ou will see all of the available components on a ribbon at once so there is no need to keep clicking drop down menus.
It's all about discoverability with GH. What if you're a beginner and don't know about the Create Facility (dbl click canvas) how can you find Extr?
Even if you hover over every component or use the drop down lists you will not see the name Extr appear anywhere.
Sure it makes sense that Extr is short for Extrude but it's also the Nick Name of Extrude to Point component
So you can easily miss the fact that one has a Distance Input verses a Point Input.
I think I made the move to Icons around about the move from version 0.5 to 0.6, possibly before. I initially thought that I would go back to text because I loved the mono chromatic look of the text but I soon realised that Icons were the way forward. The greatest benefit is speed. You don't need to digest and decipher every component (which is written 90 degrees to the norm).
I'm not saying you should move to Icons forthwith but at least consider that once you have a better knowledge and understanding of GH, Icons will set you free.
My top ten tips that I would highly recommend to anyone wanting to better themselves with GH.
1) Turn on Draw Icons
2) Turn on Draw Fancy Wires
3) Turn on Obscure Components
4) Use the Create Facility like a Command Line eg "Slider=-1<0.75<2" or "Shiftlist=-1"
5) Use Component Aliases to customise your use of the Create Facility eg giving the Point XYZ component an alias of XYZ will bring it up as the first option on the Create Facility as opposed to the other possibilities.
6) Try to answer other people's questions even if it's not relevant to your own area. By looking into solving a problem outside of your comfort zone and then posting your results it is very rewarding but it also lets you see the other approaches that get posted in a new light.
7) Take the time to understand Data/Path structures.
8) Buy a second monitor - There is nothing that can compare to real estate when working in Grasshopper.
9) Read Rajaa Issa's Essential Mathematics
10) Pick a panel in a tab on the ribbon and get to know every component inside and out and then move on. Start with the Sets Tab > List Panel…
y in English. ○Presenter
Robert (Bob) McNeel (McNeel & Associates founder) Robert (Bob) McNeel is the founder and president of Robert McNeel & Associates (RMA). Founded in 1978, RMA originally focused on developing accounting software for accounting, architecture, engineering, and other personal services firms. Within a few years, RMA expanded its services to include selling and supporting microprocessor-based engineering and design software including AutoCAD. By 1985, the main focus of the business had shifted to AutoCAD sales, service, training, and software development. Bob McNeel grew up in the mountains of southern Washington State on a subsistence dairy farm. To pay for college, he worked in construction as a carpenter, welder, and cement finisher. Bob has a BA in Accounting from Washington State University. Prior to founding McNeel & Associates, he was a practicing Certified Public Accountant and the comptroller for a large construction company in Spokane. Andrés González (Rhino Fablab director) Andrés is a software trainer and developer since the 1980s. He has developed applications for diverse design markets as well as training materials for different CAD and Design software including the community of training materialswww.Rhino3D.TV Andrés has been working with the Rhino Team since the very early stages. He is now the head of the McNeel Southeast US & Latin American Division. He is the worldwide director of the digital fabrication community called RhinoFabLabwww.RhinoFabLab.com as well as the Generative Jewelry & Fashion Design community GJD3D www.GJD3d.com and Generative Furniture Design community GFD3D www.GFD3d.com 1981 -1985 University of North Carolina at Charlotte N.C. - EE.UU. B.S., Bachelor of Science in Engineering
…
Added by Yusuke Oono at 9:28pm on October 16, 2013
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
ld be the best UI.
I think difference is made by 'Slider = 10' vs 'Slider = 10.000' more than by simple input/component initialization so, why to stop when it could be even more powerful?
Slider = 0 To 5 --- Slider in [0, 5]
Slider = {3; 0 To 5}
Slider = {3;0;5}
Slider = 3;0;5
Slider = 3 0:5
Slider = 3,0,5
Slider = 3 0 5 --- Value and range (min max)
3 0.0 5 --- 3.0 0.0 5.0
3 0 5.0 --- 3.0 0.0 5.0
3.0 0 5 --- 3.0 0.0 5.0
-1 0 5 --- 0 0 5 (-1 -1 5)
6 0 5 --- 5 0 5 (6 0 6)
Slider = 0:2:6 --- Even numbers: 0, 2, 4, 6.
Slider = 1:2:7 --- Odd numbers: 1, 3, 5, 7.
0:2:5 --- 0:2:4 (or 0:2:6)
3:2:8 --- 3:2:7 (or 3:2:9)
3 1:2:7 --- 1 3 5 7 (value 3)
Bang! = 7 --- 7 outputs
Merge = 5 --- 5 inputs
What's your opinion about Bang! = 7? As it's setting number of inputs, should it use different format? Bang! 7? Bang! (7)? Bang! i7?
+ * - / \ % ^ & | ! = > --- Addition, Multiplication, Subtraction, Division, Integer Division, Modulus, Power, AND, OR, NOT, Larger than, &c.
= could be a problem.
\ Integer division or Set difference?
! could be NOT but also Factorial.
| could mean intersection.
& could mean concatenate.
1+ --- Addition: input A = 1
2* --- Multiplication: input A = 2
+{0,1,1} --- Addition: input B = {0,1,1}
0-, 1/, 2^, 10^, e^ have their own components
Flatten = {7} or Flatten = 7 --- Input P = {7} (off-topic: Why can’t P be a list?)
Pt = {1, 2, 3} --- Point XYZ, X = 1, Y = 2, Z = 3.
Swatch = 129,239,231 (102)
Swatch = 129 139 231 102
F2 = "x^2+y"
"List Length" and "List Insert" don't work properly: "Value List" is choosen. Why? What's the reason to this choice? Well, I'd like to know how the whole thing (search by keywords) works, David.
Name and nickname can be now used as keywords. "Larger" works for ">" but "greater" doesn't. Could it be improved? Could synonyms be used? Could a short description even be used (I know this could be a bit weird)?
more than --- >
more or less --- Similarity
more less --- Similarity
red green --- Sets.List components should be showed
lightning --- Split Tree
What about use Curve.Analysis or Math.Boolean to display those Tab.Panel components? Param, Math, Sets, Vector? Primitive, Special, Util? Tab, Panel, and Tab.Panel as keywords.
At the moment that I write this, I check that ignoring accents in keywords has almost been included (0.8.0009): p`anel, pañel, pánel --- panel (almost)
Shouldn’t 'Dom2' work for Dom²?
What about nested search? You type some keywords (say 'Params' or 'Params.Geometry', or 'red green', or 'lst') and then you make a fine-tunning search over previous results/keywords. Tab.Panel and/or nested geometry could be useful when search by plug-in is desired or when you want to search among .ghuser components (first 'ghuser' or 'Extra.MyPlugIn' or 'lst' keyword and then fine-tunning, specific, search).
Is 'list length' performing this nested search right now ('lst' > 'length')? Anyway, I am thinking about UI (graphical) changes; successive searches.
As I said, description (and even words from the help info) could be used to search. What about "some kind of tags"? I mean that if 'list l' to finally choose List Length has been used for a while, that could be learned. Eventually, an XML file could store these tags, so you could even edit them. That could implement description, name, nickname, help info, Tab.Panel, .ghuser, synonyms (lots of them), tags/shortcuts or wathever.
How could flatten/graft/reverse be used? Initialize graft+Simplify or graft+Bang! could be really useful.
What about expressions? I don't how could it be done properly: would Slider = x^2 (expression) work? I mean, aren't expressions parsed when initializing?
Is Panel somehow doing this? 'panel = wathever' always suppose that wathever is a string, so you can't use 'panel = <pi>'. Sets.Strings components also do this.
I've been about to write several paragraphs about height/width (resizable components: Panel, Graph Mapper, Slider, &c.), input/output names (Scripts, F components; or any component with editable input/output names), orientation (Scribble), type hint and access option, nickname, &c. but, to sum up: being able to set any property when initializing would be really useful. I'd like to know the best choice of syntax but I'm sure that, David, you're closer to the answer. What do you think about this?
Slider: 3 0 5 "MySlider" "Slider^2"
Panel: "This is the content" "This is the title"
VB: "N" List Integer 7 "r" Item Double
Addition: A 1 B 2
I guess that any unified syntax would be elegant and useful, but additional ad hoc syntax (per component) could be even better (cleaner).
What about use lists of values? I'm not sure about format: panel = ("Hello", "Bonjour", "Hola")? If any valid format/syntax is found, maybe more sophisticated fetaures could be achieved: panel = {0;0} ("A", "B", "C") {0;1} ("1", "2", "3") How would you like this to be implemented?
There is a much simpler and interesting feature that would be useful, in my opinion: being able to initialize more than one component. I mean say 7xSlider = 10.0 and get 7 sliders and I also mean multiline (multi-component) initialization: Ctrl+Intro when you want to start a new line and Intro (or even some Accept/Cancel buttons when you activate multiline mode) to initialize (every line/component), for example. I mean:
3 x Slider = 1
Panel
Mass addition
Panel
And the whole bunch of components that were in mind (pre-thinked definition) is initialized. It speeds up the workflow, making more dynamic to add components that are only available via the drop-down panels.
Should this multiplier be something like a text box adjacent to search field more than '7x'?
These are some of my thoughts about intitializing. Please let me know your opinion :]
…
lly it should not make much of a difference - random number generation is not affected, mutation also is not. crossover is a bit more tricky, I use Simulated Binary Crossover (SBX-20) which was introduced already in 1194:
Deb K., Agrawal R. B.: Simulated Binary Crossover for Continuous Search Space, inIITK/ME/SMD-94027, Convenor, Technical Reports, Indian Institue of Technology, Kanpur, India,November 1994
Abst ract. The success of binary-coded gene t ic algorithms (GA s) inproblems having discrete sear ch sp ace largely depends on the codingused to represent the prob lem variables and on the crossover ope ratorthat propagates buildin g blocks from pare nt strings to childrenst rings . In solving optimization problems having continuous searchspace, binary-co ded GAs discr et ize the search space by using a codingof the problem var iables in binary st rings. However , t he coding of realvaluedvari ables in finit e-length st rings causes a number of difficulties:inability to achieve arbit rary pr ecision in the obtained solution , fixedmapping of problem var iab les, inh eren t Hamming cliff problem associatedwit h binary coding, and processing of Holland 's schemata incont inuous search space. Although a number of real-coded GAs aredevelop ed to solve optimization problems having a cont inuous searchspace, the search powers of these crossover operators are not adequate .In t his paper , t he search power of a crossover operator is defined int erms of the probability of creating an arbitrary child solut ion froma given pair of parent solutions . Motivated by t he success of binarycodedGAs in discret e search space problems , we develop a real-codedcrossover (which we call the simulated binar y crossover , or SBX) operatorwhose search power is similar to that of the single-point crossoverused in binary-coded GAs . Simulation results on a number of realvaluedt est problems of varying difficulty and dimensionality suggestt hat the real-cod ed GAs with t he SBX operator ar e ab le to perform asgood or bet t er than binary-cod ed GAs wit h t he single-po int crossover.SBX is found to be particularly useful in problems having mult ip le optimalsolutions with a narrow global basin an d in prob lems where thelower and upper bo unds of the global optimum are not known a priori.Further , a simulation on a two-var iable blocked function showsthat the real-coded GA with SBX work s as suggested by Goldberg
and in most cases t he performance of real-coded GA with SBX is similarto that of binary GAs with a single-point crossover. Based onth ese encouraging results, this paper suggests a number of extensionsto the present study.
7. ConclusionsIn this paper, a real-coded crossover operator has been develop ed bas ed ont he search characte rist ics of a single-point crossover used in binary -codedGAs. In ord er to define the search power of a crossover operator, a spreadfactor has been introduced as the ratio of the absolute differences of thechildren points to that of the parent points. Thereaft er , the probabilityof creat ing a child point for two given parent points has been derived forthe single-point crossover. Motivat ed by the success of binary-coded GAsin problems wit h discrete sear ch space, a simul ated bin ary crossover (SBX)operator has been develop ed to solve problems having cont inuous searchspace. The SBX operator has search power similar to that of the single-po intcrossover.On a number of t est fun ctions, including De Jong's five te st fun ct ions, ithas been found that real-coded GAs with the SBX operator can overcome anumb er of difficult ies inherent with binary-coded GAs in solving cont inuoussearch space problems-Hamming cliff problem, arbitrary pr ecision problem,and fixed mapped coding problem. In the comparison of real-coded GAs wit ha SBX operator and binary-coded GAs with a single-point crossover ope rat or ,it has been observed that the performance of the former is better than thelatt er on continuous functions and the performance of the former is similarto the lat ter in solving discret e and difficult functions. In comparison withanother real-coded crossover operator (i.e. , BLX-0 .5) suggested elsewhere ,SBX performs better in difficult test functions. It has also been observedthat SBX is particularly useful in problems where the bounds of the optimum
point is not known a priori and wher e there are multi ple optima, of whichone is global.Real-coded GAs wit h t he SBX op erator have also been tried in solvinga two-variab le blocked function (the concept of blocked fun ctions was introducedin [10]). Blocked fun ct ions are difficult for real-coded GAs , becauselocal optimal points block t he progress of search to continue towards t heglobal optimal point . The simulat ion results on t he two-var iable blockedfunction have shown that in most occasions , the sea rch proceeds the way aspr edicted in [10]. Most importantly, it has been observed that the real-codedGAs wit h SBX work similar to that of t he binary-coded GAs wit h single-pointcrossover in overcoming t he barrier of the local peaks and converging to t heglobal bas in. However , it is premature to conclude whether real-coded GAswit h SBX op erator can overcome t he local barriers in higher-dimensionalblocked fun ct ions.These results are encour aging and suggest avenues for further research.Because the SBX ope rat or uses a probability distribut ion for choosing a childpo int , the real-coded GAs wit h SBX are one st ep ahead of the binary-codedGAs in te rms of ach ieving a convergence proof for GAs. With a direct probabilist ic relationship between children and parent points used in t his paper,cues from t he clas sical stochast ic optimization methods can be borrowed toachieve a convergence proof of GAs , or a much closer tie between the classicaloptimization methods and GAs is on t he horizon.
In short, according to the authors my SBX operator using real gene values is as good as older ones specially designed for discrete searches, and better in continuous searches. SBX as far as i know meanwhile is a standard general crossover operator.
But:
- there might be better ones out there i just havent seen yet. please tell me.
- besides tournament selection and mutation, crossover is just one part of the breeding pipeline. also there is the elite management for MOEA which is AT LEAST as important as the breeding itself.
- depending on the problem, there are almost always better specific ways of how to code the mutation and the crossover operators. but octopus is meant to keep it general for the moment - maybe there's a way for an interface to code those things yourself..!?
2) elite size = SPEA-2 archive size, yes. the rate depends on your convergence behaviour i would say. i usually start off with at least half the size of the population, but mostly the same size (as it is hard-coded in the new version, i just realize) is big enough.
4) the non-dominated front is always put into the archive first. if the archive size is exceeded, the least important individual (the significant strategy in SPEA-2) are truncated one by one until the size is reached. if it is smaller, the fittest dominated individuals are put into the elite. the latter happens in the beginning of the run, when the front wasn't discovered well yet.
3) yes it is. this is a custom implementation i figured out myself. however i'm close to have the HypE algorithm working in the new version, which natively has got the possibility to articulate perference relations on sets of solutions.
…
ther math and logic. i can usually conceptualise what i want to do and cobble some semi working thing together but don't know which components to use and how to patch it. so i'm super happy to have someone who knows what he's doing to find this interesting.
and i'm glad you mention the fanned frets again, there is one input parameter that's still missing for the multiscale frets to be fully parametric, it's the angle of the nut or which fret should be straight. it depends a bit on personal preferences and playing posture what is more comfortable. so being able to adjust this easily would be cool. again i have no idea how the maths for that work or if you can just rotate each fret the same amount around it's middle point. The input either as fret number (for the straight fret) or as a simple slider from bridge to nut should do as input setting.
Here are the two extremes and the middle ground:
i've been thinkin today while analysing your patches and cleaning up my mess what exactly the monster should do.
Here are the input parameters needed, i think it's the complete list
scale length low E string
scale length high e string
fret angle/straight fret
string width at nut
string width at bridge
number of frets
fretboard overhang at nut (distance from string to fretboard bounds)
fretboard overhang at last fret
string gauges
string tensions
fretboard radius at nut (for compound radius fretboard radius at bridge is calculated with the stewmac formula)
fretwire crown width
fretwire crown height
action height at nut (distance between bottom of string and fretwire crown top)
action height at last fret
pickup 1 neck position
pickup 2 middle position
pickup 3 bridge position
nut width
the pickup positions should be used to draw circles for the magnet poles on each string so they are perfectly aligned and can be used for the pickup flatwork construction. ideally they would need a rotation control aligning the center line of the pickup so it's somewher between the last fret angle and bridge angle. personally i do this visually depending on the design i'm looking for, some people have huge theories on pickup positioning but personally i don't believe in it.
that should result in everything needed to quickly generate all the necessary construction curves or geometry for nut/fingerboard/frets/pickups. this is the core of what makes a guitar work, the more precise this dynamic system is the better the guitar plays and sounds.
i posted another thread trying to understand how i could use datasets form spreadsheets,databse, csv to organize the input parameters. What would make sense for the strings for example is hook into a spreadsheet with the different string sets, i attached one for the d'Addario NYXL string line which basically covers all combos that make sense.
The string tension is an interesting one, and implmenting it would sure be overkill albeit super interesting to try. it should be possible to extrapolate from the scale length of each string what the tension for a given string gauge of that string would be so that you could say 'i want a fully balanced set' or 'heavy top light bottom) and it would calculate which SKU from d'addario would best match the required tension. All the strings listed in the spreadsheet are available as single strings to buy.
i'm trying to reorganize everything which helps me understand it. i just discovered the 'hidden wires' feature which is great since once i understood what a certain block does or have finished one of my own, i can get the wires out of the way to carry on undistracted. a bit risky to hide so many wires but it makes it so much easier not to get completely lost :-)
btw, the 'fanned fret' term is trademarked, some guy tried to patent it in the 80's which is a bit silly since it has been done for centuries. there is a level of sophistication above this as well, check out http://www.truetemperament.com/ and that really is something else. it really is astounding how superior the tuning is on those wigglefrets, the problem is that it's rather awkward for string bending and also you can't easily recrown or level the frets when they are used. …
e matching with a dedicated component which creates combinations of items. You can find the [Cross Reference] component in the Sets.List panel.
When Grasshopper iterates over lists of items, it will match the first item in list A with the first item in list B. Then the second item in list A with the second item in list B and so on and so forth. Sometimes however you want all items in list A to combine with all items in list B, the [Cross Reference] component allows you to do this.
Here we have two input lists {A,B,C} and {X,Y,Z}. Normally Grasshopper would iterate over these lists and only consider the combinations {A,X}, {B,Y} and {C,Z}. There are however six more combinations that are not typically considered, to wit: {A,Y}, {A,Z}, {B,X}, {B,Z}, {C,X} and {C,Y}. As you can see the output of the [Cross Reference] component is such that all nine permutations are indeed present.
We can denote the behaviour of data cross referencing using a table. The rows represent the first list of items, the columns the second. If we create all possible permutations, the table will have a dot in every single cell, as every cell represents a unique combination of two source list indices:
Sometimes however you don't want all possible permutations. Sometimes you wish to exclude certain areas because they would result in meaningless or invalid computations. A common exclusion principle is to ignore all cells that are on the diagonal of the table. The image above shows a 'holistic' matching, whereas the 'diagonal' option (available from the [Cross Reference] component menu) has gaps for {0,0}, {1,1}, {2,2} and {3,3}:
If we apply this to our {A,B,C}, {X,Y,Z} example, we should expect to not see the combinations for {A,X}, {B,Y} and {C,Z}:
The rule that is applied to 'diagonal' matching is: "Skip all permutations where all items have the same list index". 'Coincident' matching is the same as 'diagonal' matching in the case of two input lists which is why I won't show an example of it here (since we are only dealing with 2-list examples), but the rule is subtly different: "Skip all permutations where any two items have the same list index".
The four remaining matching algorithms are all variations on the same theme. 'Lower triangle' matching applies the rule: "Skip all permutations where the index of an item is less than the index of the item in the next list", resulting in an empty triangle but with items on the diagonal.
'Lower triangle (strict)' matching goes one step further and also eliminates the items on the diagonal:
'Upper Triangle' and 'Upper Triangle (strict)' are mirror images of the previous two algorithms, resulting in empty triangles on the other side of the diagonal line:
…
it seems that was this. Now all is working fine !
Glad that it worked! But I am still a bit worried. Gismo components only modify the gdal-data/osmconf.ini file and no other MapWinGIS file. So your MapWinGIS installation files should not be compromised. The fact that you did not get the "COM CLSID" error message when running the "Gismo Gismo" component suggests that MapWinGIS has been properly installed. So I wonder if the cause for the permanent "invalid shapes" warning has again something with the fact that your system is again not allowing the MapWinGIS to properly edit the osmconf.ini. Maybe this problem will appear again, and again, and reinstallation of MapWinGIS every time can be somewhat bothersome.
- About the terrain generation, is it possible to have the texture from google or other provider mapped onto the terrain surface from gismo component ? (Same as using the ladybug terrain generator in fact). I try to used the image extracted by ladybug component and then applied it to the gismo terrain but the texture is rotated by 90°.
The issue with the rotation can be solved by swapping/reversing the U,V directions of the terrain surface. A slightly more important issue is that terrain surface generated with Gismo "Terrain Generator" component might have a bit smaller radius than what the radius_ input required. This stems from the fact that the terrain data first needs to be downloaded in geographic coordinate system, and then projected. Some projecting issues may occur at the very edges of the projected terrain, so I had to slightly cut out the very edges of the terrain which results in the actual terrain diameters being slightly shorted in both directions. This means that if you apply the same satellite image from Ladybug "Terrain Generator" component to Gismo "Terrain Generator" component the results may not be the same.I attached below a python component which tries to solve this issue by extending the edges of Gismo "Terrain Generator" terrain, and then cutting them with the cuboid of the exact dimensions as the radius_ input. Have in mind that this extension of the original terrain at its edges is not a correct representation of the actual terrain in that location. But rather just an extension of the isoparameteric curve of the terrain surface. So basically: some 0 to 10% (0 to 10 percent of the width and length) of the terrain around all four edges is not the actual terrain for that location, but rather just its extension.The python component is located at the very right of the definition attached below.
Also, if you would like to use the satellite images from Ladybug "Terrain Generator" component along with "OSM shapes", sometimes you may find slight differences in position of the shapes. This is due to openstreetmap data not being based on Google Maps (that's what Ladybug "Terrain Generator" component is using), but rather on Bing, MapQuest and a few others.
- About the requiredKeys_ input of OSM shapes, I understand what you mean and your advice, but in most cases I use it, the component was working fine even without input. I think it's better to extract all tags, values and keys of the selected area, instead of searching for specific ones as I try to find all data related to what I want after, isn't it ? To check what keys are present on the area also.
Ineed, you are correct.I though you were trying to only create a terrain, 3d buildings and maybe find some school or similar 3d building, for these two locations. The recommendation I mentioned previously is due to shapefiles having a limit (2044) to how many keys it can contain. This requires further testing of some big cities locations with maybe larger radii, which I haven't performed due to my poor PC configuration. But in theory, I imagine that it may happen that a downloaded .osm file may have more than 2044 keys. In that case shapefile will only record 2044 of them, and disregard the others. That was my point.But again 2044 is a lot of keys, and I haven't been checking much this in practice. For example, when I set the radius_ to 1000 meters, and use your "3 Rue de Bretonvilliers Paris" location I get around 350 something keys, which is way below the 2044.Another reason why one should use the requiredKeys_ input is to make the Gismo OSM components run quicker: for example, the upper mentioned 350 something keys will result in 350 values for each branch of the "OSM shapes" component's "values" output.Which means if you have 10 000 shapes, the "OSM shapes" component will have 10 000 branches with 350 items on each branch (values). This can make all Gismo OSM components very heavy, and significantly elongate the calculation process.With requiredKeys_ input you may end up with only a couple of tens of items per each branch.Sorry for the long reply.…
Added by djordje to Gismo at 8:57am on June 11, 2017
ating to new speakers.
For more information: https://medium.com/@carspeakerland/a-guide-to-the-simple-way-difference-in-car-speakers-2-way-3-way-4-way-25e0bf215b00
Adding new speakers for your automobile could improve the sound quality dramatically. Some sound technicians say it is the number-one update you may make to improve the overall quality of your vehicle.
"They do not care how it sounds. Speakers are often form of continue on the list. Updating to new speakers offers you a much fuller sound."
There is a whole lot to pick from in regards to car speakers. (Photo from Eldon Lindsay)
"New speakers will make a greater fidelity and clarity of sound," states Robert Nevitt, proprietor of Audio Electronics at Indianapolis. "The audio is more different without distortion. People will not get bored listening to it."
Cook says customers need to pick the type of sound they enjoy. The very first thing Cook does having a customer is sit in the car together to talk about their personal taste.
"Everybody's ear is different," he states. "That which I believe sounds great, you might believe is dreadful. It is a fantastic idea to get outside and listen to everything you enjoy and do not like about doing it."
When you've discovered a sound you want, you are going to discover the sky's actually the limitation in regards to purchasing car speakers. There are scores of manufactures and models, sizes and power levels to select from.
Columbus Car Audio & Accessories offers three types of automobile speakers to pick from: complete array speakers, component speakers along with coaxial speakers.
• Total range speakers arrive with a tweeter to make to your high-pitched sounds along with a woofer for those lows. This option offers a number of different sizes.
• Unit speakers, nonetheless, include separate tweeters and woofers.
• Coaxial speakers arrive with a tweeter plus motorist.
When you've selected a type of automobile speaker, you are going to want to determine how many you desire. Cook states some cars arrive with as little as just two speakers, whereas bigger, luxury vehicles might have too many 32. He adds a normal sedan generally has four. What are The Speaker Sizes in My Car | Speaker Size for My Car
"It simply depends if you would like to replace all of these," Cook says. "I would advise doing all of four. If you are budget-minded, I'd begin with the ones at the front. That is where you are at. And you are likely to be at the automobile 100 percent of their moment."
Subwoofers are designed to reproduce low bass frequencies also may be included with new speakers or could be added separately to existing car speakers.
"Many speakers can not play down low in these frequencies such as a subwoofer may," Cook says.
Related Article
Wondering about speakers? Below are a few techniques to establish a home entertainment experience whatever your budget.
A speaker update might charge as little as $100 up to a few million dollars depending on the scope of job and type of speaker.
Cook states that the price of a subwoofer can operate as low as $37. Columbus Car Audio & Accessories sells a subewoofer bundle that includes an amplifier and a enclosure for about $ 299.
To get a set of automobile speakers, Columbus Car Audio & Accessories begin prices at $39, with an average price tag of about $70 for setup. Adding an anti-vibrator into a set of speakers prices an additional $25.
Nevitt, meanwhile, fees as little as $99 to get a set of "some good speakers." The price of one hour of installion, that is typically how long it takes to put in a set of speakers, is 67.
However, most customers spend far more.
"Paying a total amount of 800 to $1000 isn't from this world of possibility," Nevitt states. "A price somewhere in the center could be $400 or $500."
Cook says several vehicle speaker technicians began with DIY projects and adds there is nothing wrong with trying to set up car speakers all on your own. But you are going to want the correct tools for your job along with just a little understand. Installing speakers requires carrying out your car door.
See Also: https://www.scoop.it/t/how-to-choose-best-car-speakers-6x9-inch-6-5-inch-6x8-inch-4-inch
Choosing a professional to set up speakers ensures that the job is done correctly.
"If you do it yourself, then you might wind up breaking something. That is some thing we do everyday. I am not planning to inform you we will not violate something. But we will look after it if we perform. We all do so with being honest and up front with people."
If you are getting speakers set up, experts say to expect to place an appointment to the setup. …