)\IronPython 2.7>
how can I deal with this error?…
ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
ort and export from the images below and also from the HELP file of DB in attachments (Page 71: Importing Geometric Data; Page 78-80: Import 3 - D CAD Data). In their HELP file, they mention about "import geometric data".
However, regarding the input of schedules, loads, constructions and etc., DB normally uses "Component " and "Template" (Page 29: Templates And Components; Page 591: Templates; Page 533: Components). "Templates" are databases of typical generic data, including Activity templates, Construction templates, Glazing templates, Facade templates, HVAC templates, Location Templates, and etc. "Component " are databases of individual data items (e.g. a construction type, material, window pane).
Both "Component " and "Template" are allowed to be imported and exported by using "Import / Export library data" command (.ddf format - DB Database File; Page 734: Import Components/Templates, Export Components/Templates). DB also allows us to build up our own libraries of templates and components (Page 731: Library Management; Page 733: Template Library Management).
In order to import both geometric information and other information related to schedules, loads, constructions and etc. from GH to BD, we supposed the following two ways:
1. GH(HB+GB) --> gbXML (both geometric and "Component " and "Template" information) --> DB
This is the way we most prefer. We did see information related to schedules, loads, constructions encoded in the gbXML file generated by GB, but still do not know the reason why DB did not take this information (I also mentioned this in Q6 within the gh file). We assume this might because the gbXML file we create encodes the schedules based on a different template / schema than the one DB expects. We also post this question to the DB forum for help.
(http://www.designbuilder.co.uk/component/option,com_forum/Itemid,25/page,viewtopic/p,13755/#13755)
2. GH(HB+GB) --> gbXML (geometric information only) + .ddf ("Component " and "Template" information only) --> DB
If the first way doesn't work and DB only takes geometric information from the gbXML, then we might think of the other way - generating the .ddf files from GH(HB+GB) to pass the schedule, load and construction information to DB.
I was wondering if it is feasible for HB and GB to have this function? And what is your suggestion to achieve this?
In addition, we notice that DB can export XML files (not gbXML), so we are trying to figure out if DB also accepts / reads the XML file. If so, we might be able to convert the gbXML (with both geometric and schedule information) to XML. What do you think about that?
Thank you again for all your help!
Best,
Ding
DB import
DB export
Template libraries
Component libraries
…
y using the Honeybee_Update Honeybee component.
The video below (best viewed in full-screen mode) provides an idea of what these components are capable of being used for:
The video below shows how these components can be used in an existing Honeybee project (for additional links please open this video in youtube):
I have uploaded two examples as Hydra files that show how these components can be used for grid-point and image-based simulations:
Example1 : Grid Point Calculations
Example2: Image based simulation
Finally, a more esoteric application is demonstrated in this video:
These components are still in the beta-testing stage. Some of the limitations of the components are:
1. Only Type C photometry IES files are supported at present.
2. Rhino is likely to get sluggish if there are too many luminaires (i.e. light fixtures) present in a scene.
3. Due to the spectral limitations of the ray-tracing software (RADIANCE), simulations involving color mixing might not be physically realizable.
Additional details about photometric and spectral calculations are probably an overkill for this forum. However, I'd be glad to answer any related questions. Please report any bugs or request new features either on this forum or on Github.
Mostapha, Leland Curtis, Reinhardt Swart and Dr. Richard Mistrick provided valuable inputs during the development of these components.
Thanks,
Sarith
Update 16th January 2017:
An example with some new components and bug fixes since the initial release announcement can be found here
…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.edizionilepenseur.it…
ay how many valid permutations exist.
But allow me to guesstimate a number for 20 components (no more, no less). Here are my starting assumptions:
Let's say the average input and output parameter count of any component is 2. So we have 20 components, each with 2 inputs and 2 outputs.
There are roughly 35 types of parameter, so the odds of connecting two parameters at random that have the same type are roughly 3%. However there are many conversions defined and often you want a parameter of type A to seed a parameter of type B. So let's say that 10% of random connections are in fact valid. (This assumption ignores the obvious fact that certain parameters (number, point, vector) are far more common than others, so the odds of connecting identical types are actually much higher than 3%)
Now even when data can be shared between two parameters, that doesn't mean that hooking them up will result in a valid operation (let's ignore for the time being that the far majority of combinations that are valid are also bullshit). So let's say that even when we manage to pick two parameters that can communicate, the odds of us ending up with a valid component combo are still only 1 in 2.
We will limit ourselves to only single connections between parameters. At no point will a single parameter seed more than one recipient and at no point will any parameter have more than one source. We do allow for parameters which do not share or receive data.
So let's start by creating the total number of permutations that are possible simply by positioning all 20 components from left to right. This is important because we're not allowed to make wires go from right to left. The left most component can be any one of 20. So we have 20 possible permutations for the first one. Then for each of those we have 19 options to fill the second-left-most slot. 20×19×18×17×...×3×2×1 = 20! ~2.5×1018.
We can now start drawing wires from the output of component #1 to the inputs of any of the other components. We can choose to share no outputs, output #1, output #2 or both with any of the downstream components (19 of them, with two inputs each). That's 2×(19×2) + (19×2)×(19×2-1) ~ 1500 possible connections we can make for the outputs of the first component. The second component is very similar, but it only has 18 possible targets and some of the inputs will already have been used. So now we have 2×(18×2-1) + (18×2-1)×(18×2-1) ~1300. If we very roughly (not to mention very incorrectly, but I'm too tired to do the math properly) extrapolate to the other 18 components where the number of possible connections decreases in a similar fashion thoughout, we end up with a total number of 1500×1300×1140×1007×891×789×697×...×83×51×24×1 which is roughly 6.5×1050. However note that only 10% of these wires connect compatible parameters and only 50% of those will connect compatible components. So the number of valid connections we can make is roughly 3×1049.
All we have to do now is multiply the total number of valid connection per permutation with the total number of possible permutations; 20! × 3×1049 which comes to 7×1067 or 72 unvigintillion as Wolfram|Alpha tells me.
Impressive as these numbers sound, remember that by far the most of these permutations result in utter nonsense. Nonsense that produces a result, but not a meaningful one.
EDIT: This computation is way off, see this response for an improved estimate.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
Added by David Rutten at 12:06pm on March 15, 2013
what they really mean by that, as in what buttons to push, so I assume it's a Windows Path entry?
2.) Modify PATH
Add the install location on the path, this is usually: C:\Program File\IronPython 2.7
But on 64-bit Windows systems it is: C:\Program File (x86)\IronPython 2.7
As a check, open a Windows command prompt and go to a directory (which is not the above) and type:
> ipy -V PythonContext 2.7.0.40 on .NET 4.0.30319.225
Tutorial on setting a Windows environmental variable (path):
http://www.computerhope.com/issues/ch000549.htm
But this fails to point out that path contains many entries already separated by semicolons so if I merely add a new variable called "path" it's likely that I will destroy existing program function. There's no info on how to just tack on another entry, and the Windows 7 edit box doesn't even show the whole collection, but one item (!), so I copied the existing path into a text editor to see the whole collection successfully and added the C:\Program Files (x86)\IronPython 2.7 entry after an added semicolon, correcting for an Enthought page typo of no 's' on the end of "Program Files". I also checked the others and many pointed to old missing directories so I deleted those entries.
...and the test fails and "ipy" is not recognized as a command, even though the path now shows up using "path" in the Windows CMD window, that is if I copy all by right clicking and pasting the stuff into a text editor to really view it all. I can run it from the source directory just fine.
The rabbit hole was indeed deep. Using the Task Manager (control-alt-delete) to kill Explorer and then Run in the menu to restart "Explorer," along with restarting the Windows CMD window however, worked. I can now invoke Iron Python ("ipy") via command line from any directory. For the "path" I edited path in the System Variables and not the User Variables. No, you don't have to type that whole crazy line above just to test the path variable, just "ipy" (and control-Z to quite IronPython) in the CMD window invoked by typing "cmd" into the Start menu search box.
From the CMD line this step did work fine:
3.) ironpkg
Bootstrap ironpkg, which is a package install manager for binary (egg based) Python packages. Download ironpkg-1.0.0.py and type:
> ipy ironpkg-1.0.0.py --install
Now the ironpkg command should be available:
> ironpkg -h(some useful help text is displayed here)
But of course Step 4 fails, giving pages of what seem to be error messages;
C:\Users\Nik>ironpkg scipy
Traceback (most recent call last):
File "C:\Program Files (x86)\IronPython 2.7\lib\site-packages\enstaller\utils.
py", line 92, in write_data_from_url
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 126, in urlo
pen
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 397, in open
File "C:\Program Files (x86)\IronPython 2.7\Lib\urllib2.py", line 509, in http
_response
...
Why can't I just download Numpy as a normal file and thus also have it easy for other users to install it when they use my scripts? This is just crazy and lazy. The Enthought developer has turned this into a computer game, with a missing registration link and then the last step spits out errors with utterly no information on how to fix it manually.
This Step 4 error is covered here:
http://discourse.mcneel.com/t/trying-to-import-numpy-in-rhino-python-but-im-getting-this-error-cannot-import-multiarray-from-numpy-core/12912/16…
Added by Nik Willmore at 2:36pm on October 11, 2015