per bake commands to bake the connected geometry with the corresponding materials.
mxDiff is a simple diffuse material. Only reflectance color for 0° and 90° are exposed.
mxEmit is a basic emitter material. You can set light color, power and efficiacy of the emitter.
mxBasic is the most complex material for now. You can set all the properties of a single layer material including. Use this for transparent materials.
mList is your way if you don't want to create your own materials. This component returns a list of all the materials on the Maxwell scene manager. Make sure this is evaluated after you add your own materials if you want to see them in the list.…
te some implications and questions so I will go one by one:
"Now I would like to use a single VRay material as a template for creating multiple identical materials"I hope this will work, but as VRay does not expose any SDK, I would not guarantee any specific result.
"Now I need to add them to the document material table"This is done with a reference to a document instance, such as the one you get with the code doc.Materials (both in C# and Vb.Net).
"I'm not going to learn C# to modify his script"That's a pity, it would be nice to pass on this troublemaker to somebody else! :)Btw, C# and Vb.Net are very very similar. This script could be written in Vb.Net too.
"Reference to a non-shared member requires an object reference. (line 96)"This only means that you need to access the Materials property on an instance, not on the type (class) name. Change that line using what is written at point 2.
"Do I understand that the material has to be assigned to a particular object in order to enter the Material Table?"No it does not. But if you call the _Purge command it will be removed if it does not have an object that references it.
"Can I assign it to a Layer instead?"You do not need to. But this would be achieved with doc.Layers[whichLayer].RenderMaterialIndex = materialIndex; in C# or doc.Layers(whichLayer).RenderMaterialIndex = materialIndex in Vb.Net.
"Any ideas? A better way to do this?"If you found a way to bypass the VRay SDK not being there, this should work.
"Giulio's component has a type hint defined as a Material"It does not any longer. The hint was there in earlier versions of Grasshopper, but now the hint has disappeared. This is not so bad, and it is also the only way you would be able to use either a Material instance already or a string for a material name.
"How was that done?"Probably it was done in an older version of Grasshopper. But which version are you using?
"I can't figure out how to cast the input as a Rhino.DocObjects.Material, so you can see that I have cast it as a compatible type in the first 2 lines... is there a cleaner way?"That sounds like a good way actually. Be sure your component responds properly when something wrong is inputted, though.Dim mTemp As Rhino.DocObjects.Material = CType(M, Rhino.DocObjects.Material)in one line might also work. See msdn for more conversion operators and functions.
I hope this helps,
- Giulio_______________giulio@mcneel.com…
are invisible in the picture.
So what you see it's a common band that has lost all those characteristics of the original in order to protect the process.
We also did an "invisible setting" prototype which has built in Flexibility.
If you are in the jewelry industry you would know what I mean and it is close to a miracle.
It's a shame I can not share details and this is why I am planning my next major work on something 10 times more complex then this, at least.
It's will be for my own business and for the jewelry industry as well.
I hate to tease people and then not to be able to produce anything more than an image.
But I thought it would be better than nothing, at least for jeweler designers, so they can see that there are more and more users and that complexity it is not something to shy away from, and it's worth the time spent because the returns on production are far larger than for special orders and this is why GH is useful.
We can design a piece of jewelry usually in less then 1 hour, hence GH is not really worth the time.
But for production with so many variables (Finger sizes controlling most of the outcome together with stone sizes etc.) then GH it's a MUST!
I really appreciate everyone's comments and suspicions and I understand why.
99% of the people out there do not really understand the complexity of jewelry at the industrial level. It' s not just form but the post-production that's the killer.
This industry it's still an hybrid of technology and art with, and due to the lack of the old school pros, unfortunately, we face very lousy and unpredictable execution in the post production (after the casting process). This leaves you with a design process and intention that requires a lot of control over every possible variant of the object.
One wrong design aspect it's multiplied thousands of times at the benches (for every single piece) = bad profits!
It sound more serious that it is but very few companies are willing to do so (delivering good product vs low quality and this also happens because the consumer is not longer aware of the difference. So, who does keep quality, it's only because of integrity, third party QA or just pride).
This is way GH is invaluable. This is why that Def looks like out of proportion for that (Visual) simple band.
It is because there are dozens and dozens of variable effecting everything else. In fact it is not even complete as it is in order to cover everything but the most critical ones.
Sorry for the long replays. I am an instructor and a professional jeweler by trade since I was very young and I love to teach, so I overflow with explanations... and Components :)).
Next time it will be "in the open" as they say...…
uments:
1. You are targeting CATIA don't you? (not exactly tomorrow but ... soon) and/or SolidWorks (hello C# haven't we met before?).
2. You MUST deal with nested block instances instead of what you are trying to do right now (I'm talking about the real MERO things not abstract Lines and points). This is not doable with GH components I'm afraid (but it's rather easy with code).
3. You MUST deal with RDBMS in order to keep track with what's going on in your company per project per case per designer (who sells that bolt? what's his cat name? is he a reliable supplier? what I'm doing in life? ... that sort of "queries"). At this point: CATIA is 1% CAD things and 99% PLM stuff (Product Life cycle Management). We do want that since it's 21st century running don't we?.
I hear you: but these are 3 arguments ... indeed but ... hey who's counting? he he.
Method:
A. This def attached has a very simple C# that gets mesh Pts and makes a nice U/V style collection of points (DataTree in plain English).
B. Then we go to that umbrella sticks thingy: we can calculate anything (already the thing does "some") plus your collections of divided points (with the right way, he he) VS a given node: you said (Skype) that you want to calculate angles with these (from 2 to 6) in mind: obvious since you are doing real-life MERO things.
C. Then we could calculate the appropriate Planes for PlaneToPlane transformations: get a nested instance definition (the red things that you've showed to me yesterday) placed at 0,0,0 (Plane.WorldXY) and put in in every Plane collection related with every node (clash defection is an obvious must).
Case resolved, closed: what about that Vodka?
More in Skype
…
merely automates finding clear intersections between pairs of objects and then splits the objects along those intersection *curves*, deletes the trims, then joins the remains, and cycles on. But within the confusing Rhino Settings tolerance value, wherever surfaces actually just sort of come closely together, there *is* *no* clear intersection curve. So it bugs out and stops working EVERY time you try more than a dozen or two spheres.
Some software can do this by switching to volumetric pixels (voxels). $9K-$30K Geomagic Freeform is an example of this. It also fails sometimes, often due to memory issues, as you can imagine since it needs to fill all inner space of each sphere definition with 3D pixels.
Materialize Magics for $16K can often handle such Booleans well. It will take a seeming lifetime to figure out such often pirate software kludges though.
One thing you can try though is to simply drape a mesh or NURBS plane onto the top of your spheres.
There's a well known *reason* your Booleans are failing. Nobody here has yet even hinted at it:
The main reason is that Rhino/Grasshopper developers don't care about the human element. The math exists to make this work very fast, every time. It just has to join things *right*, incorporating human knowledge of kissing surfaces, instead of acting stupidly, like some pocket calculator. But that would involve hacks that make 99% of complex Booleans work instead of 10%, and we can't have that since it will be SLOWER for the other 1% that just happen to have no nearly kissing or really kissing surfaces.
You could also use the new Cocoon plugin to do a surface *around* your structures, with a given radius of extension beyond the spheres, then offset that surface back the same radius. That is 100% robust, but won't offer quite as sharp of intersections, more rounded, like most everybody wants anyway.
You can *test* Boolean failures, by running a Grasshopper intersection command, to see the intersection curves, and zoom in to see how badly many of them are, all knotted, or twisted, or even with gaps, often with gaps.
It's a math problem nobody at McNeel wants to solve, sorry.
Just write a check for $25K and spend six months taking notes, like I did, and you can merge your simple spheres finally.…
Added by Nik Willmore at 6:33pm on October 20, 2015
lla progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse
___________________________________________________________________________________
luogo:
Sala meeting Hotel Mercure Milano Centro Piazza Oberdan 12 – 20129 MILANO
Scadenza iscrizioni: 12 Novembre 2011 – ore 15.00
___________________________________________________________________________________
info e prenotazioni:
Le Penseur (coordinamento formazione)
info@lepenseur.it
081 564 21 84
347 548 71 78
quote di partecipazione e programma (formato PDF)
ulteriori informazioni sui corsi PLUG > IT
___________________________________________________________________________________
PROGRAMMA DEL CORSO
GIORNO_01
10.00 – 10.30: presentazione workshop
10.30 – 11.30: introduzione alla progettazione parametrica: teoria, esempi, casi studio
11.30 – 13.00: Grasshopper: concetti base, logica algoritmica, interfaccia grafica
13.00 – 14.00: break | lunch
14.00 – 16.00: nozioni fondamentali: componenti, connessioni, data flow
16.00 – 18.00: esercitazione
GIORNO_02
10.00 – 12.00: funzioni matematiche e logiche, serie, gestione dei dati
12.00 – 15.00: analisi e definizione di curve e superfici
GIORNO_03
10.00 – 12.00: definizione di griglie e pattern complessi
12.00 – 13.00: trasformazioni geometriche, paneling
13.00 – 14.00: break | lunch
14.00 – 16.00: esercitazione
16.00 – 18.00: attrattori, image sampler
GIORNO_04
10.00 – 13.00: data tree: gestione di dati complessi
13.00 – 14.00: break | lunch
14.00 – 15.00: digital fabrication: teoria ed esempi
15.00 – 18.00: nesting: scomposizione di oggetti tridimensionali in sezioni e posizionamento su piani di taglio per macchine a controllo numerico CNC…
up structural systems in the parametric environment of Grasshopper. Participants will be guided through the basics of analysing and interpreting structural models, to optimisation processes and how to integrate Karamba3d into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba however advanced users are also encouraged to apply. It is open to both professional and academic users.
Course Fee:
Professional EUR 750 (+VAT)
Educational EUR 375 (+VAT)
Course Outline
Introduction & Presentation of project examples
Optimization of cross sections of line based and surface based elements
Geometric Optimization
Topological Optimization
Structural Performance Informed Form Finding
Understanding analysis algorithms embedded in Karamba and visualising results
Complex Workflow processes in Rhino3d, Grasshopper3d and Karamba3d
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 places are required for the workshop to take place.
The workshop will be cancelled should this quota not be filled by May 31st.
The workshop will be taught in English. Basic Rhino and Grasshopper knowledge is recommended. No knowledge of Karamba is needed.
Participants should bring their own laptops with either Rhino5/Rhino6 and Grasshopper3d installed. A 90 day trial version of Rhino can be downloaded from Rhino3d.
Karamba ½ year licenses for non-commercial use will be provided to all participants.
…
up structural systems in the parametric environment of Grasshopper. Participants will be guided through the basics of analysing and interpreting structural models, to optimisation processes and how to integrate Karamba3d into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba however advanced users are also encouraged to apply. It is open to both professional and academic users.
Course Fee:
Professional EUR 750 (+VAT)
Student EUR 375 (+VAT)
Course Outline
Introduction & Presentation of project examples
Optimization of cross sections of line based and surface based elements
Geometric Optimization
Topological Optimization
Structural Performance Informed Form Finding
Understanding analysis algorithms embedded in Karamba and visualising results
Complex Workflow processes in Rhino3d, Grasshopper3d and Karamba3d
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 places are required for the workshop to take place.
The workshop will be cancelled should this quota not be filled by October 15th.
The workshop will be taught in English. Basic Rhino and Grasshopper knowledge is recommended. No knowledge of Karamba is needed.
Participants should bring their own laptops with either Rhino5/Rhino6 and Grasshopper3d installed. A 90 day trial version of Rhino can be downloaded from Rhino3d.
Karamba ½ year licenses for non-commercial use will be provided to all participants.
…
ive 'correct' normal.
Non-normalized cross products is effectively weighting face normals by area, and is fast and simple, so we put that one as the default.
In some cases normalizing the cross-products improves the result, but not always.
Another option is to weight by angles, though this is computationally slightly more expensive, so might not be ideal for real-time updates on large meshes.
As an example, here is a mesh with a 90° corner, and uneven meshing on the 2 sides.
The arrows show:
0- Area weighted (non-normalized cross products)
1- Angle weighted
2- Normalized cross-products
Here the angle-weighted normal is the one at 45°, which is intuitively the 'best' one in this case.
These 3 seem to be the most commonly used, but there are many other possible definitions of normals - such as inverse-area weighted, mean curvature, etc...
I think really what would be best would be to put a few of these into Plankton, and include an optional argument in GetNormal for selecting which one you need for a particular application.
Pull requests welcome if you feel inspired to add this!
http://meshlabstuff.blogspot.co.uk/2009/04/on-computation-of-vertex-normals.html
http://steve.hollasch.net/cgindex/geometry/surfnorm.html…
us allows Grasshopper authors to stream geometry to the web in real time. It works like a chatroom for parametric geometry, and allows for on-the-fly 3D model mashups in the web browser. Multiple [Grasshopper] authors can stream geometry into a shared 3D environment on the web – a Platypus Session – and multiple viewers can join that session on 3dplatyp.us to interact with the 3D model. Platypus can be used to present parametric 3D models to a remote audience, to quickly collaborate with other Grasshopper users, or both!
You can down load the Grasshopper plugin at food4rhino, and visit 3dplatyp.us to view your geometry on the web. This first round of Alpha testing will run for two weeks, until April 24 2014, after which the Grasshopper components will not solve.
We are very interested in hearing feedback from the community while the project is still in the prototyping stages of development. Please use the comments on this discussion to ask questions, suggest ideas, report bugs, etc. We are planning on rolling out another public alpha release or two this Spring, depending on how this first one goes, in advance of our Technology Symposium and Hackathon in New York.
Check out our getting started video below, and enjoy!
…