ing illuminance and limiting exposure (lux hours). Hours with direct solar irradiance are likely to exceed the limiting illuminance thresholds, which range from (200 to 50 lux as per Table 3.4 in CIE 157:2004). It makes sense to consider direct illuminance (an ab=0 simulation in Honeybee) separately from a normal illuminance calculation.
Assuming that the museum exhibits have low to high responsivity to light, an ideal solution would minimize direct sunlight. For daylight from the sky and reflected light, it might be enough to keep the illuminance levels below the recommended thresholds and then sum up lux-hours.
Daysim, the annual daylighting engine used by Honeybee and DIVA, is not very accurate for direct-sun calculations. You will get more accurate results if you run your analysis with Radiance directly.
Instead of considering the horizontal illuminance grids, one can create grids that correspond to the dimensions of the exhibit and then average those values. I think single points, as shown in your gh file might not suffice. Calculating lux-hours is by far the simplest part of such a simulation. It will only require averaging these points, extracting them into an array and then summing up that array.…
eñadores, y creativos interesados en el aprendizaje de metodos avanzados de generación y racionalización de geometría compleja, y su implementación en distintas etapas del proceso de diseño.
Se abordaran los conceptos básicos para hacer frente a diversas problemas de diseño a través de la implementación de una serie de plataformas computacionales con el objetivo de construir un flujo de trabajo que permita optimizar proyectos de diversa escala y explorar esquemas geometricos complejos de manera rápida y eficiente.A lo largo del 6 dias trabajaremos con la plataforma de Modelado 3d Rhinoceros, el entorno de programación visual de Grasshopper y el motor de Renderizado de Vray.Estudiantes: $4,500.00Profesionistas: $5,500.00info+inscripciones:workshop@complexgeometry.com[044] 33 3956 9209[044] 33 1410 8975[044] 81 1916 8657
…
starting as soon as possible.
We're offering challenging projects, insights and contact to leading industry companies, project responsibilities according to abilities and initiative, great work environment and laid-back atmosphere, room to play and evolve,...
Our ideal candidate:
- is passionate about construction, engineering and (computational) design
- is proficient in Rhino / Grasshopper / (GH-)Python
- knows his ways around the Adobe Suite and MS Office
- has a current work permit for Germany
- is a German speaker (other native speakers also welcome, with excellent English skills)
- has an architectural background (Student / BA / MA /...), ideally with work experience
- is interested / has experience in digital manufacturing and prototyping
- will be able to join us shortly
We're looking forward to your applications / inquiries / CVs to: mpelzer@fat-lab.de
View our past projects here: www.fat-lab.com
(Current projects, unfortunately, are non-disclosed)
…
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
r "virtual partitions" as follows:
What I mean "air walls" here, is derived from the description of the E+ documentation with the header of "Air wall, Open air connection between zones". (Page 17, http://apps1.eere.energy.gov/buildings/energyplus/pdfs/tips_and_tricks_using_energyplus.pdf)
As I understand, the term "air wall" used in E+ here refers to a description of something like "boundary condition" between adjacent interzone heat transfer surfaces, but not a kind of "construction or material" (like air space resistance or air gaps within a wall/double glazing window).
The main purpose of introducing the "air wall", is to simulate or approximate the airflow/convection/natural ventilation effect between multiple thermal zones which are connected by a large opening.
In my previous tests, using HBzones and GB, I managed to create the gbXML file which can be successfully imported to DB (without assigning any constructions within HB). And the adjacency condition can be recognized automatically by DB, even when I did not use the "Solve adjacencies" component in HB - shared surfaces between multiple thermal zones are recognized automatically by BD as "internal - partition"(which are standard partitions, but not virtual partitions).
In order to create/approximate "virtual partition", I need to manually draw a "hole" in the standard partition surface (fig.1&2). Again, the reason why we want to use "virtual partitions"(or "air wall") is that it allows airflow between multiple thermal zones which are connected by large openings and we could get different temperature of the each subdivided thermal zone which compose a large thermal zone.
My question is, if there is a possible way to simulate/approximate this kind of "virtual partitions"(or "air wall") in HBzones or in GB? If so, I would like to test if DB recognizes it or not. Actually, we expect that there is no need to involve any manual operations (like drawing a "hole" in the standard partition surface) in DB, due to an automatic optimization loop.
Thank you!
Best,
Ding
fig.1
fig.2
…
ting at multiple geometries in the same location. I simply sorted the list of values and used the Delete Consecutive component. This potentially rearranges the order of values but I don't think that matters in your case. I also threw in an Int component which actually seems to make a difference (try sidestepping it and you will see!).
2-I flattened the output of the mesh component before sending it to union. This ensures that the original mesh is booleaned once with all the components rather than individually with each of the 86 components.
Is this what the result should look like?
One suggestion for future postings: when referencing geometry in rhino, it often helps if you attach your rhino file as well so people don't have to guess where you are starting from.
If you have further questions, just ask ;-)
cbass…
2d grid from
grasshopper but in 3d, fully controllable of course. I want to do something
like the image in this web
site:http://news.cnet.com/Photos-Weaving-high-tech-fabrics-of-the-future—page-12/2009-1008_3-5667576-12.html
I figured that connecting points and lines kind of works (point and line input AB command) but the line length changes when I move a
point. What I want to be able to do is to move a point and drag others but keep
the line segments constant, just as a real net.
…
Added by Jesus Garza at 8:28am on February 23, 2010
ehow acquire different settings/are calculated differently. Appears at random “rows” of points, sometimes it all works fine, so I need to do a series for the error to show. See images below.
In the Ladybug fly run the VT of the window changes.
It’s taken me a day and a half to track this error down. Phew.
I get the same error on two different comps.
What is causing this? Does anyone get the same error? Images below created with RADquality set to 2, and 7 cores. Fiddling with Radsettings dont help, I think, except error goes away with very low ab.
…