dy for a wall where we want to analyze its openings. I made a parametric wall that then get's analyzed with different geometries and the idea was just to leave it there for the weekend as it morphed through different iterations. However, after successfully running a test simulation on my pc (just with one iteration), it fails to run the same test on the workplace computer. Any help would be greatly apprecated! Here is the following error:
Sorry! But the number of available CPUs on your machine is 4.
Honeybee set the number of CPUs to 4.
Grid-based Radiance simulation
The component is checking ad, as, ar and aa values. This is just to make sure that the results are accurate enough.
Good to go!
Current working directory is set to: C:\ladybug\Parametric_Shading_Wall\psw_z0.25_t.025_y.2_r90_m3_lux\gridBasedSimulation\
Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
Runtime error (PythonException): Failed to read the results!
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
rtrace: fatal - (psw_z0.25_t.025_y.2_r90_m3_lux_RAD.oct): truncated octree
PS. It says to see line 336…
ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the
ss lots of questions,Hope guys show me some more different ways to figure out thoes kinds of problems,Thanks.
That is a construction project,the balconies should be overhang between 1 to 3 meters.
Program A is a patten consist of increasing balconies as the floors get upper.(In the picture is 29 at the first floor and ended with 2 more balconies for each floor, )Each part for a different floor,the twelfth floor have 29+(12-1)*2=51 balconies.
Questions From A,
A1:How to use the {(series)} to creat this atrium,As the floors increase the number of the balconies change by arithmetic progression.
A2:How to control the angle of the balconies,both the angle with floor and the balconies ending part.
Program B is use line to shape the commercial atrium,program A is more small pieces of rectangles.The {(TweenCrv)} command.
Questions From B,
B1:How to draw random points between the 1 to 3 meters region of the balcony,And those point form a shape also belongs to that region.
B2:Use a curve or other ways to control the changing speed of each floors' balcony.Right now the balcony is a Linear change.
Thanks for your Help.
Q1:Is there a way in Grasshopper to control the model to Modulus,less different unit parts to build such a Atrium.(For Exanple,only use 900mm and 600mm two different width of the Glass railings to bulid the model A OR B)…
te some cut sheets, but not to optmize material, rather define some cut lines. Everything that I am cutting is made of planar wood elements, but there are very specific geometries (mostly straight lines) and I have to put tolerances and radiasas at the corners in order to cut on the cnc mill. Spending time to figure out how to automate is necessary, but I am stuck!
One thing the definition is doing is taking my brep modeled components in rhino and makking them into 2d close curves and laying them side by side. It works...not ideal as its not layed out in a sheet, but that is not the most important part.
Another particular problem is that you will see some notches in the curves, which other pieces will slip into, so different slots need different specific offsets (making them larger) as a toelrance to allow for material play. This I don't even know how to set up so maybe it will just have to wait.
THE MAIN QUESTION, and super important would be, LIFESAVER:
At all 'inward' corners...which I think will always mean concave corners (most are 90 degrees, but are within to sides, instead of a corner sticking out). I'm sure its obviousy, but the reason being the outward corners a circular dril bit can cut, but inward ones need an arc profile extended beyond where the corner of the other piece will fit into. The drill bit i am using is 6mm, so 6mm diamters arcs is what i'm working with.
I have managed to put such an arc at every vertices of each cut piece. The problem being some stick outward isntead of cutting into the piece. So each one needs to be orieneted correctly. Ideally they would also only draw into inward corners, but I can always delete them out. I think maybe I am missing a more logical mathematical way of defining?
For these geometries it is not very important which side the half circle arc in on in the inward corners, but I also have some geometries that I will have to control where the circles face according to the rest of the cut piece.
The cutouts in the middle of the pieces that are curves do not need such corners obviously.
The picture is an example drawn
I hope this isn't too specific and long. in general though automating fabrication, and controling pracitcal math and orientation problems like this is itnersting to me!
THANKS…
tema della modellazione parametrica con Grasshopper. Questa plug-in di Rhino consente di progettare, confrontandosi con un contesto evolutivo, attraverso la comprensione e l'utilizzo di parametri e componenti che influenzano la rappresentazione e la rendono dinamica componendo algoritmi. Nel corso verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse.
Le informazioni teoriche saranno fornite in maniera accelerata ma organica e contestuale agli argomenti elencati. Per massimizzare i risultati, le lezioni saranno accompagnate da piccole esercitazioni pratiche.Argomenti trattati:- Introduzione alla progettazione parametrica: teoria, esempi, casi studio- Grasshopper: concetti base, logica algoritmica, interfaccia grafica- Nozioni fondamentali: componenti, connessioni, data flow- Funzioni matematiche e logiche, serie, gestione dei dati- Analisi e definizione di curve e superfici- Definizione di griglie e pattern complessi- Trasformazioni geometriche, paneling- Attrattori, image sampler- Data tree: gestione di dati complessiStrutturaIl corso ha una durata di 16 ore programmate nell'arco di 2 giornate con i seguenti orari: i giorni 10/11 e 11/11 dalle 10,00 alle 19,00 con pausa pranzo di un'ora.
PrerequisitiPer affrontare il corso è richiesta una conoscenza di base del software Rhino attraverso esperienze teoriche e pratiche. I partecipanti dovranno venire muniti di proprio laptop e con software Rhinoceros 5 o Rhinocero 4 perfettamente funzionanti.Alla fine del corso, verrà rilasciato l’attestato di partecipazione ad un corso qualificato certificato dalla McNeel, valido anche per l’ottenimento di crediti formativi universitari.
…
, presso la sede Manens-Tifs, nei giorni 26,27 e 28 maggio 2016.
Il comfort visivo e la gestione dell’illuminazione naturale in relazione al risparmio energetico diventano sempre più rilevanti per una progettazione innovativa degli edifici. Ad esempio, il nuovo protocollo LEED 4 riconosce crediti per le simulazioni di daylighting e conferma l’importanza degli aspetti progettuali per “collegare gli occupanti con lo spazio esterno, rinforzare i ritmi circadiani, ridurre i consumi di energia elettrica per l’illuminazione artificiale con l’introduzione della luce naturale negli spazi”. Senza strumenti software per la simulazione della luce non è possibile ottenere risultati di qualità. Radiance è un software validato, utilizzato sia a livello di ricerca che dai progettisti ed è tra i più accurati per la simulazione professionale della luce naturale e artificiale. Non ha limiti di complessità geometrica ed è adatto a essere integrato in altri software di calcolo e interfacce grafiche. Queste ultime facilitano le procedure di programmazione. Le principali e più versatili saranno oggetto del corso (DIVA4Rhino e Ladybug+ Honeybee, plug-in per Grasshopper e Rhinoceros 3D).
Il corso è rivolto a progettisti e ricercatori che vogliano acquisire strumenti pratici per la simulazione con Radiance al fine di mettere a punto e verificare le soluzioni più adatte alle proprie esigenze. Sono previste lezioni di teoria e pratica con esempi ed esercitazioni volte a coprire in modo dimostrativo ed interattivo i concetti trattati.
Le domande di iscrizione devono essere presentate entro il 12 maggio 2016.
La brochure con i contenuti del corso e tutte le informazioni sono disponibili su questo link
Il corso è sponsorizzato da Pellinindustrie.…
la plug-in Grasshopper. L'utilizzo dei due software permette di esprimere al massimo le qualità e le potenzialità della modellazione Nurbs e Mesh attraverso l'esplicitazione di algoritmi compositivi. Il corso introdurrà alle strategie di disegno digitale finalizzate alla progettazione di forme complesse utilizzando un caso studio proprio del mondo dell’architettura. Si affronterà l'intero processo di modellazione, partendo dal disegno di una superficie complessa; su questa verranno applicati algoritmi generativi per la tassellazione e la riduzione della complessità in elementi ottimizzati per la produzione. Una delle finalità del corso è quindi l’ideazione di superfici complesse, approfondendo metodi di fabbricazione digitale.
Il metodo del corso è basato sulla risoluzione di un esercizio step-by-step accompagnato da approfondimenti teorici che porteranno il partecipante all'autonomia nell'utilizzo di Rhinoceros e Grasshopper. Durante il percorso verranno illustrati applicativi avanzati del software per la pannellizzazione delle superfici (Paneling-Tools). Con il processo illustrato nel corso si vuole rendere il lavoro del progettista più facile grazie alla riduzione dei tempi che portano dal disegno dell’idea, alla costruzione delle forme.
Nella prima parte del corso verranno illustrati metodi avanzati di generazione delle superdici per una modellazione controllata delle FREE FORM. per arrivare a questa condizione sarà necessario approfondire i concetti di spazio parametrico monodimensionale (per la trasformazione lungo le curve) e spazio parametrico bidimensionale (per la trasformazione lungo le superfici).
Nella seconda parte del corso si insegneranno i metodi di esplicitazione degli algoritmi, applicati ad esercizi base utili alla comprensione di Grasshopper; poi la plug-in verrà specializzata affrontando editing, trasformazioni complesse e il problema della tassellazione delle superfici.Buona parte del tempo sarà dedicato alla costruzione di geometrie responsive e alla gestione del flusso dati per l'ottimizzazione del lavoro.…
ucation Research Group in Urban Building Services at the Technical School of Architecture of Madrid (ETSAM), Spain.
The aim of the Research is to generate a digital support for sketching urban and architecture net systems and its interrelationships between them for academic researches.
IE Group Members:
-Sergio del Castillo Tello (Doctor No, Lead Programmer)
-Pablo Gómez Rodríguez (Programmer)
-Prof. Miguel Angel Gálvez
(Architect ETSAM, Building Services Department)
-Manuel Rodríguez Pérez
(Architect ETSAM, Building Services Department)
-Prof. Jose Tovar Larrucea
(Architect ETSAM, Building Services Department, Professor Ad Honorem)
The development of this tools, which are in its very early stage, is planned to take part within the Innovative Group Education research program; We expect to share the results with the community through this group as we achieve them, in case that some of you are interested, or if just want to get involved somehow. Cheers!
…
Added by Doctor No at 4:24am on September 30, 2013
ting at multiple geometries in the same location. I simply sorted the list of values and used the Delete Consecutive component. This potentially rearranges the order of values but I don't think that matters in your case. I also threw in an Int component which actually seems to make a difference (try sidestepping it and you will see!).
2-I flattened the output of the mesh component before sending it to union. This ensures that the original mesh is booleaned once with all the components rather than individually with each of the 86 components.
Is this what the result should look like?
One suggestion for future postings: when referencing geometry in rhino, it often helps if you attach your rhino file as well so people don't have to guess where you are starting from.
If you have further questions, just ask ;-)
cbass…