heranno la maggior parte delle funzionalità di Rhino, tra cui i comandi più avanzati per la creazione di superfici.
Struttura Le lezioni tratteranno in maniera sistematica argomenti riguardanti l'interfaccia utente, i comandi, la creazione e modifica di curve, superfici e solidi.
Risultati attesi Dopo questo corso l’allievo deve essere in grado di:
• Muoversi agevolmente attraverso l’interfaccia di Rhino.
• Identificare quando è richiesto modellare in maniera free-form o di precisione.
• Creare e modificare curve, superfici e solidi anche di natura complessa.
• Utilizzare ausili di modellazione per la precisione.
• Produzione di facili rendering per la visualizzazione dei modelli di Rhino.
Destinatari Questo corso è rivolto a progettisti e studenti che vogliono imparare in modo efficace i concetti e le caratteristiche del software di modellazione Rhinoceros. Le lezioni saranno esposte da un docente ART qualificato dalla McNeel esperto di modellazione Nurbs.
Prerequisiti Per affrontare il corso sono richieste competenze di Windows, passione e volontà di modellazione; precedenti esperienze di modellazione, anche con altri software, sono utili ma non indispensabili.
Attestato Alla fine del corso verrà rilasciata l’attestato di partecipazione ad un corso qualificato McNeel valido anche per l’ottenimento di crediti formativi universitari.
Luogo Le lezioni si terranno in Via dei Valeri 1 int.9, 00184 ROMA
Pre-iscrizione Per garantire il numero di iscrizioni è necessaria una pre-iscrizione inviando una mail all'indirizzo 4planstudio@gmail.com il cui contenuto deve essere il seguente:
Nome:
Cognome:
Indirizzo di residenza:
mail:
telefono:
La preiscrizione dovrà avvenire entro il 30/11. A seguito di questa procedura verrà inviata dal tutor una mail di conferma con le procedure di iscrizione.
Quota di iscrizione
Il corso prevede le seguenti quote di iscrizione:
studenti: 400 Euro; (sarà necessario presentare in copia la ricevuta di pagamento dell’anno in corso)
non studenti: 470 Euro. Le quote sono considerate iva inclusa.
Info
Per ulteriori informazioni sono a disposizione i seguenti contatti:
Responsabile didattico: arch. Michele Calvano
Info mail: 4planstudio@gmail.com
tel: 340 3476330
…
ermedio fondamentali per la corretta comprensione del software Rhinoceros.
Il corso si svolgerà nei seguenti giorni:
Lunedì 07/10/2013 dalle ore 9:30.00 alle ore 13:30
Martedì 08/10/2013 dalle ore 9:30.00 alle ore 13:30
Lunedì 09/10/2013 dalle ore 9:30.00 alle ore 13:30
Martedì 15/10/2013 dalle ore 9:30.00 alle ore 13:30
Scadenza preiscrizione per Rhinoceros StartUP : 04/10
Contenuti
- Presentazione e spiegazione dell’ interfaccia
- Approfondimento dell’ utilizzo dei comandi base 2D per la gestione del documento di progetto
- Teoria Free-Form
- Modellazione di architetture semplici per eseguire operazioni Booleane semplici e complesse
(addizione, sottrazione, intersezione)
- Presentazione e spiegazione delle superfici a doppia curvatura e loro pannellizzazione
- Comandi di editing, superfici tagliate e raccordi tra superfici
- Analisi di curvatura, tangenza e posizione delle superfici
- Impaginazione e costruzione degli elaborati bidimensionali attraverso modelli tridimensionali
- Modellazione di architetture complesse
Destinatari
Il corso è rivolto a studenti universitari, professionisti ed anche a coloro che non hanno precedenti esperienze di modellazione 3D.
Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso di Rhinoceros qualificato e certificato dalla casa sviluppatrice McNeel, valido anche per la richiesta di crediti formativi universitari.
Docente del corso
Il corso sarà tenuto da un docente qualificato con riconosciuta esperienza universitaria, esperto in disegno e rappresentazione dell' architettura e del design ed istruttore McNeel:
Michele Calvano| _architetto, dottore di ricerca in rappresentazione architettonica specializzato nella modellazione matematica (Nurbs) e modellazione parametrica.
Docente ART ( Autorized Rhino Trainer) - [vedi - CV]
Info
Per ulteriori informazioni di carattere didattico sono a disposizione i seguenti contatti:
Responsabile didattico e docente del corso : arch. Michele Calvano
Info mail: parametricart@gmail.com
cell: 340 3476330
…
ll-Facade using Rhino and Grasshopper Participants will learn; Rhinoceros Grasshopper Advanced Parametric Design Brick Formations and Explorations Shadow-Design Relationship
Session 2: Advanced Digital Modeling for Additive Manufacturing (3D Printing) Participants will learn; How to prepare a 3D design to 3D Printing process in Rhinoceros Advanced Methods for 3D Print optimisation for time and cost effective production 3D Printing software education Cura
INFO
Date Saturday, 28 September 2019 Schedule 9:30am – 2:30pm (Session 1) | 2:45pm – 7:00pm (Session2) Venue (TBC) Pada Labs, Istanbul Language English/Turkish Softwares Rhinoceros Grasshopper 3D Cura Participants will need to bring their own laptops with software installed; other plugins will be distributed at the workshop. Prerequisites All tutorials are open to beginner level. No previous knowledge of Cura and Grasshopper needed. Basic knowledge of Rhinoceros recommended. Participation The workshop is limited to the first 20 applicants. Each student will receive a certificate of participation. Prices for each session: (You can pick one and attend one) Special Early registration (Deadline 1 August ) Students 310 TL Professionals 400 TL Regular registration Students 390 TL Professionals 480 TL Prices for Session 1&2 Combined: (Full Day) Special Early registration (Deadline 1 August ) Students 540 TL Professionals 690 TL Regular registration Students 620 TL Professionals 790 TL DISCOUNTS Group registration of 3 or more people will get a 15% discount. * Previous Pada workshop students will get a 10% discount. DIRECTOR Begum Aydinoglu, M.Arch AA DRL will be instructing and directing the following workshops. REGISTRATION: Email to pada.workshops@gmail.com for registration instructions. Please note that we have limited seats and there won't be any exceptions. …
ssibili e facili da usare. Il corso parte dalle basi della programmazione di arduino fino ad arrivare all’interazione tra un oggetto fisico ed un imput informativo. tutor: Gianpiero Picerno Ceraso
Programma: I giorno Introduzione al Phisical Computing, input digitali e analogici, le basi del linguaggio di programmazione, esempi applicativi; led, pulsanti, fotorestistenze, servo motore, sensore di temperatura, di flessione, sensori di movimento, potenziometri.
II giorno Arduino ethernet, uso di un relè per carichi elevati, accelerometro, introduzione a Processing, interazione di Arduino e Processing, Introduzione a Grassoppher e Firefly e interazione con Arduino.
orario corso: 10:00 – 13:00 e 14:00 – 17:00 (pausa pranzo 13:00 – 14:00) costo: 150€ + IVA deadline: 13 marzo numero minimo di partecipanti: 3
Per iscrizioni scrivi a info@medaarch.com specificando nome, cognome, mail, recapito telefonico e il nome del corso al quali sei interessato. In seguito all’invio del modulo di pre-iscrizione, i partecipanti riceveranno una mail contenente tutte le specifiche di pagamento.
Per seguire il cluster su Arduino è necessario installare il software Arduino 1.0.5 al seguente linkhttp://arduino.cc/en/Main/Software#.Ux3hQj95MYE facendo attenzione a scaricare quello relativo al proprio sistema operativo, Windows 32 o 64 e Mac OS.
Software necessari solo per una parte del corso: Processing 2.1.1 https://processing.org/download/?processing
Rhino 5 http://www.rhino3d.com/it/download Grasshopper for Rhino5http://www.grasshopper3d.com/page/download-1Firefly http://fireflyexperiments.com/
Il cluster rientra in un fitto calendario di attività formative organizzate dalla Medaarch per lanno 2013-2014.…
Series“, è il corso più seguito in Italia sulla modellazione parametrica, giunto al nono anno consecutivo di attivazione. Plug it fornirà ai partecipanti un’effettiva padronanza delle più avanzate tecniche di modellazione digitale, approfondendo le metodologie della modellazione algoritmica e parametrica nel campo dell’architettura e del design del prodotto. Il corso è rivolto a studenti e professionisti dei settori della progettazione architettonica, design, moda e gioielleria, con esperienza minima nel disegno CAD bidimensionale (acquisita su qualsiasi piattaforma software) e si articolerà in lezioni teoriche frontali ed esercitazioni guidate.
_
FORM FINDING STRATEGIES | Livello Intermedio | Analisi ambientale ed ottimizzazione della forma
Form Finding Strategies è il secondo step del percorso formativo in tre fasi “AAD Workshop Series“. Il workshop intende esplorare le possibilità di generazione di forme efficienti in relazione ad influenze esterne ed alle caratteristiche intrinseche della materia stessa. Analisi ambientale (input solari, termici ed acustici) ed analisi/ottimizzazione strutturale FEM saranno le principali metodologie utilizzate per raggiungere gli obiettivi di ricerca della forma. Saranno introdotti numerosi plug-ins tra cui: Weaverbird, Kangaroo, Geco/Ecotect, Ladybug, Millipede. Il corso si rivolge a studenti e professionisti con conoscenza base di Rhino e Grasshopper.
_
PERSPECTIVES | Livello Avanzato | Python coding e modellazione algoritmica avanzata
Il nuovo corso Perspectives proposto per la prima volta nel 2019 (ed ultimo step del percorso formativo in tre fasi “AAD Workshop Series) introdurrà gli studenti alla programmazione Python ed alla sua integrazione con Grasshopper. Verranno inoltre esplorate tecniche avanzate di generazione formale basate su iterazioni. Tra i principali plugins utilizzati: GhPython, Anemone, Hoopsnake, Plankton, MeshMachine, Pufferfish. Pensato come workshop innovativo sulle prospettive e sfide future del design computazionale, è rivolto a studenti e professionisti con esperienza in modellazione algoritmica con Grasshopper.
INFO ED ISCRIZIONI
…
use I don't agree with the practice of using site EUI as a metric to evaluate the thermodynamic performance, environmental impact, or monetary value of a building. I disagree with this practice for the same reason that there are no "totalThermalLoad" and "thermalLoadBalance" for simulations run with full HVAC. I can summarize these reasons in the following way:
When we run a simulation with ideal air loads, the heating/cooling values we get are THERMAL ENERGY that is directly added to or removed from the zone. In this way, we can draw a rough parallel between these two types of energy since they are are generally of a similar type and quality. As such, I am ok with adding them together to get total thermal load or subtracting them to get a sense of thermal load balance.
However, when we run a simulation will full HVAC, the heating/cooling values that we get are usually HEATING FUEL ENERGY and ELECTRICITY respectively. Fuel energy and electricity are fundamentally two different types and qualities of energy. To cite the second law of thermodynamics, the exergy (or the capacity to do work) of electricity is much greater than that of fuel. This is evident in the fact that, to produce a given unit of electricity, I often have to burn at least 3 units of fuel energy (though this can be much more for inefficient plants). With each step in a power plant - making steam, turning a turbine, turning a generator - there are significant energy losses. This difference in exergy is also evident in the fact that there are so many more things that I can do directly with a unit of electricity than I can do with the same unit of fuel energy. I can use electricity to directly refrigerate, produce light energy or power a motor just as easily as I can use to to cook, produce hot water, or heat a space. While I can cook, make hot water, or heat a space directly with fuel energy, refrigeration and lighting are much more difficult. For this reason, I do not feel comfortable adding electricity and fuel together either in the totalThermalLoad output or in a site EUI metric.
Still, the use of site EUI has become so ingrained in the industry that I have to acknowledge it and at least show users how it's calculated. In my view, it's an ad-hoc metric that was invented to deal with previously limited amount of information on energy sources.
Instead of using site EUI, I would recommend using the following metrics depending on what you are trying to evaluate:
Utility Cost / Square Meter - to measure the monetary value of a building to an owner or user
Kg CO2 / Square Meter - to measure the environmental and climatic impact of a building
Emergy / Square Meter - to measure the overall thermodynamic performance of a building
The first two are actually fairly easy to calculate these days just by researching your site's utility rates or grid energy mixture and multiplying the building electricity or fuel by their respective rates. I will add in some capabilities to Honeybee soon to make it even easier for you to get these values from your EPW file and databases of utility rates/grid mixture. Emergy is much harder to calculate as you have to trace all your energy sources all of the way back to the sun but there are a number of experts at work to make this calculation possible (probably in the next few years, we may have much easier ways to calculate it).
Hope this helps explain the current setup.
-Chris…
eventually found out about genetic algorithms on which I found extensive researches, projects,... ! I looked into it and ended up on a few papers which I believe are the jumpstart for my master thesis.
"Galapagos; on the logic and limitations of generic solvers" by David RuttenArticle in Architectural Design 83(2) March 2013
"Black-box optimisation methods for architectural design" by Thomas Wortmann and Giacomo NanniciniConference Paper: CAADRIA 2016, At Melbourne, AU, Volume: 177-186
So I started looking into alternatives to genetic algorithms in architectural design.So far, I've ended up on :
Thomas Wortmann's work with the surrogate(or model) based optimization approach!You can check out the tool he developped for GH (Opossum):http://www.food4rhino.com/app/opossum-optimization-solver-surrogate-models
Judyta Cichocka's work, specially with the Swarm approachYou can check out the tool she developped for GH (Silvereye):http://www.food4rhino.com/app/silvereye-pso-based-solver
And that's it !!! I've been researching through article references (mainly on "researchgate") but I'm now stuck in a loop of references I already visited!That probably means the litterature on the subject is not (yet) extended but I might probably be missing something.The keywords make it difficult to search : "optimisation", "algorithms", "architecture", send me most of the time to computational engineering and deep mathematics papers I unfortunately do not have the background knowledge to comprehend ! So there it is ! If you have any clue of where (or how ! ) I should be looking, please tell me :)I know Mr Rutten is pretty active on the forum so hopefully... (fingers crossed :p) !Also if you have any good tips for getting into algorithms in general (you think could help), I'd be glad to hear(read) it ! A book, tutorials maybe ?!So, autors, architects, projects books, articles, conferences I should go to,specialized architecture offices/studios (I'm also looking for an internship so ...).If you know about a more appropriate forum please let me know !If you want to get deeper into this, you can contact me at :
e1635331@student.tuwien.ac.at
tdissaux@student.ulg.ac.be
My master thesis is due for may 2018 but I have a paper to write for January 2018 in order to be elligible for a PHD program afterwards.What I mean by that is that if you read this message in 6 month, I'll still be open to discussion !
I am right now an erasmus student at TUWien (Vienna) but my main university is The university of Liège in Belgium.I can handle French, English, Italian litterature and eventually Dutch if really you think it's worth it ! I have access to most online libraries via my university's portals so access shouldn't be an issue !I'm very excited to hear from you I wish you all a great day,Cheers,Thomas
…
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016