join site boundary curves with voronoi curves so that voronoi curves at the edges becomes a closed polygon?
2)I want to create a line between voronoi curve control points and voronoi cell centroid points, such that each 2D voronoi cell is broken down into a sets of triangles. Please refer attached sketch.
3) Then How do i project voronoi curves along with triangl curves onto a vaulted roof?.
4) lastly, i want to give some thickness to those curve. i.e. the curves basically are structural beams of the roof. with my definition pipe command does not work very well i.e. pipes intersect and crossover at each vertices, which is not my intention.
attached is a sketch and my definition.
Can any1 help me with any of the 4 problems?
Thank you very much
AB…
g a problem though when trying to set a daylight simulation with some determined radiance parameters. Here's the problem: After many tries I think I found out that setting -ab = 6 and at the same time -aa = .05 creates some sort of problem, because when I try to do so My PC blocks for several minutes, without letting me manually end processes from taskmanager, and when I'm able again to enter grasshopper, i get the following error:
"Solution exception:index out of range: 0"
Does this really depends on the parameters and values I found out or is it related to something else? Is the problem relative to the structure of HoneyBee or is it just relative to my specific case (and maybe PC)? Is it possible to solve it, and if yes, how?
Atteched you find my rhino model and my grasshopper file.
Thanks in advance for your help and again many compliments!
Luigi…
e design intent, but this is what Inventor is good at. The way it packages bits of 'scripted' components into 'little models' that can be stored and re-assembled is central to MCAD working. The big speed/usability advantage for the user that apps like Inventor provide is: All the defining, handling, assembling/gluing to the adjacent components is done as part of its 'main loop' with all the hooks that can cater to user interaction, ie traditional modeling. I guess one example of this is how Revit handles the placing of Adptive Components. AC's (and GC's GFT's) is pretty much a copy of Catia PowerCopies (which are probably a copy of something else). When placed, the AC's input points are transferred one by one to the cursor for the user to interactively place them. When copied, it tries to keep the same inputs, while changing its position/parameters. This saves a lot of time/nerves.
Catia, OTOH, is still thinking in terms of scripting and looks for matching property names, or uses a script to match strings, that nearly match. Sure, sometimes, this is unavoidable, but I think that there is a lot of room for incorporating a more traditional 'event-based' interface or 'wrapper' around the scripted components.So much is scripted in GH, maybe it should also be possible to script/define/constrain/assist the placement/gluing of the results? An example of this is how Modo's Toolpipe works. The Toolpipe is a simple tool to record the active selection, snap/alignment/working plane, tool settings for re-use. I could see the user benefitting if the GH component was aware of the app's 'state' when placing/assembling components.
Also, a lot of simple things could be 'modeled' first and translated into scripted form if GH could read the active workplane, snap settings etc. Draw first, convert to hand-scripted script later?Columns: Looking at your description, the vertical elements were modeled in Rhino, and referenced in GH? 5hrs to get some points on the lines? And using Excel as the design table? I think this could be 'drawn' and constrained in Inventor in a lot less time. I know the GH model would have a lot of flexibility, but in this case, what can you do with it that wasn't provided by an Inventor model? The other thing that MCAD apps like Inventor have, is the 'structured' interface that offers up all that setting out information like the coordinate systems, work planes, parameters etc in a concise fashion in the 'history tree'. This will translate into user speed. GH's canvas is a bit more freeform. I suppose the info is all there and linked, so a bit of re-jigging is easy. Also, see how T-Flex can even embed sliders and other parameter input boxes into the model itself. Pretty handy/fast to understand, which also means more speed.Would love to understand what you did by sketching.Starting point: I think we are talking across purposes. AFAIK, the solving sequence of GH's scripted components is fixed. It won't do circular dependencies... without a fight. The inter-component dependencies not 'managed' like constraints solvers do for MCAD apps.
With a manager, If one of the beams is connected to the column, changes in either component would trigger changes in the other to preserve the connection, regardless of the creation history. In GH, the dependencies are fixed, and the connection points would probably need to be defined independently, and placed 'upstream' of both elements. This makes editing laborious... but DAG processing is a lot quicker than constraints solving. Switching direction seems to be possible in the animation world. Maya etc have IK/FK switching, which seems to be able to reverse the solving direction on demand. Not sure how or whether the rig is scripted.…
. From the Thermal Comfort Indices component, Comfort Index 11 (TCI-11):MRT = f(Ta, Tground, Rprim, e)
with:- Ta = DryBulbTemperature coming from ImportEPW component- Tground = f(Ta, N) where N comes from totalSkyCover input. Tground influences the long-wave radiation emitted by the ground in the MRT calculation.- Rprim defined as solar radiation absorbed by nude man = f(Kglob, hS1, ac)- ac is the clothingAlbedo in % (bodyCharacteristics input)- I can't find any definition in the code of Kglob and hS1. Could you tell me please what are those values referencered to? --> probably the globalHorizontalRadiation but how?- e = vapour pressure calculated from Ta and Relative Humidity input
Do you agree that in this case the MRT does not depend on these inputs: location, meanRadiantTemperature, dewPointTemperature and wind speed?It does not depend neither on the other bodyCharacteristics like bodyPosture, age, sex, met, activityDuration...?
MRT calculated by the TCI-11 method is the mean radiant temperature of a vector pointing vertically with a sky view factor of 100%?For ParisOrly epw,
2. From the SolarAdjustedTemperature component (that seems to be more used for the UTCI calculation examples on Hydra compared to TCI-11).
In contrast to the TCI-11, this component distinguishes diffuse and direct radiation and contextualizes the calculation thanks to _ContextShading input, right? It can also be applied to a mannequin thanks to the CumSkyMatrix and thus evaluate the dishomogeneity of radiation exposure.This component seems not to consider the influence of vapour pressure on the result --> is it then more precise to put the MRT output (from the TCI) as an input of meanRadTemperature for SolarAdjustedTemperature?The default groundReflectivity is set to 0.25 --> is GroundReflectivity taken into account in the Tground or MRT calculation in the TCI component? If yes, what is the hypothesised groundReflectivity?The default clothing albedo of 37% (TCI-11 bodyCharacteristics) corresponds to Clothing Absorptivity of 63%?
If the CumSkyMatrix input is not supplied, I get 9 results for the mannequin --> where are those points/results coming from?
If the CumSkyMatrix input is supplied,I suppose the calculation of the 482 results correspond to a calculation method similar to the radiation analysis component that is averaged over the analysis period. Right?But I don't understand why the mannequin is composed of 481 faces and meshFaceResult gives 482 results.
Finally, what is the link between the MESH results, the solarAdjustedMRT and the Effective Radiant field ? Is there a paper to have a detailed explanation of the method?
3. Here are some results for the ParisOrly energyplus weather data. You can find here attached the grasshopper definition.There is no shading in this simulation and the result coming from the ThermalComfort indices for MRT is very different compared to the solar adjusted MRT.Why such a big difference and which of the result should be plugged into the UTCI calculation component?
Results for ParisOrly.epwM,D,H:1,1,12
Ta : 6.5°Crh: 100%globalHorizontalRadiation: 54 Wh/m2totalSkyCover: 10MRT (TCI-11): 1.2°C
_CumSkyMtxOrDirNormRad = directNormalRadiation : 0 Wh/m2diffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.64°CMRTDelta: 4.14°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = TasolarAdjustedMRT: 10.47°CMRTDelta: 3.97°C
_CumSkyMtxOrDirNormRad = CumulativeSkyMtxdiffuseHorizontalRad: 54 Wh/m2_meanRadTemp = MRT (TCI-11)solarAdjustedMRT: 5.17°CMRTDelta: 3.97°C
Thanks a lot for your helpRegards,
Aymeric
…
st sampled into data trees (if not we must "add" them "manually" == code: get this item from Rhino and put it there) into collections.
2. Then we must perform some kind of selection(s) on a per individual item basis and THAT is in 99% of cases "manual" (== code) or on a per "global basis" (hard or soft clusters et all == code). If clusters are hierarchical and some kind of dendrogram is required ... this obviously means ... er ... more code.
3. Doing the 2 we use some kind of input by means of sliders (say pairs of 2: for branches and items) and therefor MAY their values cause slider control issues (== code). For instance IF this slider yields a x event > do this and that to some other sliders.
4. Then perform the "histogram" required and obviously treat this as just a variant (i.e. a possible solution out of a given collection witch is variable) meaning ways to "store" this into parameter(s) (as persistent data). This also requires code.
In a nutshell (and oversimplified): given a collection of "shapes" pick some make the histogram, store the result (or do something with that and store the outcome as well) recall some other for any reason, modify it, stored it ... and then repeat until the end of time (or worst: until you are out of espresso).
As I said: NOT a task for a novice AND NOT a task for someone not familiar with code matters (But I guess that you qualify in both areas, he he).
I do this type of things day in day out (but for real-life AEC purposes) therefor I could make a "simple demo" (add some "" more) but ... well ... you are warned, he he
But in case that you take the wrong decision (you are warned) we must use Skype a bit.…
m
-Area of blue line: min. 80% of the rectangel a x b
-Max. hight h of the top point: h,max = a
-Min. Volume between rectangel a x b and membrane: 500 m3
Can anyone help me?…
ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
i have to rely completely in passive means.
To speed things i'm calculating comfort for Extreme hot/cold week, thinking maybe on typical weeks instead.
The cool week is kind of "right", but the hot (extreme) is giving all night hours 100% comfort. Knowing the climate, there is no way this can be the case. Some of the settings with the european standards give sometimes the right tendency, but still, compared to ASHRAE's the average of % percentage is too high.
Also my assumptions for flexibility of use/clothing/etc is the maximal. I mean, no constrains on this respect ("let's be passive as much as we can").
So right now i have no specific questions, but rather your advice, if any: "What you would do ...?? (I don't like these kind of questions, sorry).
A request, yes, if it is possible to output the set temperature for each hour. For instance, when you give the degFromTargetMtx i'll like to know this target. This is for control, and i think this is important for better understanding this black box.
Any other insights you may have, just shoot.
Not related to the discussion, but if you happened to check the model, we are simulating 2 apartments in the building. The northern one is only one thermal zone. The southern is divided in rooms. I wanted to see how much difference e get between both ways. And there is. No doubt the more detailed modeling looks more reliable. Also if you have some points here, shoot again.
BTW humidity, look at page 32-33 in the AC book. Nicol is clear on the "real" influence of the humidity, arguing it is mostly psychological than real.
Thanks again, and to you too Mauricio.
-A.…
Integer = 0 To 9
val *= 2
lst.Add(val)
Next
Since val is a ValueType, when we assign it to the list we actually put a copy of val into the list. Thus, the list contains the following memory layout:
[0] = 2
[1] = 4
[2] = 8
[3] = 16
[4] = 32
[5] = 64
[6] = 128
[7] = 256
[8] = 512
[9] = 1024
Now let's assume we do the same, but with OnLines:
Dim ln As New OnLine(A, B)
Dim lst As New List(Of OnLine)
For i As Integer = 0 To 9
ln.Transform(xform)
lst.Add(ln)
Next
When we declare ln on line 1, it is assigned an address in memory, say "24 Bell Ave." Then we modify that one line over and over, and keep on adding the same address to lst. Thus, the memory layout of lst is now:
[0] = "24 Bell Ave."
[1] = "24 Bell Ave."
[2] = "24 Bell Ave."
[3] = "24 Bell Ave."
[4] = "24 Bell Ave."
[5] = "24 Bell Ave."
[6] = "24 Bell Ave."
[7] = "24 Bell Ave."
[8] = "24 Bell Ave."
[9] = "24 Bell Ave."
To do this properly, we need to create a unique line for every element in lst:
Dim lst As New List(Of OnLine)
For i As Integer = 0 To 9
Dim ln As New OnLine(A, B)
ln.Transform(xform)
lst.Add(ln)
Next
Now, ln is constructed not just once, but whenever the loop runs. And every time it is constructed, a new piece of memory is reserved for it and a new address is created. So now the list memory layout is:
[0] = "24 Bell Ave."
[1] = "12 Pike St."
[2] = "377 The Pines"
[3] = "3670 Woodland Park Ave."
[4] = "99 Zoo Ln."
[5] = "13a District Rd."
[6] = "2 Penny Lane"
[7] = "10 Broadway"
[8] = "225 Franklin Ave."
[9] = "420 Paper St."
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
Added by David Rutten at 6:26am on September 9, 2010